1. 2014
  2. Published

    An high order Mixed Interpolation Tensorial Components (MITC) shell element approach for modeling the buckling behavior of delaminated composites. / Gaiotti, Marco; Rizzo, Cesare M.; Branner, Kim; Berring, Peter.

    In: Composite Structures, Vol. 108, No. 1, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published

    An overview of the state of the art technologies for multi-MW scale offshore wind turbines and beyond. / Natarajan, Anand.

    In: Wiley Interdisciplinary Reviews : Energy and Environment, Vol. 3, No. 2, 2014, p. 111-121.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  4. Published

    A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades. / Eder, Martin Alexander; Bitsche, Robert; Nielsen, Magda; Branner, Kim.

    In: Wind Energy, Vol. 17, No. 3, 2014, p. 483-497.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  5. Published

    Årsrapport for Energistyrelsens Godkendelsessekretariat for vindmøller 2012 - 2013. / Friis, Peggy; Daub, Pernille.

    Danmarks Tekniske Universitet (DTU), 2014. 70 p. (DTU Wind Energy E; No. 0048(DK)).

    Publication: CommunicationReport – Annual report year: 2014

  6. Published

    Bend-twist coupling potential of wind turbine blades. / Fedorov, Vladimir; Berggreen, Christian.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012035, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  7. Published

    DeepWind. From idea to 5 MW concept. / Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: Research - peer-reviewSound/Visual production (digital) – Annual report year: 2014

  8. Published

    Extreme Design Loads Calibration of Offshore Wind Turbine Blades through Real Time Measurements. / Natarajan, Anand; Vesth, Allan; Lamata, Rebeca Rivera.

    Proceedings of EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  9. Published

    Extreme Design Loads Calibration of Offshore Wind Turbine Blades through Real Time Measurements. / Natarajan, Anand; Vesth, Allan; Lamata, Rebeca Rivera.

    2014. Poster session presented at European Wind Energy Conference & Exhibition 2014, Barcelona, Spain.

    Publication: Research - peer-reviewPoster – Annual report year: 2014

  10. E-pub ahead of print

    Fracture analysis of adhesive joints in wind turbine blades. / Eder, Martin Alexander; Bitsche, Robert.

    In: Wind Energy, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  11. Published

    Full-scale test of trailing edge flaps on a Vestas V27 wind turbine: active load reduction and system identification. / Castaignet, Damien ; Barlas, Thanasis K.; Buhl, Thomas; Poulsen, Niels Kjølstad; Wedel-Heinen, Jens Jakob ; Olesen, Niels A.; Bak, Christian; Kim, Taeseong.

    In: Wind Energy, Vol. 17, No. 4, 2014, p. 549–564.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  12. Published

    Growth limit of carbon onions – A continuum mechanical study. / Todt, Melanie; Bitsche, Robert; Hartmann, Markus A.; Fischer, Franz D.; Rammerstorfer, Franz G. .

    In: International Journal of Solids and Structures, Vol. 51, No. 3-4, 2014, p. 706-715.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  13. Published

    Influence of second-order random wave kinematics on the design loads of offshore wind turbine support structures. / Natarajan, Anand.

    In: Renewable Energy, Vol. 68, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published

    Influence of the control system on wind turbine reliability in extreme turbulence. / Abdallah, Imad; Natarajan, Anand; Sørensen, J. D.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012069, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  15. Published

    INNWIND.EU. Overview of project and recent results. / Jensen, Peter Hjuler (Author); Natarajan, Anand (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: Research - peer-reviewSound/Visual production (digital) – Annual report year: 2014

  16. Published

    Jacket substructure fatigue mitigation through active control. / Hanis, Tomas; Natarajan, Anand.

    Department of Wind Energy Annual Report 2013. ed. / Berit C. Larsen; Jens Carsten Hansen; Tom Cronin. DTU Wind Energy, 2014. p. 21.

    Publication: CommunicationReport chapter – Annual report year: 2014

  17. Published

    Key Performance Indicators and Target Values for Multi-Megawatt Offshore Turbines. / Chaviaropoulos, Panagiotis K. ; Natarajan, Anand; Jensen, Peter Hjuler.

    Proceedings of EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  18. Published

    Key Performance Indicators and Target Values for Multi-Megawatt Offshore Turbines. / Chaviaropoulos, Panagiotis K. (Author); Natarajan, Anand (Author); Jensen, Peter Hjuler (Author).

    2014. European Wind Energy Association (EWEA).European Wind Energy Conference & Exhibition 2014, Barcelona, Spain, 10/03/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  19. Published

    Measurement of local relative displacements in large structures. / Tesauro, Angelo; Eder, Martin Alexander; Nielsen, Magda.

    In: Journal of Strain Analysis for Engineering Design, Vol. 49, No. 5, 2014, p. 301-314.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. E-pub ahead of print
  21. Published

    Multi-material topology optimization of laminated composite beams with eigenfrequency constraints. / Blasques, José Pedro Albergaria Amaral.

    In: Composite Structures, Vol. 111, 2014, p. 45-55.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  22. Published
  23. Published

    Quick Method for Aeroelastic and Finite Element Modeling of Wind Turbine Blades. / Bennett, Jeffrey ; Bitsche, Robert; Branner, Kim; Kim, Taeseong.

    Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. GT2014-26155.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  24. Published
  25. Published

    Technical certification scheme for design, manufacture, installation, maintenance and service of wind turbines. / Friis, Peggy.

    Department of Wind Energy Annual Report 2013. ed. / Berit C. Larsen; Jens Carsten Hansen; Tom Cronin. DTU Wind Energy, 2014. p. 24.

    Publication: CommunicationReport chapter – Annual report year: 2014

  26. Published

    The 5 MW DeepWind floating offshore vertical wind turbine concept design - status and perspective. / Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Kragh, Knud Abildgaard; Nielsen, Per Hørlyk; Baran, Ismet; Ritchie, E.; Leban, K.M.; Svendsen, H.; Berthelsen, P.A.; Bussel, G.J.W.van ; Ferreira, C.S.; Chrysochoidis-Antsos, N.

    Proceedings - EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  27. E-pub ahead of print

    Truss topology optimization with discrete design variables by outer approximation. / Stolpe, Mathias.

    In: Journal of Global Optimization, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  28. Published

    Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results. / Luczak, Marcin; Manzato, Simone; Peeters, Bart; Branner, Kim; Berring, Peter; Kahsin, Maciej.

    In: Shock and Vibration, Vol. 2014, 684786, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. 2013
  30. Published

    A 3D ductile constitutive mixed-mode model of cohesive elements for the finite element analysis of adhesive joints. / Anyfantis, Konstantinos; Tsouvalis, Nicholas G.

    In: Journal of Adhesion Science and Technology, Vol. 27, No. 10, 2013, p. 1146-1178.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  31. Published

    Adaptive Trailing Edge Flaps for Active Load Alleviation in a Smart Rotor Configuration. / Bergami, Leonardo; Gaunaa, Mac (Main supervisor); Poulsen, Niels Kjølstad (Supervisor); Buhl, Thomas (Supervisor).

    DTU Wind Energy, 2013. 308 p. (DTU Wind Energy PhD; No. 0020(EN)).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  32. Published

    Analysis of an adhesively bonded single lap joint subjected to eccentric loading. / Anyfantis, Konstantinos; Tsouvalis, N. G.

    In: International Journal of Adhesion and Adhesives, Vol. 41, 2013, p. 41-49.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  33. Published

    Applications of the BEam Cross section Analysis Software (BECAS). / Blasques, José Pedro Albergaria Amaral; Bitsche, Robert; Fedorov, Vladimir; Eder, Martin Alexander.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.-A. Mardal; A. Massing. Center for Biomedical Computing, Simula Research Laboratory, 2013. p. 46-49.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  34. Published

    Calibration of a finite element composite delamination model by experiments. / Gaiotti, M.; Rizzo, C.M.; Branner, Kim; Berring, Peter.

    Analysis and Design of Marine Structures - Proceedings of the 4th International Conference on Marine Structures, MARSTRUCT 2013. ed. / C. Guedes Soares; J. Romanoff. Taylor & Francis, 2013. p. 389-396.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  35. Published

    Comparison of coupled and uncoupled load simulations on a jacket support structure. / Haselbach, Philipp Ulrich; Natarajan, Anand; Jiwinangun, Randi Gusto; Branner, Kim.

    In: Energy Procedia, Vol. 35, 2013, p. 244 – 252.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  36. Published

    Concept Testing of a Simple Floating Offshore Vertical Axis Wind Turbine. / Friis Pedersen, Troels (Author); Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Enevoldsen, Karen (Author); Tesauro, Angelo (Author); Kragh, Knud Abildgaard (Author); Vita, Luca (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Wedell-Heinen, Jacob (Author); Helbo Larsen, Karsten (Author).

    2013. European Wind Energy Association (EWEA).European Wind Energy Conference & Exhibition 2013, Vienna, Austria, 04/02/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  37. Published

    Concept Testing of a Simple Floating Offshore Vertical Axis Wind Turbine. / Friis Pedersen, Troels; Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Nielsen, Per Hørlyk; Enevoldsen, Karen; Tesauro, Angelo; Kragh, Knud Abildgaard; Vita, Luca; Ritchie, Ewen ; Leban, Krisztina ; Wedell-Heinen, Jacob ; Helbo Larsen, Karsten .

    Proceedings of EWEA 2013. European Wind Energy Association (EWEA), 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  38. Published

    Design and Aero-elastic Simulation of a 5MW Floating Vertical Axis Wind Turbine. / Vita, Luca; Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Nielsen, Per Hørlyk; Berthelsen, Petter A.; Cartsensen, Stefan .

    Proceedings of the ASME 2012 International Conference on Ocean, Offshore and Arctic Engineering. Vol. 7 American Society of Mechanical Engineers, 2013. p. 383-392 OMAE2012-83470.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  39. Published

    Design Loads Prediction on Fixed Offshore Support Structures. / Natarajan, Anand (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  40. Published
  41. Published
  42. Published

    Development of an anisotropic beam finite element for composite wind turbine blades in multibody system. / Kim, Taeseong; Hansen, Anders Melchior; Branner, Kim.

    In: Renewable Energy, Vol. 59, 2013, p. 172-183.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  43. Published

    Effect of Coupled Non linear Wave Kinematics and Soil Flexibility on the Design Loads of Offshore Wind Turbines. / Kim, Taeseong; Natarajan, Anand.

    Proceedings of 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics & Astronautics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  44. Published

    Electromechanical Drivetrain Simulation. / Gallego-Calderon, Juan; Branner, Kim; Natarajan, Anand; Cutululis, Nicolaos Antonio; Hansen, Jens Carsten.

    Proceedings of 9th PhD Seminar on Wind Energy in Europe. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  45. Published

    Estimating Wind and Wave Induced Forces On a Floating Wind Turbine. / Henriksen, Lars Christian; Natarajan, Anand; Kim, Taeseong.

    2013. Poster session presented at European Wind Energy Conference & Exhibition 2013, Vienna, Austria.

    Publication: Research - peer-reviewPoster – Annual report year: 2013

  46. Published

    Estimating Wind and Wave Induced Forces On a Floating Wind Turbine. / Henriksen, Lars Christian; Natarajan, Anand; Kim, Taeseong.

    Proceedings of EWEA 2013. European Wind Energy Association (EWEA), 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  47. Published

    Feasibility study of a semi floating spar buoy wind turbine anchored with a spherical joint to the sea floor. / Sanz Martinez, Maria; Natarajan, Anand; Henriksen, Lars Christian.

    Conference proceedings - EWEA Offshore 2013. European Wind Energy Association (EWEA), 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  48. Published

    Frequency-Weighted Model Predictive Control of Trailing Edge Flaps on a Wind Turbine Blade. / Castaignet, Damien; Couchman, Ian; Poulsen, Niels Kjølstad; Buhl, Thomas; Wedel-Heinen, Jens Jakob.

    In: I E E E Transactions on Control Systems Technology, Vol. 21, No. 4, 2013, p. 1105-1116.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  49. Published

    Hybrid Testing of Composite Structures with Single-Axis Control. / Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 19th International Conference on Composite Materials. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  50. Published

    Introduction to wind turbine blade design. / Mølholt Jensen, F. ; Branner, Kim.

    Advances in wind turbine blade design and materials. ed. / Povl Brøndsted; Rogier Nijssen. Woodhead Publishing, 2013. (Woodhead Publishing Series in Energy; No. 47).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  51. E-pub ahead of print
  52. Published

    Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents – Part I: Experiments. / Anyfantis, Konstantinos; Tsouvalis, Nicholas G.

    In: Composite Structures, Vol. 96, 2013, p. 850-857.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  53. Published

    Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents – Part II: Numerical simulation. / Anyfantis, Konstantinos; Tsouvalis, Nicholas G.

    In: Composite Structures, Vol. 96, 2013, p. 858-868.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  54. Published

    Mean load effects on the fatigue life of offshore wind turbine monopile foundations. / Blasques, José Pedro Albergaria Amaral; Natarajan, Anand.

    Computational Methods in Marine Engineering V - Proceedings of the 5th International Conference on Computational Methods in Marine Engineering, MARINE 2013. ed. / B. Brinkmann; P. Wriggers. International Center for Numerical Methods in Engineering (CIMNE), 2013. p. 818-829.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  55. Published

    Models and Methods for Structural Topology Optimization with Discrete Design Variables. / Stolpe, Mathias.

    DTU Wind Energy, 2013. 365 p.

    Publication: ResearchDoctoral thesis – Annual report year: 2013

  56. Published

    Offshore Wind Turbine Foundation Model Validation with Wind Farm Measurements and Uncertainty Quantification. / Koukoura, Christina; Natarajan, Anand; Krogh, Thomas; Kristensen, Ole Jesper.

    In: International Offshore and Polar Engineering Conference. Proceedings, 2013, p. 119-125.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  57. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos; Stolpe, Mathias.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  58. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos (Author); Stolpe, Mathias (Author); Lund, Erik (Author); Sørensen, René (Author).

    2013. 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States, 19/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  59. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos (Author); Stolpe, Mathias (Author); Lund, Erik (Author); Sørensen, René (Author).

    2013. DCAMM 14th internal Symposium, Nyborg, Denmark, 13/03/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  60. Published

    Predicting extreme loads effects on wind turbines considering uncertainty in airfoil data. / Abdallah, Imad; Natarajan, Anand; Sørensen, John Dalsgaard.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 215-222.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  61. Published
  62. Published

    Reliability assessment of fatigue critical welded details in wind turbine jacket support structures. / Branner, Kim; Stensgaard Toft, Henrik; Haselbach, Philipp Ulrich; Natarajan, Anand; Sørensen, John Dalsgaard.

    Proceedings of the ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Vol. 2 American Society of Mechanical Engineers, 2013. OMAE2013-11398.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  63. Published

    Static strain and deformation controlled testing of composite beams. / Høgh, Jacob Herold; Waldbjørn, Jacob Paamand; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 6th International Conference on Composites Testing and Model Identification. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  64. Published

    Structural Reliability of Wind Turbine Blades : Design Methods and Evaluation. / Dimitrov, Nikolay Krasimirov; Staerdahl, Jesper (Supervisor); Friis-Hansen, Peter (Supervisor); Berggreen, Christian (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 214 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  65. Published
  66. E-pub ahead of print
  67. Published

    Uncertainty modelling and code calibration for composite materials. / Toft, Henrik Stensgaard; Branner, Kim; Mishnaevsky, Leon, Jr; Sørensen, John Dalsgaard.

    In: Journal of Composite Materials, Vol. 47, No. 14, 2013, p. 1729-1747.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  68. 2012
  69. Published

    A Greedy Algorithm for a Special Class of Geometric Set Covering Problems. / Stolpe, Mathias; Bechmann, Andreas.

    DTU Wind Energy, 2012. 9 p. (DTU Wind Energy E; No. 0013(EN)).

    Publication: ResearchReport – Annual report year: 2012

  70. Published
  71. Published

    Årsrapport for Energistyrelsens Godkendelsessekretariat for vindmøller 2011. / Friis, Peggy; Lemming, Jørgen Kjærgaard.

    DTU Wind Energy, 2012. 70 p. (DTU Wind Energy E; No. 0018(DK)).

    Publication: ResearchReport – Annual report year: 2012

  72. Published
  73. Published

    Design and test of box girder for a large wind turbine blade. / Nielsen, Per Hørlyk; Tesauro, Angelo; Bitsche, Robert; McGugan, Malcolm; Lynnov, Christian ; Sørensen, Flemming; Knudsen, Henrik; Berring, Peter; Branner, Kim; Lagerbon, Mikkel; Andreasen, Peter ; Lukassen, Troels .

    DTU Wind Energy, 2012. 221 p. (DTU Wind Energy E; No. 0010(EN)).

    Publication: ResearchReport – Annual report year: 2013

  74. Published

    Experimental Determination and Numerical Modelling of Process Induced Strains and Residual Stresses in Thick Glass/Epoxy Laminate. / Nielsen, Michael Wenani; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Branner, Kim; Nielsen, Per Hørlyk.

    ECCM15 - 15th European Conference On Composite Materials. 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  75. Published

    Light Rotor: The 10-MW reference wind turbine. / Bak, Christian; Bitsche, Robert; Yde, Anders; Kim, Taeseong; Hansen, Morten Hartvig; Zahle, Frederik; Gaunaa, Mac; Blasques, José Pedro Albergaria Amaral; Døssing, Mads; Wedel Heinen, Jens-Jakob ; Behrens, Tim .

    Proceedings of EWEA 2012 - European Wind Energy Conference & Exhibition. European Wind Energy Association (EWEA), 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  76. Published

    Multi-material topology optimization of laminated composite beam cross sections. / Blasques, José Pedro Albergaria Amaral; Stolpe, Mathias.

    In: Composite Structures, Vol. 94, 2012, p. 3278-3289.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  77. Published

    Optimizing Reliability using BECAS - an Open-Source Cross Section Analysis Tool. / Bitsche, Robert (Author); Blasques, José Pedro Albergaria Amaral (Author).

    2012. DTU Wind Power Day 2012, 11/06/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  78. Published

    Reliability-based calibration of fatigue safety factors for offshore wind turbines. / Sørensen, John Dalsgaard.

    In: International Journal of Offshore and Polar Engineering, Vol. 22, No. 3, 2012, p. 234-241.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  79. Published

    Risk assessment of wind turbines close to highways. / Sørensen, John Dalsgaard; Sørensen, Jens Nørkær; Lemming, Jørgen Kjærgaard.

    Proceedings of EWEA 2012 - European Wind Energy Conference & Exhibition. European Wind Energy Association (EWEA), 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  80. Published

    User’s Manual for BECAS : A cross section analysis tool for anisotropic and inhomogeneous beam sections of arbitrary geometry. / Blasques, José Pedro Albergaria Amaral.

    Risø DTU – National Laboratory for Sustainable Energy, 2012. (Denmark. Forskningscenter Risoe. Risoe-R; No. 1785(EN)).

    Publication: ResearchReport – Annual report year: 2012

  81. 2011
  82. Published

    Model predictive control of trailing edge flaps on a wind turbine blade. / Castaignet, Damien Bruno; Buhl, Thomas (Supervisor); Poulsen, Niels Kjølstad (Supervisor); Wedel-Heinen, Jens Jakob (Supervisor).

    Technical University of Denmark. Risø National Laboratory for Sustainable Energy, 2011. 133 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  83. Published

    TOPFARM - next generation design tool for optimisation of wind farm topology and operation. / Larsen, Gunner Chr.; Aagaard Madsen , Helge; Troldborg, Niels; Larsen, Torben J.; Réthoré, Pierre-Elouan; Fuglsang, Peter; Ott, Søren; Mann, Jakob; Buhl, Thomas; Nielsen, Morten; Markou, Helen; Sørensen, Jens Nørkær; Hansen, Kurt Schaldemose; Mikkelsen, Robert Flemming; Okulov, Valery; Shen, Wen Zhong; Heath, Malcolm; King, John; McCann, Graeme; Schlez, Wolfgang; Carlén, Ingemar; Ganander, Hans; Migoya, Emilio; Crespo, Antonio; Jiménez, Angel; Prieto, J.L.; Stidworthy, Amy; Carruthers, Davis; Hunt, Julian; Gray, Stephanie; Veldkamp, Dick; Mouritzen, Anders S.; Jensen, Leo; Krogh, Thomas; Schmidt, Björn; Argyriadis, Kimon; Frohböse, Peter.

    Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi, 2011. 95 p. (Denmark. Forskningscenter Risoe. Risoe-R; No. 1805(EN)).

    Publication: ResearchReport – Annual report year: 2012

Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word