Analysis of nucleation modelling in ductile cast iron

Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

Standard

Analysis of nucleation modelling in ductile cast iron. / Moumeni, Elham ; Tutum, Cem Celal ; Tiedje, Niels Skat ; Hattel, Jesper Henri.

In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. Vol. V B 3 2012. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

Harvard

Moumeni, E , Tutum, CC , Tiedje, NS & Hattel, JH 2012, 'Analysis of nucleation modelling in ductile cast iron'. in: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. vol. V B 3. IOP Conference Series: Materials Science and Engineering, no. 1, vol. 27

APA

Moumeni, E., Tutum, C. C., Tiedje, N. S., & Hattel, J. H. (2012). Analysis of nucleation modelling in ductile cast iron. In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

CBE

Moumeni E , Tutum CC , Tiedje NS , Hattel JH. 2012. Analysis of nucleation modelling in ductile cast iron. In 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

MLA

Moumeni, Elham et al. "Analysis of nucleation modelling in ductile cast iron". In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. 2012. (IOP Conference Series: Materials Science and Engineering; ???journalNumber??? 1, ???volume??? 27).

Vancouver

Moumeni E , Tutum CC , Tiedje NS , Hattel JH. Analysis of nucleation modelling in ductile cast iron. In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. 2012. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

Author

Moumeni, Elham ; Tutum, Cem Celal ; Tiedje, Niels Skat ; Hattel, Jesper Henri / Analysis of nucleation modelling in ductile cast iron.

In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. Vol. V B 3 2012. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

Bibtex

@inbook{1bb3b26e3d054ab48b31b015f439c8eb,

title = "Analysis of nucleation modelling in ductile cast iron",

author = "Elham Moumeni and Tutum, {Cem Celal} and Tiedje, {Niels Skat} and Hattel, {Jesper Henri}",

year = "2012",

volume = "V B 3",

series = "IOP Conference Series: Materials Science and Engineering",

booktitle = "13rd International conference on advances in solidification process",

}

RIS

TY - GEN

T1 - Analysis of nucleation modelling in ductile cast iron

A1 - Moumeni,Elham

A1 - Tutum,Cem Celal

A1 - Tiedje,Niels Skat

A1 - Hattel,Jesper Henri

AU - Moumeni,Elham

AU - Tutum,Cem Celal

AU - Tiedje,Niels Skat

AU - Hattel,Jesper Henri

PY - 2012

Y1 - 2012

N2 - Heterogeneous nucleation of nodular graphite at inclusions in ductile iron during eutectic solidification has been investigated. The experimental part of this work deals with casting of ductile iron samples with two different inoculants in four different thicknesses. Chemical analysis, metallographic investigation and thermal analysis of the specimens have been carried out. A numerical model [1] has been implemented and the results (i.e. cooling curve, cooling rate, nodule count and solid fraction) have shown a good agreement with experimental studies; following this, inoculation parameters in the model have been studied and discussed.

AB - Heterogeneous nucleation of nodular graphite at inclusions in ductile iron during eutectic solidification has been investigated. The experimental part of this work deals with casting of ductile iron samples with two different inoculants in four different thicknesses. Chemical analysis, metallographic investigation and thermal analysis of the specimens have been carried out. A numerical model [1] has been implemented and the results (i.e. cooling curve, cooling rate, nodule count and solid fraction) have shown a good agreement with experimental studies; following this, inoculation parameters in the model have been studied and discussed.

U2 - 10.1088/1757-899X/27/1/012062

DO - 10.1088/1757-899X/27/1/012062

VL - V B 3

BT - 13rd International conference on advances in solidification process

T2 - 13rd International conference on advances in solidification process

T3 - IOP Conference Series: Materials Science and Engineering

T3 - en_GB

ER -