Department of Mechanical Engineering

  1. 2015
  2. Published

    3D numerical simulation of projection welding of square nuts to sheets. / Nielsen, Chris Valentin; Zhang, W.; Martins, P. A. F.; Bay, Niels.

    In: Journal of Materials Processing Technology, Vol. 215, 2015, p. 171–180.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published
  4. Published
  5. Published
  6. Published

    Corrosion issues of powder coated AA6060 aluminium profiles. / Din, Rameez Ud; Valgarðsson, Smári ; Jellesen, Morten Stendahl; Eriksen, Hans Jørgen ; Praastrup, Ulrik ; Møller, Per; Ambat, Rajan.

    In: Engineering Failure Analysis, Vol. 47, 2015, p. 16–24.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  7. Published

    Deformation-induced orientation spread in individual bulk grains of an interstitial-free steel. / Oddershede, Jette; Wright, J.P.; Beaudoin, A. ; Winther, Grethe.

    In: Acta Materialia, Vol. 85, 2015, p. 301–313.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  8. Published

    Development of the compound layer during nitriding and nitrocarburising of iron and iron-carbon alloys. / Somers, Marcel A. J.

    Thermochemical Surface Engineering of Steels. ed. / E.J. Mittemeijer; M.A.J. Somers. Woodhead Publishing, 2015. p. 341-372.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  9. Published

    Directional bending wave propagation in periodically perforated plates. / Andreassen, Erik; Manktelow, Kevin ; Ruzzene, Massimo .

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 187–203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  10. Published
  11. Published

    Environmentally friendly joining of tubes by their ends. / Silva, Carlos M.A. ; Nielsen, Chris Valentin; Alves, Luis M.; Martins, Paulo A.F.

    In: Journal of Cleaner Production, Vol. 87, 2015, p. 777–786.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  12. Published

    Failure by fracture in bulk metal forming. / Silva, C.M.A. ; Alves, Luis M.; Nielsen, Chris Valentin; Atkins, A.G.; Martins, P. A. F.

    In: Journal of Materials Processing Technology, Vol. 215, 2015, p. 287–298.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  13. Published

    Friction stir processed Al–TiO2 surface composites: Anodising behaviour and optical appearance. / Gudla, Visweswara Chakravarthy; Jensen, Flemming; Simar, Aude; Shabadi, Rajashekhara; Ambat, Rajan.

    In: Applied Surface Science, Vol. 324, 2015, p. 554–562.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  14. Published

    Gaseous processes for low temperature surface hardening of stainless steel. / Somers, Marcel A. J.; Christiansen, Thomas Lundin.

    Thermochemical Surface Engineering of Steels. ed. / E.J. Mittemeijer; M.A.J. Somers. Woodhead Publishing, 2015. p. 581-614.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  15. Published

    Investigation of process induced warpage for pultrusion of a rectangular hollow profile. / Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko.

    In: Composites Part B: Engineering, Vol. 68, 2015, p. 365-374.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  16. Published

    Iterative Brinkman penalization for remeshed vortex methods. / Hejlesen, Mads Mølholm; Koumoutsakos, Petros; Leonard, Anthony; Walther, Jens Honore.

    In: Journal of Computational Physics, 2015, p. 547-562.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  17. Published

    Kinetics of thermochemical surface treatments. / Mittemeijer, E.J.; Somers, Marcel A. J.

    Thermochemical Surface Engineering of Steels. ed. / E.J. Mittemeijer; M.A.J. Somers. Woodhead Publishing, 2015. p. 113-140.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  18. Published

    Low temperature surface hardening of stainless steel. / Somers, Marcel A. J.; Christiansen, Thomas Lundin.

    Thermochemical Surface Engineering of Steels. ed. / E.J. Mittemeijer; M.A.J. Somers. Woodhead Publishing, 2015. p. 557-579.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  19. Published

    Modeling and simulation of the deformation process of PTFE flexiblestamps for nanoimprint lithography on curved surfaces. / Sonne, Mads Rostgaard; Smistrup, K.; Hannibal, Morten ; Thorborg, Jesper; Nørregaard, J.; Hattel, Jesper Henri.

    In: Journal of Materials Processing Technology, Vol. 216, 2015, p. 418–429.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  20. Published

    Numerical and Experimental Investigation of Heat Flow in Permanent Magnet Brushless DC Hub Motor.. / Fasil, Muhammed; Plesner, Daniel; Walther, Jens Honore; Mijatovic, Nenad; Holbøll, Joachim; Jensen, Bogi Bech.

    In: SAE International Journal of Alternative Powertrains, Vol. 4, No. 1, V124-8EJ, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  21. Published
  22. Published

    Optimization of nonlinear structural resonance using the incremental harmonic balance method. / Dou, Suguang; Jensen, Jakob Søndergaard.

    In: Journal of Sound and Vibration, Vol. 334, 2015, p. 239–254.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  23. Published
  24. Published
  25. Published

    Thermochemical surface engineering of steels. / Mittemeijer, Eric J. (Editor); Somers, Marcel A. J. (Editor).

    Woodhead Publishing, 2015. 816 p. (Woodhead Publishing Series in Metals and Surface Engineering; No. 62).

    Publication: ResearchBook – Annual report year: 2014

  26. Published

    Thermodynamics and kinetics of gas and gas-solid reactions. / Slycke, J. T. ; Somers, Marcel A. J.; Mittemeijer, E.J.

    Thermochemical Surface Engineering of Steels. ed. / E.J. Mittemeijer; M.A.J. Somers. Woodhead Publishing, 2015. p. 3-111.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  27. Published

    Vibration suppression for strings with distributed loading using spatial cross-section modulation. / Sorokin, Vladislav; Thomsen, Jon Juel.

    In: Journal of Sound and Vibration, Vol. 335, 2015, p. 66–77.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  28. 2014
  29. Published

    A Biomimetic Approach to Lubricate Engineering Materials. / Røn, Troels; Lee, Seunghwan (Main supervisor).

    Technical University of Denmark. Department of Mechanical Engineering, 2014. 184 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  30. Published

    Achieving generic competences through a cross-disiplinary research based course in Arctic Technology. / Kirkelund, Gunvor Marie; Hansen, Claus Thorp; Jensen, Pernille Erland.

    Proceedings of the SEFI Annual Conference 2014 . 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  31. Published

    A comparison of advanced heat recovery power cycles in a combined cycle for large ships. / Larsen, Ulrik; Sigthorsson, Oskar; Haglind, Fredrik.

    In: Energy, Vol. 74, 2014, p. 260–268.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  32. Published

    Adsorption and nanowear properties of bovine submaxillary mucin films on solid surfaces: Influence of solution pH and substrate hydrophobicity. / Sotres, Javier; Madsen, Jan Busk; Arnebrant, Thomas; Lee, Seunghwan.

    In: Journal of Colloid and Interface Science, Vol. 428, 2014, p. 242-250.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  33. Published

    Advanced Topology Optimization Methods for Conceptual Architectural Design. / Aage, Niels; Amir, Oded; Clausen, Anders; Hadar, Lior ; Maier, Dana ; Søndergaard, Asbjørn .

    Advances in Architectural Geometry 2014. ed. / P. Block; J. Knippers; N.J. Mitra; W. Wang. Springer, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  34. Published

    A Framework for the Application of Robust Design Methods and Tools. / Göhler, Simon Moritz; Howard, Thomas J.

    Proceedings of the First Internatinal Symposium of Robust Design 2014. ed. / Thomas J. Howard; Tobias Eifler. Copenhagen : Technical University of Denmark, 2014. p. 123-133.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  35. Published

    A Functional Thinking Approach to the Design of Future Transportation Systems: Taxis as a Proxy for Personal Rapid Transit in South Korea. / Thompson, Mary Kathryn; Bae, Hyun Hye .

    Proceedings of the 3rd International Workshop on Design in Civil and Environmental Engineering. ed. / Lotte Bjerregaard Jensen; Mary Kathryn Thompson. DCEE, 2014. p. 47-63.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  36. Published

    Allergic chromium dermatitis from wearing 'chromium-free' footwear. / Thyssen, Jacob P.; Jellesen, Morten Stendahl; Møller, Per; Menne, Torkil; Johansen, Jeanne D.

    In: Contact Dermatitis, Vol. 70, No. 3, 2014, p. 185-187.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    Allometric equations for maximum filtration rate in blue mussels Mytilus edulis and importance of condition index. / Riisgård, Hans Ulrik ; Larsen, Poul Scheel; Pleissner, Daniel .

    In: Helgoland Marine Research, Vol. 68, No. 1, 2014, p. 193-198.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    Analyses of hydraulic performance of velocity caps. / Christensen, Erik Damgaard; Degn Eskesen, Mark Chr.; Buhrkall, Jeppe; Jensen, Bjarne.

    Book of Proceedings. IAHR, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  39. Published

    Analysis of Cavity Pressure and Warpage of Polyoxymethylene Thin Walled Injection Molded Parts: Experiments and Simulations. / Guerrier, Patrick; Tosello, Guido; Hattel, Jesper Henri.

    Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). Polymer Processing Society, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  40. Published

    Analysis of enhanced modal damping ratio in porous materials using an acoustic-structure interaction model. / Kook, Junghwan; Jensen, Jakob Søndergaard.

    In: A I P Advances, Vol. 4, No. 12, 2014, p. 124304.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  41. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  42. Published
  43. Published

    Analytical sensitivity analysis and topology optimization of nonlinear resonant structures with hardening and softening behavior. / Dou, Suguang; Jensen, Jakob Søndergaard.

    2014. Abstract from 17th U.S. National Congress on Theoretical and Applied Mechanics, East Lansing, Michigan, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  44. Published

    An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders. / Paulsen, Bo Terp; Bredmose, Henrik; Bingham, Harry B.

    In: Coastal Engineering, Vol. 86, 2014, p. 57-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  45. Published
  46. Published

    An Improved Coupling of Numerical and Physical Models for Simulating Wave Propagation. / Yang, Zhiwen; Liu, Shu-xue; Li, Jin-xuan.

    In: China Ocean Engineering, Vol. 28, No. 1, 2014, p. 1-16.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  47. Published

    Anodisation of sputter deposited aluminium–titanium coatings: Effect of microstructure on optical characteristics. / Aggerbeck, Martin; Junker-Holst, Andreas ; Vestergaard Nielsen, Daniel ; Gudla, Visweswara Chakravarthy; Ambat, Rajan.

    In: Surface and Coatings Technology, Vol. 254, 2014, p. 138–144.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  48. Published

    Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Shabadi, Rajashekhara ; Rechendorff, Kristian ; Schou, Jørgen; Ambat, Rajan.

    Light Metals 2014. ed. / John Grandfield. John Wiley & Sons Ltd, 2014. p. 369-373.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  49. E-pub ahead of print
  50. Published
  51. Published
  52. Published

    Anti-corrosive Conversion Coating on Aluminium Alloys Using High Temperature Steam. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from Corrosion and Prevention 2014, Darwin, Australia.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

Previous 1 2 3 4 5 6 7 8 ...102 Next
Download list: To download, please limit the number of search results to 1,000 or less.