Computer vision for focus calibration of photo-polymerization systems

Research output: Research - peer-reviewConference abstract for conference – Annual report year: 2018

View graph of relations

Photopolymerization by mask projection allow for rapid construction of extremely detailed and intricate objects, such as hearing aids. The Technical University of Denmark has long had an interest in applying computervision systems to additive manufacturing systems to increase quality. To obtain the optimal quality for photopolymerization systems, it is paramount that the focal plane is exactly at the build plane. Manually finding the position with optimal focus is an arduous and time-consuming task. Previous attempts at implementing an automatic procedure for finding the optimum focus has failed [1].
In this paper we present an autofocusing solution formask projection based photopolymerisation systems(MPPSs), with ease-of-use equivalent to the autofocus known from an ordinary DSLR-camera. The autofocusing solution has been implemented and tested on the experimental MPPS (Figure 1) at Technical University of Denmark, Department of Mechanical Engineering using a PointGrey Blackfly S BFS-U3-51S5M-C industrial CCD-camera, no lens and pixel size of 3:45μm.The MPPS is built using a Visitech Luxbeam RapidSystem projector of LRS-WQ-HY, with a micromirror size of 7:5μm and depth-of-focus range of ±50μm for the 1:0 magnification filter and ±200μm for the 2:0 magnification filter [2], [3]. The lateral movement of the projector is designed with a motorized projector mount to have a minimum step size of 1:56μm. By projecting an image from the projector up onto the glass plate where the camera is mounted and moving the projector laterally, we are able to implement autofocus. Our autofocus solution allows researchers faster and easier access to building on the MPPS, requiring no training in using calibration software or printer operating procedure outside the standard.
Original languageEnglish
Publication date2018
Number of pages3
StatePublished - 2018
Event2018 ASPE and euspen Summer Topical Meeting - Lawrence Berkeley National Laboratory, Berkeley, United States
Duration: 22 Jul 201825 Jul 2018

Conference

Conference2018 ASPE and euspen Summer Topical Meeting
LocationLawrence Berkeley National Laboratory
CountryUnited States
CityBerkeley
Period22/07/201825/07/2018
OtherJoint Special Interest Group meeting: Additive Manufacturing
Download as:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word

ID: 156615133