Guido Tosello

  1. 2017
  2. Published

    3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation. / Davoudinejad, Ali; Tosello, Guido.

    Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. European Society for Precision Engineering and Nanotechnology, 2017.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2017

  3. Published

    3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation. / Davoudinejad, Ali; Tosello, Guido.

    2017. Poster session presented at 17th euspen International Conference & Exhibition, Hannover, Germany.

    Publication: Research - peer-reviewPoster – Annual report year: 2017

  4. Published

    3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out. / Davoudinejad, Ali; Tosello, Guido; Parenti, Paolo; Annoni, Massimiliano.

    In: Micromachines, Vol. 8, No. 6, 187, 2017.

    Publication: Research - peer-reviewJournal article – Annual report year: 2017

  5. Published

    Applications of Fiber-Reinforced Polymers in Additive Manufacturing. / Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido; Hansen, Hans Nørgaard.

    In: Procedia C I R P, Vol. 66, 2017, p. 312-316.

    Publication: Research - peer-reviewJournal article – Annual report year: 2017

  6. Published

    Experimental approach for the uncertainty assessment of 3D complex geometry dimensional measurements using computed tomography at the mm and sub-mm scales. / Jiménez, Roberto; Torralba, Marta; Yagüe-Fabra, José A.; Ontiveros, Sinué; Tosello, Guido.

    In: Sensors, Vol. 17, No. 5, 1137, 2017.

    Publication: Research - peer-reviewJournal article – Annual report year: 2017

  7. Published

    Finite Element Modeling and Process Performance of Micro End-Milling of Aluminum 6082-T6. / Davoudinejad, Ali; Tosello, Guido; Annoni, Massimiliano.

    Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. European Society for Precision Engineering and Nanotechnology, 2017.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2017

  8. Published
  9. Published

    Investigation of process parameters influence on flash formation in injection moulding of polymer micro features through design of experiments. / Eladl, Abdelkhalik ; Tosello, Guido; Mostafa, Rania ; Soltan, Hassan ; Hansen, Hans Nørgaard.

    2017. Poster session presented at 17th euspen International Conference & Exhibition, Hannover, Germany.

    Publication: Research - peer-reviewPoster – Annual report year: 2017

  10. Published

    Investigation on the micro injection molding process of an overmolded multi-material micro component. / Baruffi, Federico; Calaon, Matteo; Tosello, Guido; Elsborg, R. .

    Proceedings of the 2017 World Congress on Micro and Nano Manufacturing. 2017.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2017

  11. Published

    Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses. / Loaldi, D. ; Calaon, Matteo; Quagliotti, Danilo; Baruffi, Federico; Parenti, P.; Tosello, Guido; Annoni, M.

    2017. Poster session presented at 17th euspen International Conference & Exhibition, Hannover, Germany.

    Publication: Research - peer-reviewPoster – Annual report year: 2017

Previous 1 2 3 4 5 6 7 8 ...21 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word