1. 2014
  2. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published
  4. Published

    Analytical sensitivity analysis and topology optimization of nonlinear resonant structures with hardening and softening behavior. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Abstract from 17th U.S. National Congress on Theoretical and Applied Mechanics, East Lansing, Michigan, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  5. Published
  6. Published
  7. Published

    A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. / Ashouri Vajari, Danial; González, Carlos; Llorca, Javier; Legarth, Brian Nyvang.

    In: Composites Science and Technology, Vol. 97, 2014, p. 46-54.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  8. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  9. Published

    Bend-twist coupling potential of wind turbine blades. / Fedorov, Vladimir; Berggreen, Christian.

    In: Journal of Physics: Conference Series (Online), Vol. 524, No. 1, 012035, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  10. Published

    Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids. / Tvergaard, Viggo.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 112-122.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  11. Published
  12. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  13. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  15. Published
  16. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  17. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    Design of materials with prescribed nonlinear properties. / Wang, Fengwen; Sigmund, Ole; Jensen, Jakob Søndergaard.

    In: Journal of the Mechanics and Physics of Solids, Vol. 69, No. 1, 2014, p. 156-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  19. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. Published
  21. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  23. E-pub ahead of print
  24. Published

    Experimental Bifurcation Analysis Using Control-Based Continuation. / Bureau, Emil; Santos, Ilmar (Main supervisor); Thomsen, Jon Juel (Supervisor); Starke, Jens.

    DTU Mechanical Engineering, 2014. 145 p. (DCAMM Special Report; No. S163).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  25. Published

    Explicit free‐floating beam element. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 98, No. 1, 2014, p. 59-78.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  26. Published
  27. Published

    Extended neural network-based scheme for real-time force tracking with magnetorheological dampers. / Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker.

    In: Structural Control and Health Monitoring, Vol. 21, No. 2, 2014, p. 225–247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  28. Published

    Face/core mixed mode debond fracture toughness characterization using the modified TSD test method. / Berggreen, Christian; Quispitupa, Amilcar; Costache, Andrei; Carlsson, Leif A.

    In: Journal of Composite Materials, Vol. 48, No. 16, 2014, p. 1939-1945.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. Published

    Feedback-Controlled Lubrication for Reducing the Lateral Vibration of Flexible Rotors supported by Tilting-Pad Journal Bearings. / Salazar, Jorge Andrés González; Santos, Ilmar.

    Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Danish Technological Institute, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  30. Published

    How to determine composite material properties using numerical homogenization. / Andreassen, Erik; Andreasen, Casper Schousboe.

    In: Computational Materials Science, Vol. 83, 2014, p. 488-495.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  31. Published
  32. Published
  33. Published

    Jumps and bi-stability in the phase-gain characteristics of a nonlinear parametric amplifier. / Neumeyer, Stefan; van de Looij, Ruud ; Thomsen, Jon Juel.

    ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference. ed. / Horst Ecker; Alois Steindl; Stefan Jakubek. Vienna University of Technology, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  34. Published

    Nonlinear dynamics of a pseudoelastic shape memory alloy system - theory and experiment. / Enemark, Søren; A Savi, M.; Santos, Ilmar.

    In: Smart Materials and Structures, Vol. 23, No. 8, 085018, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  35. Published

    Numerical and experimental investigation of bump foil mechanical behaviour. / Larsen, Jon Steffen; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Tribology International, Vol. 74, 2014, p. 46–56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  36. Published

    Numerical simulation of cropping. / Tvergaard, Viggo; Hutchinson, John W.

    In: Journal of Applied Mechanics, Vol. 81, No. 7, 071002, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    On gear tooth stiffness evaluation. / Pedersen, Niels Leergaard; Jørgensen, Martin Felix.

    In: Computers & Structures, Vol. 135, 2014, p. 109-117.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    On the homogenization of metal matrix composites using strain gradient plasticity. / Azizi, Reza; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: Acta Mechanica Sinica, Vol. 30, No. 2, 2014, p. 175-190.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  39. Published
  40. Published

    Optical role of randomness for structured surfaces. / Johansen, Villads Egede.

    In: Applied Optics, Vol. 53, No. 11, 2014, p. 2405-2415.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  41. Published

    Optimal design of hardening and softening resonances of plane frame structures : Extended abstract. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Paper presented at 8th European Nonlinear Dynamics Conference, Vienna, Austria.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  42. Published
  43. Published

    Sub-surface Fatigue Crack Growth at Alumina Inclusions in AISI 52100 Roller Bearings. / Cerullo, Michele.

    In: Procedia Engineering, Vol. 74, 2014, p. 333-338.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  44. Published
  45. Published

    Topology optimization for optical projection lithography with manufacturing uncertainties. / Zhou, Mingdong; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Applied Optics, Vol. 53, No. 12, 2014, p. 2720-2729.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  46. Published

    Topology optimization of fail-safe structures using a simplified local damage model. / Jansen, Miche; Lombaert, Geert; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 4, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  47. Published
  48. E-pub ahead of print

    Topology optimization with flexible void area. / Clausen, Anders; Aage, Niels; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  49. Published

    Topology-optimized broadband surface relief transmission grating. / Andkjær, Jacob; Ryder, Christian P.; Nielsen, Peter C.; Rasmussen, Thomas; Buchwald, Kristian; Sigmund, Ole.

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8980, 898006, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  50. Published
  51. Published

    Tuned mass absorber on a flexible structure. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Sound and Vibration, Vol. 333, No. 6, 2014, p. 1577-1595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  52. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 2: Application examples. / Schlechtingen, Meik; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 14, 2014, p. 447-460.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  53. 2013
  54. Published

    A 2D finite element implementation of the Fleck–Willis strain-gradient flow theory. / Nielsen, Kim Lau; Niordson, Christian Frithiof.

    In: European Journal of Mechanics A - Solids, Vol. 41, 2013, p. 134-142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  55. Published

    Acoustical topology optimization of Zwicker's loudness with Padé approximation. / Kook, Junghwan; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 255, 2013, p. 40-66.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  56. Published

    Actively lubricated bearings applied as calibrated shakers to aid parameter identification in rotordynamics. / Santos, Ilmar; Cerda Varela, Alejandro Javier.

    Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 7B American Society of Mechanical Engineers, 2013. GT2013-95674.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  57. Published

    A deformation mechanism map for polycrystals modeled using strain gradient plasticity and interfaces that slide and separate. / Dahlberg, Carl F.O.; Faleskog, Jonas; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 43, 2013, p. 177-195.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  58. Published

    Adjustable ETHD lubrication applied to the improvement of dynamic performance of flexible rotors supported by active TPJB. / Salazar, Jorge Andrés González; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  59. Published

    Aerodynamic and Mechanical System Modelling. / Jørgensen, Martin Felix; Pedersen, Niels Leergaard (Main supervisor); Sørensen, Jens Nørkær (Supervisor).

    Technical University of Denmark. Department of Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S160).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  60. Published

    A global condition monitoring system for wind turbines. / Schlechtingen, Meik; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S150).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  61. Published

    Analysis of phononic bandgap structures with dissipation. / Andreassen, Erik; Jensen, Jakob Søndergaard.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041015, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  62. Published
  63. Published

    A New Rig for Testing Textured Surfaces in Pure Sliding Conditions. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 50, No. 3, 2013, p. 397-405.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  64. Published
  65. Published

    A Vortex Generator Flow Model Based on Self-Similarity : Technical notes. / Velte, Clara Marika.

    In: AIAA Journal, Vol. 51, No. 2, 2013, p. 526-529.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  66. Published

    Beam section stiffness properties usig 3D finite elements. / Couturier, Philippe; Krenk, Steen; Høgsberg, Jan Becker.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  67. Published

    Characterisation and Testing of Multifunctional Surfaces. / Godi, Alessandro; De Chiffre, Leonardo (Main supervisor); Hansen, Hans Nørgaard (Supervisor); Klit, Peder (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 290 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  68. Published
  69. Published

    Compliant Foil Journal Bearings - Investigation of Dynamic Properties. / Larsen, Jon Steffen; Santos, Ilmar.

    2013. Paper presented at SIRM 2013 , Berlin, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  70. Published

    Design and Optimization of Gearless Drives using Multi-Physics Approach. / Andersen, Søren Bøgh; Santos, Ilmar (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 251 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  71. Published
  72. Published

    Dynamics of Rigid Bodies and Flexible Beam Structures. / Nielsen, Martin Bjerre; Krenk, Steen (Main supervisor).

    DTU Mechanical Engineering, 2013. (DCAMM Special Report; No. S156).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  73. Published

    Efficient Mooring Line Fatigue Analysis Using a Hybrid Method Time Domain Simulation Scheme. / Christiansen, Niels Hørbye; Voie, Per Erlend Torbergsen; Høgsberg, Jan Becker; Sødahl, Nils.

    ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Vol. 1 American Society of Mechanical Engineers, 2013. OMAE2013-10682.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  74. Published

    Energy-release rate and mode mixity of face/core debonds in sandwich beams. / Kardomateas, George A.; Berggreen, Christian; Carlsson, Leif A.

    In: AIAA Journal, Vol. 51, No. 4, 2013, p. 885-892.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  75. Published

    Equal modal damping design for a family of resonant vibration control formats. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Vibration and Control, Vol. 19, No. 9, 2013, p. 1294-1315.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  76. Published

    Estimating Gear Teeth Stiffness. / Pedersen, Niels Leergaard.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.-A. Mardal; A. Massing. Center for Biomedical Computing, Simula Research Laboratory, 2013. p. 225-228.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  77. Published

    Experimental and numerical study of the micro-mechanical failure in composites. / Ashouri Vajari, Danial; Martyniuk, Karolina; Sørensen, Bent F.; Legarth, Brian Nyvang.

    Proceedings of the 19th International Conference on Composite Materials . Canadian Association for Composite Structures and Materials, 2013. p. 5853-5863.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  78. Published
  79. Published

    Experimental calibration of forward and inverse neural networks for rotary type magnetorheological damper. / Bhowmik, Subrata; Weber, Felix; Høgsberg, Jan Becker.

    In: Structural Engineering and Mechanics, Vol. 46, No. 5, 2013, p. 673-693.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  80. Published

    Experimental quantification of contact forces with impact, friction and uncertainty analysis. / Lahriri, Said; Santos, Ilmar.

    In: Tribology International, Vol. 66, 2013, p. 93-104.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  81. Published
  82. Published

    Experimental Validation of Topology Optimization for RF MEMS Capacitive Switch Design. / Philippine, Mandy Axelle; Zareie, Hosein; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 6, 2013, p. 1296-1309.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  83. Published

    Explicit fourth-order stiffness representation in non-linear dynamics. / Krenk, Steen.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  84. Published

    Fracture of anisotropic materials with plastic strain-gradient effects. / Legarth, Brian Nyvang.

    Proceedings - 13th International Conference on Fracture. Chinese Society of Theoretical and Applied Mechanics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  85. Published

    Hybrid Testing of Composite Structures with Single-Axis Control. / Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 19th International Conference on Composite Materials. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  86. Published

    Implementation and applications of a finite-element model for the contact between rough surfaces. / Poulios, Konstantinos; Klit, Peder.

    In: Wear, Vol. 303, No. 1-2, 2013, p. 1-8.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  87. Published

    Improved switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    In: Optics Letters, Vol. 38, No. 14, 2013, p. 2466-2468.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  88. Published

    Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication. / Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  89. Published

    Improving nanocavity switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2013. p. MI1-7.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  90. Published

    Improving Topology Optimization using Games. / Nobel-Jørgensen, Morten; Christiansen, Asger Nyman; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  91. Published

    Interactive topology optimization on hand-held devices. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  92. Published

    Length-scale effect due to periodic variation of geometrically necessary dislocation densities. / Oztop, M. S.; Niordson, Christian Frithiof; Kysar, J. W.

    In: International Journal of Plasticity, Vol. 41, 2013, p. 189-201.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  93. Published

    Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material. / Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders; Izui, Kazuhiro; Nishiwaki, Shinji; Kogiso, Nozomu.

    In: I E E E Transactions on Magnetics, Vol. 49, No. 5, 2013, p. 2081-2084.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  94. Published

    Macromechanical parametric amplification. / Neumeyer, Stefan; Thomsen, Jon Juel.

    2013. Poster session presented at DCAMM 14th internal Symposium, Nyborg, Denmark.

    Publication: ResearchPoster – Annual report year: 2013

  95. Published

    Macromechanical parametric amplification with a base-excited doubly clamped beam. / Neumeyer, Stefan; Thomsen, Jon Juel.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  96. Published

    Material size effects on crack growth along patterned wafer-level Cu–Cu bonds. / Tvergaard, Viggo; Niordson, Christian Frithiof; Hutchinson, John W.

    In: International Journal of Mechanical Sciences, Vol. 68, 2013, p. 270-276.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  97. Published

    Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery. / Cerda Varela, Alejandro Javier; Santos, Ilmar (Main supervisor).

    Kgs. Lynby : Technical University of Denmark, 2013. 206 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  98. Published
  99. Published

    Multibody drivetrain model used for predicting gear tooth stresses in a planetary gearbox. / Jørgensen, Martin Felix (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  100. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix (Author).

    2013. DCAMM 14th internal Symposium, Nyborg, Denmark, 13/03/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  101. Published

    Multibody motion in implicitly constrained director format with links via explicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings - ECCOMAS Multibody Dynamics 2013. 2013. p. 231-240.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  102. Published

    Observations on Mode I ductile tearing in sheet metals. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau.

    In: European Journal of Mechanics A - Solids, Vol. 42, 2013, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

Previous 1 2 3 4 5 6 7 8 ...10 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word