1. 2015
  2. E-pub ahead of print
  3. Published

    Combined shape and topology optimization of 3D structures. / Christiansen, Asger Nyman; Bærentzen, Jakob Andreas; Nobel-Jørgensen, Morten; Aage, Niels; Sigmund, Ole.

    In: Computers & Graphics, Vol. 46, 2015, p. 25-35.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  4. Published

    Directional bending wave propagation in periodically perforated plates. / Andreassen, Erik; Manktelow, Kevin ; Ruzzene, Massimo .

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 187–203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  5. Published
  6. Published

    Eigenfrequency optimized 3D continua, with possibility for cavities. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Journal of Sound and Vibration, Vol. 341, 2015, p. 100–115.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  7. Published

    Optimization of nonlinear structural resonance using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    In: Journal of Sound and Vibration, Vol. 334, 2015, p. 239–254.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  8. Published
  9. Published

    Strain gradient crystal plasticity: A continuum mechanics approach to modeling micro-structural evolution. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau; Niordson, Christian Frithiof.

    Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling: Proceedings of PLASTICITY ’15. ed. / Akhtar S. Khan. NEAT Press, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  10. Published

    The effect of loading rate on ductile fracture toughness and fracture surface roughness. / Osovski, S.; Srivastava, Akhilesh Kumar; Ponson, L.; Bouchaud, E.; Tvergaard, Viggo; Ravi-Chandar, K.; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 76, 2015, p. 20-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  11. Published

    Vibration suppression for strings with distributed loading using spatial cross-section modulation. / Sorokin, Vladislav; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 66–77.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  12. 2014
  13. E-pub ahead of print
  14. Published

    Advanced Topology Optimization Methods for Conceptual Architectural Design. / Aage, Niels; Amir, Oded; Clausen, Anders; Hadar, Lior ; Maier, Dana ; Søndergaard, Asbjørn .

    Advances in Architectural Geometry 2014. ed. / P. Block; J. Knippers; N.J. Mitra; W. Wang. Springer, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  15. Published

    Analysis of enhanced modal damping ratio in porous materials using an acoustic-structure interaction model. / Kook, Junghwan; Jensen, Jakob Søndergaard.

    In: A I P Advances, Vol. 4, No. 12, 2014, p. 124304.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  16. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  17. Published
  18. Published

    Analytical sensitivity analysis and topology optimization of nonlinear resonant structures with hardening and softening behavior. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Abstract from 17th U.S. National Congress on Theoretical and Applied Mechanics, East Lansing, Michigan, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  19. Published
  20. Published
  21. Published

    A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. / Ashouri Vajari, Danial; González, Carlos; Llorca, Javier; Legarth, Brian Nyvang.

    In: Composites Science and Technology, Vol. 97, 2014, p. 46-54.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published
  23. Published
  24. Published

    Application of finite elements and computational fluid dynamics to predict and improve the filling ratio in journal bearings under dynamic loading. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of NSCM-27: the 27th Nordic Seminar on Computational Mechanics. ed. / A. Eriksson; A. Kulachenko; M. Mihaescu; G. Tibert. 2014. (TRITA-MEK Technical report; No. 2014:24).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  25. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  26. Published

    Bend-twist coupling potential of wind turbine blades. / Fedorov, Vladimir; Berggreen, Christian.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012035, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  27. Published

    Bifurcation analysis of a smoothed model of a forced impacting beam and comparison with an experiment. / Elmegård, Michael; Krauskopf, B.; Osinga, H.M.; Starke, Jens; Thomsen, Jon Juel.

    In: Nonlinear Dynamics, Vol. 77, 2014, p. 951–966.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  28. Published

    Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids. / Tvergaard, Viggo.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 112-122.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. Published

    Cavitation analysis of a journal bearing - Finite Element modelling and experimental studies. / Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore; Vølund, Anders.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. ed. / Lars Pleth Nielsen; Ion Marius Sivebæk; Svend Stensig Eskildsen; Sascha Louring; Lone Elly Larsen. Danish Technological Institute, 2014. p. 81.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  30. Published

    Characterizing and Modeling Brittle Bi-material Interfaces Subjected to Shear. / Anyfantis, Konstantinos; Berggreen, Christian.

    In: Applied Composite Materials, Vol. 21, 2014, p. 905–919.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  31. Submitted

    Combined Shape and Topology Optimization. / Christiansen, Asger Nyman; Bærentzen, Jakob Andreas (Supervisor); Sigmund, Ole (Supervisor).

    Kgs. Lyngby : Technical University of Denmark (DTU), 2014. 131 p. (DTU Compute PHD-2014; No. 350).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  32. Published

    Combined shape and topology optimization for minimization of von Mises Stress. / Christiansen, Asger Nyman; Tortorelli, Daniel A.; Aage, Niels; Sigmund, Ole.

    2014. Abstract from 4th International Conference on Engineering Optimization, Lisbon, Portugal.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  33. Published

    Comparing the Gauss-Seidel and Jacobi Relaxation Schemes in the Solution of the EHL Line Contact Problem Using a Multigrid solver. / Janakiraman, Shravan; Klit, Peder.

    2014. Paper presented at 16th Nordic Symposium on Tribology, Aarhus, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  34. Published
  35. Published

    Comparison of Four Numerical Methods of EHL Modeling. / Janakiraman, Shravan; Klit, Peder.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014. p. 83.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  36. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  39. Published

    CONTINEX: A Toolbox for Continuation in Experiments. / Schilder, Frank; Bureau, Emil; Santos, Ilmar; Thomsen, Jon Juel; Starke, Jens.

    Proceedings of the 8th European Nonlinear Dynamics Conference (ENOC 2014). Technische Universität Wien, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  40. Published
  41. Published

    Damping of Offshore Wind Turbine Tower Vibrations by a Stroke Amplifying Brace. / Brodersen, Mark Laier; Høgsberg, Jan Becker.

    In: Energy Procedia, Vol. 53, 2014, p. 258-267.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  42. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  43. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  44. Published

    Design of material anisotropy constitutive matrices for structural stiffness and strength optimization. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    Engineering Optimization IV. ed. / H.C. Rodrigues. C R C Press LLC, 2014. p. 169-173.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  45. Published

    Design of materials with prescribed nonlinear properties. / Wang, Fengwen; Sigmund, Ole; Jensen, Jakob Søndergaard.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 156-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  46. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  47. E-pub ahead of print
  48. Published
  49. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  50. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  51. E-pub ahead of print
  52. E-pub ahead of print

    Experimental and theoretical analysis of a rigid rotor supported by air foil bearings. / Larsen, Jon Steffen; Hansen, Asger J. T. ; Santos, Ilmar.

    In: Mechanics & Industry, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

Previous 1 2 3 4 5 6 7 8 ...21 Next
Download list: To download, please limit the number of search results to 1,000 or less.