Department of Mechanical Engineering

  1. 2014
  2. Published

    Allometric equations for maximum filtration rate in blue mussels Mytilus edulis and importance of condition index. / Riisgård, Hans Ulrik ; Larsen, Poul Scheel; Pleissner, Daniel .

    In: Helgoland Marine Research, Vol. 68, No. 1, 2014, p. 193-198.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  4. Published

    An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders. / Paulsen, Bo Terp; Bredmose, Henrik; Bingham, Harry B.

    In: Coastal Engineering, Vol. 86, 2014, p. 57-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  5. E-pub ahead of print
  6. Published

    An Improved Coupling of Numerical and Physical Models for Simulating Wave Propagation. / Yang, Zhiwen; Liu, Shu-xue; Li, Jin-xuan.

    In: China Ocean Engineering, Vol. 28, No. 1, 2014, p. 1-16.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  7. Published

    Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Shabadi, Rajashekhara ; Rechendorff, Kristian ; Schou, Jørgen; Ambat, Rajan.

    Light Metals 2014. ed. / John Grandfield. John Wiley & Sons Ltd, 2014. p. 369-373.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  8. Published
  9. Published
  10. Published

    Anti-corrosive Conversion Coating on Aluminium Alloys Using High Temperature Steam. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from Corrosion and Prevention 2014, Darwin, Australia.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  11. Published
  12. Published

    A personal matter? An investigation of students design process experiences when using a heuristic or a systematic method. / Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin .

    In: Design Studies, Vol. 35, No. 2, 2014, p. 133-159.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  13. Published

    A plateau–valley separation method for textured surfaces with a deterministic pattern. / Godi, Alessandro; Kühle, Anders; De Chiffre, Leonardo.

    In: Precision Engineering, Vol. 38, No. 1, 2014, p. 190-196.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published

    A proposal for a classification of product-related dependencies in development of mechatronic products. / Torry-Smith, Jonas; Mortensen, Niels Henrik; Achiche, Sofiane.

    In: Research in Engineering Design, Vol. 25, No. 1, 2014, p. 53-74.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  15. Published

    Aquaculture as a part of a multi-use platform. / Christensen, Erik Damgaard; Svenstrup Petersen, Ole ; Aarup Ahrensberg, Nick; Møhlenberg, Flemming; Zanuttigh, Barbara .

    Proceedings of the 5th Offshore Mariculture Conference. 2014.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  16. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  17. Published

    A system boundary identification method for life cycle assessment. / Li, Tao; Zhang, Hongchao; Liu, Zhichao; Ke, Qingdi; Alting, Leo.

    In: The International Journal of Life Cycle Assessment, Vol. 19, No. 3, 2014, p. 646-660.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Defect and Diffusion Forum, Vol. 348, 2014, p. 9-19.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  19. Published

    AZ91C magnesium alloy modified by Cd. / Shabadi, R.; Ambat, Rajan; Dwarakadasa, E.S.

    In: Materials & Design, Vol. 53, 2014, p. 445-451.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. Published

    Band gap structure modification of amorphous anodic Al oxide film by Ti-alloying. / Canulescu, Stela; Rechendorff, K.; Borca, C. N.; Jones, N. C.; Bordo, Kirill; Schou, Jørgen; Nielsen, Lars Pleth; Hoffmann, S. V.; Ambat, Rajan.

    In: Applied Physics Letters, Vol. 104, No. 12, 121910, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  21. Published

    Bingham plastic fluid flow model in tape casting of ceramics using two doctor blades – analytical approach. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 30, No. 3, 2014, p. 283-288.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published

    Characterization of steam generated anti-corrosive oxide films on Aluminium alloys. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from 225th ECST Meeting, Orlando, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  23. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  24. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  25. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  26. Published

    Corrigendum to “Second-order theory for coupling 2D numerical and physical wave tanks-Derivation, evaluation and experimental validation” [Coast. Eng. 71 (2013) 37–51]. / Yang, Zhiwen; Liu, Shuxue; Bingham, Harry B.; Li, Jinxuan.

    In: Coastal Engineering, Vol. 85, 2014, p. 87-88.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  27. Published
  28. Published

    Cross-shore redistribution of nourished sand near a breaker bar. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen.

    In: Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 140, No. 2, 2014, p. 125-134.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  30. Published

    DeepWind. From idea to 5 MW concept. / Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: Research - peer-reviewSound/Visual production (digital) – Annual report year: 2014

  31. Published

    Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms. / Pierobon, Leonardo; Haglind, Fredrik.

    In: Applied Energy, Vol. 118, 2014, p. 156–165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  32. Published

    Design methodology for flexible energy conversion systems accounting for dynamic performance. / Pierobon, Leonardo; Casati, Emiliano ; Casella, Francesco ; Haglind, Fredrik; Colonna, Piero .

    In: Energy, Vol. 68, 2014, p. 667-679.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  33. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  34. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  35. Published

    Development of a numerical 2-dimensional beach evolution model. / Baykal, Cüneyt.

    In: Turkish Journal of Earth Sciences, Vol. 23, No. 2, 2014, p. 215-231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  36. Published

    Direct observation of grain boundary migration during recrystallization within the bulk of a moderately deformed aluminium single crystal. / Van Boxel, Steven; Schmidt, Søren; Ludwig, Wolfgang; Zhang, Yubin; Juul Jensen, Dorte; Pantleon, Wolfgang.

    In: Materials Transactions, Vol. 55, No. 1, 2014, p. 128-136.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  39. Published

    Elucidating of rotation speed in friction stir welding of pure copper: Thermal modeling. / Jabbari, Masoud.

    In: Computational Materials Science, Vol. 81, 2014, p. 296-302.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  40. Published

    Estimation of burst-mode LDA power spectra. / Velte, Clara Marika; George, William K.; Buchhave, Preben.

    In: Experiments in Fluids, Vol. 55, No. 3, 1674, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  41. Published
  42. Published
  43. E-pub ahead of print
  44. Published

    Explicit free‐floating beam element. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 98, No. 1, 2014, p. 59-78.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  45. Published
  46. Published

    Extended neural network-based scheme for real-time force tracking with magnetorheological dampers. / Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker.

    In: Structural Control and Health Monitoring, Vol. 21, No. 2, 2014, p. 225–247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  47. Published

    Formation and development of a breaker bar under regular waves. Part 2: Sediment transport and morphology. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 88, 2014, p. 55-68.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  48. Published

    How to determine composite material properties using numerical homogenization. / Andreassen, Erik; Andreasen, Casper Schousboe.

    In: Computational Materials Science, Vol. 83, 2014, p. 488-495.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  49. Published
  50. Published

    Influence of light sheet separation on SPIV measurement in a large field spanwise plane : Paper. / Foucaut, J M; Coudert, S; Braud, C; Velte, Clara Marika.

    In: Measurement Science and Technology, Vol. 25, No. 3, 035304, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  51. Published

    Interchain tube pressure effect in extensional flows of oligomer diluted nearly monodisperse polystyrene melts. / Rasmussen, Henrik K.; Huang, Qian.

    In: Rheologica Acta, Vol. 53, No. 3, 2014, p. 199-208.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  52. Published

    Interface diagram: Design tool for supporting the development of modularity in complex product systems. / Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf.

    In: Concurrent Engineering: Research and Applications, Vol. 22, No. 1, 2014, p. 62-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  53. Published
  54. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    2014. Poster session presented at 5th International Conference on Industrial Computed Tomography (iCT), Wels, Austria.

    Publication: ResearchPoster – Annual report year: 2014

  55. Published
  56. Published

    Investigation of ammonia/water hybrid absorption/compression heat pumps for heat supply temperatures above 100 °C. / Jensen, Jonas Kjær; Reinholdt, Lars; Markussen, Wiebke Brix; Elmegaard, Brian.

    2014. Paper presented at International Sorption Heat Pump Conference (ISHPC 2014), Washington, United States.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  57. Published
  58. Published
  59. Published

    Lift of a Rotating Circular Cylinder in Unsteady Flows. / Carstensen, Stefan; Mandviwalla, Xerxes ; Vita, Luca; Schmidt Paulsen, Uwe.

    In: Journal of Ocean and Wind Energy, Vol. 1, No. 1, 2014, p. 41-49.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  60. Published

    Measurement Uncertainty Evaluation in Dimensional X-ray Computed Tomography Using the Bootstrap Method. / Hiller, Jochen; Genta, Gianfranco ; Barbato, Giulio ; De Chiffre, Leonardo; Levi, Raffaello .

    In: International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 4, 2014, p. 617-622.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  61. E-pub ahead of print

    Memory resistive switching in CeO2-based film microstructures patterned by a focused ion beam. / Velichko, A.; Boriskov, P.; Grishin, A.; Khartsev, S.; Yar, Mazher Ahmed; Muhammed, M.

    In: Thin Solid Films, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  62. Published

    Moving least squares simulation of free surface flows. / Felter, C.L.; Walther, Jens Honore; Henriksen, Christian.

    In: Computers & Fluids, Vol. 91, 2014, p. 47-56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  63. Published

    Multiple regression models for the prediction of the maximum obtainable thermal efficiency of organic Rankine cycles. / Larsen, Ulrik; Pierobon, Leonardo; Wronski, Jorrit; Haglind, Fredrik.

    In: Energy, Vol. 65, No. 1, 2014, p. 503-510.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  64. Published

    Nanowires and nanotubes from π-conjugated organic materials fabricated by template wetting. / Bordo, Kirill; Schiek, Manuela; Rubahn, Horst-Günter.

    In: Applied Physics A, Vol. 114, No. 4, 2014, p. 1067-1074.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  65. Published
  66. Published

    Numerical Analysis of Scavenge Flow and convective heat transfer in Large Two-Stroke Marine Diesel Engines. / Sigurdsson, Eythor; Ingvorsen, Kristian Mark; Jensen, Michael Vincent; Mayer, S.; Matlok, S.; Walther, Jens Honore.

    In: Applied Energy, Vol. 123, 2014, p. 37-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  67. Published

    Numerical analysis of transport phenomena for designing of ejector in PEM forklift system. / Hosseinzadeh, Elham; Rokni, Masoud; Jabbari, Masoud; Mortensen, Henrik.

    In: International Journal of Hydrogen Energy, Vol. 39, No. 12, 2014, p. 6664-6674.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  68. Published

    Numerical and experimental investigation of bump foil mechanical behaviour. / Larsen, Jon Steffen; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Tribology International, Vol. 74, 2014, p. 46–56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  69. Published

    Numerical simulation of cropping. / Tvergaard, Viggo; Hutchinson, John W.

    In: Journal of Applied Mechanics, Vol. 81, No. 7, 071002, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  70. Published

    On gear tooth stiffness evaluation. / Pedersen, Niels Leergaard; Jørgensen, Martin Felix.

    In: Computers & Structures, Vol. 135, 2014, p. 109-117.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  71. Published
  72. Published

    Optimization of the overall energy consumption in cascade fueling stations for hydrogen vehicles. / Rothuizen, Erasmus Damgaard; Rokni, Masoud.

    In: International Journal of Hydrogen Energy, Vol. 39, No. 1, 2014, p. 582-592.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  73. Published

    Perceiving design as modelling: A cybernetic systems perspective. / Maier, Anja; Wynn, David C.; Howard, Thomas J.; Andreasen, Mogens Myrup.

    An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations. ed. / A. Chakrabarti; L.T.M. Blessing. Springer, 2014. p. 133-148.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  74. Published

    Performance analysis of a Kalina cycle for a central receiver solar thermal power plant with direct steam generation. / Modi, Anish; Haglind, Fredrik.

    In: Applied Thermal Engineering, Vol. 65, No. 1-2, 2014, p. 201-208.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  75. E-pub ahead of print
  76. Published

    Potential for production of ‘mini-mussels’ in Great Belt (Denmark) evaluated on basis of actual and modeled growth of young mussels Mytilus edulis. / Riisgård, Hans Ulrik; Lundgreen, Kim; Larsen, Poul Scheel.

    In: Aquaculture International, 2014, p. 859-885.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  77. Published

    Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp. / Bell, Ian H.; Wronski, Jorrit; Quoilin, Sylvain; Lemort, Vincent.

    In: Industrial & Engineering Chemistry Research, Vol. 53, No. 6, 2014, p. 2498−2508.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  78. Published

    Self-organisation and motion in plants. / Lenau, Torben Anker (Invited author); Hesselberg, T. (Invited author).

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 9055, 90550F, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  79. Published

    Somatic growth of mussels Mytilus edulis in field studies compared to predictions using BEG, DEB, and SFG models. / Larsen, Poul Scheel; Filgueira, Ramón; Riisgård, Hans Ulrik.

    In: Journal of Sea Research, Vol. 88, 2014, p. 100-108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  80. Published

    Steam generated conversion coating on aluminium alloys. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from AeroMat, Orlando, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  81. Published

    Strain Engineering of Kapitza Resistance in Few-Layer Graphene. / Chen, Jie; Walther, Jens Honore; Koumoutsakos, Petros.

    In: Nano Letters, Vol. 14, No. 2, 2014, p. 819–825.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  82. Published

    Stray capacitances in the watt balance operation: electrostatic forces : Paper. / Quagliotti, Danilo; Mana, G.

    In: Metrologia, Vol. 51, No. 2, 2014, p. S72-S79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  83. Published
  84. Published
  85. Published

    The 5 MW DeepWind floating offshore vertical wind turbine concept design - status and perspective. / Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Kragh, Knud Abildgaard; Nielsen, Per Hørlyk; Baran, Ismet; Ritchie, E.; Leban, K.M.; Svendsen, H.; Berthelsen, P.A.; Bussel, G.J.W.van ; Ferreira, C.S.; Chrysochoidis-Antsos, N.

    Proceedings - EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  86. Published

    The effect of dead time on randomly sampled power spectral estimates. / Buchhave, Preben; Velte, Clara Marika; George, William K.

    In: Experiments in Fluids, Vol. 55, No. 2, 1680, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  87. Published

    The missing link between the extensional dynamics of polymer melts and solutions. / Rasmussen, Henrik K.; Huang, Qian.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 204, 2014, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  88. Published

    Thermocline thermal storage systems for concentrated solar power plants: One-dimensional numerical model and comparative analysis. / Modi, Anish; Pérez-Segarra, Carlos David.

    In: Solar Energy, Vol. 100, 2014, p. 84-93.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  89. Published

    ThermoCycle: A Modelica library for the simulation of thermodynamic systems. / Quoilin, Sylvain; Desideri, Adriano; Wronski, Jorrit; Bell, Ian; Lemort, Vincent.

    Proceedings - 10th International Modelica Conference. Modelica Association, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  90. Published

    Thermodynamic analysis of an upstream petroleum plant operated on a mature fi eld. / Nguyen, Tuong-Van; Jacyno, Tomasz ; Breuhaus, Peter ; Voldsund, Mari ; Elmegaard, Brian.

    In: Energy, Vol. 68, 2014, p. 454-469.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  91. Published

    The start-up analysis of a PEM fuel cell system in vehicles. / Rabbani, Raja Abid; Rokni, Masoud; Hosseinzadeh, Elham; Mortensen, Henrik Hilleke.

    In: International Journal of Green Energy, Vol. 11, No. 1, 2014, p. 91-111.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  92. Published

    The Use of Modelling Methods for Product Configuration in Industrial Applications. / Hvam, Lars; Bonev, Martin; Haug, Anders ; Mortensen, Niels Henrik.

    Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014). ed. / T.D. Brunoe. Springer, 2014. p. 529-539 (Lecture Notes in Production Engineering).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  93. Published
  94. Published

    Topology optimization of fail-safe structures using a simplified local damage model. / Jansen, Miche; Lombaert, Geert; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 4, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  95. Published
  96. Published

    Tuned mass absorber on a flexible structure. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Sound and Vibration, Vol. 333, No. 6, 2014, p. 1577-1595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  97. Published

    Visualizing Research Data Records for their Better Management. / Ball, Alexander; Darlington, Mansur; Howard, Thomas J.; McMahon, Chris; Culley, Steve.

    In: Journal of Digital Information, Vol. 13, No. 1, 2014, p. 83-93.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  98. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 2: Application examples. / Schlechtingen, Meik; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 14, 2014, p. 447-460.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  99. 2013
  100. Published

    2nd Generation Alkaline Electrolysis : Final report. / Yde, Lars; Kjartansdóttir, Cecilia Kristin; Allebrod, Frank; Mogensen, Mogens Bjerg; Møller, Per; Hilbert, Lisbeth R.; Nielsen, Peter Tommy; Mathiesen, Troels; Jensen, Jørgen; Andersen, Lars; Dierking, Alexander.

    Århus University Business and Social Science – Centre for Energy Technologies, 2013. 72 p.

    Publication: ResearchReport – Annual report year: 2013

  101. Published

    3D Modeling and Testing of Contact Problems in Resistance Welding. / Nielsen, Chris Valentin; Martins, Paulo A. F. (Supervisor); Bay, Niels (Main supervisor); Zhang, Wenqi (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 236 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  102. Published

    3D thermo-chemical-mechanical analysis of the pultrusion process. / Baran, Ismet; Hattel, Jesper Henri; Tutum, Cem C.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 169-176.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  103. Published

    A 2D finite element implementation of the Fleck–Willis strain-gradient flow theory. / Nielsen, Kim Lau; Niordson, Christian Frithiof.

    In: European Journal of Mechanics A - Solids, Vol. 41, 2013, p. 134-142.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  104. Published

    A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications. / Yagüe-Fabra, J.A.; Ontiveros, S.; Jiménez, R.; Chitchian, S.; Tosello, Guido; Carmignato, S.

    In: C I R P Annals, Vol. 62, No. 1, 2013, p. 531-534.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  105. Published

    A capability study of micro moulding for nano fluidic system manufacture. / Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido; Garnaes, J.; Nørregaard, J.; Li, W.

    Proceedings of the 13th euspen International Conference. European Society for Precision Engineering and Nanotechnology, 2013. p. 105-108.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  106. Published

    Accuracy of transferring microparts in a multi stage former. / Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, Mogens.

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 900-907.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  107. Published

    A CFD Approach for Prediction of Unintended Porosities in Aluminum Syntactic Foam: A Preliminary Study. / Li, Shizhao; Spangenberg, Jon; Hattel, Jesper Henri.

    Proceedings of the 8th International Conference on Porous Metals and Metallic Foams. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  108. Published

    A CFD-Model for prediction of unintended porosities in metal matrix composites : A preliminary study. / Li, Shizhao; Spangenberg, Jon; Hattel, Jesper Henri.

    Proceedings of the 19th international conference on composite materials. ICCM19 Secretariat, 2013. p. 1625-1632.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  109. Published

    A Classification of Procedural Errors in the Definition of Functional Requirements in Axiomatic Design Theory. / Thompson, Mary Kathryn.

    Proceedings of the 7th International Conference on Axiomatic Design. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  110. Published

    A Classification of Robust Design Methods. / Christensen, Martin Ebro.

    ICED 2013. International Conference on Engineering Design. Design Society, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  111. Published
  112. Published

    A comparison of advanced heat recovery power cycles in a combined cycle for large ships. / Larsen, Ulrik; Haglind, Fredrik; Sigthorsson, Oskar.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Beijing : Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  113. Published
  114. Published

    Acoustical topology optimization of Zwicker's loudness with Padé approximation. / Kook, Junghwan; Jensen, Jakob Søndergaard; Wang, Semyung.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 255, 2013, p. 40-66.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  115. Published

    Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing. / Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo; Ramsing, J.

    2013. Paper presented at 11th International Symposium on Measurement Technology and Intelligent Instruments, Aachen, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  116. Published

    Actively lubricated bearings applied as calibrated shakers to aid parameter identification in rotordynamics. / Santos, Ilmar; Cerda Varela, Alejandro Javier.

    Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Vol. 7B American Society of Mechanical Engineers, 2013. GT2013-95674.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  117. Published

    Additive Manufacturing: Multi Material Processing and Part Quality Control. / Pedersen, David Bue; De Chiffre, Leonardo (Supervisor); Hansen, Hans Nørgaard (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 246 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  118. Published

    A deformation mechanism map for polycrystals modeled using strain gradient plasticity and interfaces that slide and separate. / Dahlberg, Carl F.O.; Faleskog, Jonas; Niordson, Christian Frithiof; Legarth, Brian Nyvang.

    In: International Journal of Plasticity, Vol. 43, 2013, p. 177-195.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  119. Published

    A Deported View Concept for Touch Interaction. / Alapetite, Alexandre; Andersen, Henning Boje; Fogh, Rune; Özkil, Ali Gürcan.

    ACHI 2013 : The Sixth International Conference on Advances in Computer-Human Interactions. IARIA, 2013. p. 22-27.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  120. Published

    Adiabatic Liquid Piston Compressed Air Energy Storage. / Petersen, Tage; Elmegaard, Brian; Pedersen, Allan Schrøder.

    Danish Technological Institute, 2013. 52 p.

    Publication: ResearchReport – Annual report year: 2013

  121. Published

    Adjustable ETHD lubrication applied to the improvement of dynamic performance of flexible rotors supported by active TPJB. / Salazar, Jorge Andrés González; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  122. Published
  123. Published

    Advanced Surface Technology. / Møller, Per; Nielsen , Lars Pleht .

    Møller & Nielsen , 2013. 1240 p.

    Publication: ResearchBook – Annual report year: 2013

  124. Published

    Advancements on the simulation of the micro injection moulding process. / Marhöfer, David Maximilian; Tosello, Guido; Hansen, Hans Nørgaard; Islam, Aminul.

    Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. 4M Association, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  125. Published

    A finite volume alternate direction implicit approach to modeling selective laser melting. / Hattel, Jesper Henri; Mohanty, Sankhya.

    ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics. 2013. p. 91-98 (ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  126. Published

    A global condition monitoring system for wind turbines. / Schlechtingen, Meik; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S150).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  127. Published

    A Guided Tour through Classroom and Workshops: The Physical Staging of the Product Analysis Method (slide show). / Hansen, Claus Thorp (Author); Lenau, Torben Anker (Author).

    2013. American Society for Engineering Education.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  128. Published

    A high order solver for the unbounded Poisson equation. / Hejlesen, Mads Mølholm; Rasmussen, Johannes Tophøj; Chatelain, Philippe ; Walther, Jens Honore.

    2013. Abstract from Workshop on Hybrid Particle-Continuum Methods in Computational Materials Physics, Jülich, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  129. Published

    A high order solver for the unbounded Poisson equation. / Hejlesen, Mads Mølholm; Rasmussen, Johannes Tophøj; Chatelain, Philippe; Walther, Jens Honore.

    In: Journal of Computational Physics, Vol. 252, 2013, p. 458-467.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  130. Published

    All-hexahedral meshing and remeshing for multi-object manufacturing applications. / Nielsen, Chris Valentin; Fernandes, J.L.M.; Martins, P.A.F.

    In: Computer-Aided Design, Vol. 45, No. 5, 2013, p. 911-922.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  131. Published

    A Methodology for Off-line Evaluation of New Environmentally Friendly Tribo-systems for Sheet Metal Forming. / Ceron, Ermanno; Bay, Niels.

    In: CIRP Annals - Manufacturing Technology, Vol. 62, 2013, p. 231–234.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  132. Published

    A motion study of a manipulator for transferring microparts in a multi stage former. / Mahshid, Rasoul; Hansen, Hans Nørgaard; Hansen, Casper; Arentoft, Mogens.

    ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. Vol. 2 American Society of Mechanical Engineers, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  133. Published

    Analysis of demoulding in micro injection moulding of cyclic-olefin-copolymer microfluidic systems. / Tosello, Guido; Griffiths, C.A.; Dimov, S.S.; Scholz, S.G.; Rees, A.; Whiteside, B.

    Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. ed. / Sabino Azcarate; Stefan Dimov. 4M Association, 2013. p. 65-68.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  134. Published

    Analysis of mode-hopping effect in Fabry–Pérot multiple-quantum well laser diodes via low frequency noise investigation. / Pralgauskaitė, Sandra; Palenskis, Vilius; Matukas, Jonas; Šaulys, Bronius; Kornijčuk, Vladimir; Verdingovas, Vadimas.

    In: Solid-State Electronics, Vol. 79, 2013, p. 104-110.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  135. Published

    Analysis of phononic bandgap structures with dissipation. / Andreassen, Erik; Jensen, Jakob Søndergaard.

    In: Journal of Vibration and Acoustics, Vol. 135, No. 4, 041015, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  136. Published

    Analysis of turbulent wake behind a wind turbine. / Kermani, Nasrin Arjomand; Andersen, Søren Juhl; Sørensen, Jens Nørkær; Shen, Wen Zhong.

    Proceedings of the 2013 International Conference on aerodynamics of Offshore Wind Energy Systems and wakes (ICOWES2013). ed. / WenZhong Shen. Technical University of Denmark, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  137. Published

    A new capillary gripper for mini and micro parts. / Fantoni, Gualtiero; Hansen, Hans Nørgaard; Santochi, Marco.

    In: C I R P Annals, Vol. 62, No. 1, 2013, p. 17-20.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  138. Published
  139. Published

    A new multi-zone model for porosity distribution in Al–Si alloy castings. / Tiedje, Niels Skat; Taylor, John A.; Easton, Mark A.

    In: Acta Materialia, Vol. 61, No. 8, 2013, p. 3037-3049.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  140. Published

    A new numerical framework to simulate viscoelastic free-surface flows with the finite-volume method. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    2013. Paper presented at 1st International Conference on Rheology and Modeling of Materials (ic-rmm1), Miskolc-Lillafüred, Hungary.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  141. Published

    A new PI tuning method for an industrial process: A case study from a micro-cogeneration system. / Saglam, Gaye; Tutum, Cem Celal; Kurtulan, Sa,man.

    In: Energy Conversion and Management, Vol. 67, 2013, p. 226-239.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  142. Published

    A new procedure for characterizing textured surfaces with a deterministic pattern of valley features. / Godi, Alessandro; Kühle, A; De Chiffre, Leonardo.

    In: Measurement Science and Technology, Vol. 24, No. 8, 085009, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  143. Published

    A New Rig for Testing Textured Surfaces in Pure Sliding Conditions. / Godi, Alessandro; Grønbæk, J.; Mohaghegh, Kamran; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 50, No. 3, 2013, p. 397-405.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  144. Published
  145. Published

    An improved interface penalisation for vortex methods. / Hejlesen, Mads Mølholm; Koumoutsakos, Petros; Leonard, Anthony; Walther, Jens Honore.

    2013. Abstract from 3rd International Conference on Particle-Based methods, Stuttgart, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  146. Published

    An industrial batch dryer simulation tool based on the concept of the characteristic drying curve. / Kærn, Martin Ryhl; Elmegaard, Brian; Schneider, P.

    6th Nordic Drying Conference. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  147. Published

    An inquiry on managers use of decision-making tools in the core front end of the innovation process. / Appio, Francesco P. ; Achiche, Sofiane ; McAloone, Tim C.; Howard, Thomas J.

    In: International Journal of Product Development, Vol. 18, No. 6, 2013, p. 461-491.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  148. Published

    An Iterative Brinkman penalization for particle vortex methods. / Walther, Jens Honore; Hejlesen, Mads Mølholm; Leonard, A.; Koumoutsakos, P.

    In: American Physical Society. Bulletin, Vol. 58, No. 8, Abstract: R5.00008, 2013.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2013

  149. Published

    Anodization of sputter deposited Al-Zr coatings and microstructural issues. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Schou, Jørgen; Ambat, Rajan; Rechendorff, Kristian ; Christensen, Bjarke; Pleth Nielsen, Lars.

    Proceedings of EUROCORR 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  150. Published

    A non-contact 3D method to characterize the surface roughness of castings. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat ; Hansen, Hans Nørgaard.

    In: Journal of Materials Processing Technology, Vol. 213, No. 1, 2013, p. 59-68.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  151. Published

    A note on added resistance for slow ships. / Bingham, Harry B.; Amini Afshar, Mostafa.

    2013.

    Publication: ResearchWorking paper – Annual report year: 2013

  152. Published

    A numerical shoreline model for shorelines with large curvature. / Kærgaard, Kasper Hauberg; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 74, 2013, p. 19-32.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  153. Published

    Application of Complementary Techniques for Advanced Characterization of White Etching Cracks. / West, Ole; Diederichs, Annika M.; Alimadadi, Hossein; Dahl, Kristian Vinter; Somers, Marcel A. J.

    In: Praktische Metallographie, Vol. 50, No. 6, 2013, p. 410-431.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  154. Published

    Application of Dimethyl Ether in Compression Ignition Engines. / Hansen, Kim Rene; Sorenson, Spencer C (Supervisor); Schramm, Jesper (Main supervisor); Sivebæk, Ion Marius (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 164 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  155. Published

    Application of nanometrology to polymer production. / Garnaes, Jørgen; Tanzi, Simone; Calaon, Matteo; Cech, Jiri; Taboryski, Rafael J.; Hansen, Hans Nørgaard; Nørregaard, Jesper ; Madsen, Morten Hannibal ; Hansen, Poul-Erik ; Sonne, Mads Rostgaard; Pranov, Henrik ; Kofod, Guggi; Lam, Yee Cheong ; Hattel, Jesper Henri; Matteucci, Marco; Christiansen, Thomas Lehrmann; Friis, Søren; Thylstrup Christensen, Mette ; Li, Wei ; Wilson, Sandra ; Kutchinsky, Jonatan ; Tosello, Guido.

    2013. Abstract from 16th International Congress of Metrology, Parisf, France.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  156. Published

    A Product Analysis Method and its Staging to Develop Redesign Competences. / Hansen, Claus Thorp; Lenau, Torben Anker.

    In: Advances in Engineering Education, Vol. 3, No. 4, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  157. Published
  158. Published

    A socio-technical analysis of work with ideas in NPD: an industrial case study. / Gish, Liv; Hansen, Claus Thorp.

    In: Research in Engineering Design, Vol. 24, 2013, p. 411–427.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  159. Published

    Assessment of modified gold surfaced titanium implants on skeletal fixation. / Zainali, Kasra; Danscher, Gorm; Jakobsen, Thomas; Baas, Jorgen; Møller, Per; Bechtold, Joan E.; Soballe, Kjeld.

    In: Journal of Biomedical Materials Research. Part A, Vol. 101 A, No. 1, 2013, p. 195-202.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  160. Published

    A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    2013. Paper presented at 7th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2013), Madrid, Spain.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  161. Published

    A Vortex Generator Flow Model Based on Self-Similarity : Technical notes. / Velte, Clara Marika.

    In: AIAA Journal, Vol. 51, No. 2, 2013, p. 526-529.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  162. Published

    Backfilling of a Scour Hole around a Pile in Waves and Current. / Sumer, B. Mutlu; Petersen, Thor Ugelvig; Locatelli, Luca; Fredsøe, Jørgen; Musumeci, Rosaria E.; Foti, Enrico.

    In: Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 139, No. 1, 2013, p. 9-23.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  163. Published

    Barriers to Superfast Water Transport in Carbon Nanotube Membranes. / Walther, Jens Honore; Ritos, Konstantinos ; Cruz-Chu, Eduardo R. ; Megaridis, Constantine M. ; Koumoutsakos, Petros .

    In: Nano Letters, Vol. 13, 2013, p. 1910-1914.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  164. Published

    Beam section stiffness properties usig 3D finite elements. / Couturier, Philippe; Krenk, Steen; Høgsberg, Jan Becker.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  165. Published

    Benchmarking bio-inspired designs with brainstorming in terms of novelty of design outcomes. / Keshwani, Sonal; Lenau, Torben Anker; Ahmed-Kristensen, Saeema; Chakrabarti, Amaresh.

    ICED 2013. International Conference on Engineering Design. Design Society, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  166. Published

    Bioenergetic model predictions of actual growth and allometric transitions during ontogeny of juvenile blue mussels Mytilus edulis. / Larsen, Poul Scheel; Lundgreen, Kim; Riisgård, Hans Ulrik.

    Mussels: Ecology, Life Habits and Control. ed. / J. Nowak; M. Kozlowski. Nova Science Publishers, Incorporated, 2013. p. 101-122.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  167. Published

    Bio-inspired functional surfaces for advanced applications. / Malshe, Ajay; Rajurkar, Kamlakar; Samant, Anoop; Hansen, Hans Nørgaard; Bapat, Salil; Jiang, Wenping.

    In: CIRP Annals - Manufacturing Technology, Vol. 62, No. 2, 2013, p. 607-628.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  168. Published
  169. Published

    Biotribological properties of bovine submaxillary mucin (BSM) at the hydrophobic interface. / Madsen, Jan Busk; Nikogeorgos, Nikolaos; Abou Hachem, Maher ; Svensson, Birte; Lee, Seunghwan.

    In: European Cells & Materials, Vol. 26, No. Suppl. 6, 2013, p. 111.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2014

  170. Published

    Capability Handbook- offline metrology. / Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido; Hansen, Hans Nørgaard.

    Hi-Micro project, 2013. 73 p.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  171. Published

    Catastrophic failure of polymer melts during extension. / Rasmussen, Henrik K.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 198, 2013, p. 136-140.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  172. Published
  173. Published

    Challenges and Opportunities for Establishing Design as a Research Discipline in Civil and Environmental Engineering. / Thompson, Mary Kathryn (Invited author).

    Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  174. Published

    Challenges in balancing the amount of solution information in requirement specifications for embedded products. / Savolainen, Juha; Hauksdóttir, Dagný; Mannion, Mike.

    21st IEEE International Requirements Engineering Conference (RE). IEEE, 2013. p. 256-260.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  175. Published

    Challenges in Designing Mechatronic Systems. / Torry-Smith, Jonas; Qamar, Ahsan; Achiche, Sofiane; Wikander, Jan; Mortensen, Niels Henrik; During, Carl.

    In: Journal of Mechanical Design, Vol. 135, 2013, p. Paper 011005.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  176. Published

    Characterisation and Testing of Multifunctional Surfaces. / Godi, Alessandro; De Chiffre, Leonardo (Main supervisor); Hansen, Hans Nørgaard (Supervisor); Klit, Peder (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 290 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  177. Published
  178. Published
  179. Published

    Comparative study of the sources of exergy destruction on four North Sea oil and gas platforms. / Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian; Ertesvåg, Ivar Ståle; Røsjorde, Audun; Jøssang, Knut; Kjelstrup, Signe.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2013. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  180. Published

    Comparison of fin-and-tube interlaced and face split evaporators with flow maldistribution and compensation. / Kærn, Martin Ryhl; Elmegaard, Brian; Larsen, Lars Finn Sloth.

    In: International Journal of Refrigeration, Vol. 36, No. 1, 2013, p. 203-214.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  181. Published

    Comparison of operation optimization methods in energy system modelling. / Ommen, Torben Schmidt; Markussen, Wiebke Brix; Elmegaard, Brian.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  182. Published

    Comparisons of Means for Estimating Sea States from an Advancing Large Container Ship. / Nielsen, Ulrik Dam; Andersen, Ingrid Marie Vincent; Koning, Jos.

    Proceedings of the PRADS 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  183. Published

    Compliant Foil Journal Bearings - Investigation of Dynamic Properties. / Larsen, Jon Steffen; Santos, Ilmar.

    2013. Paper presented at SIRM 2013 , Berlin, Germany.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  184. Published

    Composition, structure and properties of POPC–triolein mixtures. Evidence of triglyceride domains in phospholipid bilayers. / Duelund, Lars; Jensen, Grethe Vestergaard; Hannibal-Bach, Hans Kristian; Ejsing, Christer S.; Pedersen, Jan Skov; Pakkanen, Kirsi I.; Ipsen, John Hjort.

    In: Biochimica et Biophysica Acta (BBA)/Biomembranes, Vol. 1828, No. 8, 2013, p. 1909-1917.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  185. Published

    Computational Approaches for Modeling the Multiphysics in Pultrusion Process. / Carlone, P.; Baran, Ismet; Hattel, Jesper Henri; Palazzo, G.S.

    In: Advances in Mechanical Engineering, Vol. 2013, 301875, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  186. Published

    Computed tomography as a tool for tolerance verification of industrial parts. / Müller, Pavel; Cantatore, Angela; Andreasen, J.L.; Hiller, Jochen; De Chiffre, Leonardo.

    In: Procedia CIRP, Vol. 10, 2013, p. 125-132.

    Publication: Research - peer-reviewConference article – Annual report year: 2012

  187. Published
  188. Published

    Conformation of bovine submaxillary mucin on hydrophobic surface. / Pakkanen, Kirsi I.; Madsen, Jan Busk; Lee, Seunghwan.

    In: European Cells & Materials, Vol. 26, No. Suppl. 6, 2013, p. 51.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2014

  189. Published

    Consumer leather exposure: an unrecognized cause of cobalt sensitization. / Thyssen, J.P.; Johansen, Jeanne D.; Jellesen, Morten Stendahl; Møller, Per; Sloth, Jens Jørgen; Zachariae, Claus; Menne, Torkil.

    In: Contact Dermatitis, Vol. 69, No. 5, 2013, p. 276-279.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  190. Published

    Coordinate Metrology by Traceable Computed Tomography. / Müller, Pavel; De Chiffre, Leonardo (Main supervisor); Hansen, Hans Nørgaard (Supervisor); Cantatore, Angela (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 181 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  191. Published

    Corrosion reliability of electronic devices. / Ambat, Rajan.

    In: Corrosion Engineering, Science and Technology, Vol. 48, No. 6, 2013, p. 408.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2013

  192. Published

    Coupling of theory and practice through inductive learning in experimental fluid mechanics education : A practical study. / Velte, Clara Marika; Andersson, Pernille Hammar; Meyer, Knud Erik.

    Proceedings of 41st SEFI Conference. European Society for Engineering Education, 2013.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  193. Published
  194. Published

    Deciding on PSS: A Framework for PSS Strategies. / Neugebauer, Line Maria; Mougaard, Krestine; Andersen, Jakob Axel Bejbro; McAloone, Tim C.

    Product-Service Integration for Sustainable Solutions. Proceedings of the 5th CIRP International Conference on Industrial Product-Service Systems. ed. / Horst Meier. Springer-Verlag, 2013. p. 299-310 (Lecture Notes in Production Engineering).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  195. Published

    Decomposition studies of no-clean solder flux systems in connection with corrosion reliability of electronics. / Conseil, Helene; Jellesen, Morten Stendahl; Verdingovas, Vadimas; Ambat, Rajan.

    EUROCORR 2013 - European Corrosion Congress. European Federation of Corrosion, 2013. Paper H.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  196. Published

    Den nyeste generation af røntgen diffraktometre med tilhørende temperaturcelle. / Grumsen, Flemming Bjerg (Author).

    2013. Dansk Metallurgisk Selskab.Dansk Metallurgisk Selskabs vintermøde 2013, Kolding, Denmark, 16/01/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  197. Published
  198. Published

    Design and modeling of an advanced marine machinery system including waste heat recovery and removal of sulphur oxides. / Frimann Nielsen, Rasmus; Haglind, Fredrik; Larsen, Ulrik.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  199. Published

    Design and optimisation of organic Rankine cycles for waste heat recovery in marine applications using the principles of natural selection. / Larsen, Ulrik; Pierobon, Leonardo; Haglind, Fredrik; Gabrielii, Cecilia.

    In: Energy, Vol. 55, 2013, p. 803-812.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  200. Published

    Design and Optimization of Gearless Drives using Multi-Physics Approach. / Andersen, Søren Bøgh; Santos, Ilmar (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 251 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  201. Published

    Designing Mechatronic Products - Achieving Integration by Means of Modelling Dependencies. / Torry-Smith, Jonas; Mortensen, Niels Henrik (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 144 p. (DCAMM Report).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  202. Published
  203. Published

    Determination of composition, residual stress and stacking fault depth profiles in expanded austenite with energy-dispersive diffraction. / Jegou, S.; Christiansen, Thomas Lundin; Klaus, M.; Genzel, Ch.; Somers, Marcel A. J.

    In: Thin Solid Films, Vol. 530, 2013, p. 71-76.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  204. Published

    Determination of friction in sheet metal forming by means of simulative tribo-tests. / Ceron, Ermanno; Bay, Niels.

    In: Key Engineering Materials, Vol. 549, 2013, p. 415-422.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  205. Published

    Determining geometrically necessary dislocation densities by EBSD. / Littlewood, Philip (Author).

    2013. Dansk Metallurgisk Selskab.Dansk Metallurgisk Selskabs vintermøde 2013, Kolding, Denmark, 16/01/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  206. Published

    Developing a New Expander. / Wronski, Jorrit; Fredslund, Kristian.

    2013. Poster session presented at International Symposium on Advanced Waste Heat Valorisation Technologies, Kortrijk, Belgium.

    Publication: Research - peer-reviewPoster – Annual report year: 2013

  207. Published

    Development and validation of a reduced combined biodiesel–diesel reaction mechanism. / Ng, Hoon Kiat; Gan, Suyin; Ng, Jo-Han; Pang, Kar Mun.

    In: Fuel, Vol. 104, 2013, p. 620-634.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  208. Published
  209. Published

    Development of durable and efficient electrodes for large-scale alkaline water electrolysis. / Kjartansdóttir, Cecilia Kristin; Nielsen, Lars Pleth; Møller, Per.

    In: International Journal of Hydrogen Energy, Vol. 38, No. 20, 2013, p. 8221-8231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  210. Published

    Dislocation content and alignment of boundaries in a fcc crystal deformed in plane strain. / Winther, Grethe.

    2013. Abstract from International Symposium on Plasticity 2013 and Its Current Applications , Nassau, Bahamas.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  211. Published

    Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium. / Hong, Chuanshi; Huang, Xiaoxu; Winther, Grethe.

    In: Philosophical Magazine (London, 2003), Vol. 93, No. 23, 2013, p. 3118-3141 .

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  212. Published

    Does cobalt spot testing of copper items result in false-positive test reactions?. / Thyssen, Jacob P. ; Johansen, Jeanne D.; Menné, Torkil; Jellesen, Morten Stendahl.

    In: Contact Dermatitis, Vol. 69, 2013, p. 387–388.

    Publication: Research - peer-reviewLetter – Annual report year: 2013

  213. Published

    Drivers and barriers for implementation of environmental strategies in manufacturing companies. / Bey, Niki; Hauschild, Michael Zwicky; McAloone, Tim C.

    In: C I R P Annals, Vol. 62, No. 1, 2013, p. 43-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  214. Published

    “DRYPACK” - a calculation and analysis tool. / Andreasen, M.B.; Toftegaard, R.; Schneider, P.; Kærn, Martin Ryhl; Elmegaard, Brian.

    6th Nordic Drying Conference. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  215. Published

    Dynamic characteristics of an automotive fuel cell system for transitory load changes. / Rabbani, Raja Abid; Rokni, Masoud.

    In: Sustainable Energy Technologies and Assessments, Vol. 1, No. 1, 2013, p. 34-43.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  216. Published

    Dynamic Performance of a PEM Fuel Cell System. / Rabbani, Raja Abid; Rokni, Masoud (Supervisor).

    DTU Mechanical Engineering, 2013. 288 p. (DCAMM Special Report; No. S154).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  217. Published
  218. Published

    Dynamics of Rigid Bodies and Flexible Beam Structures. / Nielsen, Martin Bjerre; Krenk, Steen (Main supervisor).

    DTU Mechanical Engineering, 2013. (DCAMM Special Report; No. S156).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  219. Published

    EAP high-level product architecture. / Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik; Sarban, Rahimullah.

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8687, 2013, p. 868710.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  220. Published

    Ecodesign maturity model: a management framework to support ecodesign implementation into manufacturing companies. / Antelmi Pigosso, Daniela Cristina; Rozenfeld, Henrique ; McAloone, Tim C.

    In: Journal of Cleaner Production, Vol. 59, 2013, p. 160-173.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  221. Published

    EcoM2 web portal: Collecting empirical data and supporting companies' ecodesign implementation and management. / Antelmi Pigosso, Daniela Cristina; McAloone, Tim C.; Rozenfeld, Henrique.

    ICED 2013. International Conference on Engineering Design. Design Society, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  222. Published

    Educating Maritime Engineers for a Globalised Industry. / Nielsen, Ulrik Dam (Author).

    2013. NMU-DNV Workshop, Szczecin, Poland, 24/01/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  223. Published

    Effect of air on water capillary flow in silica nanochannels. / Zambrano, Harvey; Walther, Jens Honore; Oyarzua, Elton.

    In: American Physical Society. Bulletin, Vol. 58, No. 8, Abstract: R6.00005, 2013.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2013

  224. Published

    Effect of nitrogen crossover on purging strategy in PEM fuel cell systems. / Rabbani, Raja Abid; Rokni, Masoud.

    In: Applied Energy, Vol. 111, 2013, p. 1061-1070.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  225. Published
  226. Published

    Effect of the Preheating Temperature on Process Time in Friction Stir Welding of Al 6061-T6. / Jabbari, Masoud.

    In: Journal of Engineering, 2013, p. Article ID 580805.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  227. Published

    Effects from fully nonlinear irregular wave forcing on the fatigue life of an offshore wind turbine and its monopile foundation. / Schløer, Signe; Bredmose, Henrik; Bingham, Harry B.; Larsen, Torben J.

    Proceedings of the ASME 31th 2012 International Conference on Ocean, Offshore and Arctic Engineering. Vol. 7 American Society of Mechanical Engineers, 2013. p. 393-402.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  228. Published

    Effects of holding pressure and process temperatures on the mechanical properties of moulded metallic parts. / Islam, Aminul; Hansen, Hans Nørgaard; Esteves, N.M.; Rasmussen, T.T.

    ANTEC 2013 Conference Proceedings. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  229. Published

    Effects of widening during rolling on the subsequent recrystallization kinetics of copper. / Lin, Fengxiang; Leffers, Torben; Juul Jensen, Dorte; Pantleon, Wolfgang.

    In: Materials Science Forum, Vol. 753, 2013, p. 285-288.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  230. Published

    Efficient computations of wave loads on offshore structures. / Paulsen, Bo Terp; Bingham, Harry B. (Main supervisor); Bredmose, Henrik (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 132 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  231. Published

    Efficient Mooring Line Fatigue Analysis Using a Hybrid Method Time Domain Simulation Scheme. / Christiansen, Niels Hørbye; Voie, Per Erlend Torbergsen; Høgsberg, Jan Becker; Sødahl, Nils.

    ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Vol. 1 American Society of Mechanical Engineers, 2013. OMAE2013-10682.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  232. Published

    Electroplated tin-nickel coatings as a replacement for nickel to eliminate nickel dermatitis. / Møller, Per; Boyce, Jan M.; Nielsen, Lars Pleth.

    National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013). National Association for Surface Finishing, 2013. p. 874-885.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  233. Published

    Energy-release rate and mode mixity of face/core debonds in sandwich beams. / Kardomateas, George A.; Berggreen, Christian; Carlsson, Leif A.

    In: AIAA Journal, Vol. 51, No. 4, 2013, p. 885-892.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  234. Published

    Enhanced carbide precipitation during tempering of sub-zero Celsius treated AISI 52100 bearing steel. / Villa, Matteo; Pantleon, Karen; Somers, Marcel A. J.

    2013. Paper presented at Heat Treat & Surface Engineering Conference & Expo 2013, Chennai, India.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  235. Published

    Entropy generation minimization of one and two-stage tube in tube ammonia evaporators cooling high pressure gaseous hydrogen for vehicle refuelling. / Jensen, Jonas Kjær; Rothuizen, Erasmus Damgaard; Markussen, Wiebke Brix.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and environmental Impact of Energy Systems. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  236. Published

    Equal modal damping design for a family of resonant vibration control formats. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Vibration and Control, Vol. 19, No. 9, 2013, p. 1294-1315.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  237. Published

    Estimating Gear Teeth Stiffness. / Pedersen, Niels Leergaard.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.-A. Mardal; A. Massing. Center for Biomedical Computing, Simula Research Laboratory, 2013. p. 225-228.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  238. Published

    Evaluation and Development of Chemical Kinetic Mechanism Reduction Scheme for Biodiesel and Diesel Fuel Surrogates. / Poon, Hiew Mun; Ng, Hoon Kiat; Gan, Suyin; Pang, Kar Mun; Schramm, Jesper.

    In: S A E International Journal of Fuels and Lubricants, Vol. 6, No. 3, 2013-01-2630, 2013.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  239. Published

    Evaluation of atmospheric corrosion on electroplated zinc and zinc nickel coatings by Electrical Resistance (ER) Monitoring. / Møller, Per.

    National Association for Surface Finishing Annual Conference and Trade Show (SUR/FIN 2013). National Association for Surface Finishing, 2013. p. 583-591.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  240. Published

    Evaluation of Response Prediction Procedures using Full Scale Measurements for a Container Ship. / Andersen, Ingrid Marie Vincent; Jensen, Jørgen Juncher; Nielsen, Ulrik Dam.

    Proceedings of the PRADS 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  241. Published

    Evaluation of the process induced residual stresses at the web-flange junctions of pultruded GFRP profiles. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    Proceedings of the 17th International Conference on Composite Structures (ICCS). 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  242. Published

    Exergetic assessment of energy systems on North Sea oil and gas platforms. / Nguyen, Tuong-Van; Pierobon, Leonardo; Elmegaard, Brian; Haglind, Fredrik; Breuhaus, Peter; Voldsund, Mari.

    In: Energy, Vol. 62, 2013, p. 23-36.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  243. Published

    Exergy analysis of a combined heat and power plant with integrated lignocellulosic ethanol production. / Lythcke-Jørgensen, Christoffer Ernst; Haglind, Fredrik; Clausen, Lasse Røngaard.

    Proceedings of International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  244. Published

    Experimental and numerical analysis of brazed plate heat exchangers for organic fluids. / Bennov, Lars; Wronski, Jorrit; Markussen, Wiebke Brix; Haglind, Fredrik.

    2013. Poster session presented at ASME ORC 2nd International Seminar on ORC Power Systems, Rotterdam, Netherlands.

    Publication: Research - peer-reviewPoster – Annual report year: 2013

  245. Published

    Experimental and numerical study of the micro-mechanical failure in composites. / Ashouri Vajari, Danial; Martyniuk, Karolina; Sørensen, Bent F.; Legarth, Brian Nyvang.

    Proceedings of the 19th International Conference on Composite Materials . 2013. p. 5853-5863.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  246. Published
  247. Published

    Experimental calibration of forward and inverse neural networks for rotary type magnetorheological damper. / Bhowmik, Subrata; Weber, Felix; Høgsberg, Jan Becker.

    In: Structural Engineering and Mechanics, Vol. 46, No. 5, 2013, p. 673-693.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  248. Published

    Experimental investigation of nitrogen based emissions from an ammonia fueled SI-engine. / Westlye, Fredrik Ree; Ivarsson, Anders; Schramm, Jesper.

    In: Fuel, Vol. 111, 2013, p. 239-247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  249. Published

    Experimental quantification of contact forces with impact, friction and uncertainty analysis. / Lahriri, Said; Santos, Ilmar.

    In: Tribology International, Vol. 66, 2013, p. 93-104.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  250. Published
  251. Published

    Experimental Validation of Topology Optimization for RF MEMS Capacitive Switch Design. / Philippine, Mandy Axelle; Zareie, Hosein; Sigmund, Ole; Rebeiz, Gabriel M.; Kenny, Thomas W.

    In: I E E E Journal of Microelectromechanical Systems, Vol. 22, No. 6, 2013, p. 1296-1309.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  252. Published

    Explicit fourth-order stiffness representation in non-linear dynamics. / Krenk, Steen.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. Center for Biomedical Computing, Simula Research Laboratory, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  253. Published

    Extending product modeling methods for integrated product development. / Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný; Hvam, Lars.

    2013. Paper presented at 19th International Conference on Engineering Design, Seoul, Korea, Republic of.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  254. Published

    Extensional rheology of entangled polystyrene solutions suggests importance of nematic interactions. / Huang, Qian; Javier Alvarez, Nicolas; Matsumiya, Yumi ; Rasmussen, Henrik K.; Watanabe, Hiroshi ; Hassager, Ole.

    2013. Abstract from The Society of Rheology 85th Annual Meeting, Montreal, Canada.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  255. Published

    Extensional Rheology of Entangled Polystyrene Solutions Suggests Importance of Nematic Interactions. / Huang, Qian; Javier Alvarez, Nicolas; Matsumiya, Yumi; Rasmussen, Henrik K.; Watanabe, Hiroshi; Hassager, Ole.

    In: A C S Macro Letters, Vol. 2, 2013, p. 741-744.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  256. Published

    Fabrication and characterization of porous-core honeycomb bandgap THz fibers. / Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    2013. Abstract from International Workshop on Optical Terahertz Science and Technology (OTST 2013), Kyoto Terrsa, Japan.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  257. Published

    Feasibility of bovine submaxillary mucin (BSM) films as biomimetic coating for polymeric biomaterials. / Lee, Seunghwan; Madsen, Jan Busk; Pakkanen, Kirsi I.

    Proceedings of the IASTED International Conference on Biomedical Engineering, BioMed 2013. 2013. p. 591-597.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  258. Published

    Final report on RMO key comparison EURAMET.L-K6: CMM 2-D artifact: ball plate. / Jusko, O.; Banreti, E.; Bergmans, R.; De Chiffre, Leonardo; Lassila, A.; Lewis, A.; Ramotowski, Z.; Saraiva, F.; Thalmann, R; Turner, P; Zeleny, V.

    In: Metrologia, Vol. 50, No. 1A, 2013, p. 04001.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  259. Published

    Flow and bed shear stresses in scour protections around a pile in a current. / Nielsen, Anders Wedel; Liu, Xiaofeng; Sumer, B. Mutlu; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 72, 2013, p. 20-38.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  260. Published

    Formation of geometrically necessary boundaries – Crystal plasticity & DD simulations. / Winther, Grethe; Devincre, Benoit .

    2013. Abstract from International Symposium on Plasticity 2013 and Its Current Applications , Nassau, Bahamas.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  261. Published

    Forming a method mindset: The role of knowledge and preference in facilitating heuristic method usage in design. / Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin.

    Proceedings of the 15th International Conference on Engineering and Product Design Education: Design Education - Growing Our Future (EPDE 2013). Design Society, 2013. p. 196-201.

    Publication: ResearchBook chapter – Annual report year: 2014

  262. Published

    Forming of shape memory composite structures. / Santo, Loredana; Quadrini, Fabrizio; De Chiffre, Leonardo.

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 1930-1937.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  263. Published

    Fracture of anisotropic materials with plastic strain-gradient effects. / Legarth, Brian Nyvang.

    Proceedings - 13th International Conference on Fracture. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  264. Published

    Fully Coupled Three-Dimensional Dynamic Response of a TLP Floating Wind Turbine in Waves and Wind. / Ramachandran, Gireesh Kumar V.R.; Bredmose, Henrik; Sørensen, Jens Nørkær; Jensen, Jørgen Juncher.

    Proceedings of the ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering. Vol. 7 American Society of Mechanical Engineers, 2013. p. 299-308 Paper OMAE2012-82271.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  265. Published

    Fuzzy Decision Support for Tools Selection in the Core Front End Activities of New Product Development. / Achiche, S.; Appio, F.P.; McAloone, Tim C.; Minin, A. Di.

    In: Research in Engineering Design, Vol. 24, 2013, p. 1-18.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  266. Published

    Grain Boundary Engineering of Electrodeposited Thin Films. / Alimadadi, Hossein; Somers, Marcel A. J. (Supervisor); Pantleon, Karen (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 275 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  267. Published

    Growth of mussels Mytilus edulis at algal (Rhodomonas salina) concentrations below and above saturation level for reduced filtration rate. / Riisgård, Hans Ulrik; Pleissner, Daniel ; Larsen, Poul Scheel; Lundgreen, Kim.

    In: Marine Biology Research, Vol. 9, No. 10, 2013, p. 1005-1017.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  268. Published

    Growth of Vanadium Carbide by Halide-Activated Pack Diffusion. / Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Dahl, Kristian Vinter; Somers, Marcel A. J.

    2013. Paper presented at Heat Treat & Surface Engineering Conference & Expo 2013, Chennai, India.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  269. Published

    Guidelines for the Deployment of Product-Related Environmental Legislation into Requirements for the Product Development Process. / Ferraz, Mariana; Antelmi Pigosso, Daniela Cristina; Teixeira, Cláudia Echevenguá ; Rozenfeld, Henrique .

    Proceedings of EcoDesign 2013 International Symposium. Korea National Cleaner Production Center, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  270. Published

    Handbook of LDS MID. / Islam, Aminul; Risager, Flemming.

    Sonion, 2013. 34 p.

    Publication: ResearchReport – Annual report year: 2013

  271. Published

    Handbook of Plastic Welding. / Islam, Aminul.

    Sonion, 2013. 70 p.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  272. Published

    Heat pumps in district heating networks. / Ommen, Torben Schmidt; Markussen, Wiebke Brix; Elmegaard, Brian.

    2013. Paper presented at 2nd Symposium on Advances in Refrigeration and Heat Pump Technology, Odense, Denmark.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  273. Published

    Heat Transfer in Large Two-Stroke Marine Diesel Engines. / Jensen, Michael Vincent; Walther, Jens Honore (Supervisor); Carlsen, Henrik (Supervisor); Schramm, Jesper (Supervisor).

    DTU Mechanical Engineering, 2013. 196 p. (DCAMM Special Report; No. S157).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  274. Published

    Highly photosensitive polymethyl methacrylate microstructured polymer optical fiber with doped core. / Sáez-Rodríguez, D.; Nielsen, Kristian; Rasmussen, Henrik K.; Bang, Ole; Webb, D. J.

    In: Optics Letters, Vol. 38, No. 19, 2013, p. 3769-3772.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  275. Published

    High-Tg TOPAS mPOF strain sensing at 110 degrees. / Nielsen, Kristian; Markos, Christos; Stefani, Alessio ; Yuan, Wei; Bang, Ole; Rasmussen, Henrik K.

    Proceedings of 22nd International Conference on Plastical Optical Fibers (POF 2013). Laboratorio Instrumentacao & Fotonica (LIF), 2013. p. 298-301.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  276. Published
  277. Published

    HTPro: Low-temperature Surface Hardening of Stainless Steel. / Christiansen, Thomas Lundin; Somers, Marcel A. J.

    In: Advanced Materials & Processes, No. November-December, 2013, p. 52-53.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  278. Published

    Hull Girder Fatigue Damage Estimations of a Large Container Vessel by Spectral Analysis. / Andersen, Ingrid Marie Vincent; Jensen, Jørgen Juncher.

    Proceedings of the PRADS 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  279. Published

    Hybrid Heat Pump Solutions for Industrial Energy Savings. / Jensen, Jonas Kjær (Author).

    2013. DTU International Energy Conference 2013, Lyngby, Denmark, 10/09/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  280. Published

    Hybrid morphological modelling of shoreline response to a detached breakwater. / Kristensen, Sten Esbjørn; Drønen, Nils; Deigaard, Rolf; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 71, 2013, p. 13-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  281. Published

    Hybrid-Spectral Model for Fully Nonlinear Numerical Wave Tank. / Christiansen, Torben Robert Bilgrav; Engsig-Karup, Allan Peter; Bingham, Harry B.

    Proceedings of the 28th International Workshop on Water Waves and Floating Bodies. 2013. p. 37-40.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  282. Published

    Hybrid Testing of Composite Structures with Single-Axis Control. / Waldbjørn, Jacob Paamand; Høgh, Jacob Herold; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 19th International Conference on Composite Materials. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  283. Published

    Identification of a reusable requirements structure for embedded products in a dynamic market environment. / Hauksdóttir, Dagný; Mortensen, Niels Henrik; Nielsen, Poul Erik.

    In: Computers in Industry, Vol. 64, 2013, p. 351-362.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  284. Published

    Identification of Precipitates in an IN792 Gas Turbine Blade after Service Exposure. / Dahl, Kristian Vinter; Hald, John.

    In: Praktische Metallographie, Vol. 50, No. 6, 2013, p. 432-450.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  285. Published

    Impact of hygroscopicity and composition of solder flux residue on the reliability of PCBA under corrosive conditions. / Verdingovas, Vadimas; Jellesen, Morten Stendahl; Rizzo, Riccardo ; Conseil, Helene; Ambat, Rajan.

    Proceedings of EUROCORR 2013. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  286. Published

    Implementation and applications of a finite-element model for the contact between rough surfaces. / Poulios, Konstantinos; Klit, Peder.

    In: Wear, Vol. 303, No. 1-2, 2013, p. 1-8.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  287. Published

    Improved switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    In: Optics Letters, Vol. 38, No. 14, 2013, p. 2466-2468.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  288. Published

    Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication. / Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  289. Published

    Improving nanocavity switching using Fano resonances in photonic crystal structures. / Heuck, Mikkel; Kristensen, Philip Trøst; Elesin, Yuriy; Mørk, Jesper.

    2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2013. p. MI1-7.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  290. Published

    Improving the accuracy of micro injection moulding process simulations. / Marhöfer, David Maximilian; Tosello, Guido; Islam, Aminul; Hansen, Hans Nørgaard.

    2013. Abstract from EUSPEN Micro/Nano Manufacturing Workshop, Karlsruhe, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  291. Published

    Improving the requirements process in Axiomatic Design Theory. / Thompson, Mary Kathryn.

    In: C I R P Annals, Vol. 62, No. 1, 2013, p. 115-118.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  292. Published

    Improving Topology Optimization using Games. / Nobel-Jørgensen, Morten; Christiansen, Asger Nyman; Bærentzen, J. Andreas; Aage, Niels; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  293. Published

    Industry specific PSS: A study of opportunities and barriers for maritime suppliers. / Andersen, Jakob Axel Bejbro; McAloone, Tim C.; Garcia i Mateu, Adrià.

    ICED 2013. International Conference on Engineering Design. Design Society, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  294. Published

    Influence of grain size in the near-micrometre regime on the deformation microstructure in aluminium. / Le, G.M.; Godfrey, A.; Hansen, Niels; Liu, W.; Winther, Grethe; Huang, Xiaoxu.

    In: Acta Materialia, Vol. 61, No. 19, 2013, p. 7072-7086.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  295. Published

    Influence of process parameters on edge replication quality of lab-on-a-chip micro fluidic systems geometries. / Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard; Nørregaard, J.

    ANTEC 2013 Conference Proceedings. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  296. Published
  297. Published

    Initial verification of an induction heating set-up for injection molding. / Menotti, Stefano; Hansen, Hans Nørgaard; Bissacco, Giuliano; Tang, Peter T.; Ravn, Christian.

    ANTEC 2013 Conference Proceedings. 2013. p. 1485-1489.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  298. Published

    Injection moulding of large structured area with functional geometries in the sub-100 nanometer meter range. / Calaon, Matteo; Tosello, Guido; Tang, P.T.; Nørregaard, J.; Garnaes, J.; Li, W.; Hansen, Hans Nørgaard.

    Proceedings of the Polymer Processing Society 29th Annual Meeting. Polymer Processing Society, 2013. p. 1.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  299. Published

    Innovative multi-purpose offshore platforms : Planning, design and operation. / Claus, Simon; Seys, Jan; Pirlet, Hans; Mees, Jan; Christensen, Erik Damgaard; Zanittigh, Barbara.

    2013. Abstract from LITTORAL 2012, Oostende, Belgium.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  300. Published
  301. Published

    In situ corrosion testing of various nickel alloys at Måbjerg waste incineration plant. / Montgomery, Melanie; Hansson, A. N.; Jensen, S. A.; Vilhelmsen, T.; Nielsen, N. H.

    In: Materials and Corrosion, Vol. 64, No. 1, 2013, p. 14-25.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  302. Published

    In-situ investigation of martensite formation in AISI 52100 bearing steel at sub-zero Celsius temperature. / Villa, Matteo; Hansen, Mikkel Fougt; Pantleon, Karen; Somers, Marcel A. J.

    Proceedings of the 2nd Mediterranean Conference on Heat Treatment and Surface Engineering. Croatian Society for Heat Treatment and Surface Engineering, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  303. Published

    In situ investigation of the martensitic transformation in Fe–12 wt.%Ni–0.6 wt.%C steel at subzero temperatures. / Villa, Matteo; Pantleon, Karen; Somers, Marcel A. J.

    In: Journal of Alloys and Compounds, Vol. 577, No. Supplement 1, 2013, p. S543-S548.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  304. Published

    In Situ Observation of the Dislocation Structure Evolution During a Strain Path Change in Copper. / Wejdemann, Christian; Poulsen, Henning Friis; Lienert, Ulrich; Pantleon, Wolfgang.

    In: J O M, Vol. 65, No. 1, 2013, p. 35-43.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  305. Published

    Integration of a municipal solid waste gasification plant with solid oxide fuel cell and gas turbine. / Bellomare, Filippo; Rokni, Masoud.

    In: Renewable Energy, Vol. 55, 2013, p. 490-500.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  306. Published

    Integration of Heat Pumps and Cogeneration in the Future Energy System. / Ommen, Torben Schmidt (Author).

    2013. DTU International Energy Conference 2013, Lyngby, Denmark, 10/09/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  307. Published

    Interactive topology optimization on hand-held devices. / Aage, Niels; Nobel-Jørgensen, Morten; Andreasen, Casper Schousboe; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  308. Published

    Interface Behavior in Functionally Graded Ceramics for the Magnetic Refrigeration: Numerical Modeling. / Jabbari, Masoud; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Applied Mechanics and Materials, Vol. 325-326, 2013, p. 1362-1367.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  309. Published

    Interface fatigue crack propagation in sandwich X-joints – Part I: Experiments. / Moslemian, Ramin; Berggreen, Christian.

    In: Journal of Sandwich Structures and Materials, Vol. 15, No. 4, 2013, p. 429-450.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  310. Published

    Interface fatigue crack propagation in sandwich X-joints – Part II: Finite element modeling. / Moslemian, Ramin; Berggreen, Christian.

    In: Journal of Sandwich Structures and Materials, Vol. 15, No. 4, 2013, p. 451-463.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  311. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. Final Report. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2013. 75 p. (CIA-CT Final Report; No. 01).

    Publication: ResearchReport – Annual report year: 2013

  312. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. Reference Measurements. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo; Larsen, Erik; Rasmussen, Jakob; Sobiecki, Rene.

    DTU Mechanical Engineering, 2013. 86 p. (CIA-CT Reference Measurements; No. 01).

    Publication: ResearchReport – Annual report year: 2013

  313. Published

    Investigating SO3 Formation from the Combustion of Heavy Fuel Oil in a Four-Stroke Medium Speed Test Engine. / Cordtz, Rasmus Lage; Schramm, Jesper; Rabe, Rom.

    In: Energy & Fuels, Vol. 27, No. 10, 2013, p. 6279–6286.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  314. Published
  315. Published

    Investigation of the Thermostability of Bovine Submaxillary Mucin (BSM) and its Impact on Lubrication. / Madsen, Jan Busk; Pakkanen, Kirsi I.; Lee, Seunghwan; Yang Dan.

    In: APCBEE Procedia, Vol. 7, 2013, p. 21-26.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  316. Published
  317. Published

    Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron. / Moumeni, Elham; Stefanescu, Doru Michael; Tiedje, Niels Skat; Larrañaga, Pello; Hattel, Jesper Henri.

    In: Metallurgical and Materials Transactions A, Vol. 44, No. 11, 2013, p. 5134-5146.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  318. Published

    Isotope exchange investigation of nitrogen redistribution in expanded austenite. / Christiansen, Thomas Lundin; Drouet, M.; Martinavičius, A.; Somers, Marcel A. J.

    In: Scripta Materialia, Vol. 69, No. 8, 2013, p. 582-585.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  319. Published

    Joining by plastic deformation. / Mori, Ken-ichiro ; Bay, Niels; Fratini, Livan ; Micari, Fabrizio; Tekkaya, A. Erman.

    In: CIRP Annals - Manufacturing Technology, Vol. 62, 2013, p. 673–694.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  320. Published

    Kinetics of Z-Phase Precipitation in 9 to 12 pct Cr Steels. / Danielsen, Hilmar Kjartansson; Nunzio, Paolo Emilio di; Hald, John.

    In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 44, No. 5, 2013, p. 2445-2452.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  321. Published
  322. Published

    Length-scale effect due to periodic variation of geometrically necessary dislocation densities. / Oztop, M. S.; Niordson, Christian Frithiof; Kysar, J. W.

    In: International Journal of Plasticity, Vol. 41, 2013, p. 189-201.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  323. Published

    Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material. / Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders; Izui, Kazuhiro; Nishiwaki, Shinji; Kogiso, Nozomu.

    In: I E E E Transactions on Magnetics, Vol. 49, No. 5, 2013, p. 2081-2084.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  324. E-pub ahead of print
  325. Published

    Loads and response from steep and breaking waves on monopiles. / Bredmose, Henrik (Author); Schløer, Signe (Author); Sahlberg-Nielsen, Lasse (Author); Slabiak, Peter (Author); Larsen, Torben J. (Author); Kim, Taessong (Author); Paulsen, Bo Terp (Author); Bingham, Harry B. (Author); Jacobsen, Niels Gjøl (Author); Tornfeldt Sørensen, Jacob (Author); Schlütter, Flemming (Author); Nielsen, Anders Wedel (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  326. Published

    Low Temperature Gaseous Nitriding of a Stainless Steel Containing Strong Nitride Formers. / Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Somers, Marcel A. J.

    2013. Paper presented at Heat Treat & Surface Engineering Conference & Expo 2013, Chennai, India.

    Publication: ResearchPaper – Annual report year: 2013

  327. Published

    Macromechanical parametric amplification. / Neumeyer, Stefan; Thomsen, Jon Juel.

    2013. Poster session presented at DCAMM 14th internal Symposium, Nyborg, Denmark.

    Publication: ResearchPoster – Annual report year: 2013

  328. Published

    Macromechanical parametric amplification with a base-excited doubly clamped beam. / Neumeyer, Stefan; Thomsen, Jon Juel.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  329. Published

    Manufacturing involving forging of multiple objects in contact. / Nielsen, Chris Valentin; Zhang, W.; Martins, P.A.F.; Bay, Niels.

    2013. Paper presented at 6th International Seminar on Precision Forging, Kyoto, Japan.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  330. Published
  331. Published
  332. Published
  333. Published

    Maritime Branch Analysis: A workbook in the PROTEUS series. / Mougaard, Krestine; Neugebauer, Line Maria; Garcia i Mateu, Adrià; Andersen, Jakob Axel Bejbro; McAloone, Tim C.; Hsuan, Juliana; Ahm, Thorkild .

    Technical University of Denmark (DTU), 2013. 87 p. (PROTEUS Workbook series; No. PRO-01).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  334. Published

    Materialer, overflade- og procesteknologi. / Alsted Rasmussen, Anette ; Somers, Marcel A. J.; Pihl, Niels Henrik ; Ottosen, Niels ; Thy, Charlotte; Kristensen, Gert K. ; Brandt Sørensen, Torben .

    Rengøring på slagterier og mejerier i Danmark: Udvikling af fremtidens effektive, ressourcebesparende teknologier. Kgs. Lyngby : Danmarks Tekniske Universitet (DTU), 2013. p. 30-37.

    Publication: ResearchReport chapter – Annual report year: 2013

  335. Published

    Material size effects on crack growth along patterned wafer-level Cu–Cu bonds. / Tvergaard, Viggo; Niordson, Christian Frithiof; Hutchinson, John W.

    In: International Journal of Mechanical Sciences, Vol. 68, 2013, p. 270-276.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  336. Published

    Measurement of the rotor wake using PIV on a scaled turbine rotor in a water flume. / Mikkelsen, Robert Flemming (Author); Okulov, Valery (Author); Meyer, Knud Erik (Author); Naumov, Igor (Author); Karbardin, I. (Author); Sørensen, Jens Nørkær (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  337. Published

    Measuring Sandy Bottom Dynamics by Exploiting Depth from Stereo Video Sequences. / Musumeci, Rosaria E.; Farinella, Giovanni M.; Foti, Enrico; Battiato, Sebastiano; Petersen, Thor Ugelvig; Sumer, B. Mutlu.

    Image Analysis and Processing – ICIAP 2013. Vol. 8156 Springer, 2013. p. 420-430 (Lecture Notes in Computer Science, Vol. 8156).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  338. Published

    Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery. / Cerda Varela, Alejandro Javier; Santos, Ilmar (Main supervisor).

    Kgs. Lynby : Technical University of Denmark, 2013. 206 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  339. Published
  340. Published
  341. Published

    Mind-sets of functional reasoning in engineering design. / Howard, Thomas J.; Andreasen, Mogens Myrup.

    In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 27, No. 3, 2013, p. 233-240.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  342. Published

    Modeling constitutive and micro-scale frictional behavior of PTFE. / Sonne, Mads Rostgaard; Nørregaard, J.; Hattel, Jesper Henri.

    2013. Abstract from European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, Spain.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  343. Published

    Modeling of a regenerative indirect evaporative cooler for a desiccant cooling system. / Bellemo, Lorenzo; Elmegaard, Brian; Reinholdt, Lars O. ; Kærn, Martin Ryhl.

    2013. Paper presented at 4th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Delft, Netherlands.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  344. Published
  345. Published

    Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography. / Sonne, Mads Rostgaard; Hattel, Jesper Henri.

    In: Microelectronic Engineering, Vol. 106, 2013, p. 1-8.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  346. Published

    Modeling the Distribution of Sulfur Compounds in a Large Two Stroke Diesel Engine. / Cordtz, Rasmus Lage; Schramm, Jesper; Andreasen, Anders; Eskildsen, Svend S.; Mayer, Stefan.

    In: Energy & Fuels, Vol. 27, No. 3, 2013, p. 1652–1660.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  347. Published

    Modeling the mechanical deformation of nickel foils for nanoimprint lithography on double-curved surfaces. / Sonne, Mads Rostgaard; Cech, Jiri; Hattel, Jesper Henri; Taboryski, Rafael J.

    Proceedings of International Conference on Advanced Manufacturing Engineering and Technologies (NEWTECH 2013). Kungl. Tekniska högskolan I Stockholm, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  348. Published

    Modeling the mechanical deformation of PTFE flexible stamps for nanoimprint lithography on double-curved surfaces. / Sonne, Mads Rostgaard; Smistrup, K.; Nørregaard, J.; Hattel, Jesper Henri.

    2013. Abstract from 12th International Conference on Nanoimprint & Nanoprint Technology, Barcelona, Spain.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  349. Published

    Modelling and analysis of a desiccant cooling system using the regenerative indirect evaporative cooling process. / Bellemo, Lorenzo; Elmegaard, Brian; Reinholdt, Lars O.; Kærn, Martin Ryhl; Jakobsen, Arne; Markussen, Wiebke Brix.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  350. Published

    Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy. / Tiedje, Niels Skat; Hattel, Jesper Henri; Taylor, John A.; Easton, Mark A.

    In: Materials Science Forum, Vol. 765, 2013, p. 160-164.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  351. Published

    Modelling of a small scale reciprocating ORC expander for cogeneration applications. / Wronski, Jorrit; Oudkerk, Jean-Francois ; Haglind, Fredrik.

    2013. Abstract from ASME ORC 2nd International Seminar on ORC Power Systems, Rotterdam, Netherlands.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  352. Published

    Modelling of Damage During Hot Forging of Ingots. / Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels; Martins, Paolo A.F.

    STEELSIM 2013 - The 5th International Conference. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  353. Published

    Multibody drivetrain model used for predicting gear tooth stresses in a planetary gearbox. / Jørgensen, Martin Felix (Author).

    2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  354. Published

    Multibody Model for Planetary Gearbox of 500 kW Wind Turbine. / Jørgensen, Martin Felix (Author).

    2013. DCAMM 14th internal Symposium, Nyborg, Denmark, 13/03/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  355. Published

    Multibody motion in implicitly constrained director format with links via explicit constraints. / Nielsen, Martin Bjerre; Krenk, Steen.

    Proceedings - ECCOMAS Multibody Dynamics 2013. 2013. p. 231-240.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  356. Published

    Multi-Criteria Optimization in Friction Stir Welding Using a Thermal Model with Prescribed Material Flow. / Tutum, Cem Celal; Deb, Kalyanmoy; Hattel, Jesper Henri.

    In: Materials & Manufacturing Processes, Vol. 28, No. 7, 2013, p. 816-822.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  357. Published
  358. Published

    Multi-objective optimization of small scale organic Rankine cycles for domestic solar applications. / Barbazza, Luca; Pierobon, Leonardo; Haglind, Fredrik; Mirandola, Alberto.

    8th Conference on Sustainable Development of Energy, Water, and Environment System. 2013.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  359. Published

    Multiscale Simulation of Breaking Wave Impacts. / Lindberg, Ole; Engsig-Karup, Allan Peter (Supervisor); Walther, Jens Honore (Supervisor); Bingham, Harry B. (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 125 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  360. Published

    Nanopatterning of Polymer Replication Tools. / Cech, Jiri; Sonne, Mads Rostgaard; Pranov, H; Kofod, G; Matschuk, M; Murthy, S; Lam, Y. C.; Hattel, Jesper Henri; Taboryski, Rafael J.

    2013. Poster session presented at Pittcon 2013, Philadelphia, PA, United States.

    Publication: Research - peer-reviewPoster – Annual report year: 2013

  361. Published

    Nanoscale surface potential imaging of the photocatalytic TiO2 films on aluminum. / Daviðsdóttir, Svava; Dirscherl, Kai; Canulescu, Stela; Shabadi, Rajashekhara; Ambat, Rajan.

    In: R S C Advances, Vol. 3, No. 45, 2013, p. 23296-23302.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  362. Published

    New Tribo-systems for Cold Forming of Steel, Stainless Steel and Aluminium Alloys. / Bay, Niels (Invited author).

    Proceedings of 46th International Cold Forging Group (ICFG) Plenary Meeting . International Cold Forging Group, 2013. 7-04.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  363. Published

    Nitriding and Nitrocarburizing; Current Status and Future Challenges. / Somers, Marcel A. J.

    2013. Paper presented at Heat Treat & Surface Engineering Conference & Expo 2013, Chennai, India.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  364. Published

    Novel electrochemical approach to study corrosion mechanism of Al-Au wire-bond pad interconnections. / Elisseeva, O. V.; Bruhn, A.; Cerezo, J.; Mavinkurve, A.; Rongen, R. T. H.; O'Halloran, G. M.; Ambat, Rajan; Terryn, H.; Mol, J. M. C.

    In: Corrosion Engineering, Science and Technology, Vol. 48, No. 6, 2013, p. 409-417.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  365. Published

    Numerical analysis of jet impingement heat transfer at high jet Reynolds number and large temperature difference. / Jensen, Michael Vincent; Walther, Jens Honore.

    In: Heat Transfer Engineering, Vol. 34, No. 10, 2013, p. 801-809.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  366. Published

    Numerical and experimental investigation of flow and scour around a half-buried sphere. / Dixen, Martin; Sumer, B. Mutlu; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 73, 2013, p. 84-105.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  367. Published

    Numerical and semi-analytical modelling of the process induced distortions in pultrusion. / Baran, Ismet; Carlone, P.; Hattel, Jesper Henri; Palazzo, G.S.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 161-168.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  368. Published

    Numerical Investigation of the Scavenging Process in Marine Two-Stroke Diesel Engines. / Andersen, Fredrik Herland; Hult, Johan; Nogenmyr, Karl-Johan ; Mayer, Stefan .

    Technical papers presented at the SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting. Society of Automotive Engineers, Incorporated, 2013. (S A E Technical Papers; No. 2013-01-2647).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  369. Published

    Numerical modeling of coupled heat transfer and phase transformation for solidification of the gray cast iron. / Jabbari, Masoud; Hosseinzadeh, Azin.

    In: Computational Materials Science, Vol. 68, 2013, p. 160-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  370. Published

    Numerical modeling of magnetic induction and heating in injection molding tools. / Guerrier, Patrick; Hattel, Jesper Henri.

    Proceedings of International Conference on Advanced Manufacturing Engineering and Technologies (NEWTECH 2013). Kungl. Tekniska högskolan I Stockholm, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  371. Published

    Numerical modeling of shoreline undulations part 1: Constant wave climate. / Kærgaard, Kasper Hauberg; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 75, 2013, p. 64-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  372. Published

    Numerical modeling of shoreline undulations part 2: Varying wave climate and comparison with observations. / Kærgaard, Kasper Hauberg; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 75, 2013, p. 77-90.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  373. Published

    Numerical Modeling of the Side Flow in Tape Casting of a Non-Newtonian Fluid. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: American Ceramic Society. Journal, Vol. 96, No. 5, 2013, p. 1414–1420.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  374. Published

    Numerical optimization of die geometry in open die forging. / Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels; Martins, Paulo A.F. .

    Proceedings of International Conference on Advanced Manufacturing Engineering and Technologies (NEWTECH 2013). Kungl. Tekniska högskolan I Stockholm, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  375. Published

    Numerical simulations of viscoelastic flows with free surfaces. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    21ème Congrès Français de Mécanique. Congrès Français de Mécanique, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  376. Published

    Numerical simulations on a twin-plate wake. / Fernández-Gámiz, U.; Velte, Clara Marika; Egusquiza, E.

    Proceedings of the 5th International Congress of Energy and Environment Engineering and Management (CIIEM). 2013.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  377. Published

    Observations on Mode I ductile tearing in sheet metals. / El-Naaman, Salim Abdallah; Nielsen, Kim Lau.

    In: European Journal of Mechanics A - Solids, Vol. 42, 2013, p. 54-62.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  378. Published

    Observed benefits from product configuration systems. / Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik; Thuesen, Christian.

    In: International Journal of Industrial Engineering (Online), Vol. 20, No. 5-6, 2013, p. 329-338.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  379. Published

    Off‐line testing af friktion og smøring i pladeformgivning. / Bay, Niels (Author); Ceron, Ermanno (Author).

    2013. Dansk Metallurgisk Selskab.Dansk Metallurgisk Selskabs vintermøde 2013, Kolding, Denmark, 16/01/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  380. Published

    Off-line testing of alternative of industrial lubricants and different tool materials for cold rolling of stainless steel. / Tahir, Mohammed; Jonsson, Nils-Göran ; Lagergren, Jonas; Ceron, Ermanno.

    2013. Paper presented at 9th international and 6th European Rolling Conference, Venice, Italy.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  381. Published

    On modeling of geometrically necessary dislocation densities in plastically deformed single crystals. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    Proceedings of the 19th International Symposium on Plasticity & Its Current Applications 2013. NEAT Press, 2013. p. 22-24.

    Publication: ResearchArticle in proceedings – Annual report year: 2013

  382. E-pub ahead of print

    On multigrid-CG for efficient topology optimization. / Amir, Oded; Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  383. Published

    On strength design using free material subjected to multiple load cases. / Pedersen, Pauli; Pedersen, Niels Leergaard.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 1, 2013, p. 7-17.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  384. E-pub ahead of print

    On the consistency of adjoint sensitivity analysis for structural optimization of linear dynamic problems. / Jensen, Jakob Søndergaard; Nakshatrala, Praveen B.; Tortorelli, Daniel A.

    In: Structural and Multidisciplinary Optimization, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  385. Published

    On the similarities between micro/nano lithography and topology optimization projection methods. / Jansen, Miche ; Lazarov, Boyan Stefanov; Schevenels, Mattias ; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 48, No. 4, 2013, p. 717-730.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  386. Published

    Open die forging of large shafts with porosity defects – physical and numerical modelling. / Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels; Alves, Luis M. ; Martins, Paulo A. F. .

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 2145-2155.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  387. Published

    Optical fibres used in costumes. / Heimdal, Elisabeth Jacobsen.

    Discover the Movements - Added Value Through Dance. ed. / Ingrid Kristensen. Ingrid Kristensen & Co., 2013. p. 14-15.

    Publication: CommunicationBook chapter – Annual report year: 2013

  388. Published

    Optimization of Bolt Stress. / Pedersen, Niels Leergaard.

    Proceedings - 10th World Congress on Structural and Multidisciplinary Optimization. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  389. Published

    Optimization of bolt thread stress concentrations. / Pedersen, Niels Leergaard.

    In: Archive of Applied Mechanics, Vol. 83, No. 1, 2013, p. 1-14.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  390. Published

    Optimization of extraordinary optical absorption in plasmonic and dielectric structures. / Dühring, Maria Bayard; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 30, No. 5, 2013, p. 1154-1160.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  391. Published

    Optimization of Grooved Micromixer for Microengineering Technologies. / Sabotin, I.; Tristo, G.; Bissacco, Giuliano; Valentincic, J.

    In: Informacije MIDEM, Vol. 43, No. PART 1, 2013, p. 3-13.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  392. Published

    Optimization of hydrogen vehicle refueling via dynamic simulation. / Rothuizen, Erasmus Damgaard; Mérida, W.; Rokni, Masoud; Wistoft-Ibsen, M.

    In: International Journal of Hydrogen Energy, Vol. 38, No. 11, 2013, p. 4221-4231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  393. Published

    Optimization of nonlinear structural vibrations using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  394. Published

    Optimization of Organic Rankine Cycles for Off-Shore Applications. / Pierobon, Leonardo; Larsen, Ulrik; Nguyen, Tuong-Van; Haglind, Fredrik.

    Proceedings of ASME Turbo Expo 2013. Vol. 5B American Society of Mechanical Engineers, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  395. Published

    Optimization of the Thermosetting Pultrusion Process by Using Hybrid and Mixed Integer Genetic Algorithms. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Applied Composite Materials, Vol. 20, No. 4, 2013, p. 449-463.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  396. Published

    Optimum Rotation Speed for the Friction Stir Welding of Pure Copper. / Jabbari, Masoud; Tutum, C.

    In: I S R N Materials Science, Vol. 2013, 978031, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  397. Published

    Overall bolt stress optimization. / Pedersen, Niels Leergaard.

    In: Journal of Strain Analysis for Engineering Design, Vol. 48, No. 3, 2013, p. 155-165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  398. Published

    Overcoming design fixation through education and creativity methods. / Howard, Thomas J.; Maier, Anja; Onarheim, Balder; Friis-Olivarius, Morten.

    ICED 2013. International Conference on Engineering Design. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  399. Published

    Parallel framework for topology optimization using the method of moving asymptotes. / Aage, Niels; Lazarov, Boyan Stefanov.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 4, 2013, p. 493-505.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  400. Published
  401. Published

    Part-load performance of a combined gas turbine - organic Rankine cycle for off-shore applications. / Pierobon, Leonardo; Larsen, Ulrik; Haglind, Fredrik.

    2013. Abstract from ASME ORC 2nd International Seminar on ORC Power Systems, Rotterdam, Netherlands.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  402. Published

    Perfectly Matched Layer (PML) for Transient Wave Propagation in a Moving Frame of Reference. / Madsen, Stine Skov; Krenk, Steen; Hededal, Ole.

    Proceedings of the 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  403. Published

    Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding. / Jauregui-Becker, Juan M.; Tosello, Guido; van Houten, Fred J.A.M.; Hansen, Hans Nørgaard.

    In: Procedia CIRP, Vol. 7, 2013, p. 270-275.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  404. Published

    Performance indicators for evaluation of North Sea oil and gas platforms. / Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian; Ertesvåg, Ivar Ståle; Røsjorde, Audun; He, Wei; Kjelstrup, Signe.

    Proceedings of ECOS 2013 - The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2013. Chinese Society of Engineering Thermophysics, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  405. Published

    Performance simulation and analysis of a fuel cell/battery hybrid forklift truck. / Hosseinzadeh, Elham; Rokni, Masoud; Advani, Suresh G.; Prasad, Ajay K.

    In: International Journal of Hydrogen Energy, Vol. 38, No. 11, 2013, p. 4241-4249.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  406. Published

    Personal Control Over Heating, Cooling and Ventilation : results of a workshop at Clima 2013 conference. / Boerstra, Atze; Simone, Angela.

    In: REHVA Journal, Vol. 50, No. 5, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  407. Published

    Petri Varsta’s Professional Activities – Observed by a colleague. / Pedersen, Preben Terndrup.

    Petri Varsta Akateeminen Laivanrakentaja. Aalto-Yliopisto, 2013. p. 128-135.

    Publication: CommunicationBook chapter – Annual report year: 2013

  408. Published

    Pharmaceutical compositions comprising lubricants for preventing or reducing aseptic loosening in a subject. / Lee, Seunghwan (Inventor).

    IPC No.: A61K 31/715. May 16, 2013.

    Publication: ResearchPatent – Annual report year: 2013

  409. Published

    Phase-locked stereoscopic PIV measurements of the turbulent swirling flow in a dynamic model of a uniflow-scavenged two-stroke engine cylinder. / Ingvorsen, Kristian Mark; Meyer, Knud Erik; Walther, Jens Honore; Mayer, Stefan.

    Proceedings of the 10th International Symposium on Particle Image Velocimetry. TU Delft, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  410. Published
  411. Published

    PIV in a model wind turbine rotor wake. / Meyer, Knud Erik; Naumov, Igor; Karbadin, Ivan; Mikkelsen, Robert Flemming; Sørensen, Jens Nørkær.

    10th International Symposium on Particle Image Velocimetry (PIV). TU Delft, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  412. Published
  413. Published

    Planar laser-induced fluorescence fuel imaging during gas-turbine relight. / Read, Robert; Rogerson, J.W.; Hochgreb, S.

    In: Journal of Propulsion and Power, Vol. 29, No. 4, 2013, p. 961-974.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  414. Published

    Platform based design of EAP transducers in Danfoss PolyPower A/S. / Sarban, Rahimullah; Guðlaugsson, Tómas Vignir.

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 8687, 2013, p. 86870L.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  415. Published

    PLM Support for Development of Modular Product Families. / Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf.

    ICED 2013. International Conference on Engineering Design. Design Society, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  416. Published
  417. Published

    Preferred Air Velocity and Local Cooling Effect of desk fans in warm environments. / Simone, Angela; Olesen, Bjarne W.

    Proceedings of the 34th AIVC conference . 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  418. Published
  419. Published

    Probabilistic modelling of the process induced variations in pultrusion. / Baran, Ismet; Hattel, Jesper Henri; Tutum, C.C.

    Proceedings of 19th International Conference on Composite Materials (ICCM19). ed. / Suong Van Hoa; Pascal Hubert. Canadian Association for Composite Structures and Materials, 2013. p. 6308-6319.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  420. Published

    Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. / Thompson, Mary Kathryn (Editor).

    Worcester, MA : DCEE, 2013.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  421. Published

    Proceedings of the 7th International Conference on Axiomatic Design. / Thompson, Mary Kathryn (Editor).

    ICAD, 2013.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  422. Published

    Process chain for nano surface texture of metal and polymer micro structures. / Tosello, Guido; Calaon, Matteo; Tang, P.T.; Ravn, C.; Hansen, Hans Nørgaard.

    Book of abstracts. 2013. p. 249-250.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  423. Published

    Process induced residual stresses and distortions in pultrusion. / Baran, Ismet; Tutum, Cem Celal; Nielsen, Michael Wenani; Hattel, Jesper Henri.

    In: Composites Part B: Engineering, Vol. 51, 2013, p. 148–161.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  424. Published
  425. Published

    Product platform considerations on a project that develops sustainable low-cost housing for townships. / Wörösch, Michael; Bonev, Martin; Mortensen, Niels Henrik.

    2013. Paper presented at CIB World Building Congress 2013, Brisbane, Australia.

    Publication: Research - peer-reviewPaper – Annual report year: 2013

  426. Published

    Product-related Environmental Performance Indicators: a systematic literature review. / Issa, Isabela I.; Antelmi Pigosso, Daniela Cristina; McAloone, Tim C.; Rozenfeld, Henrique .

    Proceedings of EcoDesign 2013 International Symposium. Korea National Cleaner Production Center, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  427. Published

    PSS Business Models : A workbook in the PROTEUS series. / Andersen, Jakob Axel Bejbro; McAloone, Tim C.; Garcia i Mateu, Adrià; Mougaard, Krestine; Neugebauer, Line Maria; Hsuan, Juliana; Ahm, Thorkild.

    Technical University of Denmark (DTU), 2013. 64 p. (PROTEUS Workbook series; No. PRO-07).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  428. Published

    PSS Organisation : A workbook in the PROTEUS series. / Apitz, Nikolaj ; McAloone, Tim C.; Garcia i Mateu, Adrià; Andersen, Jakob Axel Bejbro; Mougaard, Krestine; Neugebauer, Line Maria; Hsuan, Juliana.

    Technical University of Denmark (DTU), 2013. 60 p. (PROTEUS Workbook series; No. PRO-05).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  429. Published

    PSS Partnerships : A workbook in the PROTEUS series. / Andersen, Jakob Axel Bejbro; Mougaard, Krestine; McAloone, Tim C.; Garcia i Mateu, Adrià; Neugebauer, Line Maria; Hsuan, Juliana; Ahm, Thorkild.

    Technical University of Denmark (DTU), 2013. 54 p. (PROTEUS Workbook series; No. PRO-06).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  430. Published

    PSS Readiness Manual : A workbook in the PROTEUS series. / Avlonitis, Viktor ; Hsuan, Juliana; McAloone, Tim C.; Garcia i Mateu, Adrià; Andersen, Jakob Axel Bejbro; Mougaard, Krestine; Neugebauer, Line Maria; Ahm, Thorkild.

    Technical University of Denmark (DTU), 2013. 48 p. (PROTEUS Workbook series; No. PRO-03).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  431. Published

    PSS Tool Book : A workbook in the PROTEUS series. / Finken, Knud Hellek; McAloone, Tim C.; Avlonitis, Viktor ; Garcia i Mateu, Adrià; Andersen, Jakob Axel Bejbro; Mougaard, Krestine; Neugebauer, Line Maria; Hsuan, Juliana.

    Technical University of Denmark (DTU), 2013. 78 p. (PROTEUS Workbook series; No. PRO-04).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  432. Published
  433. Published

    Quantification of Feeding Effects of Spot Feeding Ductile Iron Castings made in Vertically Parted Moulds. / Vedel-Smith, Nikolaj Kjelgaard; Tiedje, Niels Skat; Sällström, J.; Maza, K.T.

    2013. Paper presented at CastExpo and 117th Metalcasting Congress 2013, St.Louis, MI, United States.

    Publication: ResearchPaper – Annual report year: 2013

  434. Published

    Quantification of local and global elastic anisotropy in ultrafine grained gradient microstructures, produced by linear flow splitting. / Niehuesbernd, Jörn; Müller, Clemens; Pantleon, Wolfgang; Bruder, Enrico.

    In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 560, 2013, p. 273-277.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  435. Published

    Quasi-steady state power law model for flow of (La0·85Sr0·15)0·9MnO3 ceramic slurry in tape casting. / Jabbari, M; Bulatova, R; Hattel, J H; Bahl, C R H.

    In: Materials Science and Technology, Vol. 29, No. 9, 2013, p. 1080-1087.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  436. Published

    RANS-based simulation of turbulent wave boundary layer and sheet-flow sediment transport processes. / Fuhrman, David R.; Schløer, Signe; Sterner, Johanna.

    In: Coastal Engineering, Vol. 73, 2013, p. 151-166.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  437. Published

    Rayleigh Number Criterion for Formation of A-Segregates in Steel Castings and Ingots. / Rad, M. Torabi; Kotas, Petr; Beckermann, C.

    In: Metallurgical and Materials Transactions A, Vol. 44, No. 9, 2013, p. 4266-4281.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  438. Published

    Real-Time Simulation of Ship-Structure and Ship-Ship Interaction. / Lindberg, Ole; Glimberg, Stefan Lemvig; Bingham, Harry B.; Engsig-Karup, Allan Peter; Schjeldahl, Peter J.

    Proceedings of the 3rd International Conference on Ship Manoeuvring in Shallow and Confined Water 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  439. Published

    Recent Advances in Compressed Air Energy Storage and Thermo-Mechanical Electricity Storage Technologies. / Elmegaard, Brian (Author).

    2013. DTU International Energy Conference 2013, Lyngby, Denmark, 10/09/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  440. Published

    Recrystallization of deformed copper - kinetics and microstructural evolution. / Lin, Fengxiang; Juul Jensen, Dorte (Supervisor); Pantleon, Wolfgang (Supervisor).

    DTU Wind Energy, 2013. 136 p. (DTU Wind Energy PhD; No. 0011(EN)).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  441. Published

    Reducing variety in product solution spaces of engineer-to-order companies: The case of Novenco A/S. / Haug, Anders; Hvam, Lars; Mortensen, Niels Henrik.

    In: International Journal of Product Development, Vol. 18, No. 6, 2013, p. 531-547.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  442. Published

    Reflectance spectroscopy from TiO2 particles embedded in polyurethane. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede; Schou, Jørgen; Ambat, Rajan.

    Proceedings of EUROCORR 2013. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  443. Published

    Reinforcement layout design for concrete structures based on continuum damage and truss topology optimization. / Amir, Oded; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 2, 2013, p. 157-174.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  444. Published

    Reliability Estimation of the Pultrusion Process Using the First-Order Reliability Method (FORM). / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Applied Composite Materials, Vol. 20, No. 4, 2013, p. 639-653.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  445. Published

    Reliability of electrode wear compensation based on material removal per discharge in micro EDM milling. / Bissacco, Giuliano; Tristo, G.; Hansen, Hans Nørgaard; Valentincic, J.

    In: C I R P Annals, Vol. 62, No. 1, 2013, p. 179-182.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  446. Published
  447. Published

    Report for Working Group 1: Design Research in Civil and Environmental Engineering. / Thompson, Mary Kathryn; Paradisi, Irene .

    Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. ed. / Mary Kathryn Thompson . DCEE, 2013. p. 145-147.

    Publication: ResearchBook chapter – Annual report year: 2013

  448. Published

    Report for Working Group 2 : Design Education in Civil and Environmental Engineering. / Bjerregaard Jensen, Lotte; Thompson, Mary Kathryn.

    Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. ed. / Mary Kathryn Thompson . DCEE, 2013. p. 148-149.

    Publication: ResearchBook chapter – Annual report year: 2013

  449. Published
  450. Published

    Research on improved design of airfoil profiles based on the continuity of airfoil surface curvature of wind turbines. / Chen, Jin; Cheng, Jiangtao; Shen, Wenzhong; Zhu, Weijun; Wang, Xudong.

    In: Taiyang Neng Xuebao, Vol. 34, No. 4, 2013, p. 547-554.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  451. Published

    Residual liquefaction of seabed under standing waves. / Kirca, V.S. Ozgur; Sumer, B. Mutlu; Fredsøe, Jørgen.

    In: Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 139, No. 6, 2013, p. 489-501.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  452. Published

    Rigid Body Time Integration by Convected Base Vectors with Implicit Constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    COMPDYN 2013. 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. ed. / M. Papadrakakis; V. Papadopoulos; V. Plevris. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  453. Published

    Robustness of building design with respect to energy related occupant behaviour. / Fabi, Valentina; Buso, Tiziana; Andersen, Rune Korsholm; Corgnati, Stefano P.; Olesen, Bjarne W.

    Proceedings of BS2013. IBPSA, 2013. p. 1999-2006.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  454. Published

    Robust topology optimization accounting for geometric imperfections. / Schevenels, M.; Jansen, M.; Lombaert, Geert; Lazarov, Boyan Stefanov; Sigmund, Ole.

    Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of 11th International Conference on Structural Safety and Reliability. Taylor & Francis, 2013. p. 4965-4972.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  455. Published

    Robust topology optimization accounting for misplacement of material. / Jansen, Miche; Lombaert, Geert; Diehl, Moritz; Lazarov, Boyan Stefanov; Sigmund, Ole; Schevenels, Mattias.

    In: Structural and Multidisciplinary Optimization, Vol. 47, No. 3, 2013, p. 317-333.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  456. Published

    Safety guidelines of ultimate hull girder strength for grounded container ships. / Kim, Do Kyun; Pedersen, Preben Terndrup; Paik, Jeom Kee; Kim, Han Byul; Zhang, Xiaoming; Kim, Min Soo.

    In: Safety Science, Vol. 59, 2013, p. 46-54.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  457. Published

    Second-order theory for coupling 2D numerical and physical wave tanks: Derivation, evaluation and experimental validation. / Yang, Zhiwen; Liu, Shuxue; Bingham, Harry B.; Li, Jinxuan.

    In: Coastal Engineering, Vol. 71, 2013, p. 37-51.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  458. Published

    Self-organising and self-healing within biomimetics, in Engineered Biomimicry. / Lenau, Torben Anker; Hesselberg, Thomas.

    Engineered Biomimicry. ed. / Ahklesh Lahktakia; Raul Jose Martin-Palma. Elsevier Science, 2013. p. 337-362.

    Publication: ResearchBook chapter – Annual report year: 2013

  459. Published

    Shape optimization of the stokes flow problem based on isogeometric analysis. / Park, Byong-Ug ; Seo, Yu-Deok ; Sigmund, Ole; Youn, Sung-Kie.

    In: Structural and Multidisciplinary Optimization, Vol. 48, 2013, p. 965-977.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  460. Published

    Ship collisions against wind turbines, quays and bridge piers. / Pedersen, Preben Terndrup.

    Proceedings of the 6th International Conference on Collision and Grounding of Ships and Offshore Structures, ICCGS 2013. Balkema Publishers, A.A. / Taylor & Francis The Netherlands, 2013. p. 273-280.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  461. Published

    Simulation-aided investigation of beam hardening induced errors in CT dimensional metrology. / Tan, Ye; Kiekens, Kim; Welkenhuyzen, Frank; Angel, Jais Andreas Breusch; De Chiffre, Leonardo; Kruth, Jean-Pierre; Dewulf, Wim.

    The 11th International Symposium of Measurement Technology and Intelligent Instruments. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  462. Published

    Simulation of biodiesel combustion in a light-duty diesel engine using integrated compact biodiesel–diesel reaction mechanism. / Ng, Hoon Kiat; Gan, Suyin; Ng, Jo-Han; Pang, Kar Mun.

    In: Applied Energy, Vol. 102, 2013, p. 1275-1287.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  463. Published

    Simulation of the Initial 3-D Instability of an Impacting Drop Vortex Ring. / Sigurdson, Lorenz; Wiwchar, Justin; Walther, Jens Honore.

    In: American Physical Society. Bulletin, Vol. 58, No. 8, Abstract: R6.00005, 2013.

    Publication: Research - peer-reviewConference abstract in journal – Annual report year: 2013

  464. Published

    Sinking failure of scour protection at wind turbine foundation. / Sumer, B. Mutlu; Nielsen, Anders W.

    In: Institution of Civil Engineers. Proceedings. Energy, Vol. 166, No. EN4, 2013, p. 170-188.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  465. Published

    Sinking of irregular shape blocks into marine seabed under wave-induced liquefaction. / Kirca, Özgür.

    In: Coastal Engineering, Vol. 75, 2013, p. 40-51.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  466. Published

    Size effects in winding roll formed profiles: A study of carcass production for flexible pipes in offshore industry. / Nielsen, Peter Søe; Nielsen, Morten Storgaard; Bay, Niels.

    In: Key Engineering Materials, Vol. 549, 2013, p. 117-124.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  467. Published
  468. Published

    SPIV investigations of correlation between streamwise vorticity and velocity in the wake of a vortex generator in a boundary layer. / Velte, Clara Marika; Okulov, Valery; Hansen, Martin Otto Laver.

    Proceedings of 10th International Symposium on Particle Image Velocimetry - PIV13. TU Delft, 2013.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  469. Published

    Statics and Mechanics of Structures. / Krenk, Steen; Høgsberg, Jan Becker.

    Springer Science+Business Media B.V., 2013. 506 p.

    Publication: Research - peer-reviewBook – Annual report year: 2013

  470. Published

    Static strain and deformation controlled testing of composite beams. / Høgh, Jacob Herold; Waldbjørn, Jacob Paamand; Stang, Henrik; Berggreen, Christian; Schmidt, Jacob Wittrup; Branner, Kim.

    Proceedings of the 6th International Conference on Composites Testing and Model Identification. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  471. Published

    Statistical Outlier Detection for Jury Based Grading Systems. / Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder; Rosas, Harvey.

    120th ASEE Annual Conference and Exhibition. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  472. Published

    Statistics of ductile fracture surfaces: the effect of material parameters. / Ponson, Laurent ; Cao, Yuanyuan ; Bouchaud, Elisabeth ; Tvergaard, Viggo; Needleman, Alan .

    In: International Journal of Fracture, Vol. 184, No. 1-2, 2013, p. 137-149.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  473. Published

    Steady state characteristics of a tilting pad journal bearing with controllable lubrication: Comparison between theoretical and experimental results. / Cerda, Alejandro; Bjerregaard Nielsen, Bo; Santos, Ilmar.

    In: Tribology International, Vol. 58, No. 1, 2013, p. 85-97.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  474. Published

    Steam Assisted Accelerated Growth of Oxide Layer on Aluminium Alloys. / Din, Rameez Ud; Yuksel, Serkan; Jellesen, Morten Stendahl; Møller, Per; Ambat, Rajan.

    Proceedings of Eurocorr 2013. European Federation of Corrosion, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  475. Published

    Steep wave loads from irregular waves on an offshore wind turbine foundation: Computation and experiment. / Paulsen, Bo Terp; Bingham, Harry B.; Bredmose, Henrik; Schløer, Signe.

    Proceedings of ASME 2013 32st International Conference on Ocean, Offshore and Arctic Engineering. Vol. 9 American Society of Mechanical Engineers, 2013. OMAE2013-10727.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  476. Published

    Strategic implementation of design for environment at Embraer. / Antelmi Pigosso, Daniela Cristina; Grandi, Carlos M.; Rozenfeld, Henrique .

    Proceedings of EcoDesign 2013 International Symposium. Korea National Cleaner Production Center, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  477. Published

    Stress relaxation of entangled polystyrene solution after constant-rate, uniaxial elongation. / Matsumiya, Yumi ; Masubuchi, Yuichi ; Watanabe, Hiroshi ; Huang, Qian; Rasmussen, Henrik K.; Javier Alvarez, Nicolas; Hassager, Ole.

    2013. Abstract from The Society of Rheology 85th Annual Meeting, Montreal, Canada.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  478. Published

    Structural Color Optimization using Scalar Diffraction Theory. / Johansen, Villads Egede; Sigmund, Ole.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  479. Published

    Structural control of void formation in dual phase steels. / Azuma, Masafumi; Huang, Xiaoxu (Main supervisor); Winther, Grethe (Supervisor).

    DTU Wind Energy, 2013. 108 p. (DTU Wind Energy PhD; No. 0015).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  480. Published

    Structural eigenfrequency optimization based on local sub-domain "frequencies". / Pedersen, Pauli; Pedersen, Niels Leergaard.

    11th International Conference on Vibration Problems. ed. / Z. Dimitrovova. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  481. E-pub ahead of print

    Structural optimization of wind turbine rotor blades by multilevel sectional/multibody/3D-FEM analysis. / Bottasso, C. L.; Campagnolo, F.; Croce, A.; Dilli, S.; Gualdoni, F.; Nielsen, Martin Bjerre.

    In: Multibody System Dynamics, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  482. Published

    Structural optimization study of composite wind turbine blade. / Chen, Jin; Shen, Wen Zhong; Wang, Quan; Pang, Xiaoping; Li, Songlin; Guo, Xiaofeng.

    In: Materials & Design, Vol. 46, 2013, p. 247-255.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  483. Published

    Structural Reliability of Wind Turbine Blades : Design Methods and Evaluation. / Dimitrov, Nikolay Krasimirov; Staerdahl, Jesper (Supervisor); Friis-Hansen, Peter (Supervisor); Berggreen, Christian (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 214 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  484. Published

    Study on a method for estimating fuel consumption in a seaway. / Iseki, Toshio; Nielsen, Ulrik Dam.

    Proceedings of the ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  485. Published

    Surface replication assessment of sub-µm structures by atomic force microscopy. / Calaon, Matteo; Tosello, Guido; Tang, P.T.; Nørregaard, J.; Garnaes, J.; Hansen, Hans Nørgaard.

    2013. Abstract from EUSPEN Micro/Nano Manufacturing Workshop, Karlsruhe, Germany.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  486. Published

    Surface roughness characterization of cast components using 3D optical methods.. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat; Hansen, Hans Nørgaard.

    2013. Paper presented at CastExpo and 117th Metalcasting Congress 2013, St.Louis, MI, United States.

    Publication: ResearchPaper – Annual report year: 2013

  487. Published

    Swirling flow in a two-stroke marine diesel engine. / Hemmingsen, Casper S.; Ingvorsen, Kristian Mark; Walther, Jens Honore; Mayer, Stefan.

    Proceedings of the 26th Nordic Seminar on Computational Mechanics. ed. / A. Logg; K.A. Mardal. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  488. Published

    Systematic Approach to Formulate PSS Development Project Proposals in the Fuzzy Front End. / Barquet, Ana Paula B.; Antelmi Pigosso, Daniela Cristina; Rozenfeld, Henrique.

    Product-Service Integration for Sustainable Solutions: Proceedings of the 5th CIRP International Conference on Industrial Product-Service Systems, Bochum, Germany, March 14th - 15th, 2013. ed. / Horst Meier. Springer, 2013. p. 121-130 (Lecture Notes in Production Engineering).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  489. Published

    Teaching sustainability in engineering solutions as a generic bachelor course. / Olsen, Stig Irving; Nielsen, Susanne Balslev; Ejlertsen, Marina; McAloone, Tim C.

    Proceedings of Engineering Education for Sustainable Development EESD13. University of Cambridge, 2013. p. Paper 72.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  490. Published

    Technologies for waste heat recovery in off-shore applications. / Pierobon, Leonardo; Haglind, Fredrik; Kandepu, Rambabu ; Fermi, Alessandro ; Rossetti, Nicola .

    Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE 2013). American Society of Mechanical Engineers, 2013. p. IMECE2013-62304.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  491. Published

    Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines. / Klit, Peder; Persson, Sebastian; Vølund, Anders.

    12th EDF - Pprime Workshop: “Solutions for performance improvement and friction reduction of journal and thrust bearings”. 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  492. Published

    Testing of newly developed functional surfaces under pure sliding conditions. / Godi, Alessandro; Mohaghegh, Kamran; Grønbæk, J.; Klit, Peder; De Chiffre, Leonardo.

    In: Tribology Letters, Vol. 51, No. 1, 2013, p. 171-180.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  493. Published

    The aerodynamics of wind turbines. / Sørensen, Jens Nørkær; Mikkelsen, Robert Flemming; Troldborg, Niels; Okulov, Valery; Shen, Wen Zhong.

    Mechanics Down Under - Proceedings of the 22nd International Congress of Theoretical and Applied Mechanics, ICTAM 2008. Springer Science+Business Media B.V., 2013. p. 231-247.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  494. Published
  495. Published

    The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3. / Sonne, Mads Rostgaard; Tutum, Cem Celal; Hattel, Jesper Henri; Simar, A.; Meester, B. de.

    In: Journal of Materials Processing Technology, Vol. 213, 2013, p. 477-486.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  496. Published

    The effect of mandrel heating on the quality of the pultrusion process. / Baran, Ismet; Hattel, Jesper Henri.

    Proceedings of the 24th Annual International SICOMP Conference. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  497. Published

    The Effect of Rubric Rating Scale on the Evaluation of Engineering Design Projects. / Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder; Ahn, Beung-uk .

    In: International Journal of Engineering Education, Vol. 29, No. 6, 2013, p. 1490–1502.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  498. Published

    The effect of thermal contact resistance on the thermosetting pultrusion process. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Composites Part B: Engineering, Vol. 45, No. 1, 2013, p. 995-1000.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  499. Published

    The effect on overall energy consumption at a hydrogen refueling station by cascade fueling a hydrogen vehicle. / Rothuizen, Erasmus Damgaard; Rokni, Masoud.

    Conference Proceedings of 6th International Conference of Sustainable Energy and Environmental Protection. SEEP, 2013. p. 27-32.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  500. Published

    The impact of process parameters on the residual stresses and distortions in pultrusion. / Baran, Ismet; Hattel, Jesper Henri; Tutum, C.C.

    Proceedings of 19th International Conference on Composite Materials (ICCM19). ed. / Suong Van Hoa; Pascal Hubert. Canadian Association for Composite Structures and Materials, 2013. p. 6328-6337.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  501. Published

    The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine. / Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri.

    In: Key Engineering Materials, Vol. 554-557, 2013, p. 2127-2137.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  502. Published

    The Lactococcus lactis Thioredoxin System. / Efler, Petr; Hägglund, Per (Supervisor); Svensson, Birte (Supervisor).

    Kgs. Lyngby : Department of Systems Biology, DTU, 2013. 146 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

Previous 1 2 3 4 5 6 7 8 ...10 Next
Download list: To download, please limit the number of search results to 1,000 or less.