Manufacturing Engineering

  1. 2014
  2. Published

    Analysis of Cavity Pressure and Warpage of Polyoxymethylene Thin Walled Injection Molded Parts: Experiments and Simulations. / Guerrier, Patrick; Tosello, Guido; Hattel, Jesper Henri.

    Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). Polymer Processing Society, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  3. E-pub ahead of print
  4. Published

    A plateau–valley separation method for textured surfaces with a deterministic pattern. / Godi, Alessandro; Kühle, Anders; De Chiffre, Leonardo.

    In: Precision Engineering, Vol. 38, No. 1, 2014, p. 190-196.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  5. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  6. Published

    Assessment of injection moulded nano-patterned surfaces. / Menotti, Stefano; Bissacco, Giuliano; Hansen, Hans Nørgaard.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  7. Published

    A study on the surface roughness of a thin HSQ coating on a fine milled surface. / Mohaghegh, Kamran; Hansen, Hans Nørgaard; Pranov, Henrik; Kofod, Guggi.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  8. Published

    A system boundary identification method for life cycle assessment. / Li, Tao; Zhang, Hongchao; Liu, Zhichao; Ke, Qingdi; Alting, Leo.

    In: The International Journal of Life Cycle Assessment, Vol. 19, No. 3, 2014, p. 646-660.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  9. Published

    A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Defect and Diffusion Forum, Vol. 348, 2014, p. 9-19.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  10. Published

    Benefit quantification of interoperability in coordinate metrology. / Savio, E.; Carmignato, S.; De Chiffre, Leonardo.

    In: CIRP Annals - Manufacturing Technology, Vol. 63, No. 1, 2014, p. 477-480.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  11. Published

    Bingham plastic fluid flow model in tape casting of ceramics using two doctor blades – analytical approach. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 30, No. 3, 2014, p. 283-288.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  12. Published

    Bio-inspired solutions in design for manufacturing of micro fuel cell. / Omidvarnia, Farzaneh; Hansen, Hans Nørgaard.

    Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014). American Society of Mechanical Engineers, 2014. ESDA2014-20154.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  13. Published

    Centre for Industrial Application of CT scanning (CIA-CT) – Four years of results 2009-2013. / De Chiffre, Leonardo; Andreasen, Jan Lasson; Christensen, Lars Bager; Feidenhans'l, Robert Krarup; Vinter, Brian ; Thestrup Jensen, Niels ; Arentoft, Mogens; Buchard Jørgensen, Per ; Vester-Christensen, Martin; Schmidt, Per René .

    Technical University of Denmark. Department of Mechanical Engineering, 2014. 37 p.

    Publication: ResearchReport – Annual report year: 2014

  14. Published

    Challenges in Design of an Orientation free Micro Direct Methanol Fuel Cell (µDMFC). / Omidvarnia, Farzaneh; Hansen, Hans Nørgaard; Hales, Jan Harry.

    9th International Conference on MicroManufacturing (ICOMM) 2014. 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  15. Published

    Characterisation of surfaces produced by robot-assisted polishing (RAP). / Mohaghegh, Kamran; De Chiffre, Leonardo.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  16. Published

    Characterization of fracture loci in metal forming. / Martins, P.A.F.; Bay, Niels; Tekkaya, A.E.; Atkins, A.G.

    In: International Journal of Mechanical Sciences, Vol. 83, 2014, p. 112-123.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  17. Published

    Characterization of precision of a handling system in high performance transfer press for micro forming. / Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, Mogens.

    In: C I R P Annals, Vol. 63, 2014, p. 497–500.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    Comparison on Computed Tomography using industrial items. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    In: C I R P Annals, Vol. 63, 2014, p. 473–476.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  19. Published

    DeepWind. From idea to 5 MW concept. / Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: Research - peer-reviewSound/Visual production (digital) – Annual report year: 2014

  20. Published

    Design and Optimization of Air-Doped 3-dB Terahertz Fiber Directional Couplers. / Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    Proceedings of CLEO 2014. 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  21. Published

    Design and optimization of mechanically down-doped terahertz fiber directional couplers. / Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    In: Optics Express, Vol. 22, No. 8, 2014, p. 9486-9497.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published
  23. Published
  24. Published

    Experimental investigation on shrinkage and surface replication of injection moulded ceramic parts. / Islam, Aminul; Giannekas, Nikolaos; Marhöfer, David Maximilian; Tosello, Guido; Hansen, Hans Nørgaard.

    Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014). 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  25. Published

    Improvement of replication fidelity in injection moulding of nano structures using an induction heating system. / Menotti, Stefano; Hansen, Hans Nørgaard; Bissacco, Giuliano; Calaon, Matteo; Tang, Peter Torben .

    Proceedings of ANTEC 2014. Society of Plastics Engineers Incorporated (SPE), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  26. Published

    Influence of Injection and Cavity Pressure on the Demoulding Force in Micro-Injection Moulding. / Griffiths, C.A.; Dimov, S.S.; Scholz, S.G.; Tosello, Guido; Rees, A.

    In: Journal of Manufacturing Science and Engineering, Vol. 136, No. 3, 031014, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  27. Published

    Integrated Design, an Approach Towards DfµMA. / Omidvarnia, Farzaneh; Hansen, Hans Nørgaard; Bissacco, Giuliano; Islam, Aminul.

    13th International Design Conference - Design 2014. Design Society, 2014. p. 343-352.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  28. Published

    Interchain tube pressure effect in extensional flows of oligomer diluted nearly monodisperse polystyrene melts. / Rasmussen, Henrik K.; Huang, Qian.

    In: Rheologica Acta, Vol. 53, No. 3, 2014, p. 199-208.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. Published
  30. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    2014. Poster session presented at 5th International Conference on Industrial Computed Tomography (iCT), Wels, Austria.

    Publication: ResearchPoster – Annual report year: 2014

  31. Published

    Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers. / Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko .

    Proceedings - 12th World Pultrusion Conference. 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  32. Published

    Investigation of the spring-in of a pultruded L-shaped profile for various processing conditions and thicknesses. / Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko .

    In: Key Engineering Materials, Vol. 611-612, 2014, p. 273-279.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  33. Published

    Lubricant Film Breakdown and Material Pick-Up in Sheet Forming of Advanced High Strength Steels and Stainless Steels when Using Environmental Friendly Lubricants. / Ceron, Ermanno; Olsson, M.; Bay, Niels.

    In: Advanced Materials Research, Vol. 966-967, 2014, p. 219-227.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  34. Published

    Material characterization of a polyester resin system for the pultrusion process. / Baran, Ismet; Akkerman, Remko ; Hattel, Jesper Henri.

    In: Composites Part B: Engineering, Vol. 64, 2014, p. 194–201.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  35. Published

    Measurement Uncertainty Evaluation in Dimensional X-ray Computed Tomography Using the Bootstrap Method. / Hiller, Jochen; Genta, Gianfranco ; Barbato, Giulio ; De Chiffre, Leonardo; Levi, Raffaello .

    In: International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 4, 2014, p. 617-622.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  36. E-pub ahead of print

    Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches. / Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko ; Tutum, Cem Celal.

    In: Applied Composite Materials, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. E-pub ahead of print

    Microfluidic chip designs process optimization and dimensional quality control. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Garnæs, Jørgen; Nørregaard, Jesper; Li, Wei.

    In: Microsystem Technologies, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    Micro Injection Molding of Thin Walled Geometries with Induction Heating System. / Menotti, Stefano; Hansen, Hans Nørgaard; Bissacco, Giuliano; Grev, Nathaniel Ryan ; Tang, Peter Torben .

    Proceedings ICOMM 2014. 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  39. Published

    Numerical modeling of AA2024-T3 friction stir welding process for residual stress evaluation, including softening effects. / Sonne, Mads Rostgaard; Carlone, Pierpaolo ; Palazzo, Gaetano S. ; Hattel, Jesper Henri.

    In: Key Engineering Materials, Vol. 611-612, 2014, p. 1675-1682.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  40. Published

    Off-Line Testing of Tribo-Systems for Sheet Metal Forming Production. / Bay, Niels; Ceron, Ermanno.

    In: Advanced Materials Research, Vol. 966-967, 2014, p. 3-20.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  41. Published

    Optimum design of pultrusion process via evolutionary multi-objective optimization. / Tutum, Cem Celal; Baran, Ismet; Deb, Kalyanmoy.

    In: International Journal of Advanced Manufacturing Technology, Vol. 72, No. 9-12, 2014, p. 1205-1217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  42. E-pub ahead of print
  43. Published

    Polymer Replication of a Randomly Nanostructured Insert with and without Induction Heating of the Mold. / Menotti, Stefano; Tang, Peter Torben; Hansen, Hans Nørgaard.

    2014. Abstract from Polymer Replication on Nanoscale, Kgs. Lyngby, Denmark.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  44. Published

    Power Cycling and Thermal Stresses Analysis for High Efficiency DC/DC Converter (IFBBC) in Repetitive Avalanche Conditions. / Pittini, Riccardo; Zhang, Zhe; Staliulionis, Zygimantas; Andersen, Michael A. E.

    Proceedings of 18th International Conference ELECTRONICS 2014 . 2014. p. 33-38.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  45. E-pub ahead of print
  46. Published

    Process variations in surface nano geometries manufacture on large area substrates. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Garnæs, Jørgen; Nørregaard, Jesper; Li, W.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  47. E-pub ahead of print

    Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri; Akkerman, Remko .

    In: International Journal of Material Forming, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  48. E-pub ahead of print
  49. Published

    Reproducibility of a reaming test. / Pilny, Lukas; Müller, Pavel; De Chiffre, Leonardo.

    In: International Journal of Manufacturing Research, Vol. 9, No. 2, 2014, p. 157-172.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  50. Published

    Simulation-aided investigation of beam hardening induced errors in CT dimensional metrology. / Tan, Ye; Kiekens, Kim; Welkenhuyzen, Frank; Angel, Jais Andreas Breusch; De Chiffre, Leonardo; Kruth, Jean-Pierre; Dewulf, Wim.

    In: Measurement Science and Technology, Vol. 25, No. 6, 2014, p. 064014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  51. Published

    Stray capacitances in the watt balance operation: electrostatic forces : Paper. / Quagliotti, Danilo; Mana, G.

    In: Metrologia, Vol. 51, No. 2, 2014, p. S72-S79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

Previous 1 2 3 4 5 6 7 8 ...15 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word