1. 2016
  2. Published

    Active lubrication applied to radial gas journal bearings. Part 2: Modelling improvement and experimental validation. / Pierart, Fabián G.; Santos, Ilmar F.

    In: Tribology International, Vol. 96, 2016, p. 237–246.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  3. E-pub ahead of print
  4. Published

    A practical multiscale approach for optimization of structural damping. / Andreassen, Erik; Jensen, Jakob Søndergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 53, No. 2, 2016, p. 215-224.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  5. Published

    Bayesian inference model for fatigue life of laminated composites. / Dimitrov, Nikolay Krasimirov; Kiureghian, Armen Der; Berggreen, Christian.

    In: Journal of Composite Materials, Vol. 50, No. 2, 2016, p. 131-143.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  6. Published

    Damping of Torsional Beam Vibrations by Control of Warping Displacement. / Høgsberg, Jan Becker; Hoffmeyer, David; Ejlersen, Christian.

    In: Journal of Vibration and Acoustics, Vol. 138, 014501, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  7. Accepted/In press
  8. Published

    Editorial. / Audoly, Basile; Castañeda, Pedro Ponte; Kuhl, Ellen; Niordson, Christian; Sharma, Pradeep; Gao, Huajian.

    In: Journal of the Mechanics and Physics of Solids, Vol. 87, 2016, p. iii.

    Publication: Research - peer-reviewEditorial – Annual report year: 2016

  9. Published
  10. Published

    Effects produced by oscillations applied to nonlinear dynamic systems: a general approach and examples. / Blekhman, I. I.; Sorokin, V. S.

    In: Nonlinear Dynamics, Vol. 83, No. 4, 2016, p. 2125-2141.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  11. E-pub ahead of print
  12. E-pub ahead of print
  13. Published

    Hybrid viscous damper with filtered integral force feedback control. / Høgsberg, Jan ; Brodersen, Mark L.

    In: Journal of Vibration and Control, Vol. 22, No. 6, 2016, p. 1645-1656.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  14. Accepted/In press
  15. E-pub ahead of print

    Indentation of pressurized viscoplastic polymer spherical shells. / Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  16. Accepted/In press
  17. Published

    Inertial amplification of continuous structures: Large band gaps from small masses. / Frandsen, Niels Morten Marslev; Bilal, Osama R.; Jensen, Jakob Søndergaard; Hussein, Mahmoud I.

    In: Journal of Applied Physics, Vol. 119, No. 12, 124902, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  18. Accepted/In press

    Investigation of Different Piston Ring Curvatures on Lubricant Transport along Cylinder Liner in Large Two-Stroke Marine Diesel Engines. / Overgaard, Hannibal Christian; Klit, Peder; Vølund, Anders.

    Proceedings of The 17th Nordic Symposium on Tribology.. 2016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  19. Published

    Kinematic and dynamic modeling and approximate analysis of a roller chain drive. / Fuglede, Niels; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 366, 2016, p. 447-470.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  20. Published

    Kinematics of roller chain drives - Exact and approximate analysis. / Fuglede, Niels; Thomsen, Jon Juel.

    In: Mechanism and Machine Theory, Vol. 100, 2016, p. 17-32.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  21. Published
  22. Published

    On fracture in finite strain gradient plasticity. / Martínez-Pañeda, E.; Niordson, Christian Frithiof.

    In: International Journal of Plasticity, Vol. 80, 2016, p. 154-167.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  23. Published

    On modeling micro-structural evolution using a higher order strain gradient continuum theory. / El-Naaman, S. A.; Nielsen, K. L.; Niordson, C. F. .

    In: International Journal of Plasticity, Vol. 76, 2016, p. 285-298.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  24. Published

    On nanostructured silicon success. / Sigmund, Ole; Jensen, Jakob Søndergaard; Frandsen, Lars Hagedorn.

    In: Nature Photonics, Vol. 10, No. 3, 2016, p. 142-143.

    Publication: Research - peer-reviewLetter – Annual report year: 2016

  25. E-pub ahead of print

    On optimization of interference fit assembly. / Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  26. E-pub ahead of print

    On the implementation and effectiveness of morphological close-open and open-close filters for topology optimization. / Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  27. E-pub ahead of print

    On the (non-)optimality of Michell structures. / Sigmund, Ole; Aage, Niels; Andreassen, Erik.

    In: Structural and Multidisciplinary Optimization, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  28. Published

    Optimization of hardening/softening behavior of plane frame structures using nonlinear normal modes. / Dou, Suguang; Jensen, Jakob Søndergaard.

    In: Computers & Structures, Vol. 164, 2016, p. 63-74.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  29. Published

    Resonant passive–active vibration absorber with integrated force feedback control. / Høgsberg, Jan Becker; Brodersen, Mark Laier; Krenk, Steen.

    In: Smart Materials and Structures, Vol. 25, No. 4, 047001, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  30. Published

    Rolling at small scales. / Nielsen, Kim L.; Niordson, Christian F.; Hutchinson, John W.

    In: Journal of Manufacturing Science and Engineering, Vol. 138, No. 4, 041004, 2016.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  31. Published
  32. Published

    Topology optimization of piezo modal transducers with null-polarity phases. / Donoso, A.; Sigmund, O.

    In: Structural and Multidisciplinary Optimization, Vol. 53, No. 2, 2016, p. 193-203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  33. Published

    Topology optimization of unsteady flow problems using the lattice Boltzmann method. / Nørgaard, Sebastian Arlund; Sigmund, Ole; Lazarov, Boyan Stefanov.

    In: Journal of Computational Physics, Vol. 307, 2016, p. 291-307.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  34. Published
  35. Published

    Vibration control of a flexible structure with electromagnetic actuators. / Gruzman, Maurício; Santos, Ilmar.

    In: Brazilian Society of Mechanical Sciences and Engineering. Journal, Vol. 38, No. 4, 2016, p. 1131-1142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  36. 2015
  37. Published

    3D interactive topology optimization on hand-held devices. / Nobel-Jørgensen, Morten; Aage, Niels; Christiansen, Asger Nyman; Igarashi, Takeo; Bærentzen, Jakob Andreas; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 51, No. 6, 2015, p. 1385-1391.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. E-pub ahead of print
  39. Published

    Actuator topology design using the controllability Gramian. / Alves da Silveira, Otávio Augusto; Ono Fonseca, Jun Sérgio; Santos, Ilmar.

    In: Structural and Multidisciplinary Optimization, Vol. 51, 2015, p. 145-157.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  40. Published

    Analyzing the use of pins in safety bearings. / da Fonseca, Cesar A. L. L.; Weber, Hans I.; Fleischer, Philip F.; Santos, Ilmar.

    In: Brazilian Society of Mechanical Sciences and Engineering. Journal, Vol. 37, No. 4, 2015, p. 1425-1434.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  41. Published

    Anchoring FRP Composite Armor in Flexible Offshore Riser Systems. / Costache, Andrei; Berggreen, Christian (Supervisor); Glejbøl, Kristian (Supervisor); Sivebæk, Ion Marius (Supervisor).

    Kgs. Lyngby : DTU Mechanical Engineering, 2015. 134 p. (DCAMM Special Report; No. S194).

    Publication: ResearchPh.D. thesis – Annual report year: 2016

  42. Published

    An unconstrained integral approximation of large sliding frictional contact between deformable solids. / Poulios, Konstantinos; Renard, Yves.

    In: Computers & Structures, Vol. 153, 2015, p. 75-90.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  43. Published

    Balanced calibration of resonant piezoelectric RL shunts with quasi-static background flexibility correction. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Journal of Sound and Vibration, Vol. 341, 2015, p. 16-30.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  44. Published

    Beam section stiffness properties using a single layer of 3D solid elements. / Couturier, Philippe; Krenk, Steen; Høgsberg, Jan Becker.

    In: Computers and Structures, Vol. 156, 2015, p. 122-133.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  45. Published

    Behaviour of porous ductile solids at low stress triaxiality in different modes of deformation. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 60-61, 2015, p. 28–34.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  46. Published
  47. Published
  48. Published

    Combined Shape and Topology Optimization. / Christiansen, Asger Nyman; Bærentzen, Jakob Andreas (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby : Technical University of Denmark (DTU), 2015. 115 p. (DTU Compute PHD-2014; No. 350).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  49. Published

    Combined shape and topology optimization of 3D structures. / Christiansen, Asger Nyman; Bærentzen, Jakob Andreas; Nobel-Jørgensen, Morten; Aage, Niels; Sigmund, Ole.

    In: Computers & Graphics, Vol. 46, 2015, p. 25-35.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  50. Published

    Composite Beam Cross-Section Analysis by a Single High-Order Element Layer. / Couturier, Philippe; Krenk, Steen.

    Proceedings of 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics & Astronautics, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  51. Published

    Computer Analysis and Optimal Design of Mechine Elemennts. / Pedersen, Niels Leergaard.

    Proceedings of the NSCM28. ed. / Arkadi Berezovski; Kert Tamm; Tanel Peets. Institute of Cybernetics at Tallinn University of Technology, 2015. p. 21-24.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  52. Published

    Conservative fourth-order time integration of non-linear dynamic systems. / Krenk, Steen.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 295, 2015, p. 39-55.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  53. Published

    Convolutional Neural Networks for SAR Image Segmentation. / Malmgren-Hansen, David; Nobel-Jørgensen, Morten.

    Proceedings of IEEE International Symposium on Signal Processing and Information Technology (ISSPIT 2015). IEEE, 2015. p. 231 - 236.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2016

  54. Published
  55. Published

    Designing visual appearance using a structured surface. / Johansen, Villads Egede; Thamdrup, Lasse Højlund; Smitrup, Christian; Nielsen, Theodor; Sigmund, Ole; Vukusic, Peter.

    In: Optica, Vol. 2, No. 3, 2015, p. 239-245.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  56. Published

    Directional bending wave propagation in periodically perforated plates. / Andreassen, Erik; Manktelow, Kevin ; Ruzzene, Massimo .

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 187–203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  57. Published

    Distributed material density and anisotropy for optimized eigenfrequency of 2D continua. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 51, 2015, p. 1067-1076.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  58. Published

    Dynamic Coefficients of a Tilting Pad With Active Lubrication: Comparison Between Theoretical and Experimental Results. / Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Journal of Tribology, Vol. 137, No. 3, 031704, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  59. Published
  60. Published

    Effect of initial void shape on ductile failure in a shear field. / Tvergaard, Viggo.

    In: Mechanics of Materials, Vol. 90, 2015, p. 2-9.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  61. Published

    Effects of weak nonlinearity on dispersion relations and frequency band-gaps of periodic structures. / Sorokin, Vladislav; Thomsen, Jon Juel.

    Proceedings of 22nd International Congress on Sound and Vibration: Major challenges in Acoustics, Noise and Vibration Research, 2015. ed. / Malcolm J. Crocker; Marek Pawelczyk; Francesca Pedrielli; Eleonora Carletti; Sergio Luzzi. The International Institute of Acoustics and Vibration (IIAV), 2015. 989 (I).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  62. Published

    Efficient and stable model reduction scheme for the numerical simulation of broadband acoustic metamaterials. / Hyun, Jaeyub; Kook, Junghwan; Wang, Semyung.

    In: Computers & Mathematics with Applications, Vol. 69, No. 8, 2015, p. 876–892.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  63. Published

    Efficient Beam-Type Structural Modeling of Rotor Blades. / Couturier, Philippe; Krenk, Steen.

    Proceedings of the EWEA Annual Event and Exhibition 2015. European Wind Energy Association (EWEA), 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  64. Published

    Efficient Beam-Type Structural Modeling of Rotor Blades. / Couturier, Philippe; Krenk, Steen.

    2015. Poster session presented at EWEA Annual Conference and Exhibition 2015 , Paris, France.

    Publication: ResearchPoster – Annual report year: 2015

  65. Published
  66. Published

    Eigenfrequencies and eigenmodes of a beam with periodically continuously varying spatial properties. / Sorokin, Vladislav S.; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 347, 2015, p. 14-26.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  67. Published

    Eigenfrequency optimized 3D continua, with possibility for cavities. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Journal of Sound and Vibration, Vol. 341, 2015, p. 100–115.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  68. Published
  69. Published

    Experimental analyses of dynamical systems involving shape memory alloys. / Enemark, Søren; Savi, Marcelo A.; Santos, Ilmar F.

    In: Smart Structures and Systems, Vol. 15, No. 6, 2015, p. 1521-1542.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  70. Published

    Experimental and theoretical analysis of a rigid rotor supported by air foil bearings. / Larsen, Jon Steffen; Hansen, Asger J. T. ; Santos, Ilmar.

    In: Mechanics & Industry, Vol. 16, No. 1, 106, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  71. Published
  72. Published

    Experimental Identification of Dynamic Coefficients of Tilting-Pad Bearings with Active Lubrication. / Salazar, Jorge Andrés González; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    2015. Paper presented at 11th International Conference on Vibrations in Rotating Machines, Magdeburg, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2015

  73. Published

    Experimental Investigation of a Basalt Fiber Reinforced Composite toMetal Joint. / Costache, Andrei; Glejbøl, K.; Sivebæk, Ion Marius; Berggreen, Christian.

    2015. Poster session presented at 7th International Conference on Composite Testing and Model Identification, Madrid, Denmark.

    Publication: ResearchPoster – Annual report year: 2015

  74. Published

    Experimental Investigations of Decentralised Control Design for The Stabilisation of Rotor-Gas Bearings. / Theisen, Lukas Roy Svane; Galeazzi, Roberto; Niemann, Hans Henrik; Santos, Ilmar.

    Proceedings of the XVII International Symposium on Dynamic Problems of Mechanics. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  75. Published

    Experimental validation of a topology optimized acoustic cavity. / Christiansen, Rasmus Ellebæk; Sigmund, Ole; Fernandez Grande, Efren.

    In: Journal of the Acoustical Society of America, Vol. 138, No. 6, 2015, p. 3470-3474.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  76. Published
  77. Published
  78. Published

    Flat-top Drop Filter based on a Single Topology Optimized Photonic Crystal Cavity. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Guan, Xiaowei; Sigmund, Ole; Yvind, Kresten.

    Proceedings of 2015 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2015. Paper SF2H.7.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  79. Published

    Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test. / Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    Proceedings of the 20th International Conference on Composite Materials (ICCM20). ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  80. Published

    Frequency detuning effects for parametrically and directly excited elastic structures. / Neumeyer, Stefan; van Gastel, M. H. M. ; Sorokin, Vladislav; Thomsen, Jon Juel.

    Proceedings of the 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. ed. / M. Papadrakakis; V. Papadopoulos; V Plevris. Vol. 1 European Community on Computational Methods in Applied Sciences, 2015. p. 3029-3035.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  81. Published

    Friction Joint Between Basalt-Reinforced Composite and Aluminum. / Costache, Andrei; Glejbøl, Kristian; Sivebæk, Ion Marius; Berggreen, Christian.

    In: Tribology Letters, Vol. 59, No. 2, 30, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  82. Published
  83. Published

    G-control fatigue testing for cyclic crack propagation in composite structures. / Manca, Marcello; Berggreen, Christian; Carlsson, Leif A.

    In: Engineering Fracture Mechanics, Vol. 149, 2015, p. 375-386.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  84. Published

    Gradient-based optimization in nonlinear structural dynamics. / Dou, Suguang; Jensen, Jakob Søndergaard (Supervisor).

    DTU Mechanical Engineering, 2015. 176 p. (DCAMM Special Report; No. S184).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  85. Published

    Identifying parameters in active magnetic bearing system using LFT formulation and Youla factorization. / Lauridsen, Jonas; Sekunda, André Krabdrup; Santos, Ilmar; Niemann, Hans Henrik.

    Proceedings of 2015 IEEE Conference on Control Applications. IEEE, 2015. p. 430-435.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  86. Published

    Improvement in journal bearing design with application of computational fluid dynamics. / Christiansen, Christian Kim (Author); Klit, Peder (Author); Walther, Jens Honore (Author); Vølund, Anders (Author).

    2015. DCAMM 15th Internal Symposium, Horsens, Denmark, 16/03/2015.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2015

  87. Published

    Improvement in journal bearing design with application of computational fluid dynamics. / Christiansen, Christian Kim.

    2015. Abstract from DCAMM 15th Internal Symposium, Horsens, Denmark.

    Publication: ResearchConference abstract for conference – Annual report year: 2015

  88. Published

    Indentation of elastically soft and plastically compressible solids. / Needleman, A.; Tvergaard, Viggo; Van der Giessen, E.

    In: Acta Mechanica Sinica, Vol. 31, No. 4, 2015, p. 473-480.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  89. Published
  90. Published

    Lateral Dynamics of Flexible Rotors Supported by Controllable Gas Bearings Theory & Experiment. / Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar.

    Proceedings of the 11th International Conference on Vibrations in Rotating Machines. 2015. 62.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  91. Published
  92. Published

    Micromechanical study of the effect of inclusions on fatigue failure in a roller bearing. / Cerullo, Michele; Tvergaard, Viggo.

    In: International Journal of Structural Integrity, Vol. 6, No. 1, 2015, p. 124-141.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  93. Published

    Micro-Scale Experiments and Models for Composite Materials with Materials Research. / Zike, Sanita; Mikkelsen, Lars Pilgaard (Supervisor); Sørensen, Bent F. (Supervisor); Tvergaard, Viggo (Supervisor).

    DTU Wind Energy, 2015. 152 p. (DTU Wind Energy PhD; No. 0050(EN)).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  94. Published

    Minimizing tooth bending stress in spur gears with simplified shapes of fillet and tool shape determination. / Pedersen, Niels Leergaard.

    In: Engineering Optimization, Vol. 47, No. 6, 2015, p. 805-824.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  95. Published
  96. Published
  97. Published
  98. Published
  99. Published

    On Design of Anisotropy Distributions, Applying Lamina Formulas for 2d Result Visualization. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Proceedings of the 10th International Conference on Composite Science and Technology. ed. / A. L. Araújo; J. R. Correia; C. M. Mota Soares. IDMEC, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  100. Published

    On The Analysis of a Contact Friction Composite-To-Metal Joint. / Costache, Andrei; Anyfantis, K. N.; Berggreen, Christian.

    2015. Poster session presented at 19th International Conference on Composite Materials, Montréal, Canada.

    Publication: Research - peer-reviewPoster – Annual report year: 2015

  101. Published

    On the Influence of Force Distribution and Boundary Condition on Helical Gear Stiffness. / Pedersen, Niels Leergaard.

    In: Modeling, Identification and Control (Online), Vol. 36, No. 3, 2015, p. 143-155.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  102. Published

    On the nonlinear steady state response of rigid rotors supported by air foil bearings - Theory and experiments. / Larsen, Jon Steffen; Santos, Ilmar.

    In: Journal of Sound and Vibration, Vol. 346, 2015, p. 284-297.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  103. Published

    On the Numerical Simulation of Nonlinear Transient Behavior of Compliant Air Foil Bearings. / Larsen, Jon Steffen; Nielsen, Bo Bjerregaard; Santos, Ilmar.

    2015. Paper presented at 11th International Conference on Vibrations in Rotating Machines, Magdeburg, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2015

  104. Published

    Optimal Design of Porous Materials. / Andreassen, Erik; Jensen, Jakob Søndergaard (Supervisor); Sigmund, Ole (Supervisor); Thomsen, Jon Juel (Supervisor).

    DTU Mechanical Engineering, 2015. 176 p. (DCAMM Special Report; No. S172).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  105. Published

    Optimization of contact stress distribution in interference fit. / Pedersen, Niels Leergaard.

    Proceedings of WCSMO-11 . 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  106. Published

    Optimization of nonlinear structural resonance using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    In: Journal of Sound and Vibration, Vol. 334, 2015, p. 239–254.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  107. Published

    Piezoelectric RL shunt damping of flexible structures. / Høgsberg, Jan Becker; Krenk, Steen.

    Proceedings of 7th ECCOMAS Thematic Conference on Smart Structures and Materials. ed. / A.L. Araúo; C.A. Mota Soares. IDMEC, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  108. Published

    Plasticity dependent damage evolution in composites with strain-gradient effects. / Legarth, Brian Nyvang.

    In: International Journal of Solids and Structures, Vol. 63, 2015, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  109. Published
  110. Published

    Probabilistic fatigue life of balsa cored sandwich composites subjected to transverse shear. / Dimitrov, Nikolay Krasimirov; Berggreen, Christian.

    In: Journal of Sandwich Structures & Materials, Vol. 17, No. 5, 2015, p. 562-577.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  111. E-pub ahead of print
  112. Published

    Quasi-Static Single-Component Hybrid Simulation of a Composite Structure with Multi-Axis Control. / Høgh, J.; Waldbjørn, J.; Wittrup-Schmidt, J.; Stang, H.; Berggreen, C.

    In: Strain, Vol. 51, 2015, p. 459–473.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  113. Published

    Reducing Wind Turbine Load Simulation Uncertainties by Means of a Constrained Gaussian Turbulence Field. / Dimitrov, Nikolay Krasimirov; Lazarov, Boyan Stefanov.

    Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). ed. / Terje Haukaas. The University of British Columbia, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  114. Published

    Retrofitting the Superstructure of a Large Passenger Ship Using Composites – A Demonstration. / Karatzas, Vasileios; Hjørnet, Niels; Berggreen, Christian; Jensen, Jørgen Juncher.

    Proceedings of the 20th International Conference on Composite Materials (ICCM20). ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  115. Published

    Rolling induced size effects in elastic–viscoplastic sheet metals. / Nielsen, Kim Lau.

    In: European Journal of Mechanics A - Solids, Vol. 53, 2015, p. 259-267.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  116. Published

    Shape memory alloys applied to improve rotor-bearing system dynamics - an experimental investigation. / Enemark, Søren; Santos, Ilmar; Savi, Marcelo A.

    Proceedings of the 17th International Symposium on Dynamic Problems of Mechanics. ed. / V. Steffen Jr.; D. A. Rade; W. M. Bessa. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  117. Published
  118. Published

    Simultaneous parameter and tolerance optimization of structures via probability-interval mixed reliability model. / Luo, Yangjun; Wu, Xiaoxiang; Zhou, Mingdong; Wang, Michael Yu.

    In: Structural and Multidisciplinary Optimization, Vol. 51, No. 3, 2015, p. 705-719.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  119. Published
  120. Published

    Strain gradient crystal plasticity: A continuum mechanics approach to modeling micro-structural evolution. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau; Niordson, Christian Frithiof.

    Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling: Proceedings of PLASTICITY ’15. ed. / Akhtar S. Khan. NEAT Press, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  121. Published

    Stress-constrained topology optimization for compliant mechanism design. / de Leon, Daniel M.; Alexandersen, Joe; Jun, Jun S.; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 52, No. 5, 2015, p. 929-943.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  122. Published

    Structural optimization for nonlinear dynamic response. / Dou, Suguang; Strachan, B. Scott; Shaw, Steven W.; Jensen, Jakob Søndergaard.

    In: Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences, Vol. 373, No. 2051, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  123. Published

    Study of localization in a void-sheet under stress states near pure shear. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 75-76, 2015, p. 134-142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  124. Published

    Tailoring Macroscale Response of Mechanical and Heat Transfer Systems by Topology Optimization of Microstructural Details. / Alexandersen, Joe; Lazarov, Boyan Stefanov.

    Engineering and Applied Sciences Optimization: Dedicated to the Memory of Professor M.G. Karlaftis. ed. / Nikos D. Lagaros ; Manolis Papadrakakis. Vol. 38 Springer, 2015. p. 267-288 (Computational Methods in Applied Sciences).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2015

  125. Published

    The effect of loading rate on ductile fracture toughness and fracture surface roughness. / Osovski, S.; Srivastava, Akhilesh Kumar; Ponson, L.; Bouchaud, E.; Tvergaard, Viggo; Ravi-Chandar, K.; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 76, 2015, p. 20-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  126. Published

    The method of varying amplitudes for solving (non)linear problems involving strong parametric excitation. / Sorokin, Vladislav; Thomsen, Jon Juel.

    Proceedings of the IUTAM Symposium on Analytical Methods in Nonlinear Dynamics. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  127. Published
  128. Published

    Topology optimisation of passive coolers for light-emitting diode lamps. / Alexandersen, Joe.

    Proceedings of WCSMO-11 . 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  129. Published

    Topology optimization for coated structures. / Clausen, Anders; Andreassen, Erik; Sigmund, Ole.

    Proceedings of WCSMO-11 . 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  130. Published

    Topology Optimization of an Actively Cooled Electronics Section for Downhole Tools. / Soprani, Stefano; Klaas Haertel, Jan Hendrik; Lazarov, Boyan Stefanov; Sigmund, Ole; Engelbrecht, Kurt.

    Proceedings. COMSOL Conference 2015. COMSOL Inc., 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  131. Published

    Topology optimization of coated structures and material interface problems. / Clausen, Anders; Aage, Niels; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 290, 2015, p. 524-541.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  132. Published

    Topology Optimization of Coupled Photonic Crystal Cavities for Flat-top Drop Filter Functionality. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Sigmund, Ole; Yvind, Kresten.

    2015. Abstract from CLEO/Europe - EQEC 2015, Munich, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2015

  133. Published

    Topology Optimization of Thermal Heat Sinks. / Klaas Haertel, Jan Hendrik; Engelbrecht, Kurt; Lazarov, Boyan Stefanov; Sigmund, Ole.

    Proceedings. COMSOL conference 2015. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  134. Published
  135. Published

    Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations. / Clausen, Anders; Wang, Fengwen; Jensen, Jakob Søndergaard; Sigmund, Ole; Lewis, Jennifer A.

    In: Advanced Materials, Vol. 27, No. 37, 2015, p. 5523-5527.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  136. Published

    Topology optimized design for silicon-on-insulator mode converter. / Frellsen, Louise Floor (Invited author); Frandsen, Lars Hagedorn (Invited author); Ding, Yunhong (Invited author); Elesin, Yuriy (Invited author); Sigmund, Ole (Invited author); Yvind, Kresten (Invited author).

    Proceeding of IEEE Photonics Conference. IEEE, 2015. p. 162-163.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  137. Published

    Topology-optimized silicon photonic wire mode (de)multiplexer. / Frellsen, Louise Floor; Frandsen, Lars Hagedorn; Ding, Yunhong; Elesin, Yuriy; Sigmund, Ole; Yvind, Kresten.

    Proceedings of SPIE. ed. / Graham T. Reed; Michael R. Watts. Vol. 9367 SPIE - International Society for Optical Engineering, 2015. 93670X-1 (Proceedings of S P I E - International Society for Optical Engineering).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  138. Published

    Vibration Control of a Flexible Rotor Using Shape Memory Alloy Wires. / Alves, Marco Túlio Santana; Enemark, Søren; Steffen Jr, Valdar; Santos, Ilmar.

    Proceedings of the 17th International Symposium on Dynamic Problems of Mechanics. ed. / V. Steffen Jr.; D. A. Rade; W. M. Bessa. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  139. Published

    Vibration suppression for strings with distributed loading using spatial cross-section modulation. / Sorokin, Vladislav; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 66–77.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  140. Published

    Weakly nonlinear dispersion and stop-band effects for periodic structures. / Sorokin, Vladislav; Thomsen, Jon Juel.

    2015. Abstract from 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, The Island of Crete, Greece.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2015

  141. 2014
  142. Published

    Advanced Topology Optimization Methods for Conceptual Architectural Design. / Aage, Niels; Amir, Oded; Clausen, Anders; Hadar, Lior ; Maier, Dana ; Søndergaard, Asbjørn .

    Advances in Architectural Geometry 2014. ed. / P. Block; J. Knippers; N.J. Mitra; W. Wang. Springer, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  143. Published

    Analysis of enhanced modal damping ratio in porous materials using an acoustic-structure interaction model. / Kook, Junghwan; Jensen, Jakob Søndergaard.

    In: A I P Advances, Vol. 4, No. 12, 124304, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  144. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  145. Published
  146. Published

    Analytical sensitivity analysis and topology optimization of nonlinear resonant structures with hardening and softening behavior. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Abstract from 17th U.S. National Congress on Theoretical and Applied Mechanics, East Lansing, Michigan, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  147. Published
  148. Published
  149. Published

    A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. / Ashouri Vajari, Danial; González, Carlos; Llorca, Javier; Legarth, Brian Nyvang.

    In: Composites Science and Technology, Vol. 97, 2014, p. 46-54.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  150. Published
  151. Published
  152. Published

    Application of finite elements and computational fluid dynamics to predict and improve the filling ratio in journal bearings under dynamic loading. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. 2014. (TRITA-MEK Technical report; No. 2014:24).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  153. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  154. Published

    Bend-twist coupling potential of wind turbine blades. / Fedorov, Vladimir; Berggreen, Christian.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012035, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  155. Published

    Bifurcation analysis of a smoothed model of a forced impacting beam and comparison with an experiment. / Elmegård, Michael; Krauskopf, B.; Osinga, H.M.; Starke, Jens; Thomsen, Jon Juel.

    In: Nonlinear Dynamics, Vol. 77, 2014, p. 951–966.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  156. Published

    Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids. / Tvergaard, Viggo.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 112-122.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  157. Published

    Cavitation analysis of a journal bearing - Finite Element modelling and experimental studies. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. ed. / Lars Pleth Nielsen; Ion Marius Sivebæk; Svend Stensig Eskildsen; Sascha Louring; Lone Elly Larsen. Danish Technological Institute, 2014. p. 81.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  158. Published

    Characterizing and Modeling Brittle Bi-material Interfaces Subjected to Shear. / Anyfantis, Konstantinos; Berggreen, Christian.

    In: Applied Composite Materials, Vol. 21, 2014, p. 905–919.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  159. Published

    Combined shape and topology optimization for minimization of von Mises Stress. / Christiansen, Asger Nyman; Tortorelli, Daniel A.; Aage, Niels; Sigmund, Ole.

    2014. Abstract from 4th International Conference on Engineering Optimization, Lisbon, Portugal.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  160. Published

    Comparing the Gauss-Seidel and Jacobi Relaxation Schemes in the Solution of the EHL Line Contact Problem Using a Multigrid solver. / Janakiraman, Shravan; Klit, Peder.

    2014. Paper presented at 16th Nordic Symposium on Tribology, Aarhus, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  161. Published
  162. Published

    Comparison of Four Numerical Methods of EHL Modeling. / Janakiraman, Shravan; Klit, Peder.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014. p. 83.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  163. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  164. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  165. Published

    Computational stress and damage modelling for rolling contact fatigue. / Cerullo, Michele; Tvergaard, Viggo (Supervisor); Niordson, Christian Frithiof (Supervisor); Klit, Peder (Supervisor).

    DTU Mechanical Engineering, 2014. 136 p. (DCAMM Special Report; No. S169).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  166. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  167. Published

    CONTINEX: A Toolbox for Continuation in Experiments. / Schilder, Frank; Bureau, Emil; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Technische Universität Wien, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  168. Published
  169. Published

    Damping of Offshore Wind Turbine Tower Vibrations by a Stroke Amplifying Brace. / Brodersen, Mark Laier; Høgsberg, Jan Becker.

    In: Energy Procedia, Vol. 53, No. C, 2014, p. 258-267.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  170. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/2014.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  171. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  172. Published

    Design of material anisotropy constitutive matrices for structural stiffness and strength optimization. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Engineering Optimization IV. ed. / H.C. Rodrigues. C R C Press LLC, 2014. p. 169-173.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  173. Published

    Design of materials with prescribed nonlinear properties. / Wang, Fengwen; Sigmund, Ole; Jensen, Jakob Søndergaard.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 156-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  174. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  175. Published
  176. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  177. Published

    Dynamic interaction between rotor and axially-magnetized passive magnetic bearing considering magnetic eccentricity. / Enemark, Søren; Santos, Ilmar.

    Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition. Vol. 4A American Society of Mechanical Engineers, 2014. IMECE2014-38032.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  178. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  179. Published
  180. Published

    Experimental Bifurcation Analysis Using Control-Based Continuation. / Bureau, Emil; Santos, Ilmar (Main supervisor); Thomsen, Jon Juel (Supervisor); Starke, Jens.

    DTU Mechanical Engineering, 2014. 145 p. (DCAMM Special Report; No. S163).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  181. Published

    Experimental Grey Box Model Identification of an Active Gas Bearing. / Theisen, Lukas Roy Svane; Pierart Vásquez, Fabián Gonzalo; Niemann, Hans Henrik; Santos, Ilmar; Blanke, Mogens.

    Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014. ed. / Jyoti K. Sinha. Springer, 2014. p. 963-976 (Mechanisms and Machine Science, Vol. 23).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  182. Published

    Experiments in nonlinear dynamics using control-based continuation: Tracking stable and unstable response curves. / Bureau, Emil; Schilder, Frank; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Technische Universität Wien, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  183. Published

    Explicit free‐floating beam element. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 98, No. 1, 2014, p. 59-78.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  184. Published
  185. Published

    Extended neural network-based scheme for real-time force tracking with magnetorheological dampers. / Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker.

    In: Structural Control and Health Monitoring, Vol. 21, No. 2, 2014, p. 225–247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  186. Published

    Face/core mixed mode debond fracture toughness characterization using the modified TSD test method. / Berggreen, Christian; Quispitupa, Amilcar; Costache, Andrei; Carlsson, Leif A.

    In: Journal of Composite Materials, Vol. 48, No. 16, 2014, p. 1939-1945.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  187. Published

    Fatigue and Wear in Rolling and Sliding Contacts. / Janakiraman, Shravan; Klit, Peder (Supervisor).

    DTU Mechanical Engineering, 2014. 168 p. (DCAMM Special Report; No. S181).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  188. Published

    Feedback-Controlled Lubrication for Reducing the Lateral Vibration of Flexible Rotors supported by Tilting-Pad Journal Bearings. / Salazar, Jorge Andrés González; Santos, Ilmar.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  189. Published
  190. Published

    General beam cross-section analysis using a 3D finite element slice. / Couturier, Philippe; Krenk, Steen.

    Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE2014). American Society of Mechanical Engineers, 2014. IMECE2014-36721.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  191. Published

    Global Format for Conservative Time Integration in Nonlinear Dynamics. / Krenk, Steen.

    Proceedings of 9th European Conference on Structural Dynamics, EURODYN 2014. ed. / A. Cunha; E. Caetano; P. Ribeiro; G. Müller. European Association for Structural Dynamics, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  192. Published

    Global format for energy-momentum based time integration in nonlinear dynamics. / Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 100, No. 6, 2014, p. 458-476.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  193. Published

    How to determine composite material properties using numerical homogenization. / Andreassen, Erik; Andreasen, Casper Schousboe.

    In: Computational Materials Science, Vol. 83, 2014, p. 488-495.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  194. Published

    Hybrid Method Simulation of Slender Marine Structures. / Christiansen, Niels Hørbye; Sødahl, Nils (Supervisor); Høgsberg, Jan Becker (Supervisor).

    DTU Mechanical Engineering, 2014. 114 p. (DCAMM Special Report; No. S182).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  195. Published
  196. Published
  197. Published

    Jumps and bi-stability in the phase-gain characteristics of a nonlinear parametric amplifier. / Neumeyer, Stefan; van de Looij, Ruud ; Thomsen, Jon Juel.

    ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference. ed. / Horst Ecker; Alois Steindl; Stefan Jakubek. Vienna University of Technology, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  198. Published

    Kinematics and Dynamics of Roller Chain Drives. / Fuglede, Niels; Thomsen, Jon Juel (Main supervisor).

    DTU Mechanical Engineering, 2014. 200 p. (DCAMM Special Report; No. S175).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  199. Published

    Laboratory Simulation of Rolling Contact Fatigue Cracks in Wind Turbine Bearings Using Hydrogen Infused 100Cr6 Bearing Steel. / Janakiraman, Shravan; West, Ole; Klit, Peder; Jensen, Niels Steenfeldt.

    2014. Paper presented at 16th Nordic Symposium on Tribology, Aarhus, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  200. Published

    Machine Elements : Analysis and Design. / Klit, Peder; Pedersen, Niels Leergaard.

    2 ed. Kgs. Lyngby, Denmark : Polyteknisk Boghandel og Forlag, 2014. 298 p.

    Publication: EducationBook – Annual report year: 2014

  201. Published

    Mapping of properties for optical appearance of anodized aluminum. / Johansen, Villads Egede; Jensen, Flemming ; Aggerbeck, Martin; Gudla, Visweswara Chakravarthy.

    2014. Abstract from 2nd International Symposium on Anodizing Science and Technology, Sapporo, Japan.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2015

  202. Published
  203. Published

    Nonlinear Analysis of Rotors Supported by Air Foil Journal Bearings – Theory and Experiments. / Larsen, Jon Steffen; Santos, Ilmar (Main supervisor); Pløger, Frans (Supervisor).

    DTU Mechanical Engineering, 2014. 244 p. (DCAMM Special Report; No. S177).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  204. Published

    Nonlinear dynamics of a pseudoelastic shape memory alloy system - theory and experiment. / Enemark, Søren; A Savi, M.; Santos, Ilmar.

    In: Smart Materials and Structures, Vol. 23, No. 8, 085018, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  205. Published

    Numerical and experimental investigation of bump foil mechanical behaviour. / Larsen, Jon Steffen; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Tribology International, Vol. 74, 2014, p. 46–56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  206. Published

    Numerical simulation of cropping. / Tvergaard, Viggo; Hutchinson, John W.

    In: Journal of Applied Mechanics, Vol. 81, No. 7, 071002, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  207. Published

    Observations on the effects of grooved surfaces on the interfacial torque in highly loaded rolling and sliding tests. / Janakiraman, Shravan; Klit, Peder; Jensen, Niels Steenfeldt; Grønbæk, Jens.

    In: Tribology International, Vol. 81, 2014, p. 179–189.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  208. Published

    On gear tooth stiffness evaluation. / Pedersen, Niels Leergaard; Jørgensen, Martin Felix.

    In: Computers & Structures, Vol. 135, 2014, p. 109-117.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  209. Published

    On helical gear stiffness evaluation. / Pedersen, Niels Leergaard.

    Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. 2014. p. 236-239 (TRITA-MEK Technical report; No. 2014:24).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  210. Published

    On multigrid-CG for efficient topology optimization. / Amir, Oded; Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, Vol. 49, 2014, p. 815–829.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  211. Published

    On optimization of internal/external spur gears tooth bending strength. / Pedersen, Niels Leergaard.

    Engineering Optimization IV. ed. / H.C. Rodrigues. C R C Press LLC, 2014. p. 217-218.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  212. Published

    On the consistency of adjoint sensitivity analysis for structural optimization of linear dynamic problems. / Jensen, Jakob Søndergaard; Nakshatrala, Praveen B.; Tortorelli, Daniel A.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 5, 2014, p. 831-837.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  213. Published

    On the failure analysis of bondlines: Stress or energy based fracture criteria?. / Anyfantis, Konstantinos.

    In: Engineering Fracture Mechanics, Vol. 126, 2014, p. 108-125.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  214. Published

    On the homogenization of metal matrix composites using strain gradient plasticity. / Azizi, Reza; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: Acta Mechanica Sinica, Vol. 30, No. 2, 2014, p. 175-190.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  215. Published
  216. Published

    On the response of a nonlinear parametric amplifier driven beyond resonance. / Sorokin, Vladislav.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Vienna University of Technology, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  217. Published

    On the unlimited gain of a nonlinear parametric amplifier. / Sorokin, Vladislav.

    In: Mechanics Research Communications, Vol. 62, 2014, p. 111–116.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  218. Published

    Optical role of randomness for structured surfaces. / Johansen, Villads Egede.

    In: Applied Optics, Vol. 53, No. 11, 2014, p. 2405-2415.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  219. Published

    Optimal design of hardening and softening resonances of plane frame structures : Extended abstract. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Paper presented at 8th European Nonlinear Dynamics Conference, Vienna, Austria.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  220. Published

    Optimality criteria for the components of anisotropic constitutive matrix. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 50, 2014, p. 181-191.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  221. Published

    Optimized Mooring Line Simulation Using a Hybrid Method Time Domain Scheme. / Christiansen, Niels Hørbye; Voie, Per Erlend Torbergsen; Høgsberg, Jan; Sodahl, Nils.

    Proceedings of the 33rd International Conference on Ocean, Offshore and Arctic Engineering: Offshore Technology. Vol. 1B American Society of Mechanical Engineers, 2014. OMAE2014-23939.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  222. Published

    Optimized surface textures for hydrodynamic bearings. / Andreasen, Casper Schousboe.

    27th Nordic Seminar on Computational Mechanics (NSCM-27). ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. Kungl. Tekniska högskolan I Stockholm, 2014. p. 244-247.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  223. Published

    Practical design of a nonlinear tuned vibration absorber. / Grappasonni, C.; Habib, G.; Detroux, T.; Wang, Fengwen; Kerschen, G.; Jensen, Jakob Søndergaard.

    Proceedings of International Conference on Noise and Vibration Engineering (isma2014) and International Conference on Uncertainty in Structural Dynamics (usd2014). Katholieke Universiteit Leuven, 2014. p. 3029-3046.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  224. Published

    Reliability based topology optimization for continuum structures with local failure constraints. / Luo, Yangjun; Zhou, Mingdong; Wang, Michael Yu; Deng, Zichen.

    In: Computers and Structures, Vol. 143, 2014, p. 73-84.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  225. Published
  226. Published

    Rolling Contact Fatigue Of Hydrogen Infused Bearing Surfaces Under An Applied Hoop Stress And EHL Conditions. / Janakiraman, Shravan; West, Ole; Klit, Peder; Jensen, Niels Steenfeldt.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014. p. 16.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  227. Published
  228. Published

    Strain gradient effects in periodic flat punch indenting at small scales. / Nielsen, Kim Lau; Niordson, Christian Frithiof; Hutchinson, J. W.

    In: International Journal of Solids and Structures, Vol. 51, No. 21-22, 2014, p. 3549-3556.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  229. Published

    Structural colours and applications to anodised aluminium surfaces. / Johansen, Villads Egede; Sigmund, Ole (Supervisor); Aage, Niels (Supervisor); Breinbjerg, Olav (Supervisor).

    DTU Mechanical Engineering, 2014. 215 p. (DCAMM Special Report; No. S173).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  230. Published

    Structural optimization of wind turbine rotor blades by multilevel sectional/multibody/3D-FEM analysis. / Bottasso, C. L.; Campagnolo, F.; Croce, A.; Dilli, S.; Gualdoni, F.; Nielsen, Martin Bjerre.

    In: Multibody System Dynamics, Vol. 32, No. 1, 2014, p. 87-116.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  231. Published

    Sub-surface Fatigue Crack Growth at Alumina Inclusions in AISI 52100 Roller Bearings. / Cerullo, Michele.

    In: Procedia Engineering, Vol. 74, 2014, p. 333-338.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  232. Published

    Suppression of vibration in bounded structures subjected to action of a distributed load by continuous spatial modulations of their parameters. / Sorokin, Vladislav.

    Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  233. Published

    Theoretical and experimental investigation of cavitation in main bearings for large two-stroke marine diesel engines. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    2014. Abstract from 10th European Fluid Mechanics Conference (EUROMECH), KGs. Lyngby, Denmark.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  234. Published

    Tilting-Pad Journal Bearings with Active Lubrication Applied as Calibrated Shakers: Theory and Experiment. / Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Journal of Vibration and Acoustics, Vol. 136, No. 6, 061010, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  235. Published
  236. Published

    Topology optimisation of natural convection problems. / Alexandersen, Joe; Aage, Niels; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: International Journal for Numerical Methods in Fluids, Vol. 76, No. 10, 2014, p. 699-721.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  237. Published

    Topology Optimisation of Thermomechanical Functionally Graded Materials and Material Interfaces. / Alexandersen, Joe; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2014. Abstract from 13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, São Paulo, Brazil.

    Publication: ResearchConference abstract for conference – Annual report year: 2014

  238. Published

    Topology optimised design of robust material microstructures without length scale separation. / Alexandersen, Joe; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2014. Abstract from International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  239. Published

    Topology optimization for optical projection lithography with manufacturing uncertainties. / Zhou, Mingdong; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Applied Optics, Vol. 53, No. 12, 2014, p. 2720-2729.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  240. Published

    Topology optimization of fail-safe structures using a simplified local damage model. / Jansen, Miche; Lombaert, Geert; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 4, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  241. Published

    Topology Optimization of Flow Machinery. / Andreasen, Casper Schousboe; Aage, Niels; Madsen, Thomas B.S. .

    Proceedings of 1st International Conference on Engineering and Applied Sciences Optimization. ed. / M. G Karlaftis; N. D. Lagaros; M. Papadrakakis. National Technical University of Athens, 2014. p. 1964.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  242. Published

    Topology optimization of metallic waveguide filters. / Aage, Niels; Johansen, Villads Egede; Sørensen, Peter Jagd; Zhurbenko, Vitaliy.

    2014. Abstract from International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  243. Published
  244. Published
  245. Published

    Topology Optimization Using Multiscale Finite Element Method for High-Contrast Media. / Lazarov, Boyan Stefanov.

    Large-Scale Scientific Computing. Revised Selected Papers. Springer, 2014. p. 339–346 (Lecture Notes in Computer Science, Vol. 8353).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  246. Published

    Topology optimization with flexible void area. / Clausen, Anders; Aage, Niels; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 50, No. 6, 2014, p. 927-943.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  247. Published

    Topology-optimized broadband surface relief transmission grating. / Andkjær, Jacob; Ryder, Christian P.; Nielsen, Peter C.; Rasmussen, Thomas; Buchwald, Kristian; Sigmund, Ole.

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8980, 898006, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  248. Published
  249. Published

    Tuned mass absorber on a flexible structure. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Sound and Vibration, Vol. 333, No. 6, 2014, p. 1577-1595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  250. Published

    Uncertainty analysis of a one-dimensional constitutive model for shape memory alloy thermomechanical description. / Oliveira, Sergio A.; Savi, Marcelo A.; Santos, Ilmar F.

    In: International Journal of Applied Mechanics, Vol. 6, No. 6, 1450067, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  251. Published
  252. Published

    Using Data Mining Approaches for Force Prediction of a Dynamically Loaded Flexible Structure. / Schlechtingen, Meik; Achiche, Sofiane; Lourenco Costa, Tiago; Santos, Ilmar.

    Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014). American Society of Mechanical Engineers, 2014. ESDA2014-20259.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  253. Published

    Wind energy technology developments. / Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard.

    DTU International Energy Report 2014: Wind energy — drivers and barriers for higher shares of wind in the global power generation mix. ed. / Hans Hvidtfeldt Larsen; Leif Sønderberg Petersen. Technical University of Denmark, 2014. p. 32-42.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  254. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 2: Application examples. / Schlechtingen, Meik; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 14, 2014, p. 447-460.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  255. 2013
  256. Published

    A 2D finite element implementation of the Fleck–Willis strain-gradient flow theory. / Nielsen, Kim Lau; Niordson, Christian Frithiof.

    In: European Journal of Mechanics A - Solids, Vol. 41, 2013, p. 134-142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  257. Published

    Acoustical topology optimization of Zwicker's loudness with Padé approximation. / Kook, Junghwan; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 255, 2013, p. 40-66.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  258. Published

    Actively lubricated bearings applied as calibrated shakers to aid parameter identification in rotordynamics. / Santos, Ilmar; Cerda Varela, Alejandro Javier.

    Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 7B American Society of Mechanical Engineers, 2013. GT2013-95674.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  259. Published

    A deformation mechanism map for polycrystals modeled using strain gradient plasticity and interfaces that slide and separate. / Dahlberg, Carl F.O.; Faleskog, Jonas; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 43, 2013, p. 177-195.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  260. Published

    Adjustable ETHD lubrication applied to the improvement of dynamic performance of flexible rotors supported by active TPJB. / Salazar, Jorge Andrés González; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  261. Published

    Aerodynamic and Mechanical System Modelling. / Jørgensen, Martin Felix; Pedersen, Niels Leergaard (Main supervisor); Sørensen, Jens Nørkær (Supervisor).

    Technical University of Denmark. Department of Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S160).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  262. Published

    A global condition monitoring system for wind turbines. / Schlechtingen, Meik; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S150).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  263. Published

    Analysis of phononic bandgap structures with dissipation. / Andreassen, Erik; Jensen, Jakob Søndergaard.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041015, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  264. Published
  265. Published

    A New Rig for Testing Textured Surfaces in Pure Sliding Conditions. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 50, No. 3, 2013, p. 397-405.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  266. Published
  267. Published

    A Vortex Generator Flow Model Based on Self-Similarity : Technical notes. / Velte, Clara Marika.

    In: AIAA Journal, Vol. 51, No. 2, 2013, p. 526-529.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  268. Published

    Beam section stiffness properties usig 3D finite elements. / Couturier, Philippe; Krenk, Steen; Høgsberg, Jan Becker.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  269. Published

    Characterisation and Testing of Multifunctional Surfaces. / Godi, Alessandro; De Chiffre, Leonardo (Main supervisor); Hansen, Hans Nørgaard (Supervisor); Klit, Peder (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 290 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  270. Published
  271. Published

    Compliant Foil Journal Bearings - Investigation of Dynamic Properties. / Larsen, Jon Steffen; Santos, Ilmar.

    2013. Paper presented at SIRM 2013 , Berlin, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  272. Published
  273. Published

    Dynamics of Rigid Bodies and Flexible Beam Structures. / Nielsen, Martin Bjerre; Krenk, Steen (Main supervisor).

    DTU Mechanical Engineering, 2013. 200 p. (DCAMM Special Report; No. S156).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  274. Published

    Efficient Mooring Line Fatigue Analysis Using a Hybrid Method Time Domain Simulation Scheme. / Christiansen, Niels Hørbye; Voie, Per Erlend Torbergsen; Høgsberg, Jan Becker; Sødahl, Nils.

    ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Vol. 1 American Society of Mechanical Engineers, 2013. OMAE2013-10682.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  275. Published

    Energy-release rate and mode mixity of face/core debonds in sandwich beams. / Kardomateas, George A.; Berggreen, Christian; Carlsson, Leif A.

    In: AIAA Journal, Vol. 51, No. 4, 2013, p. 885-892.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  276. Published

    Equal modal damping design for a family of resonant vibration control formats. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Vibration and Control, Vol. 19, No. 9, 2013, p. 1294-1315.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  277. Published

    Estimating Gear Teeth Stiffness. / Pedersen, Niels Leergaard.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.-A. Mardal; A. Massing. Center for Biomedical Computing, Simula Research Laboratory, 2013. p. 225-228.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  278. Published

    Experimental and numerical study of the micro-mechanical failure in composites. / Ashouri Vajari, Danial; Martyniuk, Karolina; Sørensen, Bent F.; Legarth, Brian Nyvang.

    Proceedings of the 19th International Conference on Composite Materials . Canadian Association for Composite Structures and Materials, 2013. p. 5853-5863.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  279. Published
  280. Published

    Experimental calibration of forward and inverse neural networks for rotary type magnetorheological damper. / Bhowmik, Subrata; Weber, Felix; Høgsberg, Jan Becker.

    In: Structural Engineering and Mechanics, Vol. 46, No. 5, 2013, p. 673-693.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  281. Published

    Experimental quantification of contact forces with impact, friction and uncertainty analysis. / Lahriri, Said; Santos, Ilmar.

    In: Tribology International, Vol. 66, 2013, p. 93-104.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  282. Published
  283. Published

    Experimental Validation of Topology Optimization for RF MEMS Capacitive Switch Design. / Philippine, Mandy Axelle; Zareie, Hosein; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 6, 2013, p. 1296-1309.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  284. Published

    Explicit fourth-order stiffness representation in non-linear dynamics. / Krenk, Steen.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  285. Published

    Fracture of anisotropic materials with plastic strain-gradient effects. / Legarth, Brian Nyvang.

    Proceedings - 13th International Conference on Fracture. Chinese Society of Theoretical and Applied Mechanics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  286. Published

    Hybrid Testing of Composite Structures with Single-Axis Control. / Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 19th International Conference on Composite Materials. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  287. Published

    Implementation and applications of a finite-element model for the contact between rough surfaces. / Poulios, Konstantinos; Klit, Peder.

    In: Wear, Vol. 303, No. 1-2, 2013, p. 1-8.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  288. Published

    Improved switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    In: Optics Letters, Vol. 38, No. 14, 2013, p. 2466-2468.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  289. Published

    Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication. / Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  290. Published

    Improving nanocavity switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2013. p. MI1-7.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  291. Published

    Improving Topology Optimization using Games. / Nobel-Jørgensen, Morten; Christiansen, Asger Nyman; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  292. Published

    Interactive topology optimization on hand-held devices. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  293. Published

    Length-scale effect due to periodic variation of geometrically necessary dislocation densities. / Oztop, M. S.; Niordson, Christian Frithiof; Kysar, J. W.

    In: International Journal of Plasticity, Vol. 41, 2013, p. 189-201.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  294. Published

    Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material. / Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders; Izui, Kazuhiro; Nishiwaki, Shinji; Kogiso, Nozomu.

    In: I E E E Transactions on Magnetics, Vol. 49, No. 5, 2013, p. 2081-2084.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  295. Published

    Macromechanical parametric amplification. / Neumeyer, Stefan; Thomsen, Jon Juel.

    2013. Poster session presented at DCAMM 14th Internal Symposium, Nyborg, Denmark.

    Publication: ResearchPoster – Annual report year: 2013

  296. Published

    Macromechanical parametric amplification with a base-excited doubly clamped beam. / Neumeyer, Stefan; Thomsen, Jon Juel.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  297. Published

    Material size effects on crack growth along patterned wafer-level Cu–Cu bonds. / Tvergaard, Viggo; Niordson, Christian Frithiof; Hutchinson, John W.

    In: International Journal of Mechanical Sciences, Vol. 68, 2013, p. 270-276.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  298. Published

    Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery. / Cerda Varela, Alejandro Javier; Santos, Ilmar (Main supervisor).

    Kgs. Lynby : Technical University of Denmark, 2013. 206 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  299. Published
  300. Published

    Multibody drivetrain model used for predicting gear tooth stresses in a planetary gearbox. / Jørgensen, Martin Felix (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/2013.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  301. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix (Author).

    2013. DCAMM 14th Internal Symposium, Nyborg, Denmark, 13/03/2013.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  302. Published

    Multibody motion in implicitly constrained director format with links via explicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings - ECCOMAS Multibody Dynamics 2013. 2013. p. 231-240.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  303. Published

    Observations on Mode I ductile tearing in sheet metals. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau.

    In: European Journal of Mechanics A - Solids, Vol. 42, 2013, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  304. Published

    On modeling of geometrically necessary dislocation densities in plastically deformed single crystals. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 19th International Symposium on Plasticity & Its Current Applications 2013. NEAT Press, 2013. p. 22-24.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  305. Published

    On strength design using free material subjected to multiple load cases. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 7-17.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  306. Published

    On the similarities between micro/nano lithography and topology optimization projection methods. / Jansen, Miche ; Lazarov, Boyan Stefanov; Schevenels, Mattias ; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 48, No. 4, 2013, p. 717-730.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  307. Published

    Optimization in Nonlinear Structural Dynamics with Reduced Order Models. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2013. Poster session presented at DCAMM 14th Internal Symposium, Nyborg, Denmark.

    Publication: Research - peer-reviewPoster – Annual report year: 2014

  308. Published

    Optimization of Bolt Stress. / Pedersen, Niels Leergaard.

    Proceedings - 10th World Congress on Structural and Multidisciplinary Optimization. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  309. Published

    Optimization of bolt thread stress concentrations. / Pedersen, Niels Leergaard.

    In: Archive of Applied Mechanics, Vol. 83, No. 1, 2013, p. 1-14.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  310. Published

    Optimization of extraordinary optical absorption in plasmonic and dielectric structures. / Dühring, Maria Bayard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 30, No. 5, 2013, p. 1154-1160.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  311. Published

    Optimization of nonlinear structural vibrations using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  312. Published

    Overall bolt stress optimization. / Pedersen, Niels Leergaard.

    In: Journal of Strain Analysis for Engineering Design, Vol. 48, No. 3, 2013, p. 155-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  313. Published

    Parallel framework for topology optimization using the method of moving asymptotes. / Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 4, 2013, p. 493-505.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  314. Published

    Perfectly Matched Layer (PML) for Transient Wave Propagation in a Moving Frame of Reference. / Madsen, Stine Skov; Krenk, Steen; Hededal, Ole.

    Proceedings of the 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  315. Published

    Reflectance spectroscopy from TiO2 particles embedded in polyurethane. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede; Schou, Jørgen; Ambat, Rajan.

    Proceedings of EUROCORR 2013. European Federation of Corrosion, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  316. Published

    Reinforcement layout design for concrete structures based on continuum damage and truss topology optimization. / Amir, Oded; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 2, 2013, p. 157-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  317. Published

    Rigid Body Time Integration by Convected Base Vectors with Implicit Constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    COMPDYN 2013. 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. ed. / M. Papadrakakis; V. Papadopoulos; V. Plevris. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  318. Published

    Robust topology optimization accounting for geometric imperfections. / Schevenels, M.; Jansen, M.; Lombaert, Geert; Lazarov, Boyan Stefanov; Sigmund, Ole.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 4965-4972.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  319. Published

    Robust topology optimization accounting for misplacement of material. / Jansen, Miche; Lombaert, Geert; Diehl, Moritz; Lazarov, Boyan Stefanov; Sigmund, Ole; Schevenels, Mattias.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 3, 2013, p. 317-333.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  320. Published

    Roller chain drive vibration analysis based on a string model with boundaries moving non-smoothly. / Fuglede, Niels; Thomsen, Jon Juel.

    2013. Abstract from 3rd International Conference on Vibro Impact Systems and Systems with Non-smooth Interactions, Leinsweiler, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  321. Published

    Shape optimization of the stokes flow problem based on isogeometric analysis. / Park, Byong-Ug ; Seo, Yu-Deok ; Sigmund, Ole; Youn, Sung-Kie.

    In: Structural and Multidisciplinary Optimization, Vol. 48, 2013, p. 965-977.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  322. Published

    Statics and Mechanics of Structures. / Krenk, Steen; Høgsberg, Jan Becker.

    Springer Science+Business Media B.V., 2013. 506 p.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  323. Published

    Static strain and deformation controlled testing of composite beams. / Høgh, Jacob Herold; Waldbjørn, Jacob Paamand; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 6th International Conference on Composites Testing and Model Identification. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  324. Published

    Statistics of ductile fracture surfaces: the effect of material parameters. / Ponson, Laurent ; Cao, Yuanyuan ; Bouchaud, Elisabeth ; Tvergaard, Viggo; Needleman, Alan .

    In: International Journal of Fracture, Vol. 184, No. 1-2, 2013, p. 137-149.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  325. Published
  326. Published

    Structural Color Optimization using Scalar Diffraction Theory. / Johansen, Villads Egede; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  327. Published

    Structural eigenfrequency optimization based on local sub-domain "frequencies". / Pedersen, Pauli; Pedersen, Niels Leergaard.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  328. Published

    Structural Reliability of Wind Turbine Blades : Design Methods and Evaluation. / Dimitrov, Nikolay Krasimirov; Staerdahl, Jesper (Supervisor); Friis-Hansen, Peter (Supervisor); Berggreen, Christian (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 214 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  329. Published

    Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines. / Klit, Peder; Persson, Sebastian; Vølund, Anders.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  330. Published

    Testing of newly developed functional surfaces under pure sliding conditions. / Godi, Alessandro; Mohaghegh, Kamran; Grønbæk, J.; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 51, No. 1, 2013, p. 171-180.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  331. Published

    Theoretical modelling, analysis and validation of the shaft motion and dynamic forces during rotor–stator contact. / Lahriri, Said; Santos, Ilmar.

    In: Journal of Sound and Vibration, Vol. 332, No. 24, 2013, p. 6359-6376.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  332. Published

    Time-domain analysis of frequency dependent inertial wave forces on cylinders. / Krenk, Steen.

    In: Computers and Structures, Vol. 126, 2013, p. 184-192.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  333. Published

    Time-domain representation of frequency dependent inertial forces on offshore structures. / Krenk, Steen.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 1009-1016.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  334. Published

    Topological design of electromechanical actuators with robustness toward over- and under-etching. / Qian, Xiaoping ; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 253, 2013, p. 237–251.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  335. Published
  336. Published

    Topology Optimisation for Coupled Convection Problems. / Alexandersen, Joe; Andreasen, Casper Schousboe; Aage, Niels; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  337. Published

    Topology Optimisation for Coupled Convection Problems. / Alexandersen, Joe; Andreasen, Casper Schousboe; Aage, Niels; Lazarov, Boyan Stefanov; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: ResearchConference abstract for conference – Annual report year: 2013

  338. Published

    Topology optimization approaches : A comparative review. / Sigmund, Ole; Maute, Kurt.

    In: Structural and Multidisciplinary Optimization, Vol. 48, No. 6, 2013, p. 1031-1055.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  339. Published

    Topology optimization of fluid-structure-interaction problems in poroelasticity. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 258, 2013, p. 55-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  340. Published

    Topology Optimization of Stressed Capacitive RF MEMS Switches. / Philippine, Mandy A.; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 1, 2013, p. 206-215.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  341. Published

    Topology Optimization using an Explicit Interface Representation. / Christiansen, Asger Nyman; Nobel-Jørgensen, Morten; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  342. Published

    Topology optimized cloak for airborne sound. / Andkjær, Jacob Anders; Sigmund, Ole.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041011, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  343. Published

    Topology Optimized Mode Conversion In a Photonic Crystal Waveguide. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Ding, Yunhong; Sigmund, Ole; Yvind, Kresten.

    2013 IEEE Photonics Conference (IPC). IEEE, 2013. p. 333-334.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  344. Published

    Topology optimized RF MEMS switches. / Philippine, M. A.; Zareie, H.; Sigmund, Ole; Rebeiz, G. M.; Kenny, T. W.

    2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems. IEEE, 2013. p. 2477-2480.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  345. Published

    Tribology of a Combined Yaw Bearing and Brake. / Poulios, Konstantinos (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/2013.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  346. Published

    Using Data-Mining Approaches for Wind Turbine Power Curve Monitoring: A Comparative Study. / Schlechtingen, Meik; Santos, Ilmar; Achiche, Sofiane .

    In: I E E E Transactions on Sustainable Energy, Vol. 4, No. 3, 2013, p. 671-679.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  347. Published

    Wavelength Selective 3D Topology Optimized Photonic Crystal Devices. / Frandsen, Lars Hagedorn; Elesin, Yuriy; Sigmund, Ole; Jensen, Jakob Søndergaard; Yvind, Kresten.

    Proceedings of 2013 Conference on Lasers and Electro-Optics (CLEO). IEEE, 2013. CTh4L.6.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  348. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 1: System description. / Schlechtingen, Meik; Santos, Ilmar; Achiche, Sofiane.

    In: Applied Soft Computing, Vol. 13, 2013, p. 259-270.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  349. 2012
  350. Published

    A conservative quaternion-based time integration algorithm for rigid body rotations with implicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. ed. / K. Persson; J. Revstedt; G. Sandberg; M. Wallin. Lund University Faculty of Engineering, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  351. Published

    Acoustical topology optimization for Zwicker's loudness model - Application to noise barriers. / Kook, Junghwan; Koo, Kunmo; Hyun, Jaeyub; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 237-240, 2012, p. 130-151.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  352. Published

    A Family of Resonant Vibration Control Formats. / Krenk, Steen; Høgsberg, Jan Becker.

    2012. Paper presented at EACS 2012, Genoa, Italy.

    Publication: Research - peer-reviewPaper – Annual report year: 2012

  353. Published

    Afleveringer i løbet af semestret som driver for eksamensaktivitet. / Richelsen, Ann Bettina.

    2012. Abstract from DTU Undervisningsbiennale 2012 / DTU Teaching Biennial 2012, Kgs.Lyngby, Denmark.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  354. Published

    An Axial Sliding Test for machine elements surfaces. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    Proceedings of the 15th Nordic Symposium on Tribology . 2012.

    Publication: ResearchConference abstract in proceedings – Annual report year: 2012

  355. Published

    A topology optimization method based on the level set method for the design of negative permeability dielectric metamaterials. / Otomori, Masaki; Yamada, Takayuki; Izui, Kazuhiro; Nishiwaki, Shinji; Andkjær, Jacob.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 237-240, 2012, p. 192-211.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  356. Published

    Balanced calibration of resonant shunt circuits for piezoelectric vibration control. / Høgsberg, Jan; Krenk, Steen.

    In: Journal of Intelligent Material Systems and Structures, Vol. 23, No. 17, 2012, p. 1937-1948.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  357. Published

    Balanced Design of Resonant Shunted Piezoelectric Vibration Control. / Høgsberg, Jan Becker; Krenk, Steen.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  358. Published
  359. Published

    Bolt Thread Stress Optimization. / Pedersen, Niels Leergaard.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  360. Published

    Coefficient of Friction Measurements for Thermoplastics and Fiber Composites under Low Sliding Velocity and High Pressure. / Poulios, Konstantinos; Svendsen, G.; Hiller, Jochen; Klit, Peder.

    Proceedings of the 15th Nordic Symposium on Tribology . 2012.

    Publication: ResearchConference abstract in proceedings – Annual report year: 2012

  361. Published

    Cohesive traction–separation laws for tearing of ductile metal plates. / Nielsen, Kim Lau; Hutchinson, John W.

    In: International Journal of Impact Engineering, Vol. 48, 2012, p. 15-23.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  362. Published

    Cohesive Traction-Separation Laws for Tearing of Ductile Metal Plates. / Nielsen, Kim Lau; Hutchinson, J.W.

    Proceedings for 8th EUROMECH Solid Mechanics Conference (ESMC2012). 2012.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2012

  363. Published

    Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D. / Nielsen, Kim Lau; Dahl, Jonas; Tvergaard, Viggo.

    In: International Journal of Fracture, Vol. 177, No. 2, 2012, p. 97-108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  364. Published
  365. Published

    Condition monitoring with ordinary wind turbine SCADA data – A neuro-fuzzy approach. / Schlechtingen, Meik; Santos, Ilmar.

    2012. Paper presented at Offshore 2011, Amsterdam, Netherlands.

    Publication: ResearchPaper – Annual report year: 2012

  366. Published

    Condition monitoring with wind turbine SCADA data using Neuro-Fuzzy normal behavior models. / Schlechtingen, Meik; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 6 American Society of Mechanical Engineers, 2012. p. 717-726.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  367. Published

    Conservative integration of rigid body motion by quaternion parameters with implicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 92, No. 8, 2012, p. 734-752.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  368. Published

    Conservative Time-Integration of Rigid Body Motion with Implicit Constraints by Quaternion Parameters. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceeding of 8th European Solid Mechanics Conference. 2012.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2012

  369. Published

    Controllable Lubrication for Main Engine Bearings Using Mechanical and Piezoelectric Actuators. / Estupinan, Edgar; Santos, Ilmar.

    In: I E E E - A S M E Transactions on Mechatronics, Vol. 17, No. 2, 2012, p. 279-287.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  370. Published

    Debonding analyses in anisotropic materials with strain- gradient effects. / Legarth, Brian Nyvang.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. Lund University, 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  371. Published

    Debonding Analyses in Anisotropic Materials with Strain-Gradient Effects. / Legarth, Brian Nyvang.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics . 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  372. Published

    Design and Optimization of Gearless Drives using Multi-Physics Approach. / Andersen, Søren Bøgh; Santos, Ilmar (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2012. 251 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  373. Published

    Design of robust and efficient photonic switches using topology optimization. / Elesin, Yuriy; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Photonics and Nanostructures, Vol. 10, No. 1, 2012, p. 153-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  374. Published

    Dynamic Response to Pedestrian Loads with Statistical Frequency Distribution. / Krenk, Steen.

    In: Journal of Engineering Mechanics, Vol. 138, 2012, p. 1275-1281.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  375. Published

    Effect of Contact Conditions on Void Coalescence at Low Stress Triaxiality Shearing. / Dahl, Jonas; Nielsen, Kim Lau; Tvergaard, Viggo.

    In: Journal of Applied Mechanics, Vol. 79, No. 2, 2012, p. 021003.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  376. Published

    Effect of stress-state and spacing on voids in a shear-field. / Tvergaard, Viggo.

    In: International Journal of Solids and Structures, Vol. 49, No. 22, 2012, p. 3047-3054.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  377. Published

    Effect of viscoplastic material parameters on polymer indentation. / Tvergaard, V; Needleman, A.

    In: Modelling and Simulation in Materials Science and Engineering, Vol. 20, No. 6, 2012, p. Paper 065002.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  378. Published

    Effects of Uneven Interfacial Strength on Damage Evolution in Composites. / Ashouri Vajari, Danial; Legarth, Brian Nyvang; Niordson, Christian Frithiof.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  379. Published

    Efficient reanalysis techniques for robust topology optimization. / Amir, Oded; Sigmund, Ole; Lazarov, Boyan Stefanov; Schevenels, Mattias.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 245-246, 2012, p. 217-231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  380. Published

    Enhancing the Damping Properties of Viscoelastic Composites by Topology Optimization. / Andreasen, Casper Schousboe; Andreassen, Erik; Sigmund, Ole; Jensen, Jakob Søndergaard.

    2012. Abstract from 8th European Solid Mechanics Conference, Graz, Austria.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  381. Published

    Evolution strategies and multi-objective optimization of permanent magnet motor. / Andersen, Søren Bøgh; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 12, No. 2, 2012, p. 778-792.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  382. Published

    Experimental Bifurcation Analysis By Control-based Continuation - Determining Stability’. / Bureau, Emil; Santos, Ilmar; Thomsen, Jon Juel; Schilder, Frank; Starke, Jens.

    Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. p. DETC2012-70616.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  383. Published

    Experimental investigations of active air bearings. / Santos, Ilmar; Morosi, Stefano.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 901-910.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  384. Published
  385. Published

    Free Material Design with Multiple Load Cases. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. 2012.

    Publication: ResearchArticle in proceedings – Annual report year: 2012

  386. Published
  387. Published

    Fundamental limitations to gain enhancement in slow-light photonic structures. / Grgic, Jure; Ott, Johan Raunkjar; Wang, Fengwen; Sigmund, Ole; Jauho, Antti-Pekka; Mork, Jesper; Mortensen, N. Asger.

    2012 Conference on Lasers and Electro-Optics. Optical Society of America (OSA), 2012. (CLEO Technical Digest).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  388. Published
  389. Published
  390. Published
  391. Published

    Interactive topology optimization. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    2012. Abstract from 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  392. Published

    Interpolation/penalization applied for strength design of 3D thermoelastic structures. / Pedersen, Pauli; Pedersen, Niels L.

    In: Structural and Multidisciplinary Optimization, Vol. 45, No. 6, 2012, p. 773-786.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  393. Published

    Inverse design of dielectric materials by topology optimization. / Otomori, M.; Andkjær, Jacob Anders; Sigmund, Ole; Izui, K.; Nishiwaki, S.

    In: Progress in Electromagnetics Research, Vol. 127, 2012, p. 93-120.

    Publication: ResearchJournal article – Annual report year: 2012

  394. Published

    Investigation of Model Simplification and Its Influence on the Accuracy in FEM Magnetic Calculations of Gearless Drives. / Andersen, Søren Bøgh; Santos, Ilmar F.; Fuerst, Axel.

    In: I E E E Transactions on Magnetics, Vol. 48, No. 7, 2012, p. 2166-2177.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  395. Published

    Isogeometric Analysis and Shape Optimization in Fluid Mechanics. / Nielsen, Peter Nørtoft; Gravesen, Jens (Supervisor); Gersborg, Allan Roulund (Supervisor); Pedersen, Niels Leergaard (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2012. 143 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  396. Published

    Light Scattering of TiO2 Nanoparticles Embedded in Polyurethane. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede; Ambat, Rajan; Schou, Jørgen; Sigmund, Ole.

    2012. Abstract from Northern Optics 2012, Snekkersten, Denmark.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2012

  397. Published

    Macroscale mechanical domain parametric amplification: superthreshold pumping and optimal excitation parameters. / Neumeyer, Stefan; Thomsen, Jon Juel.

    EUROMECH Colloquium 532 : 1st International Colloquium on Time periodic systems (TPS). Current trends in theory and application. Technische Universität Darmstadt, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  398. Published

    Micromechanical modeling of damage in periodic composites using strain gradient plasticity. / Azizi, Reza.

    In: Engineering Fracture Mechanics, Vol. 92, 2012, p. 101-113.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  399. Published

    Modeling of dynamically loaded hydrodynamic bearings at low Sommerfeld numbers. / Thomsen, Kim; Klit, Peder (Supervisor); Vølund, Anders (Supervisor); Santos, Ilmar (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 218 p. (DCAMM Special Report; No. S144).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  400. Published

    Modelling and Control of Magnetorheological Damper : Real-time implementation and experimental verification. / Bhowmik, Subrata; Høgsberg, Jan Becker (Main supervisor); Krenk, Steen (Supervisor); Weber, Felix (Supervisor).

    DTU Mechanical Engineering, 2012. 198 p. (DCAMM Special Report; No. S139).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  401. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix; Pedersen, Niels Leergaard; Sørensen, Jens Nørkær.

    2012. Abstract from ICTAM 2012, Beijing, China.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  402. Published

    Multiscale modeling and topology optimization of poroelastic actuators. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Smart Materials and Structures, Vol. 21, No. 6, 2012, p. Paper 065005.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  403. Published

    On cavitation instabilities with interacting voids. / Tvergaard, Viggo.

    In: European Journal of Mechanics A - Solids, Vol. 32, 2012, p. 52-58.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  404. Published

    On size-effects in single crystal wedge indentation. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 18th International Symposium on Plasticity & Its Current Applications. NEAT Press, 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  405. Published

    On the nonlinear dynamics of two types of backup bearings - Theoretical and experimental aspects. / Lahriri, Said; Santos, Ilmar F.; Weber, Hans I.; Hartmann, Henning.

    In: Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 11, 2012, p. Paper 112503.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  406. Published

    On the nonlinear dynamics of two types of backup bearings - Theoretical and experimental aspects. / Lahriri, Said; Santos, Ilmar; Hartmann, Henning; Weber, Hans I.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 805-821.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  407. Published

    On the Rotor to Stator Contact Dynamics with Impacts and Friction - Theoretical and Experimental Study. / Lahriri, Said; Santos, Ilmar (Main supervisor); Hartmann, Henning (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2012. 195 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  408. Published

    On the simplifications for the thermal modeling of tilting-pad journal bearings under thermoelastohydrodynamic regime. / Cerda Varela, Alejandro Javier; Fillon, Michel; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 7 Parts A and B. ed. American Society of Mechanical Engineers, 2012. p. 823-835.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  409. Published

    Optimal Brain Surgeon on Artificial Neural Networks in. / Christiansen, Niels Hørbye; Job, Jonas Hultmann; Klyver, Katrine; Høgsberg, Jan Becker.

    Proceedings of the 25th Nordic Seminar on Computational Mechanics. 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  410. Published

    Optimized manufacturable porous materials. / Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard; Sigmund, Ole.

    2012. Abstract from APM 2012 Advanved Problems in Mechanics, Saint Petersburg, Russian Federation.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  411. Published

    Optimizing the microstructure of dissipative materials. / Andreassen, Erik; Lazarov, Boyan Stefanov; Jensen, Jakob Søndergaard.

    2012. Paper presented at International Workshop on Computational Mechanics of Materials, Baltimore, MD, United States.

    Publication: ResearchPaper – Annual report year: 2012

  412. Published

    Parallel Sparse Matrix - Vector Product : Pure MPI and hybrid MPI-OpenMP implementation. / Alexandersen, Joe; Lazarov, Boyan Stefanov; Dammann, Bernd.

    Kgs. Lyngby : Technical University of Denmark, 2012. 61 p. (I M M-T R; No. 2012-10).

    Publication: ResearchReport – Annual report year: 2012

  413. Published

    Parametric Study of the Device Angle Dependency of a Single Vortex Generator on a Flat Plate. / Fernandez, U.; Réthoré, Pierre-Elouan; Sørensen, Niels N.; Velte, Clara Marika; Zahle, Frederik; Egusquiza, E.

    2012. Paper presented at 10th World Congress on Computational Mechanics (WCCM 2012), Sao Paulo, Brazil.

    Publication: Research - peer-reviewPaper – Annual report year: 2012

  414. Published

    Performance Improvement of tilting-pad journal bearings by means of controllable lubrication. / Cerda, Alejandro; Santos, Ilmar.

    In: Mechanics & Industry, Vol. 13, No. 1, 2012, p. 17-32.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  415. Published

    Plasmonic versus dielectric enhancement in thin-film solar cells. / Dühring, Maria Bayard; Mortensen, N. Asger; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 100, No. 21, 2012, p. 211914.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  416. Published

    Prediction of Ductile Fracture Surface Roughness Scaling. / Needleman, Alan; Tvergaard, Viggo; Bouchaud, Elisabeth.

    In: Journal of Applied Mechanics, Vol. 79, No. 3, 2012, p. Paper 031015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  417. Published

    Radial oil injection applied to main engine bearings: evaluation of injection control rules. / Estupiñan, EA; Santos, Ilmar.

    In: Journal of Vibration and Control, Vol. 18, No. 5, 2012, p. 587-595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  418. Published
  419. Published

    Reduction of initial stress stiffening by topology optimization. / Philippine, M. A.; Sigmund, Ole; Rebeiz, G. M.; Kenny, T. W.

    Proceedings of 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP). IEEE, 2012. p. 148-153.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  420. Published

    Rezimy obtekanija vichrevogo generatora. / Velte, Clara Marika; Okulov, Valery; Naumov, I.V.

    In: Technical Physics Letters, Vol. 38, No. 8, 2012, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  421. Published

    Robust topology design of periodic grating surfaces. / Friis, Kasper Storgaard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 29, No. 10, 2012, p. 2935-2943.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  422. Published

    Rotor–stator contact dynamics using a non-ideal drive : Theoretical and experimental aspects. / Lahriri, Said; Weber, H.I.Hans I.; Santos, I.F.Ilmar F.; Hartmann, Henning.

    In: Journal of Sound and Vibration, Vol. 331, No. 20, 2012, p. 4518-4536.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  423. Published

    Sensitivity filtering from a continuum mechanics perspective. / Sigmund, Ole; Maute, Kurt.

    In: Structural and Multidisciplinary Optimization, Vol. 46, No. 4, 2012, p. 471-475.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  424. Published
  425. Published

    Steady State Crack Propagation in Layered Material Systems Displaying Visco-plastic Behaviour. / Nielsen, Kim Lau.

    Proceedings for 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012). 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  426. Published
  427. Published

    Structural Optimization of Wind Turbine Rotor Blades by Multi-Level Sectional/Multibody/3DFEM Analysis. / Bottasso, C. L.; Campagnolo, F.; Croce, A.; Dilli, S.; Gualdoni, F.; Nielsen, Martin Bjerre.

    Politecnico Di Milano, 2012. 27 p.

    Publication: Research - peer-reviewReport – Annual report year: 2012

  428. Published
  429. Published

    Systematic Design of Slow Light Waveguides. / Wang, Fengwen; Jensen, Jakob Søndergaard (Supervisor); Sigmund, Ole (Supervisor); Mørk, Jesper (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 166 p. (DCAMM Special Report; No. S145).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  430. Published

    System reliability effects in wind turbine blades. / Dimitrov, Nikolay Krasimirov; Friis-Hansen, Peter; Berggreen, Christian.

    Proceedings of IFIP WG7.5 Working Conference on Reliability and Optimization of Structural Systems. IFIP, 2012. p. 183-190.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  431. Published
  432. Published

    Theoretical and Experimental Investigation of Force Estimation Errors Using Active Magnetic Bearings with Embedded Hall Sensors. / Voigt, Andreas Jauernik; Santos, Ilmar.

    Proceedings of ASME Turbo Expo 2012. Vol. 7, Parts A and B American Society of Mechanical Engineers, 2012. p. 779-793.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  433. Published

    Topology optimization considering material and geometric uncertainties using stochastic collocation methods. / Lazarov, Boyan Stefanov; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 46, No. 4, 2012, p. 597-612.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  434. Published

    Topology optimization of antennas and resonators. / Aage, Niels; Sigmund, Ole.

    2012. Paper presented at 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan.

    Publication: ResearchPaper – Annual report year: 2012

  435. Published

    Topology optimization of nano-photonic systems. / Elesin, Yuriy; Wang, Fengwen; Andkjær, Jacob Anders; Jensen, Jakob Søndergaard; Sigmund, Ole.

    Advanced Photonics Congress. Optical Society of America, 2012. p. IM2B.4.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  436. Published

    Topology optimization of optical surfaces. / Friis, Kasper Storgaard; Sigmund, Ole.

    2012. Poster session presented at PECS-X: 10th International Symposium on Photonic and Electromagnetic Crystal Structures, Santa Fe, NM, United States.

    Publication: ResearchPoster – Annual report year: 2012

  437. Published

    Topology optimization with geometric uncertainties by perturbation techniques. / Lazarov, Boyan Stefanov; Schevenels, M.; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 90, No. 11, 2012, p. 1321-1336.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  438. Published

    Towards all-dielectric, polarization-independent optical cloaks. / Andkjær, Jacob Anders; Mortensen, N. Asger; Sigmund, Ole.

    In: Applied Physics Letters, Vol. 100, No. 10, 2012, p. Paper 101106.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  439. Published

    Vibrations of axially moving strings with in-plane oscillating supports. / Fuglede, Niels; Thomsen, Jon Juel.

    2012. Abstract from EUROMECH Colloquium 532 , Darmstadt, Germany.

    Publication: ResearchConference abstract for conference – Annual report year: 2012

  440. Published

    Wave Manipulation by Topology Optimization. / Andkjær, Jacob Anders; Sigmund, Ole (Supervisor); Breinbjerg, Olav (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 116 p. (DCAMM Special Report; No. S140).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  441. 2011
  442. Published
  443. Published

    Automated Design of Advanced Mechatronic Systems. / Dupuis, Jean-Francois; Fan, Zhun (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  444. Published

    Shallow Water Tuned Liquid Dampers : Modeling, simulation and experiments. / Krabbenhøft, Jørgen; Georgakis, Christos T. (Supervisor); Santos, Ilmar (Supervisor); Poulsen, Peter Noe (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  445. Published

    Active lubrication applied to radial gas journal bearings. Part 1: Modeling. / Morosi, Stefano; Santos, Ilmar.

    In: Tribology International, Vol. 44, No. 12, 2011, p. 1949-1958.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  446. Published

    An explicit parameterization for casting constraints in gradient driven topology optimization. / Gersborg, Allan Roulund; Andreasen, Casper Schousboe.

    In: Structural and Multidisciplinary Optimization, Vol. 44, No. 6, 2011, p. 875-881.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  447. Published

    A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing. / Thomsen, Kim; Klit, Peder.

    In: Tribology International, Vol. 44, No. 12, 2011, p. 1872-1877.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  448. Published

    Basic Strain Gradient Plasticity Theories with Application to Constrained Film Deformation. / Niordson, Christian Frithiof; Hutchinson, John W.

    In: Journal of Mechanics of Materials and Structures, Vol. 6, No. 1-4, 2011, p. 395-416.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  449. Published
  450. Published

    Comparison between different dispersion engineering methods in slow light photonic crystal waveguides. / Wang, Fengwen; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: AIP Conference Proceedings, Vol. 1398, 2011, p. 180-182.

    Publication: Research - peer-reviewConference article – Annual report year: 2011

  451. Published

    Computational Strain Gradient Crystal Plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 17th International Symposium on Plasticity & Its Current Applications. NEAT Press, 2011. p. 13-15.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  452. Published

    Design objectives with non-zero prescribed support displacements. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 2, 2011, p. 205-214.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  453. Published
  454. Published
  455. Published

    Efficient Reanalysis Procedures in Structural Topology Optimization. / Amir, Oded; Stolpe, Mathias (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 155 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  456. Published

    Efficient topology optimization in MATLAB using 88 lines of code. / Andreassen, Erik; Clausen, Anders; Schevenels, Mattias; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 1, 2011, p. 1-16.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  457. Published

    Elastic–plastic void expansion in near-self-similar shapes. / Tvergaard, Viggo.

    In: Computational Materials Science, Vol. 50, No. 11, 2011, p. 3105-3109.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  458. Published

    Enforsing a system approach to composite failure criteria for reliability analysis. / Dimitrov, Nikolay Krasimirov; Friis-Hansen, Peter; Berggreen, Christian.

    Proceedings of the 18th International Conference on Composite Materials (ICCM). 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  459. Published

    Experimental bifurcation analysis for a driven nonlinear flexible pendulum using control-based continuation. / Bureau, Emil; Schilder, Frank; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  460. Published

    Experimental bifurcation by using control-based continuation. / Bureau, Emil (Author); Santos, Ilmar (Author); Thomsen, Jon Juel (Author); Starke, Jens (Author); Schilder, Frank (Author); Elmegård, Michael (Author).

    2011. DCAMM 13th internal Symposium, Vejle, 01/01/2011.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2011

  461. Published
  462. Published

    Factorized parallel preconditioner for the saddle point problem. / Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: International Journal for Numerical Methods in Biomedical Engineering, Vol. 27, No. 9, 2011, p. 1398-1410.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  463. Published
  464. Published

    Filters in topology optimization based on Helmholtz‐type differential equations. / Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 86, No. 6, 2011, p. 765-781.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  465. Published

    From Hybrid to Actively-Controlled Gas Lubricated Bearings – Theory and Experiment. / Morosi, Stefano; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2011. 279 p. (DCAMM Special Report; No. S137).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  466. Published

    Guiding Simulations and Experiments using Continuation. / Bureau, Emil (Author); Schilder, Frank (Author); Avrutin, Viktor (Author); Starke, Jens (Author); Santos, Ilmar (Author); Thomsen, Jon Juel (Author).

    2011. School and Conference on Computational Methods in Dynamics, Trieste, Italy, 01/01/2011.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2011

  467. Published

    Isogeometric shape optimization of photonic crystals via Coons patches. / Qian, Xiaoping; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, No. 25-28, 2011, p. 2237-2255.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  468. Published

    Life expectancy of modular Ti6Al4V hip implants: Influence of stress and environment. / Chandra, A.; Ryu, J.J.; Karra, P.; Shrotriya, P.; Tvergaard, Viggo; Gaisser, M.; Weik, T.

    In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 4, No. 8, 2011, p. 1990-2001.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  469. Published

    Low-dimensional approximations for Finite Element Models of mechanical systems. / Elmegaard, Michael; Starke, Jens; Schilder, Frank; Thomsen, Jon Juel.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  470. Published

    Maximizing opto‐mechanical interaction using topology optimization. / Gersborg, Allan Roulund; Sigmund, Ole.

    In: International Journal for Numerical Methods in Engineering, Vol. 87, No. 9, 2011, p. 822-843.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  471. Published

    Measuring student performance in an international MSc programme. / Richelsen, Ann Bettina.

    ICEE2011: Engineering Sustainability for a Global Economy. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  472. Published

    Minimal compliance design for metal–ceramic composites with lamellar microstructures. / Piat, R.; Sinchuk, Y.; Vasoya, M.; Sigmund, Ole.

    In: Acta Materialia, Vol. 59, No. 12, 2011, p. 4835-4846.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  473. Published

    Modelling of Active Semiconductor Photonic Crystal Waveguides and Robust Designs based on Topology Optimization. / Chen, Yaohui (Invited author); Wang, Fengwen (Invited author); Ek, Sara (Invited author); Jensen, Jakob Søndergaard (Invited author); Sigmund, Ole (Invited author); Mørk, Jesper (Invited author).

    2011 13th International Conference on Transparent Optical Networks (ICTON). IEEE, 2011. p. We.C4.1 (Uden navn).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  474. Published

    Multi-scale modeling of composites. / Azizi, Reza; Niordson, Christian Frithiof (Supervisor); Legarth, Brian Nyvang (Supervisor); Tvergaard, Viggo (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. (DCAMM Special Report; No. S135).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  475. Published

    Multiscale optimization of saturated poroelastic actuators. / Andreasen, Casper Schousboe; Sigmund, Ole.

    2011. Abstract from EUROMECH 522 Colloquium, Erlangen, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2011

  476. Published

    Multiscale topology optimization of solid and fluid structures. / Andreasen, Casper Schousboe; Sigmund, Ole (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 158 p. (DCAMM Special Report; No. S131).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  477. Published

    Nonlinear Study of Industrial Arc Spring Dampers. / Lahriri, Said (Invited author); Santos, Ilmar (Invited author); Hartmann, Henning (Invited author).

    Proceedings of the 14. International Symposium on Dynamic Problems of Mechanics. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  478. Published

    On Controllable Elastohydrodynamic Fluid Film Bearings. / Haugaard, Martin Asger; Klit, Peder (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 182 p. (DCAMM Special Report; No. S125).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  479. E-pub ahead of print

    On projection methods, convergence and robust formulations in topology optimization. / Wang, Fengwen; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 6, 2011, p. 767-784.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  480. Published

    On reducing computational effort in topology optimization: how far can we go?. / Amir, Oded; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 44, No. 1, 2011, p. 25-29.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  481. Published

    On the future of controllable fluid film bearings. / Santos, Ilmar.

    In: Mecanique et Industries, Vol. 12, No. 4, 2011, p. 275.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  482. Published
  483. Published

    On the nonlinear design of industrial arc spring dampers. / Lahriri, Said (Invited author); Santos, Ilmar (Invited author); Hartmann, Henning (Invited author).

    SIRM 2011. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  484. Published

    On the usefulness of non-gradient approaches in topology optimization. / Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 5, 2011, p. 589-596.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  485. Published

    Optimization of straight-sided spline design. / Pedersen, Niels Leergaard.

    In: Archive of Applied Mechanics, Vol. 81, No. 10, 2011, p. 1393-1407.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  486. Published

    Optimized designs for 2D and 3D thermoelastic structures. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  487. Published

    Perforator and assembly for perforating and providing an opening. / Klit, Peder (Inventor); Klit, Anders (Inventor).

    Patent No.: WO 2011073249. Jun 23, 2011.

    Publication: ResearchPatent – Annual report year: 2011

  488. E-pub ahead of print

    Polymer indentation: Numerical analysis and comparison with a spherical cavity model. / Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 59, No. 9, 2011, p. 1669-1684.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  489. E-pub ahead of print

    Predicting phase shift effects for vibrating fluid-conveying pipes due to Coriolis forces and fluid pulsation. / Enz, Stephanie; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 330, No. 21, 2011, p. 5096-5113.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  490. Published

    Robust design of large-displacement compliant mechanisms. / Lazarov, Boyan Stefanov; Schevenels, M.; Sigmund, Ole.

    In: Mechanical Sciences, Vol. 2, No. 2, 2011, p. 175-182.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  491. Published

    Robust topology optimization accounting for spatially varying manufacturing errors. / Schevenels, M.; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, No. 49-52, 2011, p. 3613-3627.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  492. Published
  493. Published

    Roller chain drive analysis: simplified modeling and analysis of the dynamic effects of meshing. / Fuglede, Niels; Thomsen, Jon Juel.

    7th European Nonlinear Dynamics Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  494. Published

    Saturated poroelastic actuators generated by topology optimization. / Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 43, No. 5, 2011, p. 693-706.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  495. Published

    Size-effects on yield surfaces for micro reinforced composites. / Azizi, Reza; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 27, No. 11, 2011, p. 1817-1832.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  496. Published

    Static, Dynamic, and Thermal Properties of Compressible Fluid Film Journal Bearings. / Paulsen, Bo Terp; Morosi, Stefano; Santos, Ilmar.

    In: Tribology Transactions, Vol. 54, No. 2, 2011, p. 282-299.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  497. Published

    Stiffness and design for strength of trapezoidal Belleville springs. / Pedersen, Niels Leergaard; Pedersen, Pauli.

    In: Journal of Strain Analysis for Engineering Design, Vol. 46, No. 8, 2011, p. 825-836.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  498. Published

    Straight-sided Spline Optimization. / Pedersen, Niels Leergaard.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: ResearchArticle in proceedings – Annual report year: 2011

  499. Published

    Student performance in a newly developed MSc programme. / Richelsen, Ann Bettina.

    SEFI 2011 Annual Conference. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  500. E-pub ahead of print

    Systematic design of slow-light photonic waveguides. / Matzen, René; Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 28, No. 10, 2011, p. 2374-2382.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  501. Published
  502. Published

    Topology Optimization for Conceptual Design of Reinforced Concrete Structures. / Amir, Oded; Bogomolny, Michael.

    9th World Congress on Structural and Multidisciplinary Optimization. 2011.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2011

  503. Published

    Topology Optimization for Convection Problems. / Alexandersen, Joe.

    2011. 97 p.

    Publication: ResearchReport – Annual report year: 2011

  504. Published

    Topology optimization for nano-photonics. / Jensen, Jakob Søndergaard; Sigmund, Ole.

    In: Laser & Photonics Reviews, Vol. 5, No. 2, 2011, p. 308-321.

    Publication: Research - peer-reviewJournal article – Annual report year: 2011

  505. Published

    Topology Optimization for Transient Wave Propagation Problems. / Matzen, René; Sigmund, Ole (Supervisor); Jensen, Jakob Søndergaard (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 198 p. (DCAMM Special Report; No. S130).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  506. Published

    Topology Optimization of Nanophotonic Devices. / Yang, Lirong; Hvam, Jørn Märcher (Supervisor); Sigmund, Ole (Supervisor); Lavrinenko, Andrei (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 105 p. (FOTONIK-PHD).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

Previous 1 2 3 Next
Download list: To download, please limit the number of search results to 1,000 or less.