Manufacturing Engineering

1 - 500 out of 563Page size: 500
RSS feed of this list
Sort by: Publication year
  1. 2013
  2. Published

    A control scheme for filament stretching rheometers with application to polymer melts. / Román Marín, José Manuel; Huusom, Jakob Kjøbsted; Javier Alvarez, Nicolas; Huang, Qian; Rasmussen, Henrik K.; Bach, Anders; Skov, Anne Ladegaard; Hassager, Ole.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 194, 2013, p. 14-22.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  3. Published

    All-hexahedral meshing and remeshing for multi-object manufacturing applications. / Nielsen, Chris Valentin; Fernandes, J.L.M.; Martins, P.A.F.

    In: Computer-Aided Design, Vol. 45, No. 5, 2013, p. 911-922.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  4. Published

    A new multi-zone model for porosity distribution in Al–Si alloy castings. / Tiedje, Niels Skat; Taylor, John A.; Easton, Mark A.

    In: Acta Materialia, Vol. 61, No. 8, 2013, p. 3037-3049.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  5. Published

    A new PI tuning method for an industrial process: A case study from a micro-cogeneration system. / Saglam, Gaye; Tutum, Cem Celal; Kurtulan, Sa,man.

    In: Energy Conversion and Management, Vol. 67, 2013, p. 226-239.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  6. Published

    A New Rig for Testing Textured Surfaces in Pure Sliding Conditions. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology International, Vol. 50, No. 3, 2013, p. 397-405.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  7. Published

    An explanation of the mechanism for laser induced selective activation using diffusion theory. / Zhang, Yang; Hansen, Hans Nørgaard; Hattel, Jesper Henri; Tang, Peter Torben; Nielsen, Jakob Skov; Tutum, Cem Celal.

    In: Nami Jishu yu Jingmi Gongcheng, Vol. 11, No. 2, 2013, p. 97-104.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  8. Published

    A non-contact 3D method to characterize the surface roughness of castings. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat ; Hansen, Hans Nørgaard.

    In: Journal of Materials Processing Technology, Vol. 213, No. 1, 2013, p. 59-68.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  9. Published

    Determination of friction in sheet metal forming by means of simulative tribo-tests. / Ceron, Ermanno; Bay, Niels.

    In: Key Engineering Materials, Vol. 549, 2013, p. 415-422.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  10. Published

    Final report on RMO key comparison EURAMET.L-K6: CMM 2-D artifact: ball plate. / Jusko, O.; Banreti, E.; Bergmans, R.; De Chiffre, Leonardo; Lassila, A.; Lewis, A.; Ramotowski, Z.; Saraiva, F.; Thalmann, R; Turner, P; Zeleny, V.

    In: Metrologia, Vol. 50, No. 1A, 2013, p. 04001.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  11. Published

    High-Tg TOPAS microstructured polymer optical fiber for fiber Bragg grating strain sensing at 110 degrees. / Markos, Christos; Stefani, Alessio ; Nielsen, Kristian; Rasmussen, Henrik K.; Yuan, Scott Wu; Bang, Ole.

    In: Optics Express, Vol. 21, No. 4, 2013, p. 4758-4765.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  12. Accepted

    Improving the Requirements Process in Axiomatic Design. / Thompson, Mary Kathryn.

    In: CIRP Annals - Manufacturing Technology, 2013.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  13. E-pub ahead of print

    In-process 3D geometry reconstruction of objects produced by direct light projection. / Andersen, Ulrik Vølcker; Pedersen, David Bue; Hansen, Hans Nørgaard; Nielsen, Jakob Skov.

    In: International Journal of Advanced Manufacturing Technology, 2013.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  14. Published

    Interface Behavior in Functionally Graded Ceramics for the Magnetic Refrigeration: Numerical Modeling. / Jabbari, Masoud; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Applied Mechanics and Materials, Vol. 325-326, 2013, p. 1362-1367.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  15. Published

    Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography. / Sonne, Mads Rostgaard; Hattel, Jesper Henri.

    In: Microelectronic Engineering, Vol. 106, 2013, p. 1-8.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  16. Published

    Nanopatterning of Polymer Replication Tools. / Cech, Jiri; Sonne, Mads Rostgaard; Pranov, H; Kofod, G; Matschuk, M; Murthy, S; Lam, Y. C.; Hattel, Jesper Henri; Taboryski, Rafael J.

    2013. Poster session presented at Pittcon 2013, Philadelphia, PA, United States.

    Publication: Research - peer-review › Poster – Annual report year: 2013

  17. Published

    Numerical Modeling of the Side Flow in Tape Casting of a Non-Newtonian Fluid. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: American Ceramic Society. Journal, Vol. 96, No. 5, 2013, p. 1414–1420.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  18. Published

    Open die forging of large shafts with porosity defects – physical and numerical modelling. / Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels; Alves, Luis M. ; Martins, Paulo A. F. .

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 2145-2155.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  19. Published

    Open die forging of large shafts with porosity defects – physical and numerical modelling. / Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels; Alves, Luis M. ; Martins, Paulo A. F. .

    2013. Paper presented at 16th annual ESAFORM Conference on Material Forming, Aveiro, Portugal.

    Publication: Research - peer-review › Paper – Annual report year: 2013

  20. Published

    Process induced residual stresses and distortions in pultrusion. / Baran, Ismet; Tutum, Cem Celal; Nielsen, Michael Wenani; Hattel, Jesper Henri.

    In: Composites Part B: Engineering, Vol. 51, 2013, p. 148–161.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  21. Published

    Quantification of Feeding Effects of Spot Feeding Ductile Iron Castings made in Vertically Parted Moulds. / Vedel-Smith, Nikolaj Kjelgaard; Tiedje, Niels Skat; Sällström, J.; Maza, K.T.

    2013. Paper presented at CastExpo and 117th Metalcasting Congress 2013, St.Louis, MI, United States.

    Publication: Research › Paper – Annual report year: 2013

  22. Published

    Statistical Outlier Detection for Jury Based Grading Systems. / Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder; Rosas, Harvey.

    In: 120th ASEE Annual Conference and Exhibition. 2013.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

  23. Published

    Surface roughness characterization of cast components using 3D optical methods.. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat; Hansen, Hans Nørgaard.

    2013. Paper presented at CastExpo and 117th Metalcasting Congress 2013, St.Louis, MI, United States.

    Publication: Research › Paper – Annual report year: 2013

  24. Published

    The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3. / Sonne, Mads Rostgaard; Tutum, Cem Celal; Hattel, Jesper Henri; Simar, A.; Meester, B. de.

    In: Journal of Materials Processing Technology, Vol. 213, 2013, p. 477-486.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  25. Published

    The effect of thermal contact resistance on the thermosetting pultrusion process. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Composites Part B: Engineering, Vol. 45, No. 1, 2013, p. 995-1000.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  26. Published

    The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 2127-2137.

    Publication: Research - peer-review › Conference article – Annual report year: 2013

  27. Published

    Transient overshoot extensional rheology of long-chain branched polyethylenes: Experimental and numerical comparisons between filament stretching and cross-slot flow. / Hoyle, D.M.; Huang, Qian; Auhl, D.; Hassell, D.; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Harlen, O.G.; Hassager, O.; McLeish, T.C.B.

    In: Journal of Rheology, Vol. 57, No. 1, 2013, p. 293-313.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  28. Published

    Utilizing multiple objectives for the optimization of the pultrusion process based on a thermo-chemical simulation. / Tutum, Cem Celal; Baran, Ismet; Hattel, Jesper Henri.

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 2165-2174.

    Publication: Research - peer-review › Conference article – Annual report year: 2013

  29. Published

    Verification of thickness and surface roughness of a thin film transparent coating. / Mohaghegh, Kamran; Hansen, Hans Nørgaard; Pranov, H.; Kofod, G.

    In: Proceedings of the 13th euspen International Conference. 2013.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

  30. 2012
  31. Published

    1st DeepWind 5 MW Baseline design. / Schmidt Paulsen, Uwe; Vita, Luca; Aagaard Madsen , Helge; Hattel, Jesper Henri; Ritchie, Ewen; Leban, Krisztina M.; Berthelsen, Petter A.; Carstensen, Stefan.

    In: Energy Procedia, Vol. 24, 2012, p. 27-35.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  32. Published

    8 Pin RIC Socket for Hearing Aid Applications. / Islam, Aminul; Hansen, Hans Nørgaard; Davids, Søren; Kristensen, Lars.

    In: Proceedings of the 9th International Conference on Multi-Material Micro Manufacture. ed. / Humbert Noll; Nadja Adamovic; Stefan Dimov. Research Publishing Services, 2012. p. 241-249.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  33. E-pub ahead of print

    A comparative study on life cycle assessment of micro and macro components. / Omidvarnia, Farzaneh; Islam, Aminul; Hansen, Hans Nørgaard; Olsen, Stig Irving.

    In: International Journal of Advanced Manufacturing Technology, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  34. Published

    Addressing the mechanical deformation of flexible stamps for nanoimprint lithography on double-curved surfaces. / Sonne, Mads Rostgaard; Hattel, Jesper Henri; Kristensen, Anders.

    2012. Abstract from NNT 2012, Napa, CA, United States.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  35. Published

    Addressing the mechanical deformation of flexible stamps for nanoimprint lithography on double-curved surfaces. / Sonne, Mads Rostgaard; Hattel, Jesper Henri; Kristensen, Anders.

    2012. Poster session presented at NNT 2012, Napa, CA, United States.

    Publication: Research › Poster – Annual report year: 2012

  36. Published

    Analysis of fluid lubrication mechanisms in metal forming at mesoscopic scale. / Dubar, L.; Hubert, C.; Christiansen, Peter; Bay, Niels; Dubois, A.

    In: C I R P Annals, Vol. 61, No. 1, 2012, p. 271-274.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  37. Published

    Analysis of nucleation modelling in ductile cast iron. / Moumeni, Elham; Tutum, Cem Celal; Tiedje, Niels Skat; Hattel, Jesper Henri.

    In: 13rd International conference on advances in solidification process: Session V B: Steel and cast iron. Vol. V B 3 2012. (IOP Conference Series: Materials Science and Engineering; No. 1, Vol. 27).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  38. Published

    An Axial Sliding Test for machine elements surfaces. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Proceedings of the 15th Nordic Symposium on Tribology . 2012.

    Publication: Research › Conference abstract in proceedings – Annual report year: 2012

  39. Published

    An investigation on the effect of surface characteristics on adhesion between polymer melts and replication tools. / Delaney, Kevin D.; Kennedy, Jonathan David; Bissacco, Giuliano; Moore, Eric.

    In: Conference Proceedings of 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012). Vol. 3 Society of Plastics Engineers, 2012. p. 1847-1852.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  40. Published

    A plateau-valley separation method for multifunctional surfaces characterization. / Godi, Alessandro; Kühle, A.; De Chiffre, Leonardo.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  41. Published

    Are Entangled Polymer Melts Different From Solutions?. / Huang, Qian; Mednova, Olga; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Almdal, Kristoffer; Hassager, Ole.

    2012. Abstract from 16th International Congress on Rheology, Lisbon, Portugal.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  42. Published

    A solidification model for unmodified, Na-modified and Sr-modified Al-Si alloys. / Tiedje, Niels Skat; Hattel, Jesper Henri; Taylor, J. A.; Easton, M. A.

    In: The 3rd International Conference on Advances in Solidification Processes, Rolduc Abbey 2011. IOP Publishing Ltd, 2012. p. 012033 (IOP Conference Series: Materials Science and Engineering, Vol. 27).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  43. Published

    A Structured Review and Classification of Demolding Issues and Proven Solutions. / Delaney, K. D.; Bissacco, G.; Kennedy, D.

    In: International Polymer Processing, Vol. 27, No. 1, 2012, p. 77-90.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  44. Published

    A study on evaluation strategies in dimensional X-ray computed tomography by estimation of measurement uncertainties. / Müller, Pavel; Hiller, Jochen; Cantatore, Angela; De Chiffre, Leonardo.

    In: International Journal of Metrology and Quality Engineering, Vol. 3, No. 2, 2012, p. 107-115.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  45. Published

    A TEM Study on the Microstructure of Fine Flaky Graphite. / Moumeni, Elham; Tiedje, Niels Skat; Horsewell, Andy; Hattel, Jesper Henri.

    2012. Abstract from 52nd International Foundry Conference, Portoroz, Slovenia.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  46. Published

    Benchmarking of direct and indirect friction tests in micro forming. / Eriksen, Rasmus Solmer; Calaon, Matteo; Arentoft, M.; Bay, Niels.

    In: Key Engineering Materials, Vol. 504-506, 2012, p. 581-586.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  47. Published

    Casting traceability with direct part marking using reconfigurable pin-type tooling based on paraffin–graphite actuators. / Vedel-Smith, Nikolaj Kjelgaard; Lenau, Torben Anker.

    In: Journal of Manufacturing Systems, Vol. 31, No. 2, 2012, p. 113-120.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  48. Published

    Characterization and analysis of micro channels and sub-micron surface roughness of injection moulded microfluidic systems using optical metrology. / Tosello, Guido; Marinello, Francesco; Hansen, Hans Nørgaard.

    In: Plastics, Rubber & Composites, Vol. 41, No. 1, 2012, p. 29-39.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  49. Published

    Characterization of large area nanostructured surfaces using AFM measurements. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Garnæs, Jørgen; Ravn, Christian; Tang, Peter Torben.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  50. Published

    Clean forming of stainless steel and titanium products by lubricious oxides. / Heikkilä, Irma; Wadman, Boel; Thoors, Håkan; Bay, Niels.

    In: Proceedings of NORDTRIB. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  51. Published

    Cleaving of TOPAS and PMMA microstructured polymer optical fibers: Core-shift and statistical quality optimization. / Stefani, Alessio; Nielsen, Kristian; Rasmussen, Henrik K.; Bang, Ole.

    In: Optics Communications, Vol. 285, No. 7, 2012, p. 1825-1833.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  52. E-pub ahead of print

    Computed tomography as a tool for tolerance verification of industrial parts. / Müller, Pavel; Cantatore, Angela; Andreasen, J.L.; Hiller, Jochen; De Chiffre, Leonardo.

    In: Procedia Engineering, 2012.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  53. Published

    Demonstrator realization with basic process : COTECH Deliverable 7.2.1 (CP-IP 214491-2). / Islam, Aminul; Albertin, Thomas.

    Vienna : COTECH, 2012. 62 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  54. Published

    Demoulding force in micro-injection moulding. / Griffiths, C.A.; Dimov, S.S.; Scholz, S.; Tosello, Guido; Rees, A.

    In: Proceedings of the 7th International Conference on Micro Manufacturing . 2012. p. 389-393.

    Publication: Research › Article in proceedings – Annual report year: 2012

  55. Accepted

    Design and production of a novel sand materials strength testing machine for foundry applications. / Nwaogu, Ugochukwu Chibuzoh; Hansen, K. S.; Tiedje, Niels Skat.

    In: International Foundry Research, Vol. 64, No. 2, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  56. Published

    Dimensional measurement of micro-moulded parts by computed tomography : Paper. / Ontiveros, S.; Yagüe-Fabra, J.A.; Jiménez, R.; Tosello, Guido; Gasparin, Stefania; Pierobon, A.; Carmignato, S.; Hansen, Hans Nørgaard.

    In: Measurement Science and Technology, Vol. 23, No. 12, 2012, p. Paper 125401.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  57. Published

    Effective viscosity of confined hydrocarbons. / Sivebæk, Ion Marius; Samoilov, V.N.; Persson, B.N.J.

    In: Physical Review Letters, Vol. 108, No. 3, 2012, p. 036102.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  58. Published

    Effective Viscosity of Confined Hydrocarbons. / Sivebæk, Ion Marius; Samoilov, Vladimir N.; Persson, Bo N.J.

    2012. Abstract from “Friction: From elementary mechanisms to macroscopic behavior” , Berlin, Germany.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  59. Published

    Effective viscosity of polymers. / Sivebæk, Ion Marius; Samoilov, V.N.; Persson, B.N.J.

    2012. Poster session presented at Fundamental Aspects of Friction and Lubrication, Leiden, Netherlands.

    Publication: Research › Poster – Annual report year: 2012

  60. Published

    Effect of titanium on the near eutectic grey iron. / Moumeni, Elham; Tiedje, Niels Skat; Hattel, Jesper Henri.

    2012. Abstract from 12th International Foundrymen Conference, Opatija, Croatia.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  61. Published

    Elimination of Hot Tears in Steel Castings by Means of Solidification Pattern Optimization. / Kotas, Petr; Tutum, Cem Celal; Thorborg, Jesper; Hattel, Jesper Henri.

    In: Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, Vol. 43, No. 3, 2012, p. 609-626.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  62. Published

    Estimating the workpiece-backingplate heat transfer coefficient in friction stirwelding. / Larsen, Anders; Stolpe, Mathias; Hattel, Jesper Henri.

    In: Engineering Computations, Vol. 29, No. 1, 2012, p. 65-82.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  63. Published

    Evaluation of metrology technologies for free form surfaces. / Arámbula, K.; Siller, H.R.; De Chiffre, Leonardo; Rodríguez, C.A.; Cantatore, Angela.

    In: International Journal of Metrology and Quality Engineering, Vol. 3, No. 1, 2012, p. 55.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  64. Published

    Experimental Determination and Numerical Modelling of Process Induced Strains and Residual Stresses in Thick Glass/Epoxy Laminate. / Nielsen, Michael Wenani; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Branner, Kim; Nielsen, Per Hørlyk.

    In: ECCM15 - 15th European Conference On Composite Materials. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  65. Published

    Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors. / Calaon, Matteo; Islam, Aminul; Hansen, Hans Nørgaard; Ravn, Christian.

    In: International Journal of Advanced Manufacturing Technology, Vol. 59, No. 1-4, 2012, p. 101-109.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  66. Published

    Extended FEM modeling of crack paths near inclusions. / Nielsen, Chris Valentin; Legarth, Brian Nyvang; Niordson, Christian Frithiof.

    In: International Journal for Numerical Methods in Engineering, Vol. 89, 2012, p. 786-804.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  67. Published

    Fabrication and characterization of porous-core honeycomb bandgap THz fibers. / Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    In: Optics Express, Vol. 20, No. 28, 2012, p. 29507-29517.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  68. Published

    Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification. / Tiedje, Niels Skat; Taylor, John A.; Easton, Mark A.

    In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 43, No. 12, 2012, p. 4846-4858.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  69. Published

    Flow and Failure in Extension of Monodisperse Polymer Melts. / Rasmussen, Henrik K.

    2012. Abstract from 16th International Congress on Rheology, Lisbon, Portugal.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  70. Published

    Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids. / Spangenberg, J.; Roussel, N.; Hattel, J.H.; Stang, H.; Skocek, J.; Geiker, M.R.

    In: Cement and Concrete Research, Vol. 42, No. 4, 2012, p. 633-641.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  71. Published

    Hole quality and burr reduction in drilling aluminium sheets. / Pilny, Lukas; De Chiffre, Leonardo; Piska, Miroslav; Villumsen, Morten F.

    In: C I R P - Journal of Manufacturing Science and Technology, Vol. 5, 2012, p. 102-107.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  72. Published

    Improvement of Feeder Technologies for Energy Savings in Cast Iron Foundries. / Vedel-Smith, Nikolaj Kjelgaard.

    2012. Poster session presented at Energieffektivisering for fremtiden, Kgs.Lyngby, Denmark.

    Publication: Research › Poster – Annual report year: 2012

  73. E-pub ahead of print

    In situ measurement using FBGs of process-induced strains during curing of thick glass/epoxy laminate plate : experimental results and numerical modelling. / Nielsen, Michael Wenani; Schmidt, Jacob Wittrup; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Markussen, Christen Malte.

    In: Wind Energy, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  74. Published

    Interface Oscillation in the Side-by-Side (SBS) Tape Casting of Functionally Graded Ceramics (FGCs). / Jabbari, Masoud; Bulatova, Regina; Hattel, Jesper Henri; Bahl, Christian.

    In: American Physical Society. Bulletin, Vol. 57, No. 17, 2012, p. H7.00002 .

    Publication: Research › Conference abstract in journal – Annual report year: 2012

  75. Published

    Inter-RMO Key Comparison EUROMET.L-K5.2004: Calibration of a step gauge : Final report. / Prieto, Emilio; Brown, Nicholas; Lassila, Antti; Lewis, Andrew; Matus, Michael; Vailleau, Georges; De Chiffre, Leonardo; Kotte, Gerard W J L; Frennberg, Mikael; McQuoid, Howard; Zelený, Vít; Ramotowski, Zbigniew; Bánréti, Edit; Duta, Alexandru; Picotto, Gian Bartolo; Doytchinov, Kostadin; Valente de Oliveira, Jose Carlos; Alonso, Miguel Viliesid; Chekirda, Konstantin.

    In: Metrologia, Vol. 49, No. 1A, 2012, p. 04008.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  76. Published

    Investigation of the thermal contact resistance in thermosetting pultrusion process. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Proceedings of the 20th International Conference on Composites/Nano Engineering. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  77. Published

    Investigation on the influence of image quality in X-ray CT metrology. / Müller, Pavel; Hiller, Jochen; Cantatore, Angela; Bartscher, Markus; De Chiffre, Leonardo.

    2012. Paper presented at Conference on Industrial Computed Tomography , Wels, Austria.

    Publication: Research - peer-review › Paper – Annual report year: 2012

  78. Published

    Liquid lubrication in sheet metal forming at mesoscopic scale. / Hubert, C.; Dubar, L.; Bay, Niels; Christiansen, Peter; Dubois, A.

    In: Proceedings of the 7th ICFG Workshop on Process Simulation in Metalforming. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  79. Published

    Manufacture of functional surfaces through combined application of tool manufacturing processes and Robot Assisted Polishing. / Eriksen, Rasmus Solmer; Arentoft, Mogens; Grønbæk, J.; Bay, Niels.

    In: C I R P Annals, Vol. 61, No. 1, 2012, p. 563-566.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  80. Published

    Material investigation for manufacturing of reference step gauges for CT scanning verification. / Cantatore, Angela; Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  81. Published

    Measurement capability overview in PolyNano : Final. / Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard.

    2012. 16 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

    Publication: Research › Report – Annual report year: 2012

  82. Published

    Mechanical properties of chemically bonded sand core materials dipped in sol-gel coating impregnated with filter : novel approach to improve casting quality . / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat.

    In: International Journal of Cast Metals Research, Vol. 25, No. 5, 2012, p. 307-317.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  83. Published

    Mechanism of spontaneous hole formation in thin polymeric films. / Yu, Kaijia; Rasmussen, Henrik K.; Román Marín, José Manuel; Hassager, Ole.

    In: Physical Review B (Condensed Matter and Materials Physics), Vol. 85, 2012, p. 024201.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  84. Published

    Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding : Applications in Metal Forming and Resistance Welding. / Nielsen, Chris Valentin; Zhang, Wengi; Alves, Luis; Bay, Niels; Martins, Paulo F.

    Springer, 2012. 120 p. (Springer Briefs in Applied Sciences and Technology: Manufacturing and Surface Engineering).

    Publication: Research › Book – Annual report year: 2012

  85. Published

    Modelling and simulation of A-segregates in steel castings using a thermal criterion function : Part I - Background and validation. / Kotas, Petr; Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 28, No. 7, 2012, p. 872-878.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  86. Published

    Modelling injection moulding machines for micro manufacture applications through functional analysis. / Fantoni, G.; Tosello, Guido; Gabelloni, D.; Hansen, Hans Nørgaard; Wessel W. Wits, Juan M. Jauregui-Becker, Hans-Christian Mohring.

    In: Procedia CIRP, Vol. 2, 2012, p. 107-112.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  87. Published

    Modelling the void deformation and closure by hot forging of ingot castings. / Christiansen, Peter; Hattel, Jesper Henri; Kotas, Petr; Lászlo, Vladimis.

    In: Proceedings of 1st International Conference on Ingot Casting, Rolling and Forging. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  88. Published

    New reference object for metrological performance testing of industrial CT systems. / Müller, Pavel; Hiller, Jochen; Cantatore, Angela; Tosello, Guido; De Chiffre, Leonardo.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  89. Published

    Numerical modeling of the conduction and radiation heating in precision glass moulding. / Sarhadi, Ali; Hattel, Jesper Henri; Hansen, Hans Nørgaard; Tutum, Cem Celal.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  90. Published

    Numerical Modeling of the Flow of a Power Law Ceramic Slurry in the Tape Casting Process. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: Proceedings CAN'2012 : 10th AES-ATEMA International Conference on Advances and Trends in Engineering Materials and their Applications. Advanced Engineering Solutions, 2012. p. 151-157.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  91. E-pub ahead of print

    Optimization of the Thermosetting Pultrusion Process by Using Hybrid and Mixed Integer Genetic Algorithms. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Applied Composite Materials, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  92. Published

    Packing parameters effect on injection molding of polypropylene nanostructured surfaces. / Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard; Ravn, C.; Islam, Aminul.

    In: Proceedings of the 70th Annual Technical Conference & Exhibition. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  93. Published

    Patterns of gravity induced aggregate migration during casting of fluid concretes. / Spangenberg, Jon; Roussel, N.; Hattel, Jesper Henri; Sarmiento, E.V.; Zirgulis, G.; Geiker, Mette Rica.

    In: Cement and Concrete Research, Vol. 42, No. 12, 2012, p. 1571-1578.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  94. Published

    Polymer wear evaluation. / Lagerbon, Mikkel; Sivebæk, Ion Marius.

    In: Proceedings of the 15th Nordic Symposium on Tribology. ed. / N. Espallargas. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  95. Published

    PolyNano M.6.1.1 Process validation state-of-the-art : Final. / Tosello, Guido; Hansen, Hans Nørgaard; Calaon, Matteo.

    2012. 44 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

    Publication: Research - peer-review › Report – Annual report year: 2012

  96. Published

    PolyNano M6.2.1 First generation process finger print – design, test and validation : Draft. . / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido.

    2012. 11 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

    Publication: Research › Report – Annual report year: 2012

  97. Published

    Prediction of internal strains during curing, post-curing and demoulding of thick glass/epoxy composite - Analysis of different constitutive models. / Nielsen, Michael Wenani; Schmidt, Jacob Wittrup; Hattel, Jesper Henri.

    2012. Abstract from 6th International Conference on Advanced Computational Engineering and Experimenting, Istanbul, Turkey.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  98. Published

    Preliminary results of a proficiency testing of industrial CT scanners using small polymer items. / Angel, Jais Andreas Breusch; Cantatore, Angela; De Chiffre, Leonardo.

    In: Proceedings of the 12th euspen International Conference. 2012.

    Publication: Research › Article in proceedings – Annual report year: 2012

  99. Published

    Probabilistic thermo-chemical analysis of a pultruded composite rod. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Proceedings of the 15th European Conference on Composite Materials. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  100. Published

    Process Simulation of Resistance Weld Bonding and Automotive Light-weight Materials. / Zhang, Wenqi; Chergui, Azeddine; Nielsen, Chris Valentin.

    2012. Abstract from 7th International Seminar on Advances in Resistance Welding, Busan, South Korea.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  101. Published

    Production Quality Control Of Microfluidic Chip Designs. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Garnæs, Jørgen; Nørregaard, Jesper; Guttmann, Markus.

    In: Proceedings of the 3rd European Conference on Microfluidics . 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  102. Published

    Prototypes realization with high-risk process : Draft. COTECH deliverable D7.2.3 (CP-IP 214491-2). / Islam, Aminul; Garcia, Ignacio.

    COTECH, 2012. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  103. Published

    Prototypes realization with medium-risk process : COTECH Deliverables D7.2.2 (CP-IP 214491-2). / Islam, Aminul.

    COTECH, 2012. 95 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  104. E-pub ahead of print

    Quality control and process capability assessment for injection-moulded micro mechanical parts. / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Islam, Aminul.

    In: International Journal of Advanced Manufacturing Technology, Vol. 62, No. 1-4, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  105. Published

    Reaming process improvement and control: An application of statistical engineering. / Müller, Pavel; Genta, G.; Barbato, G.; De Chiffre, Leonardo; Levi, R.

    In: C I R P - Journal of Manufacturing Science and Technology, Vol. 5, No. 3, 2012, p. 196-201.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  106. Published

    Reliability Estimation of the Pultrusion Process Using the First-Order Reliability Method (FORM). / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Applied Composite Materials, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  107. Published

    Replica casting technique for micro Fresnel lenses characterization. / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Albajez, J.A.

    In: Proceedings of the 12th euspen International Conference. Vol. 2 2012. p. 319-311.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  108. Published

    Reply to ‘On the ‘‘viscosity overshoot’’ during the uniaxial extension of a low density polyethylene’. / Rasmussen, Henrik K.; Hassager, Ole.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 171-172, 2012, p. 106.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  109. Published

    Report on prototypes characterization basic process : COTECH Deliverable 7.3.1 (CP-IP 214491-2). / Islam, Aminul; Esmoris, Jose Ignacio.

    Vienna : COTECH, 2012. 58 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  110. Published

    Report on prototypes characterization medium-risk process, COTECH D7.3.2 : Draft. COTECH Deliverable 7.3.2 (CP-IP 214491-2). / Islam, Aminul; Staemmler, Lutz.

    COTECH, 2012. 54 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  111. Published

    Report on prototypes characterization medium-risk process, COTECH D7.3.3 : Final. COTECH Deliverable 7.3.3 (CP-IP 214491-2). / Padovani, Sara; Islam, Aminul.

    COTECH, 2012. 63 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2012

  112. Published

    Reproducibility of a reaming test. / Pilny, Lukas; Müller, Pavel; De Chiffre, Leonardo.

    In: Proceedings of the 5th International Swedish Production Symphosium. 2012. p. 199-205.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  113. Published

    Simulative Testing of Friction and Lubrication in Cold Forging of Steel and Aluminum. / Ceron, Ermanno; Bay, Niels; Aida, Tetsuo; Dohda, Kuniaki; Nicolaisen, Tor Erik.

    In: Transactions of the North American Manufacturing Research Conference. Proceedings, Vol. 40, 2012, p. 287-296.

    Publication: Research › Conference article – Annual report year: 2012

  114. Published

    Single-sided sheet-to-tube spot welding investigated by 3D numerical simulations. / Nielsen, Chris Valentin; Chergui, Azeddine; Zhang, Wenqi.

    2012. Abstract from 7th International Seminar on Advances in Resistance Welding, Busan, South Korea.

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2012

  115. Published

    Stress and neutron scattering measurements on linear polymer melts undergoing steady elongational flow. / Hassager, Ole; Mortensen, Kell; Bach, Anders; Almdal, Kristoffer; Rasmussen, Henrik K.; Pyckhout-Hintzen, Wim.

    In: Rheologica Acta, Vol. 51, No. 5, 2012, p. 385-394.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  116. Published

    Stress relaxation and reversed flow of low-density polyethylene melts following uniaxial extension.. / Huang, Qian; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Hassager, Ole.

    In: Journal of Rheology, Vol. 56, No. 6, 2012, p. 1535-1554.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  117. Published

    Strongly non-linear extensional stress is not dominated by finite chain extensibility in polystyrene melts undergoing large steady rate extensional flows.. / Almdal, Kristoffer; Hassager, Ole; Mortensen, Kell; Bach, Anders; Rasmussen, Henrik K.; Pyckhout-Hintzen, Wim .

    2012. Poster session presented at High Polymer Research Group 52nd HPRG-Meeting, Pott Shrigley, United Kingdom.

    Publication: Research - peer-review › Poster – Annual report year: 2012

  118. Published

    Surface wear of TiN coated nickel tool during the injection moulding of polymer micro Fresnel lenses. / Tosello, Guido; Hansen, Hans Nørgaard; Gasparin, Stefania; Albajez, José Antonio; Esmoris, José Ignacio.

    In: C I R P Annals, Vol. 61, No. 1, 2012, p. 535-538.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  119. Published

    Temperature compensated, humidity insensitive, high-Tg TOPAS FBGs for accelerometers and microphones. / Stefani, Alessio (Invited author); Yuan, W. (Invited author); Markos, C. (Invited author); Rasmussen, Henrik K. (Invited author); Andresen, S. (Invited author); Guastavino, R. (Invited author); Nielsen, F. K. (Invited author); Rose, B. (Invited author); Jespersen, O. (Invited author); Herholdt-Rasmussen, N. (Invited author); Bang, Ole (Invited author).

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8421, 2012, p. 84210Y.

    Publication: Research - peer-review › Conference article – Annual report year: 2013

  120. Published

    Temporal Evolution of Design Principles in Engineering Systems: Analogies with Human Evolution. / Deb, Kalyanmoy; Bandaru, Sunith; Tutum, Cem Celal.

    In: Lecture Notes in Computer Science, Vol. 7492, 2012, p. 1-11.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  121. Published

    Testing and Prediction of Limits of Lubrication in Sheet Metal Forming. / Ceron, Ermanno; Bay, Niels.

    In: Proceedings of International Deep Drawing Research Group Conference. 2012. p. 251-257.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  122. Published

    The COTECH knowledge database: assessment of critical factors in micro moulding. / Tosello, Guido; Griffiths, C.A.; Hansen, Hans Nørgaard; Dimov, S.S.

    In: Proceedings of the 9th International Conference on Multi-Material Micro Manufacture . ed. / Humbert Noll; Nadja Adamovic; Stefan Dimov. 2012. p. 229-235.

    Publication: Research › Article in proceedings – Annual report year: 2012

  123. Published

    The effect of post-welding conditions in friction stir welds: From weld simulation to Ductile Failure. / Hattel, Jesper Henri; Nielsen, Kim Lau; Tutum, Cem Celal.

    In: European Journal of Mechanics A - Solids, Vol. 33, 2012, p. 67-74.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  124. Published

    Thermal modelling of the multi-stage heating system with variable boundary conditions in the wafer based precision glass moulding process. / Sarhadi, Ali; Hattel, Jesper Henri; Hansen, Hans Nørgaard; Tutum, Cem Celal; Lorenzen, Lasse; Skovgaard, Peter M.W.

    In: Journal of Materials Processing Technology, Vol. 212, No. 8, 2012, p. 1771-1779.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  125. Published

    Thermo-chemical simulation of a composite offshore vertical axis wind turbine blade. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Proceedings of the European Wind Energy Conference. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  126. Published

    Tooling solutions for sheet metal forming and punching of lean duplex stainless steel.. / Wadman, Boel; Madsen, Erik; Bay, Niels; Bergström, Fredric.

    In: Proceedings of the 9th International Tooling Conference. ed. / H. Leitner. 2012. p. 621-629.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  127. Published

    Transient Overshoot Extensional Rheology: Experimental and Numerical Comparisons. / Hoyle, David; Huang, Qian; Auhl, Dietmar; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Harlen, Oliver; Hassager, Ole; McLeish, Tom.

    2012. Abstract from 16th International Congress on Rheology, Lisbon, Portugal.

    Publication: Research › Conference abstract for conference – Annual report year: 2012

  128. Published

    Tribological study in roll forming of lean duplex stainless steel sheets. / Nielsen, Peter Søe; Nielsen, Morten Strogaard; Bay, Niels.

    In: Proceedings of International Deep Drawing Research Group Conference. 2012. p. 592-597.

    Publication: Research › Article in proceedings – Annual report year: 2012

  129. Published

    Two-component micro injection moulding for hearing aid applications. / Islam, Aminul; Hansen, Hans Nørgaard; Marhöfer, David Maximilian; Angel, Jais Andreas Breusch; Dormann, B.; Bondo, M.

    In: International Journal of Advanced Manufacturing Technology, Vol. 62, No. 5-8, 2012, p. 605-615.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  130. Published

    Using sol-gel component as additive to foundry coatings to improve casting quality. / Nwaogu, Ugochukwu Chibuzoh; Poulsen, T.; Gravesen, B.; Tiedje, Niels Skat.

    In: International Journal of Cast Metals Research, 2012, p. 176-187.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  131. Published

    Verification of Tolerance Chains in Micro Manufacturing. / Gasparin, Stefania; Hansen, Hans Nørgaard (Supervisor); De Chiffre, Leonardo (Supervisor); Tosello, Guido (Supervisor).

    DTU Mechanical Engineering, 2012. 290 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2012

  132. 2011
  133. Published

    Integrated Modeling of Process, Structures and Performance in Cast Parts. / Kotas, Petr; Hattel, Jesper Henri (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011. 252 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2011

  134. Published

    Polymer fiber waveguides for terahertz radiation. / Nielsen, Kristian; Bang, Ole (Supervisor); Rasmussen, Henrik K. (Supervisor); Jepsen, Peter Uhd (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2011.

    Publication: Research › Ph.d. thesis – Annual report year: 2011

  135. Published

    870nm Bragg grating in single mode TOPAS microstructured polymer optical fibre. / Yuan, Wu; Webb, David J.; Kalli, Kyriacos; Nielsen, Kristian; Stefani, Alessio; Rasmussen, Henrik K.; Bang, Ole.

    In: Proceedings of the SPIE - The International Society for Optical Engineering, Vol. 7753, 2011, p. 77538X.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  136. Published

    A 1d Coupled Curing and Visco-Mechanical Void Growth Model of Thick Thermosetting Composite Laminates. / Nielsen, Michael Wenani; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Branner, Kim; Nielsen, Per Hørlyk.

    In: ICCM18. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  137. Published

    Advanced free-form micro tooling : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Tosello, Guido; Gavillet, J.

    2011. 21 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  138. E-pub ahead of print

    A friction model for cold forging of aluminum, steel and stainless steel provided with conversion coating and solid film lubricant. / Bay, Niels; Eriksen, Morten; Tan, Xincai; Wibom, Ole.

    In: C I R P Annals, Vol. 60, No. 1, 2011, p. 303-306.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  139. Published

    Air Flow and Gassing Potential in Micro-injection Moulding. / Griffithsa, C.A. (Invited author); Dimova, S.S. (Invited author); Scholz, S. (Invited author); Tosello, Guido (Invited author).

    In: Proceedings of the 8th International Conference on Multi-Material Micro Manufacture. ed. / Heinz Kück; Holger Reinecke; Stefan Dimov. Research Publishing Services, 2011. p. 310-314.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  140. Published

    A new pair of hard-soft plastic combination for precision manufacturing of two component plastic parts.. / Islam, Aminul; Hansen, Hans Nørgaard; Marhöfer, M.; Bondo, M.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  141. E-pub ahead of print

    Application of hard coatings for blanking and piercing tools. / Podgornik, B.; Zajec, B.; Bay, Niels; Vižintin, J.

    In: Wear, Vol. 270, No. 11-12, 2011, p. 850-856.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  142. Published

    Asperity deformation during running-in. / Jakobsen, Jørgen; Sivebæk, Ion Marius.

    In: Tribologia, Vol. 30, No. 1-2, 2011, p. 60-65.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  143. Published

    Automatic synthesis of MEMS devices using self-adaptive hybrid metaheuristics. / Tutum, Cem Celal; Fan, Zhun.

    In: GECCO 2011. 2011. p. 813-814.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2011

  144. Published

    Autonomous Optimization of a Solidification Pattern and Its Effect on Porosity and Segregation in Steel Castings. / Kotas, Petr; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: AFS Proceedings. American Foundry Society, 2011. p. 11-073.

    Publication: Research › Article in proceedings – Annual report year: 2011

  145. Published

    Backward can extrusion with conical,rotating punch as a cold forging tribology test. / Ceron, Ermanno; Bay, Niels; Tetsuo, A.; Dohda, K.

    In: 44th ICFG (International Cold Forging Group) Plenary Meeting. 2011. p. 187-193.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  146. Published

    Cavity air flow behavior during filling in microinjection molding. / Griffiths, C.A.; Dimov, S.S.; Scholz, S.; Tosello, Guido.

    In: Journal of Manufacturing Science and Engineering, Vol. 133, No. 1, 2011, p. 011006.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  147. Published

    Characterisation of multifunctional surfaces with robust filters. / Friis, Kasper Storgaard; Godi, Alessandro; De Chiffre, Leonardo.

    In: 4. International Swedish Production Symposium. 2011. p. 525-532.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  148. E-pub ahead of print

    Characterization and robust filtering of multifunctional surfaces using ISO standards. / Friis, Kasper Storgaard; Godi, Alessandro; De Chiffre, Leonardo.

    In: Measurement Science and Technology, Vol. 22, No. 12, 2011, p. 125101.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  149. Published

    Characterization of multifunctional surfaces during fabrication. / Godi, Alessandro; Friis, Kasper Storgaard; De Chiffre, Leonardo.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research › Article in proceedings – Annual report year: 2011

  150. Published

    Characterization of ultra-fine surfaces produced by robot assisted polishing. / Hansen, Hans Nørgaard; Gasparin, Stefania; Sobiecki, Rene; Grønbæk, J.; Lazarev, R.

    In: Proceedings of the 13. International Conference on Metrology and Properties of Engineering Surfaces. 2011. p. 244-248.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  151. Published

    Cold Welding. / Bay, Niels.

    In: ASM Handbook. ed. / T. Lienert; T. Siewert; S. Babu; V. Acoff. Vol. 6A, Welding Fundamentals and Processes ASM International, 2011. p. 711-716.

    Publication: Research - peer-review › Book chapter – Annual report year: 2011

  152. Published

    Computed tomography for dimensional metrology. / Kruth, J.P.; Bartscher, M.; Carmignato, S.; Schmitt, R.; De Chiffre, Leonardo; Weckenmann, A.

    In: C I R P Annals, Vol. 60, No. 2, 2011, p. 821-842.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  153. Published

    Deepwind - an innovative wind turbine concept for offshore. / Schmidt Paulsen, Uwe; Friis Pedersen, Troels; Aagaard Madsen, Helge; Enevoldsen, Karen; Nielsen, Per Hørlyk; Hattel, Jesper Henri; Zanne, Luca; Battisti, Lorenzo; Brighenti, Allessandra; Lacaze, Marie; Lim, Victor; Wedel-Heinen, Jakob; Berthelsen, Petter A.; Carstensen, Stefan; de Ridder, Erik-Jan; van Bussel, Gerard; Tescione, Giuseppe.

    In: Proceedings. EWEA, 2011.

    Publication: Research › Article in proceedings – Annual report year: 2011

  154. Published

    Demonstrator desing for high risk process : COTECH Deliverable 7.1.3 (CP-IP 214491-2). / Islam, Aminul.

    Vienna : COTECH, 2011. 49 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  155. Published

    Dimensional metrology for process and part quality control in micro manufacturing. / Hansen, Hans Nørgaard; Tosello, Guido; Gasparin, Stefania; De Chiffre, Leonardo.

    In: International Journal of Precision Technology, Vol. 2, No. 2-3, 2011, p. 118-135.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  156. Published

    Direct probing of evanescent field for characterization of porous terahertz fibers. / Atakaramians, Shaghik; Afshar V., Shahraam; Nagel, Michael; Rasmussen, Henrik K.; Bang, Ole; Monro, Tanya M.; Abbott, Derek.

    In: Applied Physics Letters, Vol. 98, No. 12, 2011, p. 121104.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  157. Published

    Effects of glass fibers on the properties of micro molded plastic parts. / Islam, Aminul (Invited author); Hansen, Hans Nørgaard (Invited author); Gasparin, Stefania (Invited author); Bondo, M. (Invited author).

    In: ANTEC 2011 Conference. Society of Plastics Engineers Incorporated (SPE), 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  158. Published

    Effects of Glass Fibres on the Properties of Micro Moulded Plastic Parts. / Islam, Aminul; Hansen, Hans Nørgaard; Gasparin, Stefania; Bondo, M.

    In: Commercial Micro Manufacturing Magazine, Vol. 4, No. 7, 2011.

    Publication: Research › Journal article – Annual report year: 2012

  159. Published

    Ensaio de Compressão com Discos Empilhados. / Alves, Luis Manuel Mendonca; Nielsen, Chris Valentin; Martins, Paulo António irme.

    2011. Paper presented at 31st SENAFOR - International Conference of Forging, Porto Alegre, Brazil.

    Publication: Research › Paper – Annual report year: 2012

  160. Published

    Establishment of sub-µm structured polymer surfaces texture using a non-comnventional approach. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Ravn, Christian; Tang, Peter Torben.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  161. E-pub ahead of print

    Experimental evaluation of the pseudotime principle for nonisothermal polymer flows. / Yu, Kaijia; Rasmussen, Henrik K.; Skov, Anne Ladegaard.

    In: Journal of Rheology, Vol. 55, No. 5, 2011, p. 1059-1067.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  162. Published

    Experimental investigation on 3D-SEM reconstructions of a wire gauge using stereo-pair technique. / Carli, Lorenzo; Genta, G.; Cantatore, Angela; Barbato, G.; De Chiffre, Leonardo; Levi, R.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  163. Published

    Failure mechanisms in single-point incremental forming of metals. / Silva, Maria B.; Nielsen, Peter Søe; Bay, Niels; Martins, P. A. F.

    In: International Journal of Advanced Manufacturing Technology, Vol. 56, No. 9-12, 2011, p. 893-903.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  164. Published

    Feasibility of wear compensation in micro EDM milling based on discharge counting and discharge population characterization. / Bissacco, Giuliano; Hansen, Hans Nørgaard; Tristo, G.; Valentincic, J.

    In: C I R P Annals, Vol. 60, No. 1, 2011, p. 231-234.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  165. Published

    Filament Stretching Rheometry. / Hassager, Ole (Invited author); Huang, Qian (Invited author); Yu, Kaijia (Invited author); Román Marín, José Manuel (Invited author); Skov, Anne Ladegaard (Invited author); Rasmussen, Henrik K. (Invited author).

    2011. Abstract from Annual Meeting of the German Rheological Society, Berlin, Germany, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2011

  166. Published

    Foundry Coating Technology: A Review. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat.

    In: Materials Sciences and Applications, Vol. 2, No. 8, 2011, p. 1143-1160.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  167. Published

    Geometrical metrology on silicone rubber by computed tomography. / Müller, Pavel; Pacurar, Ramona Alexandra; De Chiffre, Leonardo; Cantatore, Angela; Berce, P.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  168. Published

    Geometrical metrology on vacuum cast silicone rubber form using computed tomography. / Pacurar, Ramona; Müller, Pavel; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2011. 68 p.

    Publication: Research - peer-review › Report – Annual report year: 2011

  169. Published

    Graduate and Ph.D. Course on Design and Manufacture of Micro Mechanical Systems. / Hansen, Hans Nørgaard; De Grave, Arnaud.

    In: 7th International CDIO Conference. 2011. p. 1058-1068.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  170. Published

    High Accuracy Three-dimensional Simulation of Micro Injection Moulded Parts. / Tosello, Guido (Invited author); Costa, F. S. (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  171. Published

    Higher-level Innovization : A Case Study from Friction Stir Welding Process Optimization. / Bandaru, Sunith; Tutum, Cem Celal; Deb, Kalyanmoy; Hattel, Jesper Henri.

    In: CEC 2011. IEEE, 2011. p. 2782-2789.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  172. Published

    High-temperature lead-free solder alternatives. / Nachiappan, Vivek Chidambaram; Hattel, Jesper Henri; Hald, John.

    In: Microelectronic Engineering, Vol. 88, No. 6, 2011, p. 981-989.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  173. Published

    Hole quality and burr reduction in drilling aluminium sheets. / Pilny, Lukas; De Chiffre, Leonardo; Piska, Miroslav; Villumsen, Morten F.

    In: International Conference NEWTECH 2011. 2011.

    Publication: Research › Article in proceedings – Annual report year: 2012

  174. Published

    Humidity insensitive TOPAS polymer fiber Bragg grating sensor. / Yuan, Scott Wu; Khan, Lutul; Webb, David J.; Kalli, Kyriacos; Rasmussen, Henrik K.; Stefani, Alessio; Bang, Ole.

    In: Optics Express, Vol. 19, No. 20, 2011, p. 19731-19739.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  175. Published

    Hybrid Search for Faster Production and Safer Process Conditions in Friction Stir Welding. / Tutum, Cem Celal (Invited author); Deb, Kalyanmoy (Invited author); Hattel, Jesper Henri (Invited author).

    In: Lecture Notes in Computer Science, Vol. 6457, 2011, p. 603-612.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  176. Published

    Introduction to computed tomography. / Cantatore, Angela; Müller, Pavel.

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 76 p.

    Publication: Research › Report – Annual report year: 2012

  177. Published

    Investigation of measuring strategies in computed tomography. / Müller, Pavel; Hiller, Jochen; Cantatore, Angela; De Chiffre, Leonardo.

    In: NEWTECH 2011: New Technologies in Manufacturing. 2011. p. 31-42.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  178. Published

    Investigation of the stability of melt flow in gating systems. / Tiedje, Niels Skat; Larsen, Per.

    In: Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, Vol. 42B, No. 1, 2011, p. 189-201.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  179. Published

    Measurement of micro moulded parts by Computed Tomography and comparison to optical and tactile techniques. / Yagüe, J.A.; Tosello, Guido; Carmignato, S; Ontiveros, S.; Jiménez, R.; Gasparin, Stefania; Hansen, Hans Nørgaard; Pierobon, A.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011. p. 76-79.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  180. Published

    Mechanical Contact Experiments and Simulations. / Nielsen, Chris Valentin; Martins, P; Zhang, W.; Bay, Niels.

    In: Steel Research International, Vol. 82, No. Special issue, 2011, p. 645-650.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  181. Published

    Micro Injection Moulding High Accuracy Three-Dimensional Simulations and Process Control. / Tosello, Guido (Invited author); Costa, F.S. (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: Proceedings of Polymer Process Engineering 11: Enhanced Polymer Processing. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  182. Published

    Modeling of flow of particles in a non-Newtonian fluid using lattice Boltzmann method. / Skocek, Jan; Svec, Oldrich; Spangenberg, Jon; Stang, Henrik; Geiker, Mette Rica; Roussel, N.; Hattel, Jesper Henri.

    In: Proceedings of the 8th International Congress on the Chemistry of Cement. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  183. Published

    Mode profiling of THz fibers with dynamic aperture near-field imaging. / Stecher, Matthias; Dürrschmidt, Stefan F.; Nielsen, Kristian; Stefani, Alessio; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole; Town, Graham E.; Koch, Martin.

    In: 2011 36th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, 2011. (Uden navn).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  184. Published

    Multi-Criteria Layout Synthesis of MEMS Devices Using Memetic Computing. / Tutum, Cem Celal; Fan, Zhun.

    In: 2011 IEEE Congress on Evolutionary Computation. IEEE, 2011. p. 902-908.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  185. Published

    Multiple height calibration artefact for 3D microscopy. / De Chiffre, Leonardo; Carli, Lorenzo; Eriksen, Rasmus Solmer.

    In: C I R P Annals, Vol. 60, No. 1, 2011, p. 535-538.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  186. Published

    Multistage single point incremental forming.. / Silva, M. Beatriz; Skjødt, Martin; Bay, Niels; Martins, Paulo A.F.

    In: Proceedings of the Congress on Numerical Methods in Engineering. Vol. Paper ID57 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  187. Published

    New lubricant systems for cold and warm forging – advantages and limitations. / Bay, Niels.

    In: Proceedings of the 12th International Cold Forging Congress. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  188. Published

    New Sol-Gel Coatings to Improve Casting Quality. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat (Supervisor).

    DTU Mechanical Engineering, 2011. 343 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2012

  189. Published

    New sol–gel refractory coatings on chemically-bonded sand cores for foundry applications to improve casting surface quality. / Nwaogu, Ugochukwu Chibuzoh; Poulsen, T.; Stage, R.K.; Bischoff, C.; Tiedje, Niels Skat.

    In: Surface and Coatings Technology, Vol. 205, No. 16, 2011, p. 4035-4044.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  190. Published

    Numerical Modeling of Fluid Flow in the Tape Casting Process. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: AIP Conference Proceedings - American Institute of Physics, Vol. 1389, No. 1, 2011, p. 143-146.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  191. Published

    Numerical optimisation of friction stir welding: review of future challenges. / Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Science and Technology of Welding and Joining (Online Edition), Vol. 16, No. 4, 2011, p. 318-324.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  192. Published

    Numerical simulation of lubrication mechanisms at mesoscopic scale. / Hubert, C.; Bay, Niels; Christiansen, Peter; Deltombe, R.; Dubar, L.; Dubar, M.; Dubois, A.

    In: AIP Conference Proceedings, Vol. 1353, 2011, p. 1729-1734.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  193. Published

    Optical fibre Bragg grating recorded in TOPAS cyclic olefin copolymer. / Johnson, I.P.; Yuan, Scott Wu; Stefani, Alessio; Nielsen, Kristian; Rasmussen, Henrik K.; Khan, L.; Webb, D.J.; Kalli, K.; Bang, Ole.

    In: Electronics Letters, Vol. 47, No. 4, 2011, p. 271-272.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  194. Published

    Optimization in Friction Stir Welding - With Emphasis on Thermo-mechanical Aspects. / Tutum, Cem Celal.

    LAP Lambert Academic Publishing, 2011. 232 p.

    Publication: Research - peer-review › Book – Annual report year: 2011

  195. Published

    Optimization of Casting Process Parameters for Homogeneous Aggregate Distribution in Self-Compacting Concrete: A Feasibility Study. / Spangenberg, Jon; Tutum, Cem Celal; Hattel, Jesper Henri; Roussel, Nicolas; Geiker, Mette Rica.

    In: CEC 2011. IEEE, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  196. Published

    Porous-core honeycomb bandgap THz fiber. / Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    In: Optics Letters, Vol. 36, No. 5, 2011, p. 666-668.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  197. Published

    Process Factors Influence on Cavity Pressure Behavior in Microinjection Moulding. / Griffiths, C. A.; Dimov, S. S.; Scholz, S.; Hirshy, H.; Tosello, Guido.

    In: Journal of Manufacturing Science and Engineering, Vol. 133, No. 3, 2011, p. 031007.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  198. Published

    Reference micro-objects and procedures to establish traceability in micro metrology : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Prantl, Manfred.

    2011. 44 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  199. Published

    Replication of micro and nano surface geometries. / Hansen, Hans Nørgaard; Hocken, R.J.; Tosello, Guido.

    In: C I R P Annals, Vol. 60, No. 2, 2011, p. 695-714.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  200. Published

    Replication quality control of metal and polymer micro structured optical surfaces. / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Vora, I. Di; Priante, S.; Sinesi, S.

    In: 4. International Swedish Production Symposium. 2011. p. 533-539.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  201. Published

    Report on condition and monitoring platform for effective process control techniques : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Tosello, Guido; Griffiths, C.

    2011. 93 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  202. Published

    Report on design rules of μ-tools for hybrid tooling : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Esmoris, Jose Ignacio; Azcarate, S.; Tosello, Guido; Bissacco, G; Quadroni, A.; Griffiths, C.

    2011. 60 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  203. Published

    Report on design rules of μ-tools for standard insert : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Tosello, Guido; Esmoris, Josa Ignacio; Quadroni, A.

    2011. 63 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  204. Published

    Report on experimental research and best practice for surface treatment solutions : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Gavillet, Jerome; Tosello, Guido; Gasparin, S.

    2011. 27 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  205. Published

    Report on tolerancing guidelines for micro manufacturing : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard.

    2011. 50 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2011

  206. Published

    Reproducibility of surface roughness in reaming. / Müller, Pavel; De Chiffre, Leonardo.

    In: Proceedings of the 4. Swedish Production Symposium. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  207. Published

    Reproducibility of surface roughness in reaming. / Müller, Pavel; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2011. 270 p.

    Publication: Research - peer-review › Report – Annual report year: 2011

  208. Published

    Resistance microwelding of 316L stainless steel wire to block. / Friis, Kasper Storgaard; Khan, M.I.; Bay, Niels; Zhou, Y.

    In: Science and Technology of Welding and Joining (Print), Vol. 16, No. 6, 2011, p. 546-552.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  209. Published

    Reversed planar elongation of soft polymeric networks. / Jensen, Mette Krog; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Hassager, Ole.

    In: Rheologica Acta, Vol. 50, No. 9-10, 2011, p. 729-740.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  210. Published

    Revisiting the Fundamentals and Capabilities of the Stack Compression Test. / Alves, L.M.; Nielsen, Chris Valentin; Martin, P.A.F.

    In: Experimental Mechanics, Vol. 51, 2011, p. 1565-1572.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  211. Published

    Scale effects in metal-forming friction and lubrication. / Nielsen, Peter Søe; Paldan, Nikolas Aulin; Calaon, Matteo; Bay, Niels.

    In: Institution of Mechanical Engineers. Proceedings. Part J: Journal of Engineering Tribology, Vol. 225, No. 9, 2011, p. 924-931.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  212. Published

    Selective metallization of polymers using laser induced surface activation (LISA)—characterization and optimization of porous surface topography. / Zhang, Yang; Hansen, Hans Nørgaard; De Grave, Arnaud; Tang, Peter Torben; Nielsen, Jacob S.

    In: International Journal of Advanced Manufacturing Technology, Vol. 55, No. 5-8, 2011, p. 573-580.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  213. Published

    Single Point Incremental Forming. / Siva, M. Beatriz; Bay, Niels; Martins, A.F.

    In: Sustainable Manufacturing. ed. / J. Paolo Davim. John Wiley & Sons Ltd, 2011. p. 173-209 (CAM Control Systems, Robotics and Manufacturing Series).

    Publication: Research - peer-review › Book chapter – Annual report year: 2011

  214. E-pub ahead of print

    Spontaneous Breakup of Extended Monodisperse Polymer Melts. / Rasmussen, Henrik K.; Yu, Kaijia.

    In: Physical Review Letters, Vol. 107, 2011, p. 126001.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  215. Published

    State-of-the-Art Multi-Objective Optimisation of Manufacturing Processes Based on Thermo-Mechanical Simulations. / Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Multi-objective Evolutionary Optimisation for Product Design and Manufacturing. ed. / Lihui Wang; Amos H.C. Ng; Kalyanmoy Deb. Vol. 1 Springer, 2011. p. 71-133.

    Publication: Research - peer-review › Book chapter – Annual report year: 2011

  216. Published

    Stress maximum and steady extensional flow of branched polymer melts. / Huang, Qian; Skov, Anne Ladegaard; Rasmussen, Henrik K.; Hoyle, David M.; McLeish, Thomas C.; Harlen, Oliver; Hassel, David; Lord, Tim D.; Mackley, Malcolm R.; Hassager, Ole.

    2011. Abstract from The Society of Rheology 83rd Annual Meeting : Symposium MB. Rheology of Polymer Melts and Blends, Cleveland, USA, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2011

  217. Published

    Surface Nano Structures Manufacture Using Batch Chemical Processing Methods for Tooling Applications. / Tosello, Guido (Invited author); Calaon, Matteo (Invited author); Gavillet, J. (Invited author); Tang, Peter Torben (Invited author); Ravn, Christian (Invited author); Tebby, Z. (Invited author); Dellea, O. (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: Proceedings of the 8th International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2011. p. 297-301.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  218. Published

    Surface topography analysis for dimensional quality control of replication at the micrometre scale. / Balcon, M.; Marinello, F.; Tosello, Guido; Carmignato, S.; Savio, E.

    In: 13th International Conference on Metrology and Properties of Engineering Surfaces. 2011. p. 194-198.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  219. E-pub ahead of print

    Suspension of Water Droplets on Individual Pillars. / Tóth, T.; Ferraro, D.; Chiarello, E.; Pierno, M.; Mistura, G.; Bissacco, Giuliano; Semprebon, C.

    In: Langmuir, 2011.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  220. Published

    Testing and modelling of new tribo-systems for industrial sheet forming of stainless steels. / Nielsen, Peter Søe; Friis, Kasper Storgaard; Bay, Niels.

    In: Institution of Mechanical Engineers. Proceedings. Part J: Journal of Engineering Tribology, Vol. 225, No. 10, 2011, p. 1036-1047.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  221. Published

    Testing a New Microporous Lubricant Carrier for Cold Forging. / Ceron, Ermanno; Bay, Niels; Arentoft, Mogens; Tang, Peter Torben.

    In: Steel Research International, Vol. 82, No. Special issue, 2011, p. 240-244.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  222. Published

    Test of Tribological Performance of Robot Assisted Polished Tool Surfaces. / Eriksen, Rasmus Solmer; Arentoft, Mogens; Grønbæk, J.; Bay, Niels.

    In: Steel Research International, Vol. 82, No. Special issue, 2011, p. 1108-1111.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  223. Published

    The dynamics of cylindrical samples in dual wind-up extensional rheometers. / Yu, Kaijia; Rasmussen, Henrik K.; Marín, Jose Manuel Román; Hassager, Ole.

    In: Journal of Rheology, Vol. 55, No. 3, 2011, p. 571-580.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  224. Published

    Three-Sheet Spot Welding of Advanced High-Strength Steels. / Nielsen, Chris Valentin; Friis, Kasper Storgaard; Zhang, W.; Bay, Niels.

    In: Welding Journal, Vol. 90, No. 2S, 2011, p. 32-40.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  225. Published

    Towards the first generation micro bulk forming system. / Arentoft, Mogens; Eriksen, Rasmus Solmer; Hansen, Hans Nørgaard; Paldan, Nikolas Aulin.

    In: C I R P Annals, Vol. 60, No. 1, 2011, p. 335-338.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  226. Published

    Traceable surface characterization using replica moulding technology. / Gasparin, Stefania (Invited author); Hansen, Hans Nørgaard (Invited author); Tosello, Guido (Invited author).

    In: 13th International Conference on Metrology and Properties of Engineering Surfaces. 2011. p. 310-315.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  227. Published

    Trends and Visions in Metal Forming Tribology. / Bay, Niels.

    In: Steel Research International, Vol. 82, No. Special issue, 2011, p. 15-26.

    Publication: Research - peer-review › Conference article – Annual report year: 2011

  228. Published

    Uncertainty evaluation for three-dimensional scanning electron microscope reconstructions based on the stereo-pair technique. / Carli, Lorenzo; Genta, G; Cantatore, Angela; Barbato, G; De Chiffre, Leonardo; Levi, R.

    In: Measurement Science and Technology, Vol. 22, No. 3, 2011, p. 035103.

    Publication: Research - peer-review › Journal article – Annual report year: 2011

  229. Published

    Validation of three-dimensional micro injection molding simulation accuracy. / Tosello, Guido (Invited author); Costa, F.S. (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: 27th World Congress of the Polymer Processing Society. 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  230. Published

    Verification of a CT scanner using a miniature step gauge. / Cantatore, Angela; Andreasen, J.L.; Carmignato, S.; Müller, Pavel; De Chiffre, Leonardo.

    In: Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen, 2011.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

  231. 2010
  232. Published

    Development of lead-free solders for high-temperature applications. / Chidambaram, Vivek; Hattel, Jesper Henri (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 92 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  233. Published

    Process optimization of friction stir welding based on thermal models. / Larsen, Anders Astrup; Stolpe, Mathias (Supervisor); Hattel, Jesper Henri (Supervisor); Sigmund, Ole (Supervisor).

    2010. 110 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  234. Published

    Advanced Anodising Technology (Avanceret Anodiserings Teknologi). / Tabrizian-Ghalehno, Naja; Møller, Per (Supervisor); Hansen, Hans Nørgaard (Supervisor); Ambat, Rajan (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  235. Published

    Optimization of Thermo-mechanical Conditions in Friction Stir Welding. / Tutum, Cem Celal; Hattel, Jesper Henri (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 193 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  236. Published

    3D modeling of dual wind-up extensional rheometers. / Yu, Kaijia; Román Marín, José Manuel; Rasmussen, Henrik K.; Hassager, Ole.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 165, No. 1-2, 2010, p. 14-23.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  237. Published

    3D-SEM Metrology for Coordinate Measurements at the Nanometer Scale. / Carli, Lorenzo; De Chiffre, Leonardo (Supervisor); Hansen, Hans Nørgaard (Supervisor); Horsewell, Andy (Supervisor); Dirscherl, Kai (Supervisor).

    DTU Mechanical Engineering, 2010. 266 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2011

  238. Published

    3D Simulation of Nano-Imprint Lithography. / Román Marín, José Manuel; Rasmussen, Henrik K.; Hassager, Ole.

    In: Nanoscale Research Letters, Vol. 5, No. 2, 2010, p. 274-278.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  239. Published

    A Casting Yield Optimization Case Study: Forging Ram. / Kotas, Petr; Tutum, Cem Celal; Hattel, Jesper Henri; Snajdrova, Olga; Thorborg, Jesper.

    In: International Journal of Metalcasting, Vol. 4, No. 4, 2010, p. 61-76.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  240. Published

    Accuracy optimization of high-speed AFM measurements using Design of Experiments. / Tosello, Guido (Invited author); Marinello, F. (Invited author); Hansen, Hans Nørgaard (Invited author); Antico, A. (Invited author).

    In: Proceedings of the euspen International Conference. 2010. p. 172-175.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  241. Published

    A comprehensive parameter study of an active magnetic regenerator using a 2D numerical model. / Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Smith, Anders; Pryds, Nini; Hattel, Jesper Henri.

    In: International Journal of Refrigeration, Vol. 33, No. 4, 2010, p. 753-764.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  242. Published

    A Multi-objective Optimization Application in Friction Stir Welding: Considering Thermo-mechanical Aspects. / Tutum, Cem Celal; Hattel, Jesper Henri.

    In: WCCI 2010: IEEE CEC 2010. Barcelona, Spain : IEEE, 2010. p. 427-434.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  243. Published

    Analysis and Modelling of Electrode Wear in Resistance Spot Welding. / Madsen, Anders (Invited author); Pedersen, Kim (Invited author); Friis, Kasper Storgaard (Invited author); Bay, Niels (Invited author).

    In: Proceed. 6. seminar on Advances in Resistance Welding. 2010. p. 159-173.

    Publication: Research › Article in proceedings – Annual report year: 2010

  244. Published

    An analytical model for force prediction in ball nose micro milling of inclined surfaces. / Bissacco, Giuliano (Invited author); Hansen, Hans Nørgaard (Invited author); De Chiffre, Leonardo (Invited author).

    In: Proceedings of 4th CIRP International Conference on High Performance Cutting. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  245. Published

    Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools. / Podgornik, B.; Zajec, B.; Bay, Niels; Vizintin, J.

    In: Tribology of Manufacturing Processes: Proceedings of the International Conference on Tribology in Manufacturing Processes. Vol. 1 2010. p. 249-260.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  246. Published

    A quantitative lubricant test for deep drawing. / Olsson, David Dam; Bay, Niels; Andreasen, Jan L.

    In: International Journal of Surface Science and Engineering, Vol. 4, No. 1, 2010, p. 2-12.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  247. Published

    Asperity deformation during running-in. / Jakobsen, Jørgen (Invited author); Sivebæk, Ion Marius (Invited author).

    In: Proceeding of Nordtrib 2010. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  248. Published

    Broadband polymer microstructured THz fiber coupler with downdoped cores. / Nielsen, Kristian; Rasmussen, Henrik K.; Bang, Ole; Jepsen, Peter Uhd.

    In: 35. International Conference on Infrared, Millimeter, and Terahertz Waves. IEEE, 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  249. Published

    Broadband terahertz fiber directional coupler. / Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    In: Optics Letters, Vol. 35, No. 17, 2010, p. 2879-2881.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  250. Published

    Cavity Pressure Behaviour in Micro Injection Moulding. / Griffiths, C.A.; Dimov, S.S.; Scholz, S.; Hirshy, H.; Tosello, Guido; Hansen, Hans Nørgaard; Williams, E.

    In: Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2010. p. 291-294.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  251. Published

    Characterization of Laser Machined Polymer Surface Using Bearing Area Curve Parameters for Future Plating. / Zhang, Yang; Hansen, Hans Nørgaard; De Grave, Arnaud; Tang, Peter Torben; Nielsen, Jakob Skov.

    In: ICOMM/4M2010. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  252. Published

    Constraints on the Adiabatic Temperature Change in Magnetocaloric Materials. / Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Smith, Anders.

    In: Physical Review B (Condensed Matter and Materials Physics), Vol. 81, No. 5, 2010, p. 054423.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  253. Published

    Design of lead-free candidate alloys for high-temperature soldering based on the Au–Sn system. / Chidambaram, Vivek; Hattel, Jesper Henri; Hald, John.

    In: Materials & Design, Vol. 31, No. 10, 2010, p. 4638-4645.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  254. Published

    Development of Au-Ge based candidate alloys as an alternative to high-lead content solders. / Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri.

    In: Journal of Alloys and Compounds, Vol. 490, No. 1-2, 2010, p. 170-179.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  255. Published

    Direct testing of scale effects in metal forming friction and lubrication. / Nielsen, Peter Søe; Calaon, Matteo; Paldan, Nikolas Aulin; Bay, Niels.

    In: Tribology of Manufacturing Processes. 2010. p. 497-506.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  256. Published

    Does the interchain pressure effect exist in flow of polymer melt?. / Rasmussen, Henrik K. (Invited author); Hassager, Ole (Invited author).

    In: AERC 2010. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  257. Published

    Effects of moulding and environmental conditions on the mechanical and surface properties of injection moulded santoprene rubber. / Islam, Aminul; Ruby, Tobias M.; Jessen, Rikke L.

    2010. Poster session presented at Polymers in Process and Products, Lyngby, DTU, .

    Publication: Research › Poster – Annual report year: 2010

  258. Published

    Effects of organic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheet. / Nwaogu, Ugochukwu Chibuzoh; Blawert, C.; Scharnagl, N.; Dietzel, W.; Kainer, K. U.

    In: Corrosion Science, Vol. 52, No. 6, 2010, p. 2143-2154.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  259. Published

    Electroless Plating on Plastic Induced by Selective Laser Activation. / Zhang, Yang; Tang, Peter Torben; Hansen, Hans Nørgaard; Nielsen, Jakob Skov.

    In: Plating and Surface Finishing, Vol. 97, No. 2, 2010, p. 43-47.

    Publication: Research - peer-review › Conference article – Annual report year: 2010

  260. Published

    Emission of organic compounds from mould and core binders used for casting iron, aluminium and bronze in sand moulds. / Tiedje, Niels Skat; Crepaz, Rudolf; Eggert, Torben; Bey, Niki.

    In: Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering, Vol. 45, No. 14, 2010, p. 1866-1876.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  261. Published

    End of life environmental assessment of micro technologies: the need for the carrot or the stick?. / De Grave, Arnaud; Gentil, Emmanuel; Hansen, Hans Nørgaard.

    In: 4M 2010. rps online, 2010. p. 143-146.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  262. Published

    Environmentally Benign Lubricant Systems For Cold, Warm And Hot Forging : Keynote paper. / Bay, Niels (Invited author).

    In: Proceedings of the 30th SENAFOR: 14th International Forging Conference. Vol. 1 2010. p. 297-313.

    Publication: Research › Article in proceedings – Annual report year: 2010

  263. Published

    Environmentally Benign Lubricant Systems for Sheet Metal Stamping : Keynote paper. / Bay, Niels (Invited author).

    In: Proceedings 30. SENAFOR: 13. Nat. Sheet Metal Forming Conf.. Vol. 2 2010. p. 273-295.

    Publication: Research › Article in proceedings – Annual report year: 2010

  264. Published

    Environmentally Benign Tribo-systems for Metal Forming : Keynote paper. / Bay, Niels; Azushima, A.; Groche, P.; Ishibashi, I.; Merklein, M.; Morishita, H.; Nakamura, T.; Schmid, S.; Yoshida, M.

    In: C I R P Annals, Vol. 59, No. 2, 2010, p. 760-780.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  265. Published

    Error sources in atomic force microscopy for dimensional measurements: Taxonomy and modeling. / Marinello, F.; Voltan, A.; Savio, E.; Carmignato, S.; De Chiffre, Leonardo.

    In: Journal of Manufacturing Science and Engineering, Vol. 132, No. 3, 2010, p. 0309031-0309038.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  266. Published

    Experimental evaluation of the pure configurational stress assumption in the flow dynamics of entangled polymer melts. / Rasmussen, Henrik K.; Bejenariu, Anca Gabriela; Hassager, Ole; Auhl, D.

    In: Journal of Rheology, Vol. 54, No. 6, 2010, p. 1325-1336.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  267. Published

    Experimental investigation of the factors influencing the polymer-polymer bond strength during two-component injection moulding. / Islam, Aminul; Hansen, Hans Nørgaard; Bondo, Martin.

    In: International Journal of Advanced Manufacturing Technology, 2010.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  268. Published

    Experimental investigation on the influence of instrument settings on pixel size and nonlinearity in SEM image formation. / Carli, Lorenzo; Genta, Gianfranco; Cantatore, Angela; Barbato, Giulio; De Chiffre, Leonardo; Levi, Raffaello.

    In: Proceedings of the 10th euspen International Conference. Vol. 1 2010. p. 192-195.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  269. Published

    Extension of cylindrical samples in the Sentmanat Extensional Rheometer (SER). / Yu, Kaijia (Invited author); Marin, Jose Manuel Roman (Invited author); Jensen, Mette Krog (Invited author); Rasmussen, Henrik K. (Invited author); Hassager, Ole (Invited author).

    2010. Abstract from 6th Annual European Rheology Conference, Göteborg, Sweden.

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2010

  270. Published

    Friction in sheet metal forming : A Comparison between milled and manually polished surfaces. / Wiklund, D.; Liljebgren, M.; Berglund, J.; Bay, Niels; Kjellsson, K.; Rosén, B.-G.

    In: ICTMP 2010. Vol. 2 2010. p. 613-622.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  271. Published

    Green Lubricants for Metal Forming : Keynote paper. / Bay, Niels (Invited author).

    In: Tribology of Manufacturing Processes: Proceedings of the International Conference on Tribology in Manufacturing Processes. Vol. 1 2010. p. 5-33.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  272. Published

    Influence of annealing and deformation on optical properties of ultra precision diamond turned and anodized 6060 aluminium alloy. / Tabrizian-Ghalehno, Naja; Hansen, Hans Nørgaard; Hansen, P.E.; Ambat, Rajan; Møller, Per.

    In: Surface and Coatings Technology, Vol. 204, No. 16-17, 2010, p. 2632-2638.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  273. Published

    Influence of New Sol-gel Refractory Coating on the Casting Properties of Cold Box and Furan Cores for Grey Cast iron.. / Nwaogu, Ugochukwu Chibuzoh (Invited author); Poulsen, T. (Invited author); Bischoff, C (Invited author); Tiedje, Niels Skat (Invited author).

    In: WFC2010. Vol. Session 5-8 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  274. E-pub ahead of print

    Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels. / Wadman, Boel; Eriksen, J.; Olsson, M.; Schedin, Erik; Madsen, Erik; Bay, Niels.

    In: Proceedings Duplex World 2010 Conference & Exhibition. 2010. p. IV.B.7.

    Publication: Research › Article in proceedings – Annual report year: 2010

  275. Published

    Influences of lubricant pocket geometry and working conditions upon micro lubrication mechanisms in upsetting and strip drawing. / Shimizu, Ichiro; Martins, P. A. F.; Bay, Niels; Andresen, Jan Lasson; Bech, Jakob Ilsted.

    In: International Journal of Surface Science and Engineering, Vol. 4, No. 1, 2010, p. 42-54.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  276. Published

    In-line monitoring and reverse 3D model reconstruction in additive manufacturing. / Pedersen, David Bue (Invited author); Hansen, Hans Nørgaard (Invited author); Nielsen, Jakob Skov (Invited author).

    In: IWMF2010. 2010. p. 1-7.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  277. Published

    Integrating measuring uncertainty of tactile and optical coordinate measuring machines in the process capability assessment of micro injection moulding. / Tosello, Guido; Hansen, Hans Nørgaard; Gasparin, Stefania.

    In: 10. International Conference of the European Society for Precision Engineering and Nanotechnology. 2010. p. 168-171.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  278. Published

    Investigation on a replica step gauge for optical 3D scanning of micro parts. / Cantatore, Angela (Invited author); De Chiffre, Leonardo (Invited author); Carmignato, S. (Invited author).

    In: Proceedings of the euspen International Conference. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  279. Published

    Large Amplitude Oscillatory Extension of Soft Polymeric Networks. / Bejenariu, Anca Gabriela; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Hassager, Ole; Frankær, Sarah Maria.

    In: Rheologica Acta, Vol. 49, No. 8, 2010, p. 807-814.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  280. Published

    Laser Induced Selective Activation For Subsequent Autocatalytic Electroless Plating. / Zhang, Yang; Hansen, Hans Nørgaard (Supervisor); Tang, Peter Torben (Supervisor); De Grave, Arnaud (Supervisor).

    DTU Mechanical Engineering, 2010.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  281. Published

    Micro-Bulk Forming. / Arentoft, Mogens; Eriksen, Rasmus Solmer; Hansen, Hans Nørgaard.

    In: Micromanufacturing Engineering and Technology. ed. / Yi Qin. Oxford : Elsevier Limited, 2010. p. 114-129.

    Publication: Research - peer-review › Book chapter – Annual report year: 2010

  282. Published

    Micro Injection Moulding. / Tosello, Guido; Hansen, Hans Nørgaard.

    In: Micro-Manufacturing Engineering and Technology. ed. / Yi Qin. Elsevier Science, 2010. p. 90-113.

    Publication: Research - peer-review › Book chapter – Annual report year: 2010

  283. Published

    Micro Mechanical Assembly. / Hansen, Hans Nørgaard; Arentoft, Mogens; Tosello, Guido; Gegeckaite, Asta.

    In: Micromanufacturing Engineering and Technology. ed. / Yi Qin. Elsevier Science, 2010. p. 174-184.

    Publication: Research - peer-review › Book chapter – Annual report year: 2010

  284. Published

    Milled Die Steel Surface Roughness Correlation with Steel Sheet Friction. / Berglund, J.; Brown, C.A.; Rosén, B.-G.; Bay, Niels.

    In: C I R P Annals, Vol. 59, No. 1, 2010, p. 577-580.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  285. Published

    Modeling of dual cylinder wind-up extensional rheometers. / Yu, Kaijia (Invited author); Marin, Jose (Invited author); Jensen, Mette (Invited author); Rasmussen, Henrik K. (Invited author); Hassager, Ole (Invited author).

    2010. Abstract from The Society of Rheology 82nd Annual Meeting, Santa Fe, New Mexico, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2010

  286. Published

    Multi-objective Optimization of Process Parameters in Friction Stir Welding. / Tutum, Cem Celal; Hattel, Jesper Henri.

    2010. Poster session presented at Genetic and Evolutionary Computation Conference 2010, Portland, OR, United States.

    Publication: Research - peer-review › Poster – Annual report year: 2010

  287. Published

    Numerical modeling and analysis of the active magnetic regenerator. / Nielsen, Kaspar Kirstein; Hattel, Jesper Henri (Supervisor); Pryds, Nini (Supervisor); Bahl, Christian Robert Haffenden (Supervisor); Smith, Anders (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010. 399 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  288. Published

    Numerical modeling of graded active magnetic regenerators. / Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Engelbrecht, Kurt; Smith, Anders; Pryds, Nini; Hattel, Jesper Henri.

    In: Thermag IV. 2010. p. 445-453.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  289. Published

    Optimisation of process parameters in friction stir welding based on residual stress analysis: a feasibility study. / Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Science and Technology of Welding and Joining (Online Edition), Vol. 15, No. 5, 2010, p. 369-377.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  290. Published

    Planar elongation of soft polymeric networks. / Jensen, Mette Krog; Hassager, Ole; Rasmussen, Henrik K.; Skov, Anne Ladegaard; Bach, Anders; Koldbech, Henning Vitus.

    In: Rheologica Acta, Vol. 49, No. 1, 2010, p. 1-13.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  291. Published

    Polymer friction Molecular Dynamics. / Sivebæk, Ion Marius (Invited author); Samoilov, Vladimir N. (Invited author); Persson, Bo N. J. (Invited author).

    2010. Poster session presented at FANAS workshop, Saarbrucken, .

    Publication: Research - peer-review › Poster – Annual report year: 2010

  292. Published

    Polymeric liquids in extension: fluid mechanics or rheometry?. / Hassager, Ole; Marin, Jose Martin Roman; Yu, Kaijia; Rasmussen, Henrik K.

    In: Rheologica Acta, Vol. 49, No. 6, 2010, p. 543-554.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  293. Published

    Prediction of the impact of flow induced inhomogeneities in Self Compacting Concrete (SCC). / Spangenberg, Jon (Invited author); Roussel, N. (Invited author); Hattel, Jesper Henri (Invited author); Thorborg, Jesper (Invited author); Geiker, Mette Rica (Invited author); Stang, Henrik (Invited author); Skocek, Jan (Invited author).

    In: SCC2010. Vol. 1 Rilem publications, 2010. p. 209-215.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  294. Published

    Process Condition Monitoring of Micro Moulding Using a Two-plunger Micro Injection Moulding Machine. / Tosello, Guido; Hansen, Hans Nørgaard; Guerrier, Patrick.

    In: Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2010. p. 283-286.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  295. Published

    Process control and product evaluation in micro molding using a screwless/two-plunger injection unit. / Tosello, Guido (Invited author); Hansen, Hans Nørgaard (Invited author); Dormann, B. (Invited author); Decker, C. (Invited author); Guerrier, Patrick (Invited author).

    In: ANTEC2010. Society of Plastics Engineers Incorporated (SPE), 2010. p. 2161-2166.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  296. Published

    Replication and dimensional quality control of industrial nanoscale surfaces using calibrated AFM measurements and SEM image processing. / Tosello, Guido; Hansen, Hans Nørgaard; Marinello, F.; Gasparin, Stefania.

    In: C I R P Annals, Vol. 59, No. 1, 2010, p. 563-568.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  297. Published

    Report on best practice for improved μ-IM injection moulding simulation : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Tosello, Guido; Costa, Franco; Hansen, Hans Nørgaard.

    2010. 100 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2010

  298. Published

    Report on converging insert moulding with µ-IM : COTECH D5.2.1. / Islam, Aminul.

    1st ed. Vienna : COTECH, 2010. 47 p. (COTECH Deliverables; No. SP5).

    Publication: Research - peer-review › Report – Annual report year: 2010

  299. Published

    Report on non-destructive traceable measuring technologies for micro systems metrology : Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Prantl, Mnafred; Whiterside, Ben.

    2010. 151 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2010

  300. Published

    Report on tool transfer and alignment methods : FInal. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2). / Tosello, Guido; Gasparin, Stefania; De Grave, Arnaud; Hansen, Hans Nørgaard.

    2010. 42 p. (COnverging TECHnologies for micro systems manufacturing).

    Publication: Research - peer-review › Report – Annual report year: 2010

  301. Published

    Resistance Welding of Advanced Materials and Micro Components. / Friis, Kasper Storgaard; Kristensen, Jens Klæstrup (Supervisor); Link, Norbert Joseph (Supervisor); Pantleon, Karen (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2010. 281 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  302. Published

    Reversed extensional flow on polyisoprene melts. / Bejenariu, Anca Gabriela; Rasmussen, Henrik K.; Auhl, Dietmar; Skov, Anne Ladegaard; Hassager, Ole.

    In: Nordic Rheology Conference. 2010.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  303. Published

    Reversed extensional flow on polyisoprene melts. / Bejenariu, Anca Gabriela; Rasmussen, Henrik K.; Auhl, Dietmar; Skov, Anne Ladegaard; Hassager, Ole.

    2010. Poster session presented at 6th Annual European Rheology Conference, Göteborg, Sweden.

    Publication: Research › Poster – Annual report year: 2010

  304. Published

    Reversible large amplitude planar extension of soft elastomers. / Jensen, Mette Krog (Invited author); Skov, Anne Ladegaard (Invited author); Rasmussen, Henrik K. (Invited author); Hassager, Ole (Invited author).

    2010. Abstract from The Society of Rheology 82nd Annual Meeting : Session Polymer Rheology: Melts, Solutions and Blends, Santa Fe, New Mexico, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2010

  305. Published

    Reversible planar elongational of soft polymeric networks. / Jensen, Mette Krog (Invited author); Skov, Anne Ladegaard (Invited author); Rasmussen, Henrik K. (Invited author); Hassager, Ole (Invited author).

    2010. Abstract from 6th Annual European Rheology Conference, Göteborg, Sweden.

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2010

  306. Published

    Solidification, processing and properties of ductile cast iron. / Tiedje, Niels Skat.

    In: Materials Science and Technology, Vol. 26, No. 5, 2010, p. 505-514.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  307. Published

    Spatially resolved measurements of the magnetocaloric effect and the local magnetic field using thermography. / Christensen, Dennis; Bjørk, Rasmus; Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Smith, Anders; Clausen, Sønnik.

    In: Journal of Applied Physics, Vol. 108, No. 6, 2010, p. 063913.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  308. Published

    Squeezing Molecularly thin Lubricant Films between curved Corrugated Surfaces with long range Elasticity. / Sivebæk, Ion Marius; Samoilov, Vladimir N.; Persson, Bo N. J.

    In: 14th Nordic Symposium on Tribology - Nordtrib 2010. 2010. p. 0172.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2010

  309. Published

    Strategic surface topographies for enhanced lubrication in sheet forming of stainless steel. / Nilsson, Morten Sixten; Olsson, David Dam; Petrushina, Irina; Andreasen, Jan L.; Bay, Niels; Christensen, Erik; Bjerrum, Niels.

    In: International Journal of Surface Science and Engineering, Vol. 4, No. 1, 2010, p. 68-79.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  310. Published

    Strategies and limits in multi-stage single-point incremental forming. / Skjødt, Martin; Silva, M.B.; Martins, P. A. F.; Bay, Niels.

    In: Journal of Strain Analysis for Engineering Design, Vol. 45, No. 1, 2010, p. 33-44.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  311. Published

    Study of process parameters effect on the filling phase of micro injection moulding using weld lines as flow markers. / Tosello, Guido; Gava, Alberto; Hansen, Hans Nørgaard; Lucchetta, Giovanni.

    In: International Journal of Advanced Manufacturing Technology, Vol. 47, No. 1-4, 2010, p. 81-97.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  312. Published

    Surface texture metrology for high precision surfaces. / Hansen, Hans Nørgaard (Invited author); Gasparin, Stefania (Invited author); Tosello, Guido (Invited author).

    In: ICMC 2010: Sustainable Production for Resource Efficiencyand Ecomobility. ed. / Reimund Neugebauer. Fraunhofer IWU, 2010. p. 427-434.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  313. Published

    Sustainability of Micro-Manufacturing Technologies. / De Grave, Arnaud; Olsen, Stig Irving; Hansen, Hans Nørgaard; Arentoft, Mogens.

    In: Micromanufacturing Engineering and Technology. ed. / Yi Qin. Elsevier Science, 2010. p. 394-404.

    Publication: Research - peer-review › Book chapter – Annual report year: 2010

  314. Published

    Tactile and visual perception of injection moulded plastic parts : Tactile and visual perception. / Islam, Aminul (Supervisor); Jensen, Jacob Tobias; Akbas, Erkan; Madsen, Mads.

    DTU : Department of Mechanical Engineering, 2010. 28 p.

    Publication: Research › Report – Annual report year: 2010

  315. Published

    The demagnetizing field of a non-uniform rectangular prism. / Smith, Anders; Nielsen, Kaspar Kirstein; Christensen, Dennis; Bahl, Christian Robert Haffenden; Bjørk, Rasmus; Hattel, Jesper Henri.

    In: Journal of Applied Physics, Vol. 107, No. 10, 2010, p. 103910.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  316. Published

    The Effect of Grinding and Polishing Procedure of Tool Steels in Sheet Metal Forming. / Lindvall, F.; Bergström, J.; Krakhmalev, P.; Bay, Niels.

    In: ICTMP 2010. Nice, 2010. p. 603-612.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  317. Published

    The infuence of the sliding velocity on the friction of confined polymers. / Sivebæk, Ion Marius (Author); Samoilov, Vladimir N. (Author); Persson, Bo N. J. (Author).

    2010. PTS Polymer Tribology, 01-01-10.

    Publication: Research › Sound/Visual production (digital) – Annual report year: 2010

  318. Published

    Tolerance Verification of Micro and Nano Structures on Polycarbonate Substrates. / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard.

    In: Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2010. p. 387-390.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  319. Published

    Tool degradation during sheet metal forming of three stainless steel alloys. / Wadman, Boel; Nielsen, Peter Søe; Wiklund, Daniel; Bay, Niels; Madsen, Erik; Schedin, Erik.

    In: IDDRG 2010. 2010. p. 265-274.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  320. Published

    Tooling process chains and concepts. / Hansen, Hans Nørgaard; Arentoft, Mogens; Tang, Peter Torben; Bissacco, Giuliano; Tosello, Guido.

    In: Micromanufacturing Engineering and Technology. ed. / Yi Qin. Elsevier Science, 2010. p. 287-297.

    Publication: Research - peer-review › Book chapter – Annual report year: 2010

  321. Published

    Tooling technology for bulk forming of micro components. / Eriksen, Rasmus Solmer; Hansen, Hans Nørgaard (Supervisor); Bissacco, Giuliano (Supervisor); Arentoft, Mogens (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2010.

    Publication: Research › Ph.d. thesis – Annual report year: 2010

  322. Published

    Towards the effective tool wear control in micro-EDM milling. / Bissacco, Giuliano; Valentincic, J.; Hansen, Hans Nørgaard; Wiwe, B. D.

    In: International Journal of Advanced Manufacturing Technology, Vol. 47, No. 1-4, 2010, p. 3-9.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  323. Published

    Tribological influence of tool surface roughness within microforming. / Eriksen, Rasmus Solmer; Weidel, S.; Hansen, Hans Nørgaard.

    In: International Journal of Material Forming, Vol. 3, No. SUPPL. 1, 2010, p. 419-422.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  324. Published

    Tribological influence of tool surface topography within microforming. / Eriksen, Rasmus Solmer; Weidel, Stephan; Hansen, Hans Nørgaard.

    In: International Journal of Material Forming, Vol. 2, 2010.

    Publication: Research - peer-review › Conference article – Annual report year: 2010

  325. Published

    Two Component Injection Moulding for Moulded Interconnect Devices. / Islam, Aminul.

    1 ed. 66123 Saarbrücken, Germany : LAP LAMBERT Academic Publishing AG & Co. KG, 2010. 208 p.

    Publication: Research - peer-review › Book – Annual report year: 2010

  326. Published

    Two-component microinjection moulding for MID fabrication. / Islam, Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben; Jørgensen, M.B.; Ørts, S.F.

    In: Plastics, Rubber & Composites, Vol. 39, No. 7, 2010, p. 300-307.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  327. Published

    Udvikling af materialer til affaldsforbrænding – Nye materialer til overlagssvejsning. : Slutrapport for PSO 5806. / Tiedje, Niels Skat.

    DTU Mekanik, 2010. 33 p.

    Publication: Research › Report – Annual report year: 2010

  328. Published

    Uncertainty analysis of point-by-point sampling complex surfaces using touch probe CMMs DOE for complex surfaces verification with CMM. / Barini, Emanuele Modesto; Tosello, Guido; De Chiffre, Leonardo.

    In: Precision Engineering, Vol. 34, No. 1, 2010, p. 16-21.

    Publication: Research - peer-review › Conference article – Annual report year: 2010

  329. Published

    Use of reference objects for correction of measuring errors in X-ray computed tomography. / Müller, Pavel.

    Kgs.Lyngby : DTU Mechanical Engineering, 2010. 39 p.

    Publication: Research › Report – Annual report year: 2010

  330. Published

    Using Molecular Dynamics in polymer friction. / Sivebæk, Ion Marius (Author).

    2010. S-DK Tribology days at MAN, 01-01-10.

    Publication: Research › Sound/Visual production (digital) – Annual report year: 2010

  331. Published

    Velocity Dependence of Friction of Confined Hydrocarbons. / Sivebæk, Ion Marius; Samoilov, Vladimir N.; Persson, Bo N. J.

    In: Langmuir, Vol. 26, No. 11, 2010, p. 8721-8728.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  332. Published

    Ventilation rates in the bedrooms of 500 Danish children. / Bekö, Gabriel; Lund, Torben; Nors, F.; Toftum, Jørn; Clausen, Geo.

    In: Building and Environment, Vol. 45, No. 10, 2010, p. 2289-2295.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  333. 2009
  334. Published

    Processability, Microstruc ture and Impact Properties of Injectionmoulded Poly(oxymethylene). / Laursen, Jens Lolle; Vigild, Martin Etchells (Supervisor); Christoffersen, Lasse Wengel (Supervisor); Brøndsted, Povl (Supervisor); Horsewell, Andy (Supervisor); Sivebæk, Ion Marius (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2009. 136 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2009

  335. Published

    2-dimensional numerical modeling of active magnetic regeneration. / Nielsen, Kaspar Kirstein; Pryds, Nini; Smith, Anders; Bahl, Christian Robert Haffenden; Hattel, Jesper Henri.

    In: 3rd International Conference on Magnetic Refrigeration at Room Temperature. Vol. 1 1. ed. IIF-IIR, 2009. p. 251-258.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  336. Published

    2k micro moulding for MID fabrication. / Islam, Aminul; Hansen, Hans Nørgaard; Jørgensen, Martin Bondo.

    In: Polymer Process Engineering 09: PPE-Enhanced polymer processing. Vol. 1 1. ed. Bradford : University of Bradford, 2009. p. 273-293.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  337. Published

    3-D Analysis of Graphite Nodules in Ductile Cast Iron Using FIB-SEM. / D'Angelo, Luca; Jespersen, Freja N.; MacDonald, A. Nicole; da Silva Fanta, Alice Bastos; Horsewell, Andy; Tiedje, Niels Skat.

    2009. Abstract from European Congress on Advanced Materials and Processes 2009, Glasgow, United Kingdom.

    Publication: Research › Conference abstract for conference – Annual report year: 2009

  338. Published

    A Corrosion Investigation of Solder Candidates for High-Temperature Applications. / Chidambaram, Vivek; Hald, John; Ambat, Rajan; Hattel, Jesper Henri.

    In: JOM: The Member Journal of TMS, Vol. 61, No. 6, 2009, p. 59-65.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  339. Published

    Active Magnetic Regenerative Refrigeration. / Nielsen, Kaspar Kirstein; Engelbrecht, Kurt; Bahl, Christian Robert Haffenden; Smith, Anders; Pryds, Nini; Hattel, Jesper Henri.

    2009. Poster session presented at 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Krakow, Poland.

    Publication: Research › Poster – Annual report year: 2009

  340. Published

    A Feasibility Study of Lead Free Solders for Level 1 Packaging Applications. / Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri.

    In: Journal of Microelectronics and Electronic Packaging, Vol. 6, No. 1, 2009, p. 75-82.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  341. Published

    Analyse experimentale des flux des fonte G.I. dans les systèmes d´alimentation à débit Côntrolé. / Skov-Hansen, Søren; Green, Nick R.; Tiedje, Niels Skat.

    In: Hommes et Fonderie, Vol. 396, 2009, p. 9-16.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  342. Published

    A new lubricant carrier for metal forming. / Arentoft, Mogens; Bay, Niels; Tang, Peter Torben; Jensen, J. D.

    In: C I R P Annals, Vol. 58, No. 1, 2009, p. 243-246.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  343. Published

    Applications of dimensional micro metrology to the product and process quality control in manufacturing of precision polymer micro components. / Tosello, Guido; Hansen, Hans Nørgaard; Gasparin, Stefania.

    In: C I R P Annals, Vol. 58, No. 1, 2009, p. 467-472.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  344. Published

    A product-model supporting coupling's management during microproduct design. / Museau, Matthieu; De Grave, Arnaud; Masclet, Cedric; Paris, Henri.

    In: International Journal of Design Engineering, Vol. 2, No. 4, 2009, p. 398-413.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  345. Published

    A profiling platform at 915, 1075, and 1090nm. / Pedersen, David Bue; Hansen, Klaus Schütt; Nielsen, Jakob Skov; Olsen, Flemming Ove; Hansen, Hans Nørgaard.

    In: 12th NOLAMP conference 2009. 2009.

    Publication: Research › Article in proceedings – Annual report year: 2009

  346. Published

    A Shape Optimization Study for Tool Design in Resistance Welding. / Bogomolny, Michael; Bendsøe, Martin P.; Hattel, Jesper Henri.

    In: Structural and Multidisciplinary Optimization, Vol. 38, No. 2, 2009, p. 185-194.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  347. Published

    Assessment of potential solder candidates for high temperature applications. / Chidambaram, Vivek (Author); Hald, John (Author); Hattel, Jesper Henri (Author).

    2009. International Conference on Phase diagram calculations and thermochemistry, Prague, Czech Republic, 01-01-09.

    Publication: Research › Sound/Visual production (digital) – Annual report year: 2009

  348. Published

    Au-Ge based Candidate Alloys for High-Temperature Lead-Free Solder Alternatives. / Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri.

    In: 2009 International Symposium on Microelectronics. International Microelectronics and packaging Society, 2009. p. 000338-000345.

    Publication: Research › Article in proceedings – Annual report year: 2009

  349. Published

    Best practice strategies for validation of micro moulding process simulation. / Costa, Franco; Tosello, Guido; Whiteside, Ben.

    2009. 28 p. (Report for FP7 EU project COTECH “Converging Technologies for Micro Systems Manufacturing").

    Publication: Research - peer-review › Report – Annual report year: 2009

  350. Published

    Best practice strategies for validation of micro moulding process simulation. / Costa, Franco (Invited author); Tosello, Guido (Invited author); Whiteside, Ben (Invited author).

    In: Proceedings of PPE'09: Polymer Process Engineering ‘09 Conference. ed. / Phil Coates, Prof.Bradford (United Kingdom) : University of Bradford, 2009. p. 331-364.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  351. Published

    Characterization and analysis of micro channels and sub-micron surface roughness of injection moulded microfluidic systems using optical metrology. / Tosello, Guido (Invited author); Marinello, Francesco (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: Proceedings of PPE'09: Polymer Process Engineering ‘09 Conference. ed. / Phil Coates, Prof.Bradford (United Kingdom) : University of Bradford, 2009. p. 199-232.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  352. Published

    Characterization and analysis of sub-micron surface roughness of injection moulded microfluidic systems using White Light Interferometry. / Tosello, Guido; Marinello, Francesco; Hansen, Hans Nørgaard.

    In: Proceedings of 12th International Conference on Metrology & Properties of Engineering Surfaces. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  353. Published

    Characterization and analysis of weld lines on micro-injection moulded parts using atomic force microscopy (AFM). / Tosello, Guido; Gava, Alberto; Hansen, Hans Nørgaard; Lucchetta, Giovanni; Marinello, Francesco.

    In: Wear, Vol. 266, No. 5-6, 2009, p. 534-538.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  354. Published

    Characterization of Coated Sand Cores from Two Different Binder Systems for Grey Iron Castings. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat; Poulsen, Thomas; Bischoff, Claus.

    2009. Poster session presented at European Congress on Advanced Materials and Processes 2009, Glasgow, United Kingdom.

    Publication: Research › Poster – Annual report year: 2009

  355. Published

    Concurrent engineering in micro manufacturing. / De Grave, Arnaud (Author).

    2009. 4M Sandpitting at the MMLive event, 01-01-08.

    Publication: Research › Sound/Visual production (digital) – Annual report year: 2009

  356. Published

    COUPLED ATOMIZATION AND SPRAY MODELLING IN THE SPRAY FORMING PROCESS USING OPENFOAM. / Gjesing, Rasmus; Hattel, Jesper Henri; Fritsching, Udo.

    In: ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, Vol. 3, No. 4, 2009, p. 471-486.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  357. Published

    Development of Focused Ion Beam technique for high speed steel 3D-SEM artefact fabrication. / Carli, Lorenzo (Invited author); MacDonald, A. Nicole (Invited author); De Chiffre, Leonardo (Invited author); Marinello, F. (Invited author); Carmignato, S. (Invited author); Horsewell, Andy (Invited author).

    In: Proceedings of the euspen International Conference. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  358. Published

    Development of gold based solder candidates for flip chip assembly. / Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri.

    In: Microelectronics Reliability, Vol. 49, No. 3, 2009, p. 323.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  359. Published

    Dispersion-tailored, low-loss photonic crystal fibers for the THz range. / Nielsen, Kristian; Rasmussen, Henrik K.; Adam, Aurèle J.L.; Planken, Paul C.M.; Bang, Ole; Jepsen, Peter Uhd.

    In: Proceedings, OTST. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  360. Published

    éalisation de micro systèmes passifs par technologies non silicium. / De Grave, Arnaud (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: Actes du 19eme Congrès Français de Mécanique. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  361. Published

    EcoDesign and LCA approach toward sustainable micro products development. / De Grave, Arnaud; Olsen, Stig Irving; Hansen, Hans Nørgaard.

    In: Proceedings of the MIT2009: 10th International conference on Management of Innovative Technologies. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  362. Published

    Effects of tool die surface topography on friction and galling in sheet metal forming. / Wiklund, D.; Liljengren, M.; Bay, Niels; Kjellsson, K.; Rosén, B-G.

    In: Proceed. of the Swedish Production Symp.: SPS ’09. 2009. p. 178-183.

    Publication: Research › Article in proceedings – Annual report year: 2009

  363. Published

    Electroless Plating on Plastic Induced by Selective Laser Activation. / Zhang, Yang; Tang, Peter Torben; Hansen, Hans Nørgaard; Nielsen, Jakob Skov.

    In: Electroless Plating on Plastic Induced by Selective Laser Activation. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  364. Published

    Elongational dynamics of multiarm polystyrene. / Rasmussen, Henrik K.; Skov, Anne Ladegaard; Nielsen, Jens Kromann; Laille, Phillippe.

    In: Journal of Rheology, Vol. 53, No. 2, 2009, p. 401-415.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  365. Published

    Environmentally friendly tribo-systems in bulk metal forming. / Bay, Niels (Invited author); Nakamura, Tamotsu (Invited author); Ishibashi, I. (Invited author); Yoshida, M. (Invited author); Morishita, M. (Invited author).

    In: New Developments in Forging Technology. ed. / Mathias Liewald. Stuttgart : IFU - Institute for Metal Forming Technology, Universität Stuttgart, 2009. p. 159-174.

    Publication: Research › Article in proceedings – Annual report year: 2009

  366. Published

    Examining the influence of injection speed and mould temperature on the tensile strength of polypropylene and ABS. / Aarøe, Esben Raahede; Blaimschein, Karl Stephan; Deker, Lasse; Stentoft-Christensen, Hans Christian; Islam, Mohammad Aminul (Supervisor); Hansen, Hans Nørgaard (Supervisor).

    1st ed. Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2009. 89 p.

    Publication: Research - peer-review › Report – Annual report year: 2009

  367. Published

    Experimental validation of viscous and viscoelastic simulations of micro injection molding process. / Gava, Alberto; Tosello, Guido; Lucchetta, Giovanni; Hansen, Hans Nørgaard; Schoth, Andreas.

    In: Proceedings of 67th Annual Technical Conference (ANTEC2009). 2009. p. 1781-1786.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  368. Published

    Formability in Multistage Single Point Incremental Forming. / Skjødt, Martin; Silva, M.B.; Martins, P.A.F.; Bay, Niels.

    In: Proceed. 7th ESMC2009: The 7th Euromech Solids Mechanics Conference. ed. / Jorge Ambrósio; Miguel T. Silva. Lisbon, 2009. p. 67-68.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  369. Published

    Friction Stir Welding of Aluminium Tailored Blanks Processed by Single Point Incremental Forming. / Silva, M.B.; Skjødt, Martin; Vilaca, P.; Bay, Niels; Martins, P.A.F.

    In: Proceedings of the 3rd International Conference on Integrety - Reliability - Failure, Challenges and Opportunities: IRF 2009. 2009. p. 599-600.

    Publication: Research › Article in proceedings – Annual report year: 2009

  370. Published

    Hybrid laser-arc welding. / Olsen, Flemming Ove (Editor).

    Abington Hall, Cambridge CB21 6AH : British Welding Research Association, 2009. 368 p.

    Publication: Research - peer-review › Book – Annual report year: 2009

  371. Published

    Improvement of geometrical measurements from 3D-SEM reconstructions. / Carli, Lorenzo (Invited author); De Chiffre, Leonardo (Invited author); Horsewell, Andy (Invited author); Carmignato, S. (Invited author); Santin, D. (Invited author).

    In: CIRP CAT Conference 2009. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  372. Published

    Induction assisted hybrid welding of steel T-joints. / Nielsen, Jakob Skov; Olsen, Flemming Ove.

    In: 12th NOLAMP proceeding 2009. 2009.

    Publication: Research › Article in proceedings – Annual report year: 2009

  373. Published

    Influence of different process settings conditions on the accuracy of micro injection molding simulations: an experimental validation. / Tosello, Guido; Gava, Alberto; Hansen, Hans Nørgaard; Reinecke, Holger; Lucchetta, Giovanni; Schoth, Andreas.

    In: Proceedings of 67th Annual Technical Conference (ANTEC2009). 2009. p. 1787-1793.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  374. Published

    Influence of inorganic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheet. / Nwaogu, Ugochukwu Chibuzoh; Blawert, C.; Scharnagl, N.; Dietzel, W.; Kainer, K.U.

    In: Corrosion Science, Vol. 51, No. 11, 2009, p. 2544-2556.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  375. Published

    Influence of measuring parameters on the accuracy of atomic force microscope in industrial applications. / Tosello, Guido; Antico, Andrea; Hansen, Hans Nørgaard; Marinello, Francesco; Lucchetta, Giovanni.

    In: Proceedings of the 5th International Conference on Multi-Material Micro Manufacture (4M/ICOMM 2009). 2009. p. 401-406.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  376. Published

    Influence of rare earths on shrinkage porosity in thin walled ductile cast iron. / Pedersen, Karl Martin; Tiedje, Niels Skat.

    In: International Journal of Cast Metals Research, Vol. 22, No. 1-4, 2009, p. 302-305.

    Publication: Research - peer-review › Conference article – Annual report year: 2009

  377. Published

    Influence of tool roughness and lubrication on contact conditions in skin-pass rolling. / Kijima, Hideo; Bay, Niels.

    In: Journal of Materials Processing Technology, Vol. 209, No. 10, 2009, p. 4835-4841.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  378. Published

    Influence of tribological additives on friction and impact performance of injection moulded polyacetal. / Laursen, Jens Lolle; Sivebæk, Ion Marius; Christoffersen, L.W.; Papsøe, M.; Vigild, Martin Etchells; Brøndsted, Povl; Horsewell, Andy.

    In: Wear, Vol. 267, No. 12, 2009, p. 2294-2302.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  379. Published

    Integration of micro milling highspeed spindle on a microEDM-milling machine set-up. / De Grave, Arnaud; Hansen, Hans Nørgaard; Andolfatto, Loic.

    In: Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009. 2009. p. 355-358.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  380. Published

    Investigation on Capability of the Reaming Process using Minimal Quantity Lubrication. / De Chiffre, Leonardo; Tosello, Guido; Píška, Miroslav; Müller, Pavel.

    In: C I R P - Journal of Manufacturing Science and Technology, Vol. 2, No. 1, 2009, p. 47-54.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  381. Published

    Investigation on hole manufacture in 42CrMo4 steel using 3-flute carbide drills and 6-flute cermet reamers. / Müller, Pavel (Invited author); De Chiffre, Leonardo (Invited author).

    In: SPS09. 2009. p. 438-446.

    Publication: Research › Article in proceedings – Annual report year: 2010

  382. Published

    Lagrangian finite element method for 3D time-dependent non-isothermal flow of K-BKZ fluids. / Román Marín, José Manuel; Rasmussen, Henrik K.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 162, No. 1-3, 2009, p. 45-53.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  383. Published

    Lagrangian Finite-Element Method for the Simulation of K-BKZ Fluids with Third Order Accuracy. / Marin, José Manuel Román; Rasmussen, Henrik K.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 156, No. 3, 2009, p. 177-188.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  384. Published

    LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE. / Zhang, Yang; Nielsen, Jakob Skov; Tang, Peter Torben; Hansen, Hans Nørgaard.

    In: LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  385. Published

    Low-loss and bendable THz fiber with tailored dispersion. / Nielsen, Kristian; Rasmussen, Henrik K.; Adam, Aurèle J. L.; Planken, Paul C.M.; Bang, Ole; Jepsen, Peter Uhd.

    In: Proceedings of the Conference on Lasers and Electro-Optics. IEEE, 2009. p. 1-2.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  386. Published

    Magnetic cooling at Risoe DTU. / Nielsen, Kaspar Kirstein; Bjørk, Rasmus; Jensen, Jesper Buch; Bahl, Christian Robert Haffenden; Pryds, Nini; Smith, Anders; Nordentoft, Anders; Hattel, Jesper Henri.

    In: arXiv.org, e-Print Archive, Condensed Matter, 2009, p. arXiv:0902.0812v1.

    Publication: Research › Journal article – Annual report year: 2009

  387. Published

    Mechanical properties test and microstructure analysis of polyoxymethylene (POM) micro injection moulded standard parts. / Tosello, Guido; Lucchetta, Giovanni; Hansen, Hans Nørgaard; Gava, Alberto; Paliuri, Sara.

    In: Proceedings of the 5th International Conference on Multi-Material Micro Manufacture (4M/ICOMM 2009). 2009. p. 231-235.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  388. Published

    Microfactories - implications on automation of micro manufacturing processes. / Berger, Urlich; De Grave, Arnaud; Hansen, Hans Nørgaard.

    In: Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  389. Published

    MICRO FORMING OF TITANIUM. / Eriksen, Rasmus Solmer; Arentoft, Mogens; Paldan, Nikolas Aulin; Holstein, Jakob Viggo.

    In: MICRO FORMING OF TITANIUM. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  390. Published

    Micro tooling technologies for polymer micro replication: direct, indirect and hybrid process chains. / Tosello, Guido (Invited author); Hansen, Hans Nørgaard (Invited author).

    In: New Production Technologies for The 21st Century. Brno (Czech Republic), 2009. p. 7-20.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  391. Published

    Mikrostruktur og hårdhedsfordeling ved modstandssvejsning af højstyrkestål. / Pedersen, Kim Richard; Harthøj, Anders; Friis, Kasper Leth; Bay, Niels; Somers, Marcel A. J.; Zhang, Wenqi.

    In: Svejsning, Vol. 36, No. 1, 2009, p. 6-9.

    Publication: Communication › Journal article – Annual report year: 2009

  392. Published

    Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting. / Domkin, Konstantin; Hattel, Jesper Henri; Thorborg, Jesper.

    In: Journal of Materials Processing Technology, Vol. 209, No. 8, 2009, p. 4051-4061.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  393. Published

    Modeling of Sentmanat Extensional Rheometer. / Román Marín, José Manuel; Román Marín, José Manuel; Rasmussen, Henrik K.; Hassager, Ole.

    In: 5th Annual European Rheology Conference. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  394. Published

    Modelling Cr depletion under a growing Cr2O3 layer on austenitic stainless steel: the influence of grain boundary diffusion. / Hansson, Anette Nørgaard; Hattel, Jesper Henri; Dahl, Kristian Vinter; Somers, Marcel A. J.

    In: Modelling & Simulation in Materials Science and Engineering, Vol. 17, No. 3, 2009, p. 035009.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  395. Published

    Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings. / Kotas, Petr; Hattel, Jesper Henri; Thorborg, Jesper; Svensson, Ingvar L; Seifeddine, Salem.

    In: Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  396. Published

    Multibeam fiber laser cutting. / Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov.

    In: Journal of Laser Applications, Vol. 21, No. 3, 2009, p. 133-138.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  397. Published

    Multi-scale optical metrology for the quality control of polymer microfluidic systems. / Tosello, Guido; Marinello, Francesco; Hansen, Hans Nørgaard.

    In: Proceedings of 9th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen). Vol. I 2009. p. 235-238.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  398. Published

    Numerical Modeling of Multi-Material Active Magnetic Regeneration. / Nielsen, Kaspar Kirstein; Engelbrecht, Kurt; Bahl, Christian Robert Haffenden; Smith, Anders; Pryds, Nini; Hattel, Jesper Henri.

    In: ExHFT-7: 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics. 1. ed. AGH University of Science and Technology Press, 2009. p. 515-522.

    Publication: Research › Article in proceedings – Annual report year: 2009

  399. Published

    Observing the chain stretch transition in a highly entangled polyisoprene melt using transient extensional rheometry. / Nielsen, Jens Kromann; Hassager, Ole; Rasmussen, Henrik K.; McKinley, Gareth H.

    In: Journal of Rheology, Vol. 53, No. 6, 2009, p. 1327-1346.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  400. Published

    ON MODELLING OF MICROSTRUCTURE FORMATION, LOCAL MECHANICAL PROPERTIES AND STRESS – STRAIN DEVELOPMENT IN ALUMINIUM CASTINGS. / EFSA Publication ; Kotas, Petr.

    In: MODELING OF CASTING, WELDING, AND ADVANCED SOLIDIFICATION PROCESSES. TMS, 2009. p. 129-136.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  401. Published

    Optimization of friction stir welding using space mapping and manifold mapping-an initial study of thermal aspects. / Larsen, Anders Astrup; Bendsøe, Martin P.; Hattel, Jesper Henri; Schmidt, Henrik Nikolaj Blicher.

    In: Structural and Multidisciplinary Optimization, Vol. 38, No. 3, 2009, p. 289-299.

    Publication: Research - peer-review › Conference article – Annual report year: 2009

  402. Published

    Physical masking process for integrating micro metallic structures on polymer substrate : Physical mask. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard.

    In: 9th International Conference of European Society of Precision Engineering and Nanotechnology: EUSPEN. Vol. 2nd 1st. ed. Austria : Euspen-Copy & Druck, 2009. p. 22-25.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  403. Published

    Process chains for the manufacturing of moulded interconnect devices. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben; Sun, Jie.

    In: International Journal of Advanced Manufacturing Technology, Vol. 42, No. 9-10, 2009, p. 831-841.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  404. Published

    Quality control of injection moulded micro mechanical parts. / Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard; Jørgensen, Martin Bondo.

    In: Proceedings of the 5th International Conference on Multi-Material Micro Manufacture (4M/ICOMM 2009). 2009. p. 175-178.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  405. Published

    Replica calibration artefacts for optical 3D scanning of micro parts. / De Chiffre, Leonardo (Invited author); Carmignato, S. (Invited author); Cantatore, Angela (Invited author); Jensen, J.D. (Invited author).

    In: Proceedings of the euspen International Conference. 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

  406. Published

    Report on best practice for micro/nano replication process data acquisition systems : COTECH process characterization. / Islam, Mohammad Aminul.

    1st ed. COTECH administrator, 2009. 48 p. (COTECH Deliverables; No. COTECH D 4.2.1).

    Publication: Research - peer-review › Report – Annual report year: 2009

  407. Published

    Report on COTECH test procedure and characterization techniques : COTECH Deliverable. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard (Supervisor).

    COTECH administrator, 2009. 42 p.

    Publication: Research - peer-review › Report – Annual report year: 2009

  408. Published

    Report on the benchmark of products & processes and ranking of cruciality and criticity : Benchmarking products and processes. / Islam, Aminul.

    1st ed. Austria : COTECH officials, 2009. 71 p. (COTECH deliverables; No. COTECH D1.4.1).

    Publication: Research - peer-review › Report – Annual report year: 2009

  409. Published

    Revisiting single-point incremental forming and formability/failure diagrams by means of finite elements and experimentation. / Silva, M. B.; Skjødt, Martin; Bay, Niels; Martins, P. A. F.

    In: Journal of Strain Analysis for Engineering Design, Vol. 44, No. 4, 2009, p. 221-234.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  410. Published

    Simulation of Elastic Rupture in Extension of Entangled Monodisperse Polymer Melts. / Lyhne, Anders; Rasmussen, Henrik K.; Hassager, Ole.

    In: Physical Review Letters, Vol. 102, No. 13, 2009, p. 138301.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  411. Published

    Simulative Wear Testing of Tool Materials for Comminution of Hard Ore Material. / Olsson, David Dam; Bay, Niels.

    In: Proceedings of DGM (deutsche Gesellschaft für Materialkunde) International Conference on Friction, Wear and Wear Protection. Weinheim : Wiley-VCH, 2009. p. 439-445.

    Publication: Research › Article in proceedings – Annual report year: 2009

  412. Published

    Single Point Incremental Forming of Metal Sheets. / Silva, M.B.; Skjødt, Martin; Martins, Paulo A.F.; Bay, Niels.

    In: Metallurgiske Processer i Danmark: Proceed. Dansk Metallurgisk Selskabs Vintermøde. DMS, 2009. p. 52-66.

    Publication: Research › Article in proceedings – Annual report year: 2009

  413. Published

    Single point incremental forming of tailored blanks produced by friction stir welding. / Silva, M.B.; Skjødt, Martin; Vilaca, P.; Bay, Niels; Martins, P.A.F.

    In: Journal of Materials Processing Technology, Vol. 209, No. 2, 2009, p. 811-820.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  414. Published

    Size effects in manufacturing of metallic components. / Vollertsen, F; Biermann, D; Hansen, Hans Nørgaard; Jawahir, I.S.; Kuzman, K.

    In: C I R P Annals, Vol. 58, No. 2, 2009, p. 566-587.

    Publication: Research - peer-review › Conference article – Annual report year: 2009

  415. Published

    Solidification paths in modified Inconel 625 weld overlay material. / Chandrasekaran, Karthik; Tiedje, Niels Skat; Hald, John.

    In: International Journal of Cast Metals Research, Vol. 22, No. 1-4, 2009, p. 306-310.

    Publication: Research - peer-review › Conference article – Annual report year: 2009

  416. Published

    Sub-µm structured lotus surfaces manufacturing. / Worgull, Matthias; Heckele, Mathias; Mappes, Timo; Matthis, B.; Tosello, Guido; Metz, Tobias; Gavillet, Jerome; Koltay, Peter; Hansen, Hans Nørgaard.

    In: Microsystem Technologies, Vol. 15, No. 8, 2009, p. 1327-1333.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  417. Published

    The effect of demagnetization on the magnetocaloric properties of gadolinium. / Bahl, Christian Robert Haffenden; Nielsen, Kaspar Kirstein.

    In: Journal of Applied Physics, Vol. 105, No. 1, 2009, p. 013916.

    Publication: Research - peer-review › Journal article – Annual report year: 2009

  418. Published

    Thermomechanical Modelling of Friction Stir Welding. / Hattel, Jesper Henri (Invited author); Schmidt, Henrik Nikolaj Blicher (Invited author); Tutum, Cem Celal (Invited author).

    In: Thermomechanical Modelling of Friction Stir Welding. ed. / Stan A. David; Tarasankar DebRoy; John N. DuPont; Toshihiko Koseki; Herschel B. Smartt. Georgia USA : ASM International, 2009. p. 1-10.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  419. Published

    Tooling Process Chains and Concepts. / Hansen, Hans Nørgaard; Arentoft, Mogens; Tang, Peter Torben; Bissacco, Giuliano.

    In: Micro-Manufacturing Engineering and Technology. London : WilliamAndrew Publishing, 2009. p. 287-297.

    Publication: Education - peer-review › Book chapter – Annual report year: 2009

  420. Published

    Tribo-systems for Sheet Metal Forming. / Bay, Niels.

    In: Metallurgiske Processer i Danmark: Proceed. Dansk Metallurgisk Selskabs Vintermøde. 2009. p. 160-175.

    Publication: Research › Article in proceedings – Annual report year: 2009

  421. Published

    Two component injection moulding: Present and future perspectives. / Islam, Aminul; Hansen, Hans Nørgaard.

    01 January 2009. Available from http://www.4spepro.org/view.php?source=000049-2009-06-18.

    Publication: Research - peer-review › Internet publication – Annual report year: 2009

  422. Published

    Two component micro injection molding for MID fabrication. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben.

    In: ANTEC 2009 Annual Technical Conference, Chicago, Illinois USA: ANTEC@NPE 2009. Chicago, Illinois USA, 2009.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2009

  423. Published

    Umweltfreundliche Tribosysteme in der Massivumformung. / Bay, Niels (Invited author); Nakamura, Tamotsu (Invited author); Ishibashi, I. (Invited author); Yoshida, M. (Invited author); Morishita, M. (Invited author).

    In: Neuere Entwicklungen in der Massivumformung. Stuttgart : IFU - Institut für Umformtechnik, Universität Stuttgart, 2009. p. 179-196.

    Publication: Research › Article in proceedings – Annual report year: 2009

  424. Published

    Velocity dependence of friction of confined polymers. / Sivebæk, Ion Marius; Samoilov, V.N.; Persson, B.N.J.

    In: arXiv:0911.3637, 2009, p. arXiv:0911.3637v1.

    Publication: Research - peer-review › Journal article – Annual report year: 2010

  425. 2008
  426. Published

    Rapid Prototyping by Single Point Incremental Forming of Sheet Metal. / Skjødt, Martin; Bay, Niels (Supervisor); Lenau, Torben Anker (Supervisor).

    2008. 184 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2008

  427. Published

    Precision moulding of polymer micro components : Optimization, Simulation, Tooling, Quality Control and Multi-Material Application. / Tosello, Guido; Hansen, Hans Nørgaard (Supervisor); Tang, Peter Torben (Supervisor); Kjær, Erik Michael (Supervisor).

    2008. 242 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2008

  428. Published

    Two component micro injection moulding for moulded interconnect devices. / Islam, Aminul; Hansen, Hans Nørgaard (Supervisor); Kjær, Erik Michael (Supervisor); Tang, Peter Torben (Supervisor).

    2008. 266 p.

    Publication: Research › Ph.d. thesis – Annual report year: 2008

  429. Published

    Reduced Energy Consumption for Melting in Foundries. / Skov-Hansen, Søren Peter; Tiedje, Niels Skat (Supervisor).

    Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2008.

    Publication: Research › Ph.d. thesis – Annual report year: 2008

  430. Published

    4M Progress Report 2006-2008. / Dimov, S.; Matthews, C.W.; Brousseau, E.; Bigot, S.; De Grave, Arnaud; Hansen, Hans Nørgaard; Bissacco, Giuliano; Tosello, Guido; Fillon, B.; Bolt, P.; Engel, U.; Johander, P.; Jung, E.; Kirby, P.B.; Mattsson, L.; Richter, M.; Ritzhaupt-Kleissl, H.-J.; Schoth, A.; Wenzel, C.; Matovic, J.

    In: Proceedings of the 4th Internation Conference in Multi-Material Micro Manufacturing. Whittles Publishing, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  431. Published

    A Compliant Bistable Mechanism Design Incorporating Elastica Buckling Beam Theory and Pseudo-Rigid-Body Model. / Sönmez, Ümit; Tutum, Cem Celal.

    In: Journal of Mechanical Design, Vol. 130, No. 4, 2008, p. 042304.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  432. Published

    A constitutive analysis of transient and steady-state elongational viscosities of bidisperse polystyrene blends. / Wagner, Manfred H.; Rolon-Garrido, Victor H.; Nielsen, Jens Kromann; Rasmussen, Henrik K.; Hassager, Ole.

    In: Journal of Rheology, Vol. 52, No. 1, 2008, p. 67-86.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  433. Published

    Alignment procedure for pallet and robot coordinate system in micro assembly operations. / Gegeckaite, Asta; Hansen, Hans Nørgaard.

    In: Proceedings of the 10. International conference of the European Society for Precision Engineering and Nanotechnology. Vol. 2 Austria : euspen, 2008. p. 371-374.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  434. Published

    A MICROPOROUS COATING OR STRUCTURE AND A PROCESS FOR PRODUCING IT. / Tang, Peter Torben (Inventor); Arentoft, Mogens (Inventor); Bay, Niels (Inventor); Borrild, Morten Jerne (Inventor); Mizushima, Io (Inventor).

    Patent No.: WO2008154926. Dec 24, 2008.

    Publication: Research › Patent – Annual report year: 2008

  435. Published

    An Experimental Investigation of Diffusion within Electroplated Lead-free Solder Alloy Stacks Combining Elements such as Sn, Cu, Au and/or Zn onto a Ni UBM. / Bergmann, René; Mizushima, Io; Tang, Peter Torben; Hansen, Hans Nørgaard.

    In: Proceeding of IMAPS NORDIC Conference 2008. International Microelectronics And Packaging Society, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  436. Published

    Assessment of Benchmark Cases for Modeling of Residual Stresses and Distortions in Friction Stir Welding. / Tutum, Cem Celal; Schmidt, Henrik Nikolaj Blicher; Hattel, Jesper Henri.

    In: Proceedings of 7th International Symposium on Friction Stir Welding. UK : TWI Ltd, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  437. Published

    Calibration artefact for the microscale with high aspect ratio: The fiber gauge. / Marinello, Francesco; Savio, Enrico; Carmignato, Simone; De Chiffre, Leonardo.

    In: CIRP Annals - Manufacturing Technology, Vol. 57, No. 1, 2008, p. 497-500.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  438. Published

    Characterization of Electrical Properties of Resistance Welding Machines. / Wu, Pei; Shao, Y.; Zhang, Wenqi; Bay, Niels.

    In: China Welding, Vol. 17, No. 3, 2008, p. 24-29.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  439. Published

    Characterization of nano-scale finished surfaces. / Hansen, Hans Nørgaard (Invited author); De Chiffre, Leonardo (Invited author).

    2008. Abstract from Tooling Working Group Seminar of the International Cold Forging Group, Sønderborg, Denmark, .

    Publication: Research › Conference abstract for conference – Annual report year: 2008

  440. Published

    Cortical neuroplasticity in patients recovering from acute optic neuritis. / Korsholm, Kirsten; Madsen, Kristoffer Hougaard; Frederiksen, Jette L.; Rowe, James B.; Lund, Torben.

    In: NeuroImage, Vol. 42, No. 2, 2008, p. 836-844.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  441. Published

    Deposited Micro Porous Layer as Lubricant Carrier in Metal Forming. / Arentoft, Mogens; Bay, Niels; Tang, Peter Torben; Jensen, Jørgen Dai; Paldan, Nikolas Aulin; Mizushima, Io; Eriksen, Rasmus Solmer.

    In: Advanced Technology of Plasticity: Proceed. 9th International Conference on Technology of Plasticity. Korea : Korean Society for Technology of Plasticity, 2008. p. 139-140.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  442. Published

    Design of the Resistance Welding Tool using Optimization Techniques. / Bogomolny, Michael; Bendsøe, Martin P.; Hattel, Jesper Henri.

    In: Abstracts of 8th World Congress on Computational Mechanics. ed. / B. A. Schrefler; U. Perego. Barcelona : International Center for Numerical Methods in Engineering (CIMNE), 2008.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2008

  443. Published

    DEVELOPMENT OF AN INNOVATIVE LASER SCANNER FOR GEOMETRICAL VERIFICATION OF METALLIC AND PLASTIC PARTS. / Carmignato, Simone; De Chiffre, Leonardo; Fisker, Rune; Hollenbeck, Karl; Savio, Enrico.

    In: IMEKO TC 2 Symposium on Photonics in Measurements 2008. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  444. Published

    Development of high melting point, environmentally friendly solders, using the calphad approach. / Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri.

    In: Archives of Metallurgy and Materials, Vol. 53, No. 4, 2008, p. 1111-1118.

    Publication: Research - peer-review › Conference article – Annual report year: 2008

  445. Published

    Direct dynamic calibration of dynamometers for micro milling operations. / Bissacco, Giuliano; Bau, Alessandro; Hansen, Hans Nørgaard.

    In: Proceedings of the 10. International conference of the European Society for Precision Engineering and Nanotechnology. Vol. 1 Austria : euspen, 2008. p. 500-503.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  446. Published

    Effectiveness and resolution of tests for evaluating the performance of cutting fluids in machining aerospace alloys. / De Chiffre, Leonardo; Axinte, Dragos A.

    In: CIRP Annals - Manufacturing Technology, Vol. 57, 2008, p. 129-132.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  447. Published

    Elongational Dynamics of Narrow Molar Mass Distribution Linear and Branched Polystyrene Melts. / Rasmussen, Henrik K.; Skov, Anne Ladegaard; Nielsen, Jens Kromann; Laille, Philippe; Hassager, Ole.

    In: Proceedings of The 15 International Congress on Rheology. Springer, 2008. p. 415-417 (AIP Conference Proceedings. Materials Physics and Applications; No. 1027).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  448. Published

    Establishment of traceability in measurement of micro components. / Hansen, Hans Nørgaard (Invited author).

    2008. Abstract from Newest equipment for measurement, quality assurance and product developmetn in the manufacturing industry, DTU, Denmark, .

    Publication: Research › Conference abstract for conference – Annual report year: 2008

  449. Published

    Experimental analysis of flow of ductile cast iron in stream lined gating systems. / Skov-Hansen, Søren; Green, Nick; Tiedje, Niels Skat.

    In: Giessereiforschung, Vol. 60, No. 4, 2008, p. number 03.

    Publication: Research - peer-review › Conference article – Annual report year: 2008

  450. Published

    Experimental analysis of flow of ductile cast iron in stream lined gating systems. / Skov-Hansen, Søren Peter; Tiedje, Niels Skat.

    In: World Foundry Congress. 2008. p. 173-176.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  451. Published

    Fiberlaserens udvikling : - oversigt, anvendelser, markedet. / Olsen, Flemming Ove (Author).

    2008. Laserprocesser og industriel udvikling lige nu : Laser ERFA-gruppe møde (ATV-SEMAPP), Odense, Danmark, 01-01-08.

    Publication: Education › Sound/Visual production (digital) – Annual report year: 2008

  452. Published

    Force analysis in micro milling Al 6082 T6 in various engagement conditions. / Bissacco, Giuliano; Gietzelt, T.; Hansen, Hans Nørgaard.

    In: Proceedings of the 4th International Conference on Multi Material Micro Manufacture (4M). 2008. p. 241-244.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  453. Published

    Forming of High-strength Steels Using a Hot-melt Dry Lubricant. / Hörnström, Sven-Erik; Karlsson, Erik; Olsson, Mikael; Bay, Niels; Losch, Achim.

    In: Best in Class Stamping: Proceed. IDDRG 2008 Conf. 16.-18. June, 2008. ed. / Nader Asnafi. The Swedish Deep Drawing Research Group, 2008. p. 741-752.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  454. Published

    Frictional properties of confined polymers. / Sivebæk, Ion Marius; Samoilov, Vladimir N; Persson, Bo N J.

    In: European Physical Journal E. Soft Matter, Vol. 27, No. 1, 2008, p. 37-46.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  455. Published

    Friction of polymers: New experimental and theoretical advances. / Sivebæk, Ion Marius; Samoilov, Vladimir N; Persson, Bo N J.

    2008. Abstract from 2008 MRS Spring Meeting March 2008, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2008

  456. Published

    Graphite nodule count and size distribution in thin-walled ductile cast iron. / Pedersen, Karl Martin; Tiedje, Niels Skat.

    In: Materials Characterization, Vol. 59, No. 8, 2008, p. 1111-1121.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  457. Published

    High aspect ratio micro tool manufacturing for polymer replication using mu EDM of silicon, selective etching and electroforming. / Tosello, Guido; Bissacco, Giuliano; Tang, Peter Torben; Hansen, Hans Nørgaard; Nielsen, P.C.

    In: Microsystem Technologies : Micro- and Nanosystems Information Storage and Processing Systems, Vol. 14, No. 9-11, 2008, p. 1757-1764.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  458. Published

    Hot embossing of high aspect ratio sub-μm structured surfaces for micro fluidic applications. / Heckele, Mathias; Worgull, Matthias; Mappes, Timo; Tosello, Guido; Metz, Tobias; Gavillet, Jerome; Koltay, Peter; Hansen, Hans Nørgaard.

    In: 4. International Conference on Multi-Material Micro Manufacture: (4M2008). Whittles Publishing, 2008. p. 209-212.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  459. Published

    How reliable are surface roughness measurements of micro-features? : Experiences of a Round Robin test within nine 4M laboratories. / Mattsson, Lars; Bolt, Pieter; Azcarate, Sabino; Brousseaud, Emmanuel; Fillon, Bertrand; Fowler, Ron; Gelink, Erik; Griffiths, Christian; Khan Malek, Chantal; Marson, Silvia; Retolaza, Aritz; Schneider, Andreas; Schoth, Andreas; Temun, Attila; Tosello, Guido.

    In: 4. International Conference on Multi-Material Micro Manufacture: (4M2008). Riga (Latvia) : Whittles Publishing, 2008. p. 139-142.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  460. Published

    Implementation strategies for the optimization of micro injection moulding simulations. / Tosello, Guido; Schoth, Andreas; Hansen, Hans Nørgaard.

    In: 4. International Conference on Multi-Material Micro Manufacture: (4M2008). Whittles Publishing, 2008. p. 271-274.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  461. Published

    In-cavity pressure and injection time measurements during the micro injection moulding process. / Tosello, Guido; Schoth, Andreas; Hansen, Hans Nørgaard.

    In: International Conference of the European Society for Precision Engineering and Nanotechnology. Vol. 2 Austria : Copy & Druck, 2008. p. 476-480.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  462. Published

    Influence of microstructure of 6063 aluminium alloy on the appearance of anodized layer. / Tabrizian-Ghalehno, Naja; Møller, Per; Ambat, Rajan; Hansen, Hans Nørgaard.

    In: European Corrosion Congress 2008: Proceedings. DECHEMA, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  463. Published

    Influence of rare earths on shrinkage porosities in thin walled ductile cast iron. / Pedersen, Karl Martin; Tiedje, Niels Skat.

    In: 2. International conference on advances in solidification processes. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  464. Published

    Influence of tool roughness and lubrication on contact conditions in skin-pass rolling. / Kijima, Hideo; Bay, Niels.

    In: Proceedings of the 155th ISIJ Meeting: Current Advances in Materials and Processes (CAMP-ISIJ): The Iron and Steel Institute of Japan. Vol. 21 2008.

    Publication: Research › Conference abstract in proceedings – Annual report year: 2008

  465. Published

    Influence of Tribological Additives on Friction and Impact Performance of Injection Moulded Polyacetal. / Laursen, Jens L; Sivebæk, Ion Marius; christoffersen, Lasse W; Brøndsted, Povl; Papsøe, Mogens; Vigild, Martin Etchells; Horsewell, Andy.

    In: Proceedings of the 13th Nordic Symposium on Tribology. Finland : Tampere University Press, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  466. Published

    Integrated modelling in materials and process technology. / Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 24, No. 2, 2008, p. 137-148.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  467. Published

    Integration of LCA in design of micro/nano products and production pathways. / Olsen, Stig I.; De Grave, Arnaud.

    2008. Abstract from SETAC Europe 18. Annual Meeting, Warzawa, Poland, .

    Publication: Research - peer-review › Conference abstract for conference – Annual report year: 2008

  468. Published

    Integration of LCA in Micro/Nano products and production pathways. / Olsen, Stig Irving; De Grave, Arnaud.

    2008. Poster session presented at SETAC Europe 18th Annual Meeting, Warsaw, Poland.

    Publication: Research › Poster – Annual report year: 2008

  469. Published

    Introduction of a new pair of thermoplastic materials for precision manufacturing of moulded interconnect devices.. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben.

    In: Proceedings of the European Society for Precision Engineering and Nanotechnology: EUSPEN 08. Vol. 2 1. ed. Austria : Copy & Druck, 2008. p. 555-559.

    Publication: Research › Article in proceedings – Annual report year: 2008

  470. Published

    Investigation on Capability of Reaming Process using Minimal Quantity Lubrication. / De Chiffre, Leonardo (Invited author); Tosello, Guido (Invited author); Piska, Miroslav (Invited author); Müller, Pavel (Invited author).

    In: Proceedings of The Swedish Production Symposium: SPS08. ed. / B. Lindberg; J. Stahreand. Royal Institute of Technology (KTH) (Stockholm, Sweden), 2008. p. 85-92.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  471. Published

    Large amplitude oscillatory elongation flow. / Rasmussen, Henrik K.; Laillé, Philippe; Yu, Kaijia.

    In: Rheologica Acta, Vol. 47, No. 1, 2008, p. 97-103.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  472. Published

    Laser induced selective activation utilizing auto-catalytic electroless plating on polymer surfaces. / Zhang, Yang; Tang, Peter Torben; Nielsen, Jakob Skov; Hansen, Hans Nørgaard.

    In: Proc. 8th International Congress on Molded Interconnect Devices. 2008.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2008

  473. Published

    Lubricant Test Methods for Sheet Metal Forming. / Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson.

    In: Tribology International, Vol. 41, No. 9-10, 2008, p. 844-853.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  474. Published

    Magnetic Cooling at Risø DTU. / Nielsen, Kaspar Kirstein; Bjørk, Rasmus; Jensen, Jesper Buch; Bahl, Christian Robert Haffenden; Pryds, Nini; Smith, Anders; Nordentoft, Anders; Hattel, Jesper Henri.

    In: 8th IIF/IIR Gustav Lorentzen Conference on Natural Working Fluids. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  475. Published

    Manufacturing routes for disposable polymer blood diagnostic microfluidic systems. / Tosello, Guido; Griffiths, Christian; Azcarate, Sabino; Schoth, Andreas; Fillon, Bertrand.

    In: Proceedings of the 1. European Conference on Medical Polymers. Queen's University Belfast, 2008. p. 197-204.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  476. Published

    Measurement of Reversed Extension Flow using the Filament Stretch Rheometer. / Rasmussen, Henrik K.; Skov, Anne Ladegaard; Nielsen, Jens Kromann; Laille, Philippe.

    In: Proceedings of The 15 International Congress on Rheology. American Institute of Physics, 2008. p. 1108-1110 (AIP Conference Proceedings; No. 1027).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  477. Published

    Measurement strategies and Software for Nano-CMM : Multisensor and Multiview Experimental Measurements on Micro Components. / Carli, Lorenzo; Voltan, Alessandro; Tosello, Guido; De Chiffre, Leonardo.

    DTU Man, 2008. 30 p.

    Publication: Research - peer-review › Report – Annual report year: 2008

  478. Published

    METHOD AND SYSTEM FOR LASER WELDING. / Olsen, Flemming Ove (Inventor).

    Patent No.: WO2008052551. May 08, 2008.

    Publication: Research › Patent – Annual report year: 2008

  479. Published

    METROLOGICAL PERFORMANCE OF SEM 3D TECHNIQUES. / Marinello, Francesco; Carmignato, Simone; Savio, Enrico; Bariani, Paolo; Carli, Lorenzo; Horsewell, Andy; De Chiffre, Leonardo.

    In: IMEKO TC 2 Symposium on Photonics in Measurements 2008. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  480. Published

    Micro Engineering: Experiments conducted on the use of polymeric materials in micro injection moulding. / Griffiths, Christian; Tosello, Guido; Nestler, Joerg; Sha, Bian; Hoyle, Robert.

    In: Proceedings of the 1. European Conference on Medical Polymers. Queen's University Belfast, 2008. p. 171-178.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  481. Published

    Microfactories for micro bulk metal forming. / Hansen, Hans Nørgaard; Arentoft, Mogens; Paldan, Nikolas Aulin.

    In: Proceedings of the 6. International Workshop on Microfactories. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  482. Published

    Micro Factory - design and realisation. / Hansen, Hans Nørgaard (Invited author).

    2008. Abstract from Temadag om mikrofabrikker, super lasere og nano coatings : 25. marts 2008, Teknologisk Institut, Tåstrup, .

    Publication: Research › Conference abstract for conference – Annual report year: 2008

  483. Published

    Micro-MID Manufacturing By Two-Shot Injection Moulding. / Islam, Mohammad Aminul; Hansen, Hans Nørgaard; Tang, Peter Torben.

    In: OnBoard Technology, Vol. 9, No. 2, 2008, p. 10-13.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  484. Published

    Microstructure and Hardness Distribution of Resistance Welded Advanced High Strength Steels : . In: W. Zhang (Edtr.):. / Pedersen, Kim Richardt (Invited author); Harthøj, Anders (Invited author); Friis, Kasper Leth (Invited author); Bay, Niels (Invited author); Somers, Marcel A. J. (Invited author); Zhang, Wenqi (Invited author).

    In: Proceed. 5th International Seminar on Advances in Resistance Welding. 2008. p. 134-146.

    Publication: Research › Article in proceedings – Annual report year: 2008

  485. Published

    Modelling the cutting edge radius size effect for force prediction in micro milling. / Bissacco, Giuliano; Hansen, Hans Nørgaard; Jan, Slunsky.

    In: Annals of CIRP, Vol. 57, No. 1, 2008, p. 113-116.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  486. Published

    Mode profiling of optical fibers at high laser powers. / Nielsen, Peter Carøe; Pedersen, David Bue; Simonsen, R.B.; Erschens, D.N.; Lilbæk, M.F.; Eskildsen, Lars; Rottwitt, Karsten; Hansen, Hans Nørgaard.

    In: Proceedings of SPIE - The International Society for Optical Engineering. Vol. 6873 SPIE - International Society for Optical Engineering, 2008. p. 687318 (Proceedings of SPIE; No. 6873).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  487. Published

    Moulded interconnect device fabrication by two shot molding and lasert induced selective activation. / Sun, Jie; Islam, Mohammad Aminul (Supervisor); Hansen, Hans Nørgaard.

    1st ed. Kgs. Lyngby, Denmark : Technical University of Denmark (DTU), 2008. 89 p.

    Publication: Research - peer-review › Report – Annual report year: 2008

  488. Published

    Multibeam Fibre Laser Cutting. / Olsen, Flemming Ove.

    2008. Poster session presented at 27th International Congress on Application of Lasers and Electro-Optics, Pechanga, CA, United States.

    Publication: Research - peer-review › Poster – Annual report year: 2008

  489. Published

    Multidisciplinary graduate course and PhD summerschool in micromechanical system design and manufacture. / Hansen, Hans Nørgaard; De Grave, Arnaud; Bissacco, Giuliano.

    In: proceedings of the EUSPEN. European Society for Precision Engineering and Nanotechnology, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  490. Published

    Multi Stage Strategies for Single Point Incremental Forming of a Cup. / Skjødt, Martin; Bay, Niels; Endelt, Benny; Ingarao, G.

    In: Procced. ESAFORM 2008, Lyon, France, April 23-25, 2008. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  491. Published

    New manufacturing routes for micro polymer manufacturing for the next decades – Process chains to strengthen EC economic power : European Network of Excellence “Multi Material Micro Manufacture: Technology and Applications” (4M). / Bolt, Pieter; Azcarate, Sabino; Khan Malek, Chantal; Schneider, Andreas; Tosello, Guido; Eberhardt, Wolfgang; Mayer, Volker.

    4M Polymer division, 2008. 96 p.

    Publication: Research - peer-review › Report – Annual report year: 2008

  492. Published

    Numerical Modeling of Micro Fluidics of Polymer Melts. / Marin, José Manuel Román; Rasmussen, Henrik K.

    In: :Proceedings of The 15. International Congress on Rheology, 2008. Vol. 1 2008. p. 249-251.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  493. Published

    On the burst of branched polymer melts during inflation. / Rasmussen, Henrik K.; Yu, Kaijia.

    In: Rheologica Acta, Vol. 47, No. 2, 2008, p. 149-157.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  494. Published

    On the origin of Amonton’s friction law. / Persson, Bo N J; Sivebæk, Ion Marius; Samoilov, Vladimir N; Zhao, K. e.; Volokitin, Alexander I; Zhang, Zhenyu.

    In: Journal of Physics: Condensed Matter, Vol. 20, No. 39, 2008, p. 395006-395017.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  495. Published

    On the use of industrial robots in microfactories. / Erikson, Torbjörn; Hansen, Hans Nørgaard; Gegeckaite, Asta.

    In: International Journal of Advanced Manufacturing Technology, Vol. 38, 2008, p. 479-486.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  496. Published

    Optimering af hudklæbere. / Jensen, Mette Krog; Skov, Anne Ladegaard; Bach, Anders; Hassager, Ole; Rasmussen, Henrik K.

    In: Dansk Kemi, Vol. 10, 2008, p. 14-17.

    Publication: Communication › Journal article – Annual report year: 2008

  497. Published

    Optimization of die filling in high pressure die cast part using MAGMAsoft®. / Kotas, Petr; Hattel, Jesper Henri.

    In: Slevarenstvi, No. 7-8, 2008, p. 366-368.

    Publication: Research - peer-review › Journal article – Annual report year: 2008

  498. Published

    Optimization of the Process Parameters for Controlling Residual Stress and Distortion in Friction Stir Welding. / Tutum, Cem Celal; Schmidt, Henrik Nikolaj Blicher; Hattel, Jesper Henri.

    In: Optimization of the Process Parameters for Controlling Residual Stress and Distortion in Friction Stir Welding. Italy, Venice : TCN CAE 2008, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  499. Published

    Piezo driven prestressing of die-system for microforming of metal components. / Paldan, Nikolas Aulin; Arentoft, Mogens; Eriksen, Rasmus Solmer; Mangeot, Charles.

    In: Piezo driven prestressing of die-system for microforming of metal components. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  500. Published

    PREPARATION OF A POLYMER ARTICLE FOR SELECTIVE METALLIZATION. / Hansen, Hans Nørgaard (Inventor); Tang, Peter Torben (Inventor); Nielsen, Jakob Skov (Inventor); Nielsen, Peter Carøe (Inventor).

    Patent No.: WO2008119359. Oct 09, 2008.

    Publication: Research › Patent – Annual report year: 2008

  501. Published

    Process and part filling control in micro injection molding. / Tosello, Guido; Hansen, Hans Nørgaard; Schoth, Andreas.

    In: Society of Plastics Engineers (SPE): Annual Technical Conference (ANTEC). Vol. 4 Society of Plastics Engineers Incorporated (SPE), 2008. p. 2529-2533.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  502. Published

    Processing dependance of friction for polyacetal, neat and with tribological. / Laursen, Jens L. (Invited author); Sivebæk, Ion Marius (Invited author); Christoffersen, Lasse W. (Invited author); Papsøe, Mogens (Invited author); Vigild, Martin Etchells (Invited author).

    In: 66th Annual Technical Conference of the Society of Plastics Engineers. Vol. 3 2008. p. 1698-1702 (Technical Papers, Regional Technical Conference - Society of Plastics Engineers).

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  503. Published

    Processing Dependence Of Friction For Polyacetal, Neat And With Tribological Additives. / Laursen, Jens L; Sivebæk, Ion Marius; Christoffersen, Lasse W; Brøndsted, Povl; Papsøe, Mogens; Vigild, Martin Etchells; Horsewell, Andy.

    In: Proceedings of Antec 2008. Milwaukee, Wi, USA : Curran Associates, 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  504. Published

    Quality control of micro objects. / Hansen, Hans Nørgaard (Invited author).

    2008. Abstract from Temadag om mikrofabrikker, super lasere og nano coatings : 25. marts 2008, Teknologisk Institut, Tåstrup, .

    Publication: Research › Conference abstract for conference – Annual report year: 2008

  505. Published

    Reduced energy consumption by using streamlined gating systems. / Skov-Hansen, Søren; Tiedje, Niels Skat.

    In: The 8th China Foundry Association Congress. 2008.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

  506. Published

    Resource savings by optimising process conditions in foundries. / Tiedje, Niels Skat; Drivsholm, Christian; Skov-Hansen, Søren Peter; Crepaz, Rudolf.

    In: World Foundry Congress. 2008. p. 251-254.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2008

Previous 1 2 Next
Anker Engelunds Vej 1Building 101A2800 Kgs. LyngbyTel +45 45 25 25 25VAT 30 06 09 46EAN