Coatings for the NuSTAR mission
Publication: Research - peer-review › Conference article – Annual report year: 2011
Standard
Coatings for the NuSTAR mission. / Christensen, Finn Erland; Jakobsen, Anders Clemen; Brejnholt, Nicolai; Madsen, Kristin K.; Hornstrup, Allan; Westergaard, Niels Jørgen Stenfeldt; Momberg, Joan; Koglin, Jason; Fabricant, Anne M.; Stern, Marcela; Craig, William W.; Pivovaroff, Michael J.; Windt, David.
In: Proceedings of SPIE--the international society for optical engineering, Vol. 8147, No. 1, 2011, p. 81470U-19.Publication: Research - peer-review › Conference article – Annual report year: 2011
Harvard
APA
CBE
MLA
Vancouver
Author
Bibtex
}
RIS
TY - CONF
T1 - Coatings for the NuSTAR mission
A1 - Christensen,Finn Erland
A1 - Jakobsen,Anders Clemen
A1 - Brejnholt,Nicolai
A1 - Madsen,Kristin K.
A1 - Hornstrup,Allan
A1 - Westergaard,Niels Jørgen Stenfeldt
A1 - Momberg,Joan
A1 - Koglin,Jason
A1 - Fabricant,Anne M.
A1 - Stern,Marcela
A1 - Craig,William W.
A1 - Pivovaroff,Michael J.
A1 - Windt,David
AU - Christensen,Finn Erland
AU - Jakobsen,Anders Clemen
AU - Brejnholt,Nicolai
AU - Madsen,Kristin K.
AU - Hornstrup,Allan
AU - Westergaard,Niels Jørgen Stenfeldt
AU - Momberg,Joan
AU - Koglin,Jason
AU - Fabricant,Anne M.
AU - Stern,Marcela
AU - Craig,William W.
AU - Pivovaroff,Michael J.
AU - Windt,David
PB - S P I E - International Society for Optical Engineering
PY - 2011
Y1 - 2011
N2 - The NuSTAR mission will be the first mission to carry a hard X-ray(5-80 keV) focusing telescope to orbit. The optics are based on the use of multilayer coated thin slumped glass. Two different material combinations were used for the flight optics, namely W/Si and Pt/C. In this paper we describe the entire coating effort including the final coating design that was used for the two flight optics. We also present data on the performance verification of the coatings both on Si witness samples as well as on individual flight mirrors.
AB - The NuSTAR mission will be the first mission to carry a hard X-ray(5-80 keV) focusing telescope to orbit. The optics are based on the use of multilayer coated thin slumped glass. Two different material combinations were used for the flight optics, namely W/Si and Pt/C. In this paper we describe the entire coating effort including the final coating design that was used for the two flight optics. We also present data on the performance verification of the coatings both on Si witness samples as well as on individual flight mirrors.
KW - Multilayer coatings
KW - NuSTAR
KW - Hard X-ray optics
KW - Calibration
KW - Slumped glass
U2 - 10.1117/12.894615
DO - 10.1117/12.894615
JO - Proceedings of SPIE--the international society for optical engineering
JF - Proceedings of SPIE--the international society for optical engineering
SN - 1605-7422
IS - 1
VL - 8147
SP - 81470U-19
ER -