Standard

Harvard

APA

CBE

MLA

Vancouver

Author

Bibtex

@phdthesis{6ee15e6a88524847bd97190180dae918,
title = "Analysis and modeling of unsteady aerodynamics with application to wind turbine blade vibration at standstill conditions",
publisher = "DTU Wind Energy",
author = "Skrzypinski, {Witold Robert} and Mac Gaunaa",
note = "The study was funded by VEA, Risø DTU and by the project EUDP-DanAero-II, Analysis",
year = "2012",

}

RIS

TY - BOOK

T1 - Analysis and modeling of unsteady aerodynamics with application to wind turbine blade vibration at standstill conditions

A1 - Skrzypinski,Witold Robert

AU - Skrzypinski,Witold Robert

A2 - Gaunaa,Mac

ED - Gaunaa,Mac

PB - DTU Wind Energy

PY - 2012

Y1 - 2012

N2 - Wind turbine blade vibrations at standstill conditions were investigated in the present work. These included vortex-induced and stall-induced vibrations. Thus, it was investigated whether the stand still vibrations are vortex-induced, stall-induced or a combination of both types. The work comprised analyzes based on engineering models and Computational Fluid Dynamics. Twodimensional,<br/>three-degree-of-freedom, elastically-mounted-airfoil engineering models were created. These models aimed at investigating the effect of temporal lag in the aerodynamic response of an airfoil on the<br/>aeroelastic stability limits. The motivation for it was that the standard aerodynamics existing in state-of-the-art aeroelastic codes is effectively quasi-steady in deep stall. If such an assumption was incorrect, these codes could predict stall-induced vibrations inaccurately. The main conclusion drawn from these analyzes was that even a relatively low amount of temporal lag in the aerodynamic response may significantly increase the aerodynamic damping and therefore influence the aeroelastic stability limits, relative to quasisteady aerodynamic response. Two- and three-dimensional CFD<br/>computations included non-moving, prescribed-motion and elasticallymounted airfoil suspensions. 2D and 3D prescribed-motion CFD computations performed on a DU96-W-180 airfoil predicted vortex-induced vibrations at 90 degrees angle of attack at the frequency close to the stationary vortex shedding frequency predicted by 2D CFD computations. Significant discrepancies were observed between 2D and 3D computations around 25 degrees angle of attack. 3D computations predicted occurrence of vortex-induced vibrations while the wind speed necessary for the occurrence of stall-induced vibrations was predicted too high to occur in normal conditions. Analysis of the dynamic lift and drag resulting from 2D and 3D CFD computations carried out around 25 degrees angle of attack showed loops with the slopes of opposite signs indicating that further investigations are needed and that simple models in connection with aeroelastic simulations might not be sufficient to accurately predict vibrations at standstill conditions.

AB - Wind turbine blade vibrations at standstill conditions were investigated in the present work. These included vortex-induced and stall-induced vibrations. Thus, it was investigated whether the stand still vibrations are vortex-induced, stall-induced or a combination of both types. The work comprised analyzes based on engineering models and Computational Fluid Dynamics. Twodimensional,<br/>three-degree-of-freedom, elastically-mounted-airfoil engineering models were created. These models aimed at investigating the effect of temporal lag in the aerodynamic response of an airfoil on the<br/>aeroelastic stability limits. The motivation for it was that the standard aerodynamics existing in state-of-the-art aeroelastic codes is effectively quasi-steady in deep stall. If such an assumption was incorrect, these codes could predict stall-induced vibrations inaccurately. The main conclusion drawn from these analyzes was that even a relatively low amount of temporal lag in the aerodynamic response may significantly increase the aerodynamic damping and therefore influence the aeroelastic stability limits, relative to quasisteady aerodynamic response. Two- and three-dimensional CFD<br/>computations included non-moving, prescribed-motion and elasticallymounted airfoil suspensions. 2D and 3D prescribed-motion CFD computations performed on a DU96-W-180 airfoil predicted vortex-induced vibrations at 90 degrees angle of attack at the frequency close to the stationary vortex shedding frequency predicted by 2D CFD computations. Significant discrepancies were observed between 2D and 3D computations around 25 degrees angle of attack. 3D computations predicted occurrence of vortex-induced vibrations while the wind speed necessary for the occurrence of stall-induced vibrations was predicted too high to occur in normal conditions. Analysis of the dynamic lift and drag resulting from 2D and 3D CFD computations carried out around 25 degrees angle of attack showed loops with the slopes of opposite signs indicating that further investigations are needed and that simple models in connection with aeroelastic simulations might not be sufficient to accurately predict vibrations at standstill conditions.

UR - http://orbit.dtu.dk/en/projects/analysis-and-modeling-of-unsteady-aerodynamics-with-application-to-wind-turbine-blade-vibration-at-standstill-conditions%2805495261-0fa2-47d5-9c4a-3a5d62060dff%29.html

BT - Analysis and modeling of unsteady aerodynamics with application to wind turbine blade vibration at standstill conditions

ER -