Manufacturing Engineering

  1. 2014
  2. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published

    Assessment of injection moulded nano-patterned surfaces. / Menotti, Stefano; Bissacco, Giuliano; Hansen, Hans Nørgaard.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  4. Published

    A study on the surface roughness of a thin HSQ coating on a fine milled surface. / Mohaghegh, Kamran; Hansen, Hans Nørgaard; Pranov, Henrik; Kofod, Guggi.

    Proceedings of the 14th euspen International Conference. euspen, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  5. Published

    A system boundary identification method for life cycle assessment. / Li, Tao; Zhang, Hongchao; Liu, Zhichao; Ke, Qingdi; Alting, Leo.

    In: The International Journal of Life Cycle Assessment, Vol. 19, No. 3, 2014, p. 646-660.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  6. Published

    A TEM Study on the Ti-Alloyed Grey Iron. / Moumeni, Elham; Tiedje, Niels Skat; Grumsen, Flemming Bjerg; Danielsen, Hilmar Kjartansson; Horsewell, Andy; Hattel, Jesper Henri.

    TMS2014 Annual Meeting Supplemental Proceedings. Minerals, Metals & Materials Society, 2014. p. 943-950.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  7. Published

    A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Defect and Diffusion Forum, Vol. 348, 2014, p. 9-19.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  8. Published

    Benefit quantification of interoperability in coordinate metrology. / Savio, E.; Carmignato, S.; De Chiffre, Leonardo.

    In: CIRP Annals - Manufacturing Technology, Vol. 63, No. 1, 2014, p. 477-480.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  9. Published

    Bingham plastic fluid flow model in tape casting of ceramics using two doctor blades – analytical approach. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 30, No. 3, 2014, p. 283-288.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  10. Published

    Bio-inspired solutions in design for manufacturing of micro fuel cell. / Omidvarnia, Farzaneh; Hansen, Hans Nørgaard.

    Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014). American Society of Mechanical Engineers, 2014. ESDA2014-20154.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  11. Published
Previous 1 2 3 4 5 6 7 8 ...78 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word