Fabrication of the Textured Ni-9.3at.%W Alloy Substrate for Coated Conductors

Publication: Research - peer-reviewJournal article – Annual report year: 2011

View graph of relations

It is difficult to obtain a sharp cube texture in the Ni-9.3at.% W substrate used for coated conductors due to its low stacking fault energy. In this paper, the traditional cold rolling procedure was optimized by introducing an intermediate recovery annealing. The deformation texture has been improved after three recovery annealing cycles at 500$^{\circ}{\rm C}$ for 2 h during the cold rolling process. After optimized recrystallization annealing, a Ni-9.3at.% substrate with a cube texture content of 87.7% $( has been obtained. The effect of the intermediate annealing on cube texture formation is attributed to the improved deformation texture and to the enhanced pre-existing cube oriented structure in the deformed matrix.
Original languageEnglish
JournalI E E E Transactions on Applied Superconductivity
Publication date2011
Volume21
Journal number3
Pages2969-2972
ISSN1051-8223
DOIs
StatePublished

Bibliographical note

Copyright 2010 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

CitationsWeb of Science® Times Cited: 3

Keywords

  • Materials characterisation and modelling
Download as:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word

Download statistics

No data available

ID: 5595969