Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2012
The inherent compromise between high stiffness and high damping in viscoelastic materials has been treated theoretically [2, 3] and experimentally . It has been shown that high stiffness and high damping can be realized by Hashin-type composites or Rank-N laminates. However, in order to manufacture such composites it is favorable to obtain single length scale microstructures, i.e. without multiscale structures such that the materials can be manufactured by modern manufacturing techniques. As an example, by the use of e.g. SLM/SLS - Selective Laser Melting/Sintering, an open metallic microstructure can be printed and in a subsequent process the porespace can be filled with a high loss compliant material.
Yi and co-workers  applied topology optimization to design the 2D microstructural layout of a stiff elastic and a soft viscoelastic material constituent in order to obtain high damping, however, without specific focus on neither the theoretical bounds  nor themanufacturability. In this work we extend this work and consider manufacturability by use of various filtering techniques [4, 5]. The inverse homogenization problem is formulated such that the imaginary part of the bulk modulus for the composite is maximized while the real part is constrained from below. This formulation makes it possible to exploit the microstructures related to the upper bound of the imaginary part of the bulk modulus.
Figure 1 shows the bounds on the bulk modulus for a viscoelastic composite using the formulation of  along with preliminary structures obtained using topology optimization. It is seen that for low bulk stiffness, the obtained designs approach the bounds for viscoelastic composites. The theoretical bounds exist for a limited combination of base materials e.g. with equal Poisson’s ratio and isotropic composites. In our work we will, numerically, further exploit the parameter space in order to search for composites that offer favorable compromises between loss and stiffness for different loading scenarios. Further, we will extend the study to three dimensions and in future work we plan to investigate the possibility for using the nonlinear response of viscoelastic materials such as rubber to further enhance the damping capabilities.
|State||Published - 2012|
|Event||8th European Solid Mechanics Conference - Graz, Austria|
|Conference||8th European Solid Mechanics Conference|
|Period||09/07/2012 → 13/07/2012|
This research is conducted within the Innovation Consortium, F.MAT, funded by a grant from the Danish Agency for Science, Technology and Innovation.