1. 2015
  2. Published

    Directional bending wave propagation in periodically perforated plates. / Andreassen, Erik; Manktelow, Kevin ; Ruzzene, Massimo .

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 187–203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  3. Published

    Optimization of nonlinear structural resonance using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    In: Journal of Sound and Vibration, Vol. 334, 2015, p. 239–254.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  4. Published

    Vibration suppression for strings with distributed loading using spatial cross-section modulation. / Sorokin, Vladislav; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 66–77.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  5. 2014
  6. Published

    Advanced Topology Optimization Methods for Conceptual Architectural Design. / Aage, Niels; Amir, Oded; Clausen, Anders; Hadar, Lior ; Maier, Dana ; Søndergaard, Asbjørn .

    Advances in Architectural Geometry 2014. ed. / P. Block; J. Knippers; N.J. Mitra; W. Wang. Springer, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  7. Published

    Analysis of enhanced modal damping ratio in porous materials using an acoustic-structure interaction model. / Kook, Junghwan; Jensen, Jakob Søndergaard.

    In: A I P Advances, Vol. 4, No. 12, 2014, p. 124304.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  8. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  9. Published
  10. Published

    Analytical sensitivity analysis and topology optimization of nonlinear resonant structures with hardening and softening behavior. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Abstract from 17th U.S. National Congress on Theoretical and Applied Mechanics, East Lansing, Michigan, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  11. Published
  12. Published
  13. Published

    A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. / Ashouri Vajari, Danial; González, Carlos; Llorca, Javier; Legarth, Brian Nyvang.

    In: Composites Science and Technology, Vol. 97, 2014, p. 46-54.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published
  15. Published
  16. Published

    Application of finite elements and computational fluid dynamics to predict and improve the filling ratio in journal bearings under dynamic loading. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. 2014. (TRITA-MEK Technical report; No. 2014:24).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  17. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    Bend-twist coupling potential of wind turbine blades. / Fedorov, Vladimir; Berggreen, Christian.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012035, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  19. Published

    Bifurcation analysis of a smoothed model of a forced impacting beam and comparison with an experiment. / Elmegård, Michael; Krauskopf, B.; Osinga, H.M.; Starke, Jens; Thomsen, Jon Juel.

    In: Nonlinear Dynamics, Vol. 77, 2014, p. 951–966.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. Published

    Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids. / Tvergaard, Viggo.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 112-122.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  21. Published

    Cavitation analysis of a journal bearing - Finite Element modelling and experimental studies. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. ed. / Lars Pleth Nielsen; Ion Marius Sivebæk; Svend Stensig Eskildsen; Sascha Louring; Lone Elly Larsen. Danish Technological Institute, 2014. p. 81.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  22. Published

    Characterizing and Modeling Brittle Bi-material Interfaces Subjected to Shear. / Anyfantis, Konstantinos; Berggreen, Christian.

    In: Applied Composite Materials, Vol. 21, 2014, p. 905–919.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  23. Submitted

    Combined Shape and Topology Optimization. / Christiansen, Asger Nyman; Bærentzen, Jakob Andreas (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby : Technical University of Denmark (DTU), 2014. 131 p. (DTU Compute PHD-2014; No. 350).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  24. Published

    Combined shape and topology optimization for minimization of von Mises Stress. / Christiansen, Asger Nyman; Tortorelli, Daniel A.; Aage, Niels; Sigmund, Ole.

    2014. Abstract from 4th International Conference on Engineering Optimization, Lisbon, Portugal.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  25. In press
  26. Published

    Comparing the Gauss-Seidel and Jacobi Relaxation Schemes in the Solution of the EHL Line Contact Problem Using a Multigrid solver. / Janakiraman, Shravan; Klit, Peder.

    2014. Paper presented at 16th Nordic Symposium on Tribology, Aarhus, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  27. Published
  28. Published

    Comparison of Four Numerical Methods of EHL Modeling. / Janakiraman, Shravan; Klit, Peder.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014. p. 83.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  29. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  30. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  31. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  32. Published

    CONTINEX: A Toolbox for Continuation in Experiments. / Schilder, Frank; Bureau, Emil; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Technische Universität Wien, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  33. Published
  34. Published

    Damping of Offshore Wind Turbine Tower Vibrations by a Stroke Amplifying Brace. / Brodersen, Mark Laier; Høgsberg, Jan Becker.

    In: Energy Procedia, Vol. 53, 2014, p. 258-267.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  35. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  36. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    Design of material anisotropy constitutive matrices for structural stiffness and strength optimization. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Engineering Optimization IV. ed. / H.C. Rodrigues. C R C Press LLC, 2014. p. 169-173.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  38. Published

    Design of materials with prescribed nonlinear properties. / Wang, Fengwen; Sigmund, Ole; Jensen, Jakob Søndergaard.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 156-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  39. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  40. E-pub ahead of print
  41. Published
  42. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  43. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  44. E-pub ahead of print
  45. E-pub ahead of print

    Experimental and theoretical analysis of a rigid rotor supported by air foil bearings. / Larsen, Jon Steffen; Hansen, Asger J. T. ; Santos, Ilmar.

    In: Mechanics & Industry, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  46. Published
  47. Published

    Experimental Bifurcation Analysis Using Control-Based Continuation. / Bureau, Emil; Santos, Ilmar (Main supervisor); Thomsen, Jon Juel (Supervisor); Starke, Jens.

    DTU Mechanical Engineering, 2014. 145 p. (DCAMM Special Report; No. S163).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  48. Published

    Experimental Grey Box Model Identification of an Active Gas Bearing. / Theisen, Lukas Roy Svane; Pierart Vásquez, Fabián Gonzalo; Niemann, Hans Henrik; Santos, Ilmar; Blanke, Mogens.

    Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014. ed. / Jyoti K. Sinha. Springer, 2014. p. 963-976 (Mechanisms and Machine Science, Vol. 23).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  49. Published

    Experiments in nonlinear dynamics using control-based continuation: Tracking stable and unstable response curves. / Bureau, Emil; Schilder, Frank; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Technische Universität Wien, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  50. Published

    Explicit free‐floating beam element. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 98, No. 1, 2014, p. 59-78.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  51. Published
  52. Published

    Extended neural network-based scheme for real-time force tracking with magnetorheological dampers. / Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker.

    In: Structural Control and Health Monitoring, Vol. 21, No. 2, 2014, p. 225–247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  53. Published

    Face/core mixed mode debond fracture toughness characterization using the modified TSD test method. / Berggreen, Christian; Quispitupa, Amilcar; Costache, Andrei; Carlsson, Leif A.

    In: Journal of Composite Materials, Vol. 48, No. 16, 2014, p. 1939-1945.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  54. Published

    Feedback-Controlled Lubrication for Reducing the Lateral Vibration of Flexible Rotors supported by Tilting-Pad Journal Bearings. / Salazar, Jorge Andrés González; Santos, Ilmar.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  55. Published
  56. Published

    General beam cross-section analysis using a 3D finite element slice. / Couturier, Philippe; Krenk, Steen.

    Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE2014). American Society of Mechanical Engineers, 2014. IMECE2014-36721.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  57. Published

    Global Format for Conservative Time Integration in Nonlinear Dynamics. / Krenk, Steen.

    Proceedings of 9th European Conference on Structural Dynamics, EURODYN 2014. ed. / A. Cunha; E. Caetano; P. Ribeiro; G. Müller. European Association for Structural Dynamics, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  58. Published

    Global format for energy-momentum based time integration in nonlinear dynamics. / Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 100, No. 6, 2014, p. 458-476.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  59. Published

    How to determine composite material properties using numerical homogenization. / Andreassen, Erik; Andreasen, Casper Schousboe.

    In: Computational Materials Science, Vol. 83, 2014, p. 488-495.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  60. Published
  61. Published
  62. Published

    Jumps and bi-stability in the phase-gain characteristics of a nonlinear parametric amplifier. / Neumeyer, Stefan; van de Looij, Ruud ; Thomsen, Jon Juel.

    ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference. ed. / Horst Ecker; Alois Steindl; Stefan Jakubek. Vienna University of Technology, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  63. Published

    Laboratory Simulation of Rolling Contact Fatigue Cracks in Wind Turbine Bearings Using Hydrogen Infused 100Cr6 Bearing Steel. / Janakiraman, Shravan; West, Ole; Klit, Peder; Jensen, Niels Steenfeldt.

    2014. Paper presented at 16th Nordic Symposium on Tribology, Aarhus, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  64. Published

    Machine Elements : Analysis and Design. / Klit, Peder; Pedersen, Niels Leergaard.

    2 ed. Kgs. Lyngby, Denmark : Polyteknisk Boghandel og Forlag, 2014. 298 p.

    Publication: EducationBook – Annual report year: 2014

  65. Published
  66. E-pub ahead of print
  67. E-pub ahead of print
  68. Published

    Nonlinear dynamics of a pseudoelastic shape memory alloy system - theory and experiment. / Enemark, Søren; A Savi, M.; Santos, Ilmar.

    In: Smart Materials and Structures, Vol. 23, No. 8, 085018, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  69. Published

    Numerical and experimental investigation of bump foil mechanical behaviour. / Larsen, Jon Steffen; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Tribology International, Vol. 74, 2014, p. 46–56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  70. Published

    Numerical simulation of cropping. / Tvergaard, Viggo; Hutchinson, John W.

    In: Journal of Applied Mechanics, Vol. 81, No. 7, 071002, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  71. Published

    Observations on the effects of grooved surfaces on the interfacial torque in highly loaded rolling and sliding tests. / Janakiraman, Shravan; Klit, Peder; Jensen, Niels Steenfeldt; Grønbæk, Jens.

    In: Tribology International, Vol. 81, 2014, p. 179–189.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  72. Published

    On gear tooth stiffness evaluation. / Pedersen, Niels Leergaard; Jørgensen, Martin Felix.

    In: Computers & Structures, Vol. 135, 2014, p. 109-117.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  73. Published

    On helical gear stiffness evaluation. / Pedersen, Niels Leergaard.

    Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. 2014. p. 236-239 (TRITA-MEK Technical report; No. 2014:24).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  74. Published

    On multigrid-CG for efficient topology optimization. / Amir, Oded; Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, Vol. 49, 2014, p. 815–829.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  75. Published

    On optimization of internal/external spur gears tooth bending strength. / Pedersen, Niels Leergaard.

    Engineering Optimization IV. ed. / H.C. Rodrigues. C R C Press LLC, 2014. p. 217-218.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  76. Published

    On the consistency of adjoint sensitivity analysis for structural optimization of linear dynamic problems. / Jensen, Jakob Søndergaard; Nakshatrala, Praveen B.; Tortorelli, Daniel A.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 5, 2014, p. 831-837.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  77. Published

    On the failure analysis of bondlines: Stress or energy based fracture criteria?. / Anyfantis, Konstantinos.

    In: Engineering Fracture Mechanics, Vol. 126, 2014, p. 108-125.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  78. Published

    On the homogenization of metal matrix composites using strain gradient plasticity. / Azizi, Reza; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: Acta Mechanica Sinica, Vol. 30, No. 2, 2014, p. 175-190.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  79. Published
  80. Published

    On the response of a nonlinear parametric amplifier driven beyond resonance. / Sorokin, Vladislav.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  81. Published

    On the unlimited gain of a nonlinear parametric amplifier. / Sorokin, Vladislav.

    In: Mechanics Research Communications, Vol. 62, 2014, p. 111–116.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  82. Published

    Optical role of randomness for structured surfaces. / Johansen, Villads Egede.

    In: Applied Optics, Vol. 53, No. 11, 2014, p. 2405-2415.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  83. Published

    Optimal design of hardening and softening resonances of plane frame structures : Extended abstract. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Paper presented at 8th European Nonlinear Dynamics Conference, Vienna, Austria.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  84. Published

    Optimality criteria for the components of anisotropic constitutive matrix. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 50, 2014, p. 181-191.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  85. Published

    Optimized surface textures for hydrodynamic bearings. / Andreasen, Casper Schousboe.

    27th Nordic Seminar on Computational Mechanics (NSCM-27). ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. Kungl. Tekniska högskolan I Stockholm, 2014. p. 244-247.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  86. Published

    Reliability based topology optimization for continuum structures with local failure constraints. / Luo, Yangjun; Zhou, Mingdong; Wang, Michael Yu; Deng, Zichen.

    In: Computers and Structures, Vol. 143, 2014, p. 73-84.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  87. Published
  88. Published

    Rolling Contact Fatigue Of Hydrogen Infused Bearing Surfaces Under An Applied Hoop Stress And EHL Conditions. / Janakiraman, Shravan; West, Ole; Klit, Peder; Jensen, Niels Steenfeldt.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014. p. 16.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  89. Published
  90. Published

    Strain gradient effects in periodic flat punch indenting at small scales. / Nielsen, Kim Lau; Niordson, Christian Frithiof; Hutchinson, J. W.

    In: International Journal of Solids and Structures, Vol. 51, No. 21-22, 2014, p. 3549-3556.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  91. Published

    Structural optimization of wind turbine rotor blades by multilevel sectional/multibody/3D-FEM analysis. / Bottasso, C. L.; Campagnolo, F.; Croce, A.; Dilli, S.; Gualdoni, F.; Nielsen, Martin Bjerre.

    In: Multibody System Dynamics, Vol. 32, No. 1, 2014, p. 87-116.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  92. Published

    Sub-surface Fatigue Crack Growth at Alumina Inclusions in AISI 52100 Roller Bearings. / Cerullo, Michele.

    In: Procedia Engineering, Vol. 74, 2014, p. 333-338.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  93. Published

    Suppression of vibration in bounded structures subjected to action of a distributed load by continuous spatial modulations of their parameters. / Sorokin, Vladislav.

    Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  94. Published

    Theoretical and experimental investigation of cavitation in main bearings for large two-stroke marine diesel engines. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    2014. Abstract from 10th European Fluid Mechanics Conference (EUROMECH), KGs. Lyngby, Denmark.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  95. Published

    Tilting-Pad Journal Bearings with Active Lubrication Applied as Calibrated Shakers: Theory and Experiment. / Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Journal of Vibration and Acoustics, Vol. 136, No. 6, 061010, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  96. Published
  97. Published

    Topology optimisation of natural convection problems. / Alexandersen, Joe; Aage, Niels; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: International Journal for Numerical Methods in Fluids, Vol. 76, No. 10, 2014, p. 699-721.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  98. Published

    Topology optimised design of robust material microstructures without length scale separation. / Alexandersen, Joe; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2014. Abstract from International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  99. Published

    Topology optimization for optical projection lithography with manufacturing uncertainties. / Zhou, Mingdong; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Applied Optics, Vol. 53, No. 12, 2014, p. 2720-2729.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  100. Published

    Topology optimization of fail-safe structures using a simplified local damage model. / Jansen, Miche; Lombaert, Geert; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 4, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  101. Published

    Topology Optimization of Flow Machinery. / Andreasen, Casper Schousboe; Aage, Niels; Madsen, Thomas B.S. .

    Proceedings of 1st International Conference on Engineering and Applied Sciences Optimization. ed. / M. G Karlaftis; N. D. Lagaros; M. Papadrakakis. National Technical University of Athens, 2014. p. 1964.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  102. Published

    Topology optimization of metallic waveguide filters. / Aage, Niels; Johansen, Villads Egede; Sørensen, Peter Jagd; Zhurbenko, Vitaliy.

    2014. Abstract from International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  103. Published
  104. Published
  105. Published

    Topology Optimization Using Multiscale Finite Element Method for High-Contrast Media. / Lazarov, Boyan Stefanov.

    In: Lecture Notes in Computer Science, Vol. 8353, 2014, p. 339–346.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  106. E-pub ahead of print
  107. E-pub ahead of print

    Topology optimization with flexible void area. / Clausen, Anders; Aage, Niels; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  108. Published

    Topology-optimized broadband surface relief transmission grating. / Andkjær, Jacob; Ryder, Christian P.; Nielsen, Peter C.; Rasmussen, Thomas; Buchwald, Kristian; Sigmund, Ole.

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8980, 898006, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  109. Published
  110. Published

    Tuned mass absorber on a flexible structure. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Sound and Vibration, Vol. 333, No. 6, 2014, p. 1577-1595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  111. Published
  112. Published

    Wind energy technology developments. / Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard.

    DTU International Energy Report 2014: Wind energy — drivers and barriers for higher shares of wind in the global power generation mix. ed. / Hans Hvidtfeldt Larsen; Leif Sønderberg Petersen. Technical University of Denmark, 2014. p. 32-42.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  113. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 2: Application examples. / Schlechtingen, Meik; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 14, 2014, p. 447-460.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  114. 2013
  115. Published

    A 2D finite element implementation of the Fleck–Willis strain-gradient flow theory. / Nielsen, Kim Lau; Niordson, Christian Frithiof.

    In: European Journal of Mechanics A - Solids, Vol. 41, 2013, p. 134-142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  116. Published

    Acoustical topology optimization of Zwicker's loudness with Padé approximation. / Kook, Junghwan; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 255, 2013, p. 40-66.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  117. Published

    Actively lubricated bearings applied as calibrated shakers to aid parameter identification in rotordynamics. / Santos, Ilmar; Cerda Varela, Alejandro Javier.

    Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 7B American Society of Mechanical Engineers, 2013. GT2013-95674.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  118. Published

    A deformation mechanism map for polycrystals modeled using strain gradient plasticity and interfaces that slide and separate. / Dahlberg, Carl F.O.; Faleskog, Jonas; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 43, 2013, p. 177-195.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  119. Published

    Adjustable ETHD lubrication applied to the improvement of dynamic performance of flexible rotors supported by active TPJB. / Salazar, Jorge Andrés González; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  120. Published

    Aerodynamic and Mechanical System Modelling. / Jørgensen, Martin Felix; Pedersen, Niels Leergaard (Main supervisor); Sørensen, Jens Nørkær (Supervisor).

    Technical University of Denmark. Department of Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S160).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  121. Published

    A global condition monitoring system for wind turbines. / Schlechtingen, Meik; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S150).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  122. Published

    Analysis of phononic bandgap structures with dissipation. / Andreassen, Erik; Jensen, Jakob Søndergaard.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041015, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  123. Published
  124. Published

    A New Rig for Testing Textured Surfaces in Pure Sliding Conditions. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 50, No. 3, 2013, p. 397-405.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  125. Published
  126. Published

    A Vortex Generator Flow Model Based on Self-Similarity : Technical notes. / Velte, Clara Marika.

    In: AIAA Journal, Vol. 51, No. 2, 2013, p. 526-529.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  127. Published

    Beam section stiffness properties usig 3D finite elements. / Couturier, Philippe; Krenk, Steen; Høgsberg, Jan Becker.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  128. Published

    Characterisation and Testing of Multifunctional Surfaces. / Godi, Alessandro; De Chiffre, Leonardo (Main supervisor); Hansen, Hans Nørgaard (Supervisor); Klit, Peder (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 290 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  129. Published
  130. Published

    Compliant Foil Journal Bearings - Investigation of Dynamic Properties. / Larsen, Jon Steffen; Santos, Ilmar.

    2013. Paper presented at SIRM 2013 , Berlin, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  131. Published

    Design and Optimization of Gearless Drives using Multi-Physics Approach. / Andersen, Søren Bøgh; Santos, Ilmar (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 251 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  132. Published
  133. Published

    Dynamics of Rigid Bodies and Flexible Beam Structures. / Nielsen, Martin Bjerre; Krenk, Steen (Main supervisor).

    DTU Mechanical Engineering, 2013. (DCAMM Special Report; No. S156).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  134. Published

    Efficient Mooring Line Fatigue Analysis Using a Hybrid Method Time Domain Simulation Scheme. / Christiansen, Niels Hørbye; Voie, Per Erlend Torbergsen; Høgsberg, Jan Becker; Sødahl, Nils.

    ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Vol. 1 American Society of Mechanical Engineers, 2013. OMAE2013-10682.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  135. Published

    Energy-release rate and mode mixity of face/core debonds in sandwich beams. / Kardomateas, George A.; Berggreen, Christian; Carlsson, Leif A.

    In: AIAA Journal, Vol. 51, No. 4, 2013, p. 885-892.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  136. Published

    Equal modal damping design for a family of resonant vibration control formats. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Vibration and Control, Vol. 19, No. 9, 2013, p. 1294-1315.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  137. Published

    Estimating Gear Teeth Stiffness. / Pedersen, Niels Leergaard.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.-A. Mardal; A. Massing. Center for Biomedical Computing, Simula Research Laboratory, 2013. p. 225-228.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  138. Published

    Experimental and numerical study of the micro-mechanical failure in composites. / Ashouri Vajari, Danial; Martyniuk, Karolina; Sørensen, Bent F.; Legarth, Brian Nyvang.

    Proceedings of the 19th International Conference on Composite Materials . Canadian Association for Composite Structures and Materials, 2013. p. 5853-5863.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  139. Published
  140. Published

    Experimental calibration of forward and inverse neural networks for rotary type magnetorheological damper. / Bhowmik, Subrata; Weber, Felix; Høgsberg, Jan Becker.

    In: Structural Engineering and Mechanics, Vol. 46, No. 5, 2013, p. 673-693.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  141. Published

    Experimental quantification of contact forces with impact, friction and uncertainty analysis. / Lahriri, Said; Santos, Ilmar.

    In: Tribology International, Vol. 66, 2013, p. 93-104.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  142. Published
  143. Published

    Experimental Validation of Topology Optimization for RF MEMS Capacitive Switch Design. / Philippine, Mandy Axelle; Zareie, Hosein; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 6, 2013, p. 1296-1309.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  144. Published

    Explicit fourth-order stiffness representation in non-linear dynamics. / Krenk, Steen.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  145. Published

    Fracture of anisotropic materials with plastic strain-gradient effects. / Legarth, Brian Nyvang.

    Proceedings - 13th International Conference on Fracture. Chinese Society of Theoretical and Applied Mechanics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  146. Published

    Hybrid Testing of Composite Structures with Single-Axis Control. / Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 19th International Conference on Composite Materials. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  147. Published

    Implementation and applications of a finite-element model for the contact between rough surfaces. / Poulios, Konstantinos; Klit, Peder.

    In: Wear, Vol. 303, No. 1-2, 2013, p. 1-8.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  148. Published

    Improved switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    In: Optics Letters, Vol. 38, No. 14, 2013, p. 2466-2468.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  149. Published

    Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication. / Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  150. Published

    Improving nanocavity switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2013. p. MI1-7.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  151. Published

    Improving Topology Optimization using Games. / Nobel-Jørgensen, Morten; Christiansen, Asger Nyman; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  152. Published

    Interactive topology optimization on hand-held devices. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  153. Published

    Length-scale effect due to periodic variation of geometrically necessary dislocation densities. / Oztop, M. S.; Niordson, Christian Frithiof; Kysar, J. W.

    In: International Journal of Plasticity, Vol. 41, 2013, p. 189-201.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  154. Published

    Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material. / Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders; Izui, Kazuhiro; Nishiwaki, Shinji; Kogiso, Nozomu.

    In: I E E E Transactions on Magnetics, Vol. 49, No. 5, 2013, p. 2081-2084.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  155. Published

    Macromechanical parametric amplification. / Neumeyer, Stefan; Thomsen, Jon Juel.

    2013. Poster session presented at DCAMM 14th Internal Symposium, Nyborg, Denmark.

    Publication: ResearchPoster – Annual report year: 2013

  156. Published

    Macromechanical parametric amplification with a base-excited doubly clamped beam. / Neumeyer, Stefan; Thomsen, Jon Juel.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  157. Published

    Material size effects on crack growth along patterned wafer-level Cu–Cu bonds. / Tvergaard, Viggo; Niordson, Christian Frithiof; Hutchinson, John W.

    In: International Journal of Mechanical Sciences, Vol. 68, 2013, p. 270-276.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  158. Published

    Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery. / Cerda Varela, Alejandro Javier; Santos, Ilmar (Main supervisor).

    Kgs. Lynby : Technical University of Denmark, 2013. 206 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  159. Published
  160. Published

    Multibody drivetrain model used for predicting gear tooth stresses in a planetary gearbox. / Jørgensen, Martin Felix (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  161. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix (Author).

    2013. DCAMM 14th Internal Symposium, Nyborg, Denmark, 13/03/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  162. Published

    Multibody motion in implicitly constrained director format with links via explicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings - ECCOMAS Multibody Dynamics 2013. 2013. p. 231-240.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  163. Published

    Observations on Mode I ductile tearing in sheet metals. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau.

    In: European Journal of Mechanics A - Solids, Vol. 42, 2013, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  164. Published

    On modeling of geometrically necessary dislocation densities in plastically deformed single crystals. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 19th International Symposium on Plasticity & Its Current Applications 2013. NEAT Press, 2013. p. 22-24.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  165. Published

    On strength design using free material subjected to multiple load cases. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 7-17.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  166. Published

    On the similarities between micro/nano lithography and topology optimization projection methods. / Jansen, Miche ; Lazarov, Boyan Stefanov; Schevenels, Mattias ; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 48, No. 4, 2013, p. 717-730.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  167. Published

    Optimization in Nonlinear Structural Dynamics with Reduced Order Models. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2013. Poster session presented at DCAMM 14th Internal Symposium, Nyborg, Denmark.

    Publication: Research - peer-reviewPoster – Annual report year: 2014

  168. Published

    Optimization of Bolt Stress. / Pedersen, Niels Leergaard.

    Proceedings - 10th World Congress on Structural and Multidisciplinary Optimization. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  169. Published

    Optimization of bolt thread stress concentrations. / Pedersen, Niels Leergaard.

    In: Archive of Applied Mechanics, Vol. 83, No. 1, 2013, p. 1-14.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  170. Published

    Optimization of extraordinary optical absorption in plasmonic and dielectric structures. / Dühring, Maria Bayard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 30, No. 5, 2013, p. 1154-1160.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  171. Published

    Optimization of nonlinear structural vibrations using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  172. Published

    Overall bolt stress optimization. / Pedersen, Niels Leergaard.

    In: Journal of Strain Analysis for Engineering Design, Vol. 48, No. 3, 2013, p. 155-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  173. Published

    Parallel framework for topology optimization using the method of moving asymptotes. / Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 4, 2013, p. 493-505.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  174. Published

    Perfectly Matched Layer (PML) for Transient Wave Propagation in a Moving Frame of Reference. / Madsen, Stine Skov; Krenk, Steen; Hededal, Ole.

    Proceedings of the 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  175. Published

    Reflectance spectroscopy from TiO2 particles embedded in polyurethane. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede; Schou, Jørgen; Ambat, Rajan.

    Proceedings of EUROCORR 2013. European Federation of Corrosion, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  176. Published

    Reinforcement layout design for concrete structures based on continuum damage and truss topology optimization. / Amir, Oded; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 2, 2013, p. 157-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  177. Published

    Rigid Body Time Integration by Convected Base Vectors with Implicit Constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    COMPDYN 2013. 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. ed. / M. Papadrakakis; V. Papadopoulos; V. Plevris. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  178. Published

    Robust topology optimization accounting for geometric imperfections. / Schevenels, M.; Jansen, M.; Lombaert, Geert; Lazarov, Boyan Stefanov; Sigmund, Ole.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 4965-4972.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  179. Published

    Robust topology optimization accounting for misplacement of material. / Jansen, Miche; Lombaert, Geert; Diehl, Moritz; Lazarov, Boyan Stefanov; Sigmund, Ole; Schevenels, Mattias.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 3, 2013, p. 317-333.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  180. Published

    Roller chain drive vibration analysis based on a string model with boundaries moving non-smoothly. / Fuglede, Niels; Thomsen, Jon Juel.

    2013. Abstract from 3rd International Conference on Vibro Impact Systems and Systems with Non-smooth Interactions, Leinsweiler, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  181. Published

    Shape optimization of the stokes flow problem based on isogeometric analysis. / Park, Byong-Ug ; Seo, Yu-Deok ; Sigmund, Ole; Youn, Sung-Kie.

    In: Structural and Multidisciplinary Optimization, Vol. 48, 2013, p. 965-977.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  182. Published

    Statics and Mechanics of Structures. / Krenk, Steen; Høgsberg, Jan Becker.

    Springer Science+Business Media B.V., 2013. 506 p.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  183. Published

    Static strain and deformation controlled testing of composite beams. / Høgh, Jacob Herold; Waldbjørn, Jacob Paamand; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 6th International Conference on Composites Testing and Model Identification. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  184. Published

    Statistics of ductile fracture surfaces: the effect of material parameters. / Ponson, Laurent ; Cao, Yuanyuan ; Bouchaud, Elisabeth ; Tvergaard, Viggo; Needleman, Alan .

    In: International Journal of Fracture, Vol. 184, No. 1-2, 2013, p. 137-149.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  185. Published
  186. Published

    Structural Color Optimization using Scalar Diffraction Theory. / Johansen, Villads Egede; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  187. Published

    Structural eigenfrequency optimization based on local sub-domain "frequencies". / Pedersen, Pauli; Pedersen, Niels Leergaard.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  188. Published

    Structural Reliability of Wind Turbine Blades : Design Methods and Evaluation. / Dimitrov, Nikolay Krasimirov; Staerdahl, Jesper (Supervisor); Friis-Hansen, Peter (Supervisor); Berggreen, Christian (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 214 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  189. Published

    Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines. / Klit, Peder; Persson, Sebastian; Vølund, Anders.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  190. Published

    Testing of newly developed functional surfaces under pure sliding conditions. / Godi, Alessandro; Mohaghegh, Kamran; Grønbæk, J.; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 51, No. 1, 2013, p. 171-180.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  191. Published

    Theoretical modelling, analysis and validation of the shaft motion and dynamic forces during rotor–stator contact. / Lahriri, Said; Santos, Ilmar.

    In: Journal of Sound and Vibration, Vol. 332, No. 24, 2013, p. 6359-6376.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  192. Published

    Time-domain analysis of frequency dependent inertial wave forces on cylinders. / Krenk, Steen.

    In: Computers and Structures, Vol. 126, 2013, p. 184-192.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  193. Published

    Time-domain representation of frequency dependent inertial forces on offshore structures. / Krenk, Steen.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 1009-1016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  194. Published

    Topological design of electromechanical actuators with robustness toward over- and under-etching. / Qian, Xiaoping ; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 253, 2013, p. 237–251.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  195. Published
  196. Published

    Topology Optimisation for Coupled Convection Problems. / Alexandersen, Joe; Andreasen, Casper Schousboe; Aage, Niels; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  197. Published

    Topology Optimisation for Coupled Convection Problems. / Alexandersen, Joe; Andreasen, Casper Schousboe; Aage, Niels; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: ResearchConference abstract for conference – Annual report year: 2013

  198. Published

    Topology optimization approaches : A comparative review. / Sigmund, Ole; Maute, Kurt.

    In: Structural and Multidisciplinary Optimization, Vol. 48, No. 6, 2013, p. 1031-1055.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  199. Published

    Topology optimization of fluid-structure-interaction problems in poroelasticity. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 258, 2013, p. 55-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  200. Published

    Topology Optimization of Stressed Capacitive RF MEMS Switches. / Philippine, Mandy A.; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 1, 2013, p. 206-215.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  201. Published

    Topology Optimization using an Explicit Interface Representation. / Christiansen, Asger Nyman; Nobel-Jørgensen, Morten; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  202. Published

    Topology optimized cloak for airborne sound. / Andkjær, Jacob Anders; Sigmund, Ole.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041011, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  203. Published

    Topology Optimized Mode Conversion In a Photonic Crystal Waveguide. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Ding, Yunhong; Sigmund, Ole; Yvind, Kresten.

    2013 IEEE Photonics Conference (IPC). IEEE, 2013. p. 333-334.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  204. Published

    Topology optimized RF MEMS switches. / Philippine, M. A.; Zareie, H.; Sigmund, Ole; Rebeiz, G. M.; Kenny, T. W.

    2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems. IEEE, 2013. p. 2477-2480.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  205. Published

    Tribology of a Combined Yaw Bearing and Brake. / Poulios, Konstantinos (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  206. Published

    Using Data-Mining Approaches for Wind Turbine Power Curve Monitoring: A Comparative Study. / Schlechtingen, Meik; Santos, Ilmar; Achiche, Sofiane .

    In: I E E E Transactions on Sustainable Energy, Vol. 4, No. 3, 2013, p. 671-679.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  207. Published

    Wavelength Selective 3D Topology Optimized Photonic Crystal Devices. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Sigmund, Ole; Jensen, Jakob Søndergaard; Yvind, Kresten.

    CLEO Technical Digest. Optical Society of America, 2013. p. CTh4L.6.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  208. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 1: System description. / Schlechtingen, Meik; Santos, Ilmar; Achiche, Sofiane.

    In: Applied Soft Computing, Vol. 13, 2013, p. 259-270.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  209. 2012
  210. Published

    A conservative quaternion-based time integration algorithm for rigid body rotations with implicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. ed. / K. Persson; J. Revstedt; G. Sandberg; M. Wallin. Lund University Faculty of Engineering, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  211. Published

    Acoustical topology optimization for Zwicker's loudness model - Application to noise barriers. / Kook, Junghwan; Koo, Kunmo; Hyun, Jaeyub; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 237-240, 2012, p. 130-151.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  212. Published

    A Family of Resonant Vibration Control Formats. / Krenk, Steen; Høgsberg, Jan Becker.

    2012. Paper presented at EACS 2012, Genoa, Italy.

    Publication: Research - peer-reviewPaper – Annual report year: 2012

  213. Published

    Afleveringer i løbet af semestret som driver for eksamensaktivitet. / Richelsen, Ann Bettina.

    2012. Abstract from DTU Undervisningsbiennale 2012 / DTU Teaching Biennial 2012, Kgs.Lyngby, Denmark.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  214. Published

    An Axial Sliding Test for machine elements surfaces. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    Proceedings of the 15th Nordic Symposium on Tribology . 2012.

    Publication: ResearchConference abstract in proceedings – Annual report year: 2012

  215. Published

    A topology optimization method based on the level set method for the design of negative permeability dielectric metamaterials. / Otomori, Masaki; Yamada, Takayuki; Izui, Kazuhiro; Nishiwaki, Shinji; Andkjær, Jacob.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 237-240, 2012, p. 192-211.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  216. Published

    Balanced calibration of resonant shunt circuits for piezoelectric vibration control. / Høgsberg, Jan; Krenk, Steen.

    In: Journal of Intelligent Material Systems and Structures, Vol. 23, No. 17, 2012, p. 1937-1948.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  217. Published

    Balanced Design of Resonant Shunted Piezoelectric Vibration Control. / Høgsberg, Jan Becker; Krenk, Steen.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  218. Published
  219. Published

    Bolt Thread Stress Optimization. / Pedersen, Niels Leergaard.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  220. Published

    Coefficient of Friction Measurements for Thermoplastics and Fiber Composites under Low Sliding Velocity and High Pressure. / Poulios, Konstantinos; Svendsen, G.; Hiller, Jochen; Klit, Peder.

    Proceedings of the 15th Nordic Symposium on Tribology . 2012.

    Publication: ResearchConference abstract in proceedings – Annual report year: 2012

  221. Published

    Cohesive traction–separation laws for tearing of ductile metal plates. / Nielsen, Kim Lau; Hutchinson, John W.

    In: International Journal of Impact Engineering, Vol. 48, 2012, p. 15-23.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  222. Published

    Cohesive Traction-Separation Laws for Tearing of Ductile Metal Plates. / Nielsen, Kim Lau; Hutchinson, J.W.

    Proceedings for 8th EUROMECH Solid Mechanics Conference (ESMC2012). 2012.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2012

  223. Published

    Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D. / Nielsen, Kim Lau; Dahl, Jonas; Tvergaard, Viggo.

    In: International Journal of Fracture, Vol. 177, No. 2, 2012, p. 97-108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  224. Published
  225. Published

    Condition monitoring with ordinary wind turbine SCADA data – A neuro-fuzzy approach. / Schlechtingen, Meik; Santos, Ilmar.

    2012. Paper presented at Offshore 2011, Amsterdam, Netherlands.

    Publication: ResearchPaper – Annual report year: 2012

  226. Published

    Condition monitoring with wind turbine SCADA data using Neuro-Fuzzy normal behavior models. / Schlechtingen, Meik; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 6 American Society of Mechanical Engineers, 2012. p. 717-726.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  227. Published

    Conservative integration of rigid body motion by quaternion parameters with implicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 92, No. 8, 2012, p. 734-752.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  228. Published

    Conservative Time-Integration of Rigid Body Motion with Implicit Constraints by Quaternion Parameters. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceeding of 8th European Solid Mechanics Conference. 2012.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2012

  229. Published

    Controllable Lubrication for Main Engine Bearings Using Mechanical and Piezoelectric Actuators. / Estupinan, Edgar; Santos, Ilmar.

    In: I E E E - A S M E Transactions on Mechatronics, Vol. 17, No. 2, 2012, p. 279-287.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  230. Published

    Debonding analyses in anisotropic materials with strain- gradient effects. / Legarth, Brian Nyvang.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. Lund University, 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  231. Published

    Debonding Analyses in Anisotropic Materials with Strain-Gradient Effects. / Legarth, Brian Nyvang.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics . 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  232. Published

    Design of robust and efficient photonic switches using topology optimization. / Elesin, Yuriy; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Photonics and Nanostructures, Vol. 10, No. 1, 2012, p. 153-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  233. Published

    Dynamic Response to Pedestrian Loads with Statistical Frequency Distribution. / Krenk, Steen.

    In: Journal of Engineering Mechanics, Vol. 138, 2012, p. 1275-1281.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  234. Published

    Effect of Contact Conditions on Void Coalescence at Low Stress Triaxiality Shearing. / Dahl, Jonas; Nielsen, Kim Lau; Tvergaard, Viggo.

    In: Journal of Applied Mechanics, Vol. 79, No. 2, 2012, p. 021003.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  235. Published

    Effect of stress-state and spacing on voids in a shear-field. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 49, No. 22, 2012, p. 3047-3054.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  236. Published

    Effect of viscoplastic material parameters on polymer indentation. / Tvergaard, V; Needleman, A.

    In: Modelling and Simulation in Materials Science and Engineering, Vol. 20, No. 6, 2012, p. Paper 065002.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  237. Published

    Effects of Uneven Interfacial Strength on Damage Evolution in Composites. / Ashouri Vajari, Danial; Legarth, Brian Nyvang; Niordson, Christian Frithiof.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  238. Published

    Efficient reanalysis techniques for robust topology optimization. / Amir, Oded; Sigmund, Ole; Lazarov, Boyan Stefanov; Schevenels, Mattias.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 245-246, 2012, p. 217-231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  239. Published

    Enhancing the Damping Properties of Viscoelastic Composites by Topology Optimization. / Andreasen, Casper Schousboe; Andreassen, Erik; Sigmund, Ole; Jensen, Jakob Søndergaard.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  240. Published

    Evolution strategies and multi-objective optimization of permanent magnet motor. / Andersen, Søren Bøgh; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 12, No. 2, 2012, p. 778-792.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  241. Published

    Experimental Bifurcation Analysis By Control-based Continuation - Determining Stability’. / Bureau, Emil; Santos, Ilmar; Thomsen, Jon Juel; Schilder, Frank; Starke, Jens.

    Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. p. DETC2012-70616.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  242. Published

    Experimental investigations of active air bearings. / Santos, Ilmar; Morosi, Stefano.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 901-910.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  243. Published
  244. Published

    Free Material Design with Multiple Load Cases. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  245. Published
  246. Published

    Fundamental limitations to gain enhancement in slow-light photonic structures. / Grgic, Jure; Ott, Johan Raunkjar; Wang, Fengwen; Sigmund, Ole; Jauho, Antti-Pekka; Mork, Jesper; Mortensen, N. Asger.

    2012 Conference on Lasers and Electro-Optics. Optical Society of America (OSA), 2012. (CLEO Technical Digest).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  247. Published
  248. Published
  249. Published
  250. Published

    Interactive topology optimization. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    2012. Abstract from 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  251. Published

    Interpolation/penalization applied for strength design of 3D thermoelastic structures. / Pedersen, Pauli; Pedersen, Niels L.

    In: Structural and Multidisciplinary Optimization, Vol. 45, No. 6, 2012, p. 773-786.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  252. Published

    Inverse design of dielectric materials by topology optimization. / Otomori, M.; Andkjær, Jacob Anders; Sigmund, Ole; Izui, K.; Nishiwaki, S.

    In: Progress in Electromagnetics Research, Vol. 127, 2012, p. 93-120.

    Publication: ResearchJournal article – Annual report year: 2012

  253. Published

    Investigation of Model Simplification and Its Influence on the Accuracy in FEM Magnetic Calculations of Gearless Drives. / Andersen, Søren Bøgh; Santos, Ilmar F.; Fuerst, Axel.

    In: I E E E Transactions on Magnetics, Vol. 48, No. 7, 2012, p. 2166-2177.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  254. Published

    Isogeometric Analysis and Shape Optimization in Fluid Mechanics. / Nielsen, Peter Nørtoft; Gravesen, Jens (Supervisor); Gersborg, Allan Roulund (Supervisor); Pedersen, Niels Leergaard (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2012. 143 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  255. Published

    Light Scattering of TiO2 Nanoparticles Embedded in Polyurethane. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede; Ambat, Rajan; Schou, Jørgen; Sigmund, Ole.

    2012. Abstract from Northern Optics 2012, Snekkersten, Denmark.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  256. Published

    Macroscale mechanical domain parametric amplification: superthreshold pumping and optimal excitation parameters. / Neumeyer, Stefan; Thomsen, Jon Juel.

    EUROMECH Colloquium 532 : 1st International Colloquium on Time periodic systems (TPS). Current trends in theory and application. Technische Universität Darmstadt, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  257. Published

    Micromechanical modeling of damage in periodic composites using strain gradient plasticity. / Azizi, Reza.

    In: Engineering Fracture Mechanics, Vol. 92, 2012, p. 101-113.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  258. Published

    Modeling of dynamically loaded hydrodynamic bearings at low Sommerfeld numbers. / Thomsen, Kim; Klit, Peder (Supervisor); Vølund, Anders (Supervisor); Santos, Ilmar (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 218 p. (DCAMM Special Report; No. 5144).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  259. Published

    Modelling and Control of Magnetorheological Damper : Real-time implementation and experimental verification. / Bhowmik, Subrata; Høgsberg, Jan Becker (Main supervisor); Krenk, Steen (Supervisor); Weber, Felix (Supervisor).

    DTU Mechanical Engineering, 2012. 198 p. (DCAMM Special Report; No. S139).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  260. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix; Pedersen, Niels Leergaard; Sørensen, Jens Nørkær.

    2012. Abstract from ICTAM 2012, Beijing, China.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  261. Published

    Multiscale modeling and topology optimization of poroelastic actuators. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Smart Materials and Structures, Vol. 21, No. 6, 2012, p. Paper 065005.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  262. Published

    On cavitation instabilities with interacting voids. / Tvergaard, Viggo.

    In: European Journal of Mechanics A - Solids, Vol. 32, 2012, p. 52-58.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  263. Published

    On size-effects in single crystal wedge indentation. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 18th International Symposium on Plasticity & Its Current Applications. NEAT Press, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  264. Published

    On the nonlinear dynamics of two types of backup bearings - Theoretical and experimental aspects. / Lahriri, Said; Santos, Ilmar F.; Weber, Hans I.; Hartmann, Henning.

    In: Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 11, 2012, p. Paper 112503.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  265. Published

    On the nonlinear dynamics of two types of backup bearings - Theoretical and experimental aspects. / Lahriri, Said; Santos, Ilmar; Hartmann, Henning; Weber, Hans I.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 805-821.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  266. Published

    On the Rotor to Stator Contact Dynamics with Impacts and Friction - Theoretical and Experimental Study. / Lahriri, Said; Santos, Ilmar (Main supervisor); Hartmann, Henning (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2012. 195 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  267. Published

    On the simplifications for the thermal modeling of tilting-pad journal bearings under thermoelastohydrodynamic regime. / Cerda Varela, Alejandro Javier; Fillon, Michel; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 823-835.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  268. Published

    Optimal Brain Surgeon on Artificial Neural Networks in. / Christiansen, Niels Hørbye; Job, Jonas Hultmann; Klyver, Katrine; Høgsberg, Jan Becker.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  269. Published

    Optimized manufacturable porous materials. / Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard; Sigmund, Ole.

    2012. Abstract from APM 2012 Advanved Problems in Mechanics, Saint Petersburg, Russian Federation.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  270. Published

    Optimizing the microstructure of dissipative materials. / Andreassen, Erik; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard.

    2012. Paper presented at International Workshop on Computational Mechanics of Materials, Baltimore, MD, United States.

    Publication: ResearchPaper – Annual report year: 2012

  271. Published

    Parallel Sparse Matrix - Vector Product : Pure MPI and hybrid MPI-OpenMP implementation. / Alexandersen, Joe; Lazarov, Boyan Stefanov; Dammann, Bernd.

    Kgs. Lyngby : Technical University of Denmark, 2012. 61 p. (IMM-Technical Report-2012; No. 10).

    Publication: ResearchReport – Annual report year: 2012

  272. Published

    Parametric Study of the Device Angle Dependency of a Single Vortex Generator on a Flat Plate. / Fernandez, U.; Réthoré, Pierre-Elouan; Sørensen, Niels N.; Velte, Clara Marika; Zahle, Frederik; Egusquiza, E.

    2012. Paper presented at 10th World Congress on Computational Mechanics (WCCM 2012), Sao Paulo, Brazil.

    Publication: Research - peer-reviewPaper – Annual report year: 2012

  273. Published

    Performance Improvement of tilting-pad journal bearings by means of controllable lubrication. / Cerda, Alejandro; Santos, Ilmar.

    In: Mechanics & Industry, Vol. 13, No. 1, 2012, p. 17-32.

    Publication: ResearchJournal article – Annual report year: 2012

  274. Published

    Plasmonic versus dielectric enhancement in thin-film solar cells. / Dühring, Maria Bayard; Mortensen, N. Asger; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 100, No. 21, 2012, p. 211914.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  275. Published

    Prediction of Ductile Fracture Surface Roughness Scaling. / Needleman, Alan; Tvergaard, Viggo; Bouchaud, Elisabeth.

    In: Journal of Applied Mechanics, Vol. 79, No. 3, 2012, p. Paper 031015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  276. Published

    Radial oil injection applied to main engine bearings: evaluation of injection control rules. / Estupiñan, EA; Santos, Ilmar.

    In: Journal of Vibration and Control, Vol. 18, No. 5, 2012, p. 587-595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  277. Published
  278. Published

    Reduction of initial stress stiffening by topology optimization. / Philippine, M. A.; Sigmund, Ole; Rebeiz, G. M.; Kenny, T. W.

    Proceedings of 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP). IEEE, 2012. p. 148-153.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  279. Published

    Rezimy obtekanija vichrevogo generatora. / Velte, Clara Marika; Okulov, Valery; Naumov, I.V.

    In: Technical Physics Letters, Vol. 38, No. 8, 2012, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  280. Published

    Robust topology design of periodic grating surfaces. / Friis, Kasper Storgaard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 29, No. 10, 2012, p. 2935-2943.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  281. Published

    Rotor–stator contact dynamics using a non-ideal drive : Theoretical and experimental aspects. / Lahriri, Said; Weber, H.I.Hans I.; Santos, I.F.Ilmar F.; Hartmann, Henning.

    In: Journal of Sound and Vibration, Vol. 331, No. 20, 2012, p. 4518-4536.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  282. Published

    Sensitivity filtering from a continuum mechanics perspective. / Sigmund, Ole; Maute, Kurt.

    In: Structural and Multidisciplinary Optimization, Vol. 46, No. 4, 2012, p. 471-475.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  283. Published
  284. Published

    Steady State Crack Propagation in Layered Material Systems Displaying Visco-plastic Behaviour. / Nielsen, Kim Lau.

    Proceedings for 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012). 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  285. Published
  286. Published

    Structural Optimization of Wind Turbine Rotor Blades by Multi-Level Sectional/Multibody/3DFEM Analysis. / Bottasso, C. L.; Campagnolo, F.; Croce, A.; Dilli, S.; Gualdoni, F.; Nielsen, Martin Bjerre.

    Politecnico Di Milano, 2012. 27 p.

    Publication: Research - peer-reviewReport – Annual report year: 2012

  287. Published
  288. Published

    Systematic Design of Slow Light Waveguides. / Wang, Fengwen; Jensen, Jakob Søndergaard (Supervisor); Sigmund, Ole (Supervisor); Mørk, Jesper (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 166 p. (DCAMM Special Report; No. S145).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  289. Published
  290. Published

    Theoretical and Experimental Investigation of Force Estimation Errors Using Active Magnetic Bearings with Embedded Hall Sensors. / Voigt, Andreas Jauernik; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 7, Parts A and B American Society of Mechanical Engineers, 2012. p. 779-793.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  291. Published

    Topology optimization considering material and geometric uncertainties using stochastic collocation methods. / Lazarov, Boyan Stefanov; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 46, No. 4, 2012, p. 597-612.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  292. Published

    Topology optimization of antennas and resonators. / Aage, Niels; Sigmund, Ole.

    2012. Paper presented at 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan.

    Publication: ResearchPaper – Annual report year: 2012

  293. Published

    Topology optimization of nano-photonic systems. / Elesin, Yuriy; Wang, Fengwen; Andkjær, Jacob Anders; Jensen, Jakob Søndergaard; Sigmund, Ole.

    Advanced Photonics Congress. Optical Society of America, 2012. p. IM2B.4.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  294. Published

    Topology optimization of optical surfaces. / Friis, Kasper Storgaard; Sigmund, Ole.

    2012. Poster session presented at PECS-X: 10th International Symposium on Photonic and Electromagnetic Crystal Structures, Santa Fe, NM, United States.

    Publication: ResearchPoster – Annual report year: 2012

  295. Published

    Topology optimization with geometric uncertainties by perturbation techniques. / Lazarov, Boyan Stefanov; Schevenels, M.; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 90, No. 11, 2012, p. 1321-1336.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  296. Published

    Towards all-dielectric, polarization-independent optical cloaks. / Andkjær, Jacob Anders; Mortensen, N. Asger; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 100, No. 10, 2012, p. Paper 101106.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  297. Published

    Vibrations of axially moving strings with in-plane oscillating supports. / Fuglede, Niels; Thomsen, Jon Juel.

    2012. Abstract from EUROMECH Colloquium 532 , Darmstadt, Germany.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  298. Published

    Wave Manipulation by Topology Optimization. / Andkjær, Jacob Anders; Sigmund, Ole (Supervisor); Breinbjerg, Olav (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 116 p. (DCAMM Special Report; No. S140).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  299. 2011
  300. Published
  301. Published

    Automated Design of Advanced Mechatronic Systems. / Dupuis, Jean-Francois; Fan, Zhun (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  302. Published

    Shallow Water Tuned Liquid Dampers : Modeling, simulation and experiments. / Krabbenhøft, Jørgen; Georgakis, Christos T. (Supervisor); Santos, Ilmar (Supervisor); Poulsen, Peter Noe (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  303. Published

    Active lubrication applied to radial gas journal bearings. Part 1: Modeling. / Morosi, Stefano; Santos, Ilmar.

    In: Tribology International, Vol. 44, No. 12, 2011, p. 1949-1958.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  304. Published

    An explicit parameterization for casting constraints in gradient driven topology optimization. / Gersborg, Allan Roulund; Andreasen, Casper Schousboe.

    In: Structural and Multidisciplinary Optimization, Vol. 44, No. 6, 2011, p. 875-881.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  305. Published

    A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing. / Thomsen, Kim; Klit, Peder.

    In: Tribology International, Vol. 44, No. 12, 2011, p. 1872-1877.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  306. Published

    Basic Strain Gradient Plasticity Theories with Application to Constrained Film Deformation. / Niordson, Christian Frithiof; Hutchinson, John W.

    In: Journal of Mechanics of Materials and Structures, Vol. 6, No. 1-4, 2011, p. 395-416.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  307. Published
  308. Published

    Comparison between different dispersion engineering methods in slow light photonic crystal waveguides. / Wang, Fengwen; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: AIP Conference Proceedings, Vol. 1398, 2011, p. 180-182.

    Publication: Research - peer-reviewConference article – Annual report year: 2011

  309. Published

    Computational Strain Gradient Crystal Plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 17th International Symposium on Plasticity & Its Current Applications. NEAT Press, 2011. p. 13-15.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  310. Published

    Design objectives with non-zero prescribed support displacements. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 2, 2011, p. 205-214.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  311. Published
  312. Published
  313. Published

    Efficient Reanalysis Procedures in Structural Topology Optimization. / Amir, Oded; Stolpe, Mathias (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 155 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  314. Published

    Efficient topology optimization in MATLAB using 88 lines of code. / Andreassen, Erik; Clausen, Anders; Schevenels, Mattias; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 1, 2011, p. 1-16.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  315. Published

    Elastic–plastic void expansion in near-self-similar shapes. / Tvergaard, Viggo.

    In: Computational Materials Science, Vol. 50, No. 11, 2011, p. 3105-3109.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  316. Published

    Experimental bifurcation analysis for a driven nonlinear flexible pendulum using control-based continuation. / Bureau, Emil; Schilder, Frank; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  317. Published

    Experimental bifurcation by using control-based continuation. / Bureau, Emil (Author); Santos, Ilmar (Author); Thomsen, Jon Juel (Author); Starke, Jens (Author); Schilder, Frank (Author); Elmegård, Michael (Author).

    2011. DCAMM 13th internal Symposium, Vejle, 01/01/11.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2011

  318. Published
  319. Published

    Factorized parallel preconditioner for the saddle point problem. / Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: International Journal for Numerical Methods in Biomedical Engineering, Vol. 27, No. 9, 2011, p. 1398-1410.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  320. Published
  321. Published

    Filters in topology optimization based on Helmholtz‐type differential equations. / Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 86, No. 6, 2011, p. 765-781.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  322. Published

    From Hybrid to Actively-Controlled Gas Lubricated Bearings – Theory and Experiment. / Morosi, Stefano; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2011. 279 p. (DCAMM Special Report; No. S137).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  323. Published

    Guiding Simulations and Experiments using Continuation. / Bureau, Emil (Author); Schilder, Frank (Author); Avrutin, Viktor (Author); Starke, Jens (Author); Santos, Ilmar (Author); Thomsen, Jon Juel (Author).

    2011. School and Conference on Computational Methods in Dynamics, Trieste, Italy, 01/01/11.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2011

  324. Published

    Isogeometric shape optimization of photonic crystals via Coons patches. / Qian, Xiaoping; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, No. 25-28, 2011, p. 2237-2255.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  325. Published

    Life expectancy of modular Ti6Al4V hip implants: Influence of stress and environment. / Chandra, A.; Ryu, J.J.; Karra, P.; Shrotriya, P.; Tvergaard, Viggo; Gaisser, M.; Weik, T.

    In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 4, No. 8, 2011, p. 1990-2001.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  326. Published

    Low-dimensional approximations for Finite Element Models of mechanical systems. / Elmegaard, Michael; Starke, Jens; Schilder, Frank; Thomsen, Jon Juel.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  327. Published

    Maximizing opto‐mechanical interaction using topology optimization. / Gersborg, Allan Roulund; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 87, No. 9, 2011, p. 822-843.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  328. Published

    Measuring student performance in an international MSc programme. / Richelsen, Ann Bettina.

    ICEE2011: Engineering Sustainability for a Global Economy. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  329. Published

    Minimal compliance design for metal–ceramic composites with lamellar microstructures. / Piat, R.; Sinchuk, Y.; Vasoya, M.; Sigmund, Ole.

    In: Acta Materialia, Vol. 59, No. 12, 2011, p. 4835-4846.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  330. Published

    Modelling of Active Semiconductor Photonic Crystal Waveguides and Robust Designs based on Topology Optimization. / Chen, Yaohui (Invited author); Wang, Fengwen (Invited author); Ek, Sara (Invited author); Jensen, Jakob Søndergaard (Invited author); Sigmund, Ole (Invited author); Mørk, Jesper (Invited author).

    2011 13th International Conference on Transparent Optical Networks (ICTON). IEEE, 2011. p. We.C4.1 (Uden navn).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  331. Published

    Multi-scale modeling of composites. / Azizi, Reza; Niordson, Christian Frithiof (Supervisor); Legarth, Brian Nyvang (Supervisor); Tvergaard, Viggo (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. (DCAMM Special Report; No. S135).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  332. Published

    Multiscale optimization of saturated poroelastic actuators. / Andreasen, Casper Schousboe; Sigmund, Ole.

    2011. Abstract from EUROMECH522 Kolloquium : Recent Trends in Optimisation for Computational Solid Mechanics, Erlangen, Germany, .

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2011

  333. Published

    Multiscale topology optimization of solid and fluid structures. / Andreasen, Casper Schousboe; Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 158 p. (DCAMM Special Report; No. S131).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  334. Published

    Nonlinear Study of Industrial Arc Spring Dampers. / Lahriri, Said (Invited author); Santos, Ilmar (Invited author); Hartmann, Henning (Invited author).

    Proceedings of the 14. International Symposium on Dynamic Problems of Mechanics. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  335. Published

    On Controllable Elastohydrodynamic Fluid Film Bearings. / Haugaard, Martin Asger; Klit, Peder (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 182 p. (DCAMM Special Report; No. S125).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  336. E-pub ahead of print

    On projection methods, convergence and robust formulations in topology optimization. / Wang, Fengwen; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 6, 2011, p. 767-784.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  337. Published

    On reducing computational effort in topology optimization: how far can we go?. / Amir, Oded; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 44, No. 1, 2011, p. 25-29.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  338. Published

    On the future of controllable fluid film bearings. / Santos, Ilmar.

    In: Mecanique et Industries, Vol. 12, No. 4, 2011, p. 275.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  339. Published
  340. Published

    On the nonlinear design of industrial arc spring dampers. / Lahriri, Said (Invited author); Santos, Ilmar (Invited author); Hartmann, Henning (Invited author).

    SIRM 2011. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  341. Published

    On the usefulness of non-gradient approaches in topology optimization. / Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 5, 2011, p. 589-596.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  342. Published

    Optimization of straight-sided spline design. / Pedersen, Niels Leergaard.

    In: Archive of Applied Mechanics, Vol. 81, No. 10, 2011, p. 1393-1407.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  343. Published

    Optimized designs for 2D and 3D thermoelastic structures. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  344. Published

    Perforator and assembly for perforating and providing an opening. / Klit, Peder (Inventor); Klit, Anders (Inventor).

    Patent No.: WO 2011073249. Jun 23, 2011.

    Publication: ResearchPatent – Annual report year: 2011

  345. E-pub ahead of print

    Polymer indentation: Numerical analysis and comparison with a spherical cavity model. / Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 59, No. 9, 2011, p. 1669-1684.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  346. E-pub ahead of print

    Predicting phase shift effects for vibrating fluid-conveying pipes due to Coriolis forces and fluid pulsation. / Enz, Stephanie; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 330, No. 21, 2011, p. 5096-5113.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  347. Published

    Robust design of large-displacement compliant mechanisms. / Lazarov, Boyan Stefanov; Schevenels, M.; Sigmund, Ole.

    In: Mechanical Sciences, Vol. 2, No. 2, 2011, p. 175-182.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  348. Published

    Robust topology optimization accounting for spatially varying manufacturing errors. / Schevenels, M.; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, No. 49-52, 2011, p. 3613-3627.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  349. Published
  350. Published

    Roller chain drive analysis: simplified modeling and analysis of the dynamic effects of meshing. / Fuglede, Niels; Thomsen, Jon Juel.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  351. Published

    Saturated poroelastic actuators generated by topology optimization. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 5, 2011, p. 693-706.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  352. Published

    Size-effects on yield surfaces for micro reinforced composites. / Azizi, Reza; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 27, No. 11, 2011, p. 1817-1832.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  353. Published

    Static, Dynamic, and Thermal Properties of Compressible Fluid Film Journal Bearings. / Paulsen, Bo Terp; Morosi, Stefano; Santos, Ilmar.

    In: Tribology Transactions, Vol. 54, No. 2, 2011, p. 282-299.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  354. Published

    Stiffness and design for strength of trapezoidal Belleville springs. / Pedersen, Niels Leergaard; Pedersen, Pauli.

    In: Journal of Strain Analysis for Engineering Design, Vol. 46, No. 8, 2011, p. 825-836.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  355. Published

    Straight-sided Spline Optimization. / Pedersen, Niels Leergaard.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  356. Published

    Student performance in a newly developed MSc programme. / Richelsen, Ann Bettina.

    SEFI 2011 Annual Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  357. E-pub ahead of print

    Systematic design of slow-light photonic waveguides. / Matzen, René; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 28, No. 10, 2011, p. 2374-2382.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  358. Published
  359. Published

    Topology Optimization for Conceptual Design of Reinforced Concrete Structures. / Amir, Oded; Bogomolny, Michael.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  360. Published

    Topology optimization for nano-photonics. / Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Laser & Photonics Reviews, Vol. 5, No. 2, 2011, p. 308-321.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  361. Published

    Topology Optimization for Transient Wave Propagation Problems. / Matzen, René; Sigmund, Ole (Supervisor); Jensen, Jakob Søndergaard (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 198 p. (DCAMM Special Report; No. S130).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  362. Published

    Topology Optimization of Nanophotonic Devices. / Yang, Lirong; Hvam, Jørn Märcher (Supervisor); Sigmund, Ole (Supervisor); Lavrinenko, Andrei (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 105 p. (FOTONIK-PHD).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  363. E-pub ahead of print

    Topology optimization of nonlinear optical devices. / Jensen, Jakob Søndergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 6, 2011, p. 731-743.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  364. Published
  365. Published

    Topology optimization of radio frequency and microwave structures. / Aage, Niels; Sigmund, Ole (Supervisor); Breinbjerg, Olav (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 150 p. (DCAMM Special Report; No. S129).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  366. Published

    Topology optimization of reinforced concrete structures. / Amir, Oded (Author).

    2011. EUROMECH 522 Colloquium, Erlangen, Germany, 10/10/11.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2011

  367. Published

    Topology optimization of reinforced concrete structures. / Amir, Oded.

    2011. Abstract from EUROMECH 522 Colloquium, Erlangen, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2011

  368. Published

    Topology Optimization of Sub-Wavelength Antennas. / Erentok, Aycan; Sigmund, Ole.

    In: I E E E Transactions on Antennas and Propagation, Vol. 59, No. 1, 2011, p. 58-69.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  369. Published

    Topology optimization of ultra-fast nano-photonic switches. / Elesin, Yuriy; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: A I P Conference Proceedings Series, Vol. 1398, 2011, p. 129-131.

    Publication: Research - peer-reviewConference article – Annual report year: 2011

  370. Published

    Topology optimized low-contrast all-dielectric optical cloak. / Andkjær, Jacob Anders; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 98, No. 2, 2011, p. 021112.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  371. Published

    Trends in Controllable Oil Film Bearings. / Santos, Ilmar (Invited author).

    IUTAM Symposium on Emerging Trends in Rotordynamics. ed. / K. Gupta. Springer, 2011. p. 185-199 (IUTAM Bookseries; No. 25).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  372. Published

    Void shape effects and voids starting from cracked inclusion. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 48, No. 7-8, 2011, p. 1101-1108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  373. Published

    Waves and vibrations in inhomogeneous structures : bandgaps and optimal designs. / Jensen, Jakob Søndergaard.

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 313 p.

    Publication: ResearchDoctoral thesis – Annual report year: 2011

  374. 2010
  375. Published

    Factors Affecting Coriolis Flowmeter Accuracy, Precision, and Robustness. / Enz, Stephanie; Thomsen, Jon Juel (Supervisor); Møller, Per (Supervisor); Davidsen, Lars (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 210 p. (DCAMM Special Report; No. S119).

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  376. Published

    Efficient use of iterative solvers in nested topology optimization. / Amir, Oded; Stolpe, Mathias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 42, No. 1, 07.2010, p. 55-72.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  377. Published

    Dynamic Modeling of Wind Turbine Gearboxes and Experimental Validation. / Pedersen, Rune; Santos, Ilmar (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 108 p. (DCAMM Special Repport; No. S113).

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  378. Published

    Topology optimization problems with design-dependent sets of constraints. / Schou, Marie-Louise Højlund; Stolpe, Mathias (Supervisor); Evgrafov, Anton (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 213 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  379. Published

    Modelling of damage development and ductile failure in welded joints. / Nielsen, Kim Lau; Tvergaard, Viggo (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 246 p. (DCAMM Special Report; No. S110).

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  380. Published

    Microtools for Automated Nanomanipulation. / Sardan Sukas, Özlem; Mølhave, Kristian (Supervisor); Sigmund, Ole (Supervisor); Bøggild, Peter (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010.

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  381. Published
  382. Published

    3D analyses of cavitation instabilities accounting for plastic anisotropy. / Legarth, Brian Nyvang; Tvergaard, Viggo.

    In: Zeitschrift fuer Angewandte Mathematik und Mechanik, Vol. 90, No. 9, 2010, p. 701-709.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  383. Published

    Advantages and Drawbacks of Applying Periodic Time-Variant Modal Analysis to Spur Gear Dynamics. / Pedersen, Rune; Santos, Ilmar; Hede, Ivan Arthur.

    In: Mechanical Systems and Signal Processing, Vol. 24, No. 5, 2010, p. 1495-1508.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  384. Published

    An alternative treatment of phenomenological higher-order strain-gradient plasticity theory. / Kuroda, Mitsutoshi; Tvergaard, Viggo.

    In: International Journal of Plasticity, Vol. 26, No. 4, 2010, p. 507-515.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  385. Published

    Analytical predictions for vibration phase shifts along fluid-conveying pipes due to Coriolis forces and imperfections. / Thomsen, Jon Juel; Dahl, Jonas.

    In: Journal of Sound and Vibration, Vol. 329, No. 15, 2010, p. 3065-3081.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  386. Published

    An explicit parametrization for casting constraints in gradient driven topology optimization. / Gersborg, Allan Roulund; Andreasen, Casper Schousboe.

    Kgs.Lyngby : Technical University of Denmark, Danish Center for Applied Mathematics and Mechanics, 2010. 10 p. (DCAMM report; No. 745).

    Publication: ResearchReport – Annual report year: 2010

  387. Published

    Application of a new wear model in hydrodynamic metal-polymer bearings. / Thomsen, Kim (Invited author); Klit, Peder (Invited author).

    9. EDF/Pprime (LMS) Poitiers Workshop: “Improvement of Bearing Performance and Evaluation of Adverse Conditions”. 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  388. Published

    A topology optimization method for design of negative permeability metamaterials. / Diaz, A. R.; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 41, No. 2, 2010, p. 163-177.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  389. Published

    Constraints on reusability of learning objects : Didactic aspects of modular e-Learning in engineering education. / May, Michael; Hussmann, Peter Munkebo; Jensen, Anne Skov; Rootzen, Helle; Markvorsen, Steen; Schmidt, Karsten; Skårhøj, Kasper; Enemark, Søren.

    CSEDU 2010 - 2nd International Conference on Computer Supported Education, Proceedings. Vol. 2 2010. p. 325-332.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  390. Published

    Continuation Guided Experiments. / Schilder, Frank (Author); Bureau, Emil (Author); Starke, Jens (Author); Dankowicz, Harry (Author); Sieber, Jan (Author).

    2010. BrainModes 2010, DTU, Kgs. Lyngby, 01/01/10.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2010

  391. Published

    Continuum modeling of size-effects in single crystals. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of NSCM-23. 2010. p. 126-129.

    Publication: ResearchArticle in proceedings – Annual report year: 2010

  392. Published

    Controllable Elastohydrodynamics With Examples. / Santos, Ilmar; Haugaard, Martin Asger.

    2010. Abstract from Society of Tribologists and Lubrication Engineers : Annual Meeting & Exhibition, Las Vegas, USA, .

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2010

  393. Published

    Debonding failure and size effects in micro reinforced composites. / Legarth, Brian Nyvang; Niordson, Christian Frithiof.

    In: International Journal of Plasticity, Vol. 26, No. 1, 2010, p. 149-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  394. Published

    Debonding Failure in Composites. / Legarth, Brian Nyvang (Invited author); Didriksen, Claus (Invited author); Richelsen, Ann Bettina (Invited author).

    NAFEMS Nordic Seminar: Simulating Composite Materials and Structures. 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  395. Published

    Design of photonic bandgap fibers by topology optimization. / Dühring, Maria Bayard; Sigmund, Ole; Feurer, Thomas.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 27, No. 1, 2010, p. 51-58.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  396. Published
  397. Published

    Ductile shear failure or plug failure of spot welds modelled by modified Gurson model. / Nielsen, Kim Lau; Tvergaard, Viggo.

    In: Engineering Fracture Mechanics, Vol. 77, 2010, p. 1031-1047.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  398. E-pub ahead of print

    Effect of asymmetric actuator and detector position on Coriolis flowmeter and measured phase shift. / Enz, Stephanie.

    In: Flow Measurement and Instrumentation, 2010.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  399. Published

    Effect of pure mode I, II or III loading or mode mixity on crack growth in a homogeneous solid. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 47, No. 11-12, 2010, p. 1611-1617.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  400. Published

    Efficient computational procedures for topology optimization of nonlinear structures. / Amir, Oded; Stolpe, Mathias; Sigmund, Ole.

    2010. Abstract from 4th European Conference on Computational Mechanics, Paris, France.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2010

  401. Published

    Elastohydrodynamics Applied to Active Tilting-Pad Journal Bearings. / Haugaard, Martin Asger; Santos, Ilmar.

    In: Journal of Tribology, Vol. 132, No. 2, 2010, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  402. Published

    Experimental Detection and Quantification of Structural Nonlinearity Using Homogeneity and Hilbert Transform Methods. / Kragh, Knud Abildgaard; Thomsen, Jon Juel; Tcherniak, Dmitri.

    Proceedings of ISMA2010-USD2010. 2010.

    Publication: ResearchArticle in proceedings – Annual report year: 2010

  403. Published

    Extreme non-linear elasticity and transformation optics. / Gersborg, Allan Roulund; Sigmund, Ole.

    In: Optics Express, Vol. 18, No. 18, 2010, p. 19020-19031.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  404. Published

    Fast Solution of Fluid-Structure Interaction Problem in the Frequency Domain With an Application. / Haugaard, Martin Asger; Santos, Ilmar.

    PACAM XI. 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  405. Published

    Flutter-based Wind Energy Harvesting. / Sønderby, Ivan Bergquist; Hansen, Morten Hartvig; Thomsen, Jon Juel.

    Torque 2010: The science of making torque from wind. European Wind Energy Association (EWEA), 2010. p. 839-849.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  406. Published

    High-frequency effects in 1D spring-mass systems with strongly non-linear inclusions. / Lazarov, Boyan Stefanov; Snaeland, S.O.; Thomsen, Jon Juel.

    Dynamics and Control of Hybrid Dynamical Systems. ed. / Gennady Leonov; Henk Nijmeijer; Alexander Pogromsky; Alexander Fradkov. World Scientific Publishing Co Pte Ltd, 2010. p. 223-242.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2010

  407. Published

    Improving bending stress in spur gears using asymmetric gears and shape optimization. / Pedersen, Niels Leergaard.

    In: Mechanism and Machine Theory, Vol. 45, No. 11, 2010, p. 1707-1720.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  408. Published

    Investigation of piston ring – cylinder liner dry wear using a block-on-ring test rig. / Bihlet, Uffe; Klit, Peder; Felter, Christian L.; Vølund, Anders .

    2010. Paper presented at NORDTRIB 2010, Storforsen, Sweden.

    Publication: ResearchPaper – Annual report year: 2010

  409. Published
  410. Published

    Isogeometric Analysis Towards Shape Optimization in Electromagnetics. / Nguyen, Dang Manh (Invited author); Evgrafov, Anton (Invited author); Gravesen, Jens (Invited author); Jensen, Jakob Søndergaard (Invited author).

    Prooceedings of NSCM-23, the 23rd Nordic Seminar on Computational Mechanics. Stockholm, 2010. p. 18-21.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  411. Published

    Mechatronics Applied to Machine Elements with Focus on Active Control of Bearing, Shaft and Blade Dynamics. / Santos, Ilmar.

    DTU Mechanical Engineering, 2010. 536 p.

    Publication: ResearchDoctoral thesis – Annual report year: 2010

  412. Published

    Micro-mechanical modelling of ductile failure in 6005A aluminium using a physics based strain hardening larw including stage IV. / Simar, Aude; Nielsen, Kim Lau; de Meester, Bruno; Tvergaard, Viggo; Pardoen, Thomas.

    In: Engineering Fracture Mechanics, Vol. 77, No. 13, 2010, p. 2491-2503.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  413. Published

    Modelling of plastic flow localization and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law. / Nielsen, Kim Lau; Pardoen, Thomas; Tvergaard, Viggo; de Meester, Bruno; Simar, Aude.

    In: International Journal of Solids and Structures, Vol. 47, No. 18-19, 2010, p. 2359-2370.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  414. Published

    Motions of elastic solids in fluids under vibration. / Sorokin, V. S.; Blekhman, I. I.; Thomsen, Jon Juel.

    In: Nonlinear Dynamics, Vol. 60, No. 4, 2010, p. 639-650.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  415. Published

    Multi-orifice active tilting-pad journal bearings—Harnessing of synergetic coupling effects. / Haugaard, Martin Asger; Santos, Ilmar.

    In: Tribology International, Vol. 43, 2010, p. 1374-1391.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  416. Published

    On the future of controllable fluid film bearings. / Santos, Ilmar.

    Proceedings of the 9th EDF/Pprime (LMS) Poitiers Workshop: Improvement of Bearing Performance and Evaluation of Adverse Conditions. 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  417. Published

    On The Modeling Of Hybrid Aerostatic - Gas Journal Bearings. / Morosi, Stefano (Invited author); Santos, Ilmar (Invited author).

    2010 STLE Annual Meeting & Exhibition. Vol. Track: Fluid film bearings 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  418. Published

    On The Modeling Of Hybrid Aerostatic - Gas Journal Bearings. / Morosi, Stefano (Invited author); Santos, Ilmar (Invited author).

    Proceedings of NORDTRIB 2010. 2010.

    Publication: ResearchArticle in proceedings – Annual report year: 2010

  419. Published

    On the stability analysis of flexible rotors supported by Hybrid Aerostatic - Gas Journal Bearings. / Morosi, Stefano; Santos, Ilmar.

    2010. Abstract from International Joint Tribology Conference, San Francisco, USA, .

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2010

  420. Published
  421. Published

    Optimization of keyway design. / Pedersen, Niels Leergaard.

    Proceedings of the 2nd international conference on engineering optimization(+CD-rom). Lisbon, Portugal, 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  422. Published

    Optimization of space-time material layout for 1D wave propagation with varying mass and stiffness parameters. / Jensen, Jakob Søndergaard.

    In: CONTROL AND CYBERNETICS, Vol. 39, No. 3, 2010, p. 599-614.

    Publication: Research - peer-reviewConference article – Annual report year: 2010

  423. Published

    Optimization of the pressure coupling coefficient in periodic poroelastic materials. / Andreasen, Casper Schousboe (Invited author); Sigmund, Ole (Invited author).

    ECCM 2010. European Community on Computational Methods in Applied Sciences, 2010. p. 757.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  424. Published

    Predicting failure response of spot welded joints using recent extensions to the Gurson model. / Nielsen, Kim Lau.

    In: Computational Materials Science, Vol. 48, No. 1, 2010, p. 71-82.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  425. Published

    Relations between a micro-mechanical model and a damage model for ductile failure in shear. / Tvergaard, Viggo; Nielsen, Kim Lau.

    In: Journal of the Mechanics and Physics of Solids, Vol. 58, 2010, p. 1243-1252.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  426. Published

    Stability Analysis of Flexible Rotors Supported by Hybrid Permanent Magnet - Gas Bearings. / Morosi, Stefano; Santos, Ilmar.

    PACAM XI - 11th Pan-American Congress of Applied Mechanics. 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  427. Published

    Stability of multi orifice active tilting-pad journal bearings. / Haugaard, Asger M.; Santos, Ilmar.

    In: Tribology International, Vol. 43, No. 9, 2010, p. 1742-1750.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  428. Published

    Strain gradient effects on cyclic plasticity. / Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: Journal of the Mechanics and Physics of Solids, Vol. 58, No. 4, 2010, p. 542-557.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  429. Published

    Strain hardening and damage in 6xxx series aluminum alloy friction stir welds. / Simar, Aude; Nielsen, Kim Lau; de Meester, Bruno; Pardoen, Thomas; Tvergaard, Viggo.

    In: Materials Science Forum, Vol. 638-642, 2010, p. 333-338.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  430. Published

    Strength optimized designs of thermoelastic structures. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 42, No. 5, 2010, p. 681-691.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  431. Published

    Stress concentration and design of spline shaft. / Pedersen, Niels Leergaard.

    Proceedings of NSCM-23. Stockholm : KTH Mechanics, 2010. p. 302-305.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  432. Published

    Stress concentrations in keyways and optimization of keyway design. / Pedersen, Niels Leergaard.

    In: Journal of Strain Analysis for Engineering Design, Vol. 45, No. 8, 2010, p. 593-604.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  433. Published

    Stress Concentrations in Keyways and Optimization of Keyway design. / Pedersen, Niels Leergaard.

    Kgs. Lyngby, Denmark : Technical University of Denmark, 2010. 18 p. (DCAMM reports; No. 743).

    Publication: Research - peer-reviewReport – Annual report year: 2010

  434. Published
  435. Published

    Testbed of a novel robotic pitch-roll wrist parameter identification. / Ma, Xiao Qing; Chopra, Vikram; Angeles, Jorge; Haugaard, Martin Asger.

    In: ASME Conference Proceedings, Vol. 7, No. Part B, 2010, p. 681-688.

    Publication: Research - peer-reviewConference article – Annual report year: 2010

  436. Published

    Three Types of Active Lubrication Systems for the Main Bearings of Reciprocating Machines. / Santos, Ilmar; Pulido, E. E.

    2010 STLE Annual Mweeting & Exhibition: Society of Tribologists and Lubrication Engineers.. 2010.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2010

  437. Published

    Time-Domain Topology Optimization of Pulse-Shaping Filters. / Yang, Lirong; Sigmund, Ole; Lavrinenko, Andrei; Hvam, Jørn Märcher.

    OWTNM. 2010.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2010

  438. Published

    Topology optimization for transient response of photonic crystal structures. / Matzen, René; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 27, No. 10, 2010, p. 2040-2050.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  439. Published

    Topology optimization of grating couplers for the efficient excitation of surface plasmons. / Andkjær, Jacob Anders; Sigmund, Ole; Nishiwaki, Shinji; Nomura, Tsuyoshi.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 27, No. 9, 2010, p. 1828-1832.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  440. Published

    Topology optimization of metallic devices for microwave applications. / Aage, Niels; Mortensen, Asger; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 83, No. 2, 2010, p. 228-248.

    Publication: Research - peer-reviewJournal article – Annual report year: 2010

  441. Published

    Topology-optimized slow-light couplers for ring-shaped photonic crystal waveguide. / Pu, Minhao; Yang, Lirong; Frandsen, L. H.; Jensen, Jakob Søndergaard; Sigmund, Ole; Ou, Haiyan; Yvind, Kresten; Hvam, Jørn Märcher.

    2010 Conference on (OFC/NFOEC) Optical Fiber Communication (OFC), collocated National Fiber Optic Engineers Conference. IEEE, 2010. p. 1-3.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  442. Published

    Uniform energy density as a design objective for forced support displacements. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Proceedings of the 2nd international conference on engineering optimization(+CD-rom). Lisbon, Portugal : APMTAC - Portugese Association for Theoretical, Applied and Computational Mechanics, Laboratorio Nacional de Egenharia Civil, Av. do Brasil, 101, 1700-066 Lisboa, 2010.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  443. 2009
  444. Published

    Optimization of acoustic, optical and optoelastic devices. / Dühring, Maria Bayard; Sigmund, Ole (Supervisor); Jensen, Jakob Søndergaard (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2009. 164 p. (DCAMM Special Report; No. S109).

    Publication: ResearchPh.D. thesis – Annual report year: 2009

  445. Published

    Active lubrication applied to internal combustion engines - evaluation of control strategies. / Estupinan, Edgar Alberto; Santos, Ilmar.

    Proceedings of The Sixtheenth International Congress on Sound and Vibration. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  446. Published

    Active lubrication strategies applied to dynamically loaded fluid film bearings. / Estupinan, Edgar Alberto; Santos, Ilmar.

    Proceedngs of the World Tribology Conference 2009. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  447. Published

    Analyses of crack growth along interface of patterned wafer-level Cu-Cu bonds. / Tvergaard, Viggo; Hutchinson, John W.

    In: International Journal of Solids and Structures, Vol. 46, No. 18-19, 2009, p. 3433-3440.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  448. Published

    Analytical optimal designs for long and short statically determinate beam structures. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 39, No. 4, 2009, p. 343-357.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  449. Published

    Application of Active Lubrication Techniques to Different Types of Journal Bearings. / Santos, Ilmar.

    SIRM 2009 - VIII International Conference on Vibrations in Rotating Machines. Vienna : Technical University of Vienna, 2009. p. 1-11.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  450. Published

    Approximate Reanalysis in Topology Optimization. / Amir, Oded; Bendsøe, Martin P.; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 78, No. 12, 2009, p. 1474-1491.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  451. Published

    Assessment of the applicability of the weight vector theory for Coriolis flowmeters. / Enz, Stephanie.

    Proceedings of the IMEKO XIX World Congress. 2009. p. 1-4.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  452. Published

    Behaviour of voids in a shear field. / Tvergaard, Viggo.

    In: International Journal of Fracture, Vol. 158, No. 1, 2009, p. 41-49.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  453. Published

    Bolt-Plate Contact Assemblies with Prestress and External Loads. / Pedersen, Niels Leergaard; Pedersen, Pauli.

    Kgs. Lyngby, Denmark, 2009. 20 p. (DCAMM reports; No. 740).

    Publication: Research - peer-reviewReport – Annual report year: 2009

  454. Published

    Bolt-plate contact assemblies with prestress and external loads: Solved with super element technique. / Pedersen, Niels Leergaard; Pedersen, Pauli.

    In: Computers & Structures, Vol. 87, No. 21-22, 2009, p. 1374-1383.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  455. Published

    Debonding analyses of closely spaced Z-pins bridging an unbonded interface. / Legarth, Brian Nyvang.

    In: Materials & Design, Vol. 30, No. 9, 2009, p. 3743-3751.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  456. Published

    Design of acousto-optical devices by topology optimization. / Dühring, Maria Bayard.

    Proceedings of WCSMO-8, 8th World Congress on Structural and Multidisciplinary Optimization. 2009.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  457. Published

    Design of one-dimensional optical pulse-shaping filters by time-domain topology optimization. / Yang, Lirong; Lavrinenko, Andrei; Hvam, Jørn Märcher; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 95, No. 26, 2009, p. 261101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  458. Published

    Development and verification of a reciprocating test rig designed for investigation of piston ring tribology. / Pedersen, Michael Torben; Imran, Tajammal; Klit, Peder.

    Development and verification of a reciprocating test rig designed for investigation of piston ring tribology. 2009.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  459. Published

    Effect of a shear modified Gurson model on damage development in a FSW tensile specimen. / Nielsen, Kim Lau; Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 46, No. 3-4, 2009, p. 587-601.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  460. Published

    Effects of microscopic boundary conditions on plastic deformations of small-sized single crystals. / Kuroda, Mitsutoshi; Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 46, No. 25-26, 2009, p. 4396-4408.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  461. Published

    Efficient use of iterative solvers in nested topology optimization. / Amir, Oded; Stolpe, Mathias; Sigmund, Ole.

    Eighth World Congress on Structural and Multidisciplinary Optimization. 2009.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  462. Published

    Energy storage and dispersion of surface acoustic waves trapped in a periodic array of mechanical resonators. / Dühring, Maria Bayard; Laude, Vincent; Khelif, Abdelkrim.

    In: Journal of Applied Physics, Vol. 105, No. 9, 2009, p. 093504.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  463. Published

    Estimation of piezoelastic and viscoelastic properties in laminated structures. / Araujo, A. L.; Soares, C. M. Mota; Herskovits, J.; Pedersen, Pauli.

    In: Composite Structures, Vol. 87, No. 2, 2009, p. 168-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  464. Published

    Feasibility of Applying Active Lubrication to Dynamically Loaded Fluid Film Bearings. / Estupinan, Edgar Alberto; Santos, Ilmar.

    Proceedings of the 64th STLE Annual Meeting and Exhibition. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  465. Published

    Feasibility of Applying Controllable Lubrication Techniques to Reciprocating Machines. / Pulido, Edgar Estupinan; Santos, Ilmar (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2009. 160 p. (DCAMM Special Repport; No. S111).

    Publication: ResearchPh.D. thesis – Annual report year: 2009

  466. Published

    Feasibility of Applying Controllable Lubrication to Dynamically Loaded Journal Bearings. / Estupinan, Edgar Alberto; Santos, Ilmar.

    Proceedings of the XIII International Symposium on Dynamic Problems of Mechanics. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  467. Published

    Improving acousto-optical interaction by high aspect ratio electrodes. / Dühring, Maria Bayard (Invited author).

    2009. Abstract from DCAMM 12th International symposium, Sørup Herregård, Ringsted, Denmark, .

    Publication: ResearchConference abstract for conference – Annual report year: 2009

  468. Published

    Improving surface acousto-optical interaction by high aspect ratio electrodes. / Dühring, Maria Bayard; Laude, Vincent; Khelif, Abdelkrim.

    In: Journal of Applied Physics, Vol. 106, No. 11, 2009, p. 113518.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  469. Published

    Improving the acousto-optical interaction in a Mach-Zehnder interferometer. / Dühring, Maria Bayard; Sigmund, Ole.

    In: Journal of Applied Physics, Vol. 105, No. 8, 2009, p. 083529.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  470. Published

    Iso-geometric Analysis and Shape Optimization in Mechanics. / Nielsen, Peter Nørtoft; Gersborg, Allan Roulund; Gravesen, Jens.

    2009. Poster session presented at PLATO-N International Workshop on Advances in Topology and Material Optimization - Methods and Industrial Applications, Lyngby, Denmark.

    Publication: ResearchPoster – Annual report year: 2009

  471. Published

    Isogeometric Analysis in Structural Analysis. / Nguyen, Dang Manh; Evgrafov, Anton; Gersborg, Allan Roulund; Gravesen, Jens.

    2009. Poster session presented at DCAMM 12th Internal Symposium, Ringsted, Denmark.

    Publication: Research - peer-reviewPoster – Annual report year: 2009

  472. Published

    Iso-geometric Analysis in Structural Vibrations. / Nielsen, Peter Nørtoft; Gersborg, Allan Roulund; Gravesen, Jens.

    2009. Poster session presented at DCAMM 12th Internal Symposium, Ringsted, Denmark.

    Publication: ResearchPoster – Annual report year: 2009

  473. Published

    Isogeometric Design of Vibrating Membranes. / Nguyen, Dang Manh; Evgrafov, Anton; Gersborg, Allan Roulund; Gravesen, Jens.

    2009. Poster session presented at Plato-N: Advances in Topology and Material Optimization - Methods and Industrial Applications, .

    Publication: Research - peer-reviewPoster – Annual report year: 2009

  474. Published

    Linking rigid multibody systems via controllable thin fluid films. / Estupinan, Edgar Alberto; Santos, Ilmar.

    In: Tribology International, Vol. 42, No. 10, 2009, p. 1478-1486.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  475. Published

    Machine Elements : Analysis and Design. / Klit, Peder; Casper, Knud; Pedersen, Niels Leergaard.

    Kgs. Lyngby, Denmark : Polyteknisk Forlag, 2009. 264 p.

    Publication: EducationBook – Annual report year: 2009

  476. Published

    Manufacturing tolerant topology optimization. / Sigmund, Ole.

    In: Acta Mechanica Sinica, Vol. 25, No. 2, 2009, p. 227-239.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  477. Published

    Maximizing opto-elastic interaction using topology optimization. / Gersborg, Allan Roulund (Author); Sigmund, Ole (Author).

    2009. International Conference on Conference for Coupled Problems in Science and Engineering : Coupled Problems, Ischia, Italy, 01/01/09.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2009

  478. Published

    Mechatronics Applied to Elastohydrodynamics. / Santos, Ilmar; Haugaard, Martin Asger.

    STLE Annual Meeting and Exhibition, STLE (Society of Tribologists and Lubrication Engineers).. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  479. Published

    Modeling of Hybrid Permanent Magnetic-Gas Bearings. / Morosi, Stefano; Santos, Ilmar.

    COBEM 2009 - 20th International Congress of Mechanical Engineering, ABCM,. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  480. Published

    Modelling and Simulation of the Testbed for a Pitch-Roll Wrist Prototype Based on Spherical Cam-Rollers. / Ma, Xiao Qing; Chopra, Vikram; Angeles, Jorge; Haugaard, Martin Asger.

    2009 CCToMM M³ Symposium. Canadian Committee for the Theory of Machines and Mechanisms, 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  481. Published
  482. Published

    Novel Tribotester for Cylinder Liner/Piston Ring Contacts of Two Stroke Marine Diesel Engines. / Pedersen, Michael Torben; Imran, Tajammal; Klit, Peder; Felter, Christian; Vølund, Anders.

    BALTTRIB' 2009: V INTERNATIONAL CONFERENCE, PROCEEDINGS. LITHUANIAN UNIV AGRICULTURE, 2009. p. 131-139.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  483. Published

    On the application of optimality criteria for compliance with forced support displacements. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    WCSMO-8 Eighth World Congress on Structural and Multidisciplinary Optimization: Book of abstracts and CD-rom proceedings. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  484. Published

    On the effects of strain gradient plasticity during cyclic loading. / Niordson, Christian Frithiof (Invited author); Legarth, Brian Nyvang (Invited author).

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture. 2009. p. 346-348.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  485. Published

    On The Experimental Identification of Active Lubricated Bearings Parameters. / Santos, Ilmar.

    STLE Annual Meeting and Exhibition, STLE - Society of Tribologists and Lubrication Engineers. Orlando, USA : STLE - Society of Tribologists and Lubrication Engineers, 2009. p. 1-3.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  486. Published

    Optimality criteria based on Timoshenko beam theory. / Pedersen, Niels Leergaard; Pedersen, Pauli.

    WCSMO-8 Eighth World Congress on Structural and Multidisciplinary Optimization: Book of abstracts and CD-rom proceedings. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  487. Published

    Optimization of piezoelectric bimorph actuators with active damping for static and dynamic loads. / Donoso, Alberto; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 38, No. 2, 2009, p. 171-183.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  488. Published

    PDE-interpolations in topology optimization. / Sigmund, Ole (Invited author).

    Proceedings of the Twenty Second Nordic Seminar on Computaional Mechanics: DCE Technical Memorandum. ed. / Lars Damkilde et al.Vol. 11 Aalborg University, 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  489. Published

    Phase shift effects for vibrating pipes conveying pulsating fluid. / Enz, Stephanie; Thomsen, Jon Juel.

    Proceedings of the 7th EUROMECH Solid Mechanics Conference (ESMC2009). 2009. p. 251.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  490. Published

    Predicting phase shift of elastic waves in pipes due to fluid flow and imperfections. / Thomsen, Jon Juel (Invited author); Dahl, Jonas (Invited author); Fuglede, Niels (Invited author); Enz, Stephanie (Invited author).

    Proceedings of the 16th International Congress on Sound and Vibration (ICSV16): (CD-ROM proceedings). Kraków, Poland : International Institute of Sound and Vibration, 2009. p. 1-8.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  491. Published
  492. Published

    Ranking of Cylinder Liner Materials in Two Stroke Marine Diesel Engines. / Pedersen, Michael Torben; Imran, Tajammal; Klit, Peder; Felter, Christian; Vølund, Anders.

    Proceedings of the International Conference BALTTRIB’2009. 2009.

    Publication: ResearchArticle in proceedings – Annual report year: 2009

  493. Published

    Reducing bending stress in external spur gears by redesign of the standard cutting tool. / Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 38, No. 3, 2009, p. 215-227.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  494. Published

    Resonant Excitation of a Truncated Metamaterial Cylindrical Shell by a Thin Wire Monopole. / Kim, Oleksiy S.; Erentok, Aycan; Breinbjerg, Olav.

    3rd European Conference on Antennas and Propagation, 2009. EuCAP 2009. Berlin, Germany : IEEE, 2009. p. 3155-3157.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  495. Published

    Schemes for applying active lubrication to main engine bearings. / Estupinan, Edgar Alberto; Santos, Ilmar.

    Proceedings of the 11th Pan-American Congress of Applied Mechanics. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2010

  496. Published

    Sensitivity Filters In Topology Optimisation As A Solution To Helmholtz Type Differential Equation. / Lazarov, Boyan Stefanov; Sigmund, Ole.

    WCSMO-8 8th World Congress on Structural and Multidisciplinary Optimization - 8, 2009, LNEC, Lisbon, Portugal. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  497. Published

    Shape optimization of asymmetric gears. / Pedersen, Niels Leergaard (Invited author).

    Proceedings of the twenty second nordic seminar on computational mechanics. Vol. DCE technical memorandum no. 11 Aalborg, 2009. p. 313-320.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  498. Published

    Space-time topology optimization for one-dimensional wave propagation. / Jensen, Jakob Søndergaard.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 198, No. 5-8, 2009, p. 705-715.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  499. Published

    Strain gradient effects in composites. / Legarth, Brian Nyvang (Invited author); Niordson, Christian Frithiof (Invited author).

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture. 2009. p. 340-342.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  500. Published

    Structures and continua with uniform energy densities. / Pedersen, Pauli (Invited author).

    Proceedings of the twenty second nordic seminar on computational mechanics. Vol. DCE technical memorandum no. 11 Aalborg, 2009. p. 303-311.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  501. Published

    Systematic design of metamaterials by topology optimization. / Sigmund, Ole (Invited author).

    Symposium on Modelling Nanomaterials and Nanosystems: IUTAM Bookseries. ed. / R Pyrz; J C Rauhe. Springer, 2009. p. 151-160.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  502. Published

    Topological material layout in plates for vibration suppression and wave propagation control. / Larsen, Anders Astrup; Laksafoss, B.; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 37, No. 6, 2009, p. 585-594.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  503. Published

    Topology optimization of a reversible crash protection using fluid – structure interaction. / Andreasen, Casper Schousboe.

    Eighth World Congress on Structural and Multidisciplinary Optimization: Book of Abstracts. 2009.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2009

  504. Published

    Topology optimization of devices for wireless energy transfer : The design parametrization. / Aage, Niels; Mortensen, Asger; Sigmund, Ole.

    8th World Congress on Structural and Multidisciplinary Optimization. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  505. Published

    Topology Optimization of Metallic Microwave Devices. / Aage, Niels; Sigmund, Ole.

    Advances in Topology and Material Optimization: Methods and Industrial Applications. 2009.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2009

  506. Published

    Topology optimization of microfluidic mixers. / Andreasen, Casper Schousboe; Gersborg, Allan Roulund; Sigmund, Ole.

    In: International Journal for Numerical Methods in Fluids, Vol. 61, No. 5, 2009, p. 498-513.

    Publication: Research - peer-reviewJournal article – Annual report year: 2009

  507. Published

    Tribological Performance of Different Geometries of Piston Rings in Marine Diesel Engines. / Imran, Tajammal; Klit, Peder; Felter, Christian; Vølund, Anders.

    2009. Abstract from Leeds-Lyon Conference in Tribology 2009, Lyon, France, .

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2009

Previous 1 2 3 Next
Download list: To download, please limit the number of search results to 1,000 or less.