Hans Nørgaard Hansen

  1. 2016
  2. Published

    Adaptive Layer Height During DLP Materials Processing. / Pedersen, David Bue; Zhang, Yang; Nielsen, Jakob Skov; Hansen, Hans Nørgaard.

    Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. ed. / Chua Chee Kai; Yeong Wai Yee; Tan Ming Jen; Liu Er Jia. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  3. Published

    A Model of Parallel Kinematics for Machine Calibration. / Pedersen, David Bue; Bæk Nielsen, Morten; Kløve Christensen, Simon; Nielsen, Jakob Skov; Hansen, Hans Nørgaard.

    Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. ed. / C.K. Chua; W.Y. Yeong; M.J. Tan; E.J. Liu. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  4. Published

    An international comparison of surface texture parameters quantification on polymer artefacts using optical instruments. / Tosello, Guido; Haitjema, H.; Leach, R.K.; Quagliotti, Danilo; Gasparin, Stefania; Hansen, Hans Nørgaard.

    In: C I R P Annals, Vol. 65, No. 1, 2016, p. 529-532.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  5. Published

    A Self-Peeling Vat for Improved Release Capabilities During DLP Materials Processing. / Pedersen, David Bue; Zhang, Yang; Nielsen, Jakob Skov; Hansen, Hans Nørgaard.

    Proceedings of the 2nd International Conference on Progress in Additive Manufacturing. ed. / Chua Chee Kai; Yeong Wai Yee; Tan Ming Jen; Liu Er Jia. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  6. Published

    A systematic approach applied in design of a micro heat exchanger. / Omidvarnia, Farzaneh; Hansen, Hans Nørgaard; Sarhadi, Ali.

    In: International Journal of Advanced Manufacturing Technology, Vol. 82, No. 5, 2016, p. 1187-1195.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  7. Published

    Comparison of conventional Injection Mould Inserts to Additively Manufactured Inserts using Life Cycle Assessment. / Hofstätter, Thomas; Bey, Niki; Mischkot, Michael; Lunzer, Andreas ; Pedersen, David Bue; Hansen, Hans Nørgaard.

    Proceedings of euspen’s 16th International Conference & Exhibition. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  8. Published

    Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part. / Quagliotti, Danilo; Salaga, Jacek; Tosello, Guido; Hansen, Hans Nørgaard.

    2016. Poster session presented at euspen’s 16th International Conference & Exhibition, Nottingham, United Kingdom.

    Publication: Research - peer-reviewPoster – Annual report year: 2016

  9. Published

    Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part. / Quagliotti, Danilo; Salaga, Jacek; Tosello, Guido; Hansen, Hans Nørgaard.

    Proceedings of euspen’s 16th International Conference & Exhibition. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  10. Published

    Distribution and Orientation of Carbon Fibers in Polylactic Acid Parts Produced by Fused Deposition Modeling. / Hofstätter, Thomas; W. Gutmann, Ingomar; Koch, Thomas; Pedersen, David Bue; Tosello, Guido; Heinz, Gertraud; Hansen, Hans Nørgaard.

    Proceedings of ASPE Summer Topical Meeting 2016: Dimensional Accuracy and Surface Finish in Additive Manufacturing. ASPE – The American Society for Precision Engineering, 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  11. Published

    Evolution of Surface Texture and Cracks During Injection Molding of Fiber-Reinforced, Additively-Manufactured, Injection Molding Inserts. / Hofstätter, Thomas; Mischkot, Michael; Pedersen, David Bue; Tosello, Guido; Hansen, Hans Nørgaard.

    Proceedings of ASPE Summer Topical Meeting 2016: Dimensional Accuracy and Surface Finish in Additive Manufacturing. ASPE – The American Society for Precision Engineering, 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

Previous 1 2 3 4 5 6 7 8 ...46 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word