Department of Mechanical Engineering

  1. 2014
  2. Published

    Allometric equations for maximum filtration rate in blue mussels Mytilus edulis and importance of condition index. / Riisgård, Hans Ulrik ; Larsen, Poul Scheel; Pleissner, Daniel .

    In: Helgoland Marine Research, Vol. 68, No. 1, 2014, p. 193-198.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  3. Published

    Analysis of moderately thin-walled beam cross-sections by cubic isoparametric elements. / Høgsberg, Jan Becker; Krenk, Steen.

    In: Computers and Structures, Vol. 134, 2014, p. 88-101.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  4. Published

    An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders. / Paulsen, Bo Terp; Bredmose, Henrik; Bingham, Harry B.

    In: Coastal Engineering, Vol. 86, 2014, p. 57-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  5. E-pub ahead of print
  6. Published

    An Improved Coupling of Numerical and Physical Models for Simulating Wave Propagation. / Yang, Zhiwen; Liu, Shu-xue; Li, Jin-xuan.

    In: China Ocean Engineering, Vol. 28, No. 1, 2014, p. 1-16.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  7. Published

    Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings. / Gudla, Visweswara Chakravarthy; Canulescu, Stela; Shabadi, Rajashekhara ; Rechendorff, Kristian ; Schou, Jørgen; Ambat, Rajan.

    Light Metals 2014. ed. / John Grandfield. John Wiley & Sons Ltd, 2014. p. 369-373.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  8. Published
  9. Published
  10. Published

    Anti-corrosive Conversion Coating on Aluminium Alloys Using High Temperature Steam. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from Corrosion and Prevention 2014, Darwin, Australia.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  11. Published
  12. Published

    A personal matter? An investigation of students design process experiences when using a heuristic or a systematic method. / Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin .

    In: Design Studies, Vol. 35, No. 2, 2014, p. 133-159.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  13. Published

    A plateau–valley separation method for textured surfaces with a deterministic pattern. / Godi, Alessandro; Kühle, Anders; De Chiffre, Leonardo.

    In: Precision Engineering, Vol. 38, No. 1, 2014, p. 190-196.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published

    A proposal for a classification of product-related dependencies in development of mechatronic products. / Torry-Smith, Jonas; Mortensen, Niels Henrik; Achiche, Sofiane.

    In: Research in Engineering Design, Vol. 25, No. 1, 2014, p. 53-74.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  15. Published

    Aquaculture as a part of a multi-use platform. / Christensen, Erik Damgaard; Svenstrup Petersen, Ole ; Aarup Ahrensberg, Nick; Møhlenberg, Flemming; Zanuttigh, Barbara .

    Proceedings of the 5th Offshore Mariculture Conference. 2014.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  16. Published

    A reciprocating pin-on-plate test-rig for studying friction materials for holding brakes. / Poulios, Konstantinos; Drago, Nicola; Klit, Peder; De Chiffre, Leonardo.

    In: Wear, Vol. 311, No. 1-2, 2014, p. 40-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  17. Published

    A system boundary identification method for life cycle assessment. / Li, Tao; Zhang, Hongchao; Liu, Zhichao; Ke, Qingdi; Alting, Leo.

    In: The International Journal of Life Cycle Assessment, Vol. 19, No. 3, 2014, p. 646-660.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    A Two-Phase Flow Solver for Incompressible Viscous Fluids, Using a Pure Streamfunction Formulation and the Volume of Fluid Technique. / Comminal, Raphaël; Spangenberg, Jon; Hattel, Jesper Henri.

    In: Defect and Diffusion Forum, Vol. 348, 2014, p. 9-19.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  19. Published

    AZ91C magnesium alloy modified by Cd. / Shabadi, R.; Ambat, Rajan; Dwarakadasa, E.S.

    In: Materials & Design, Vol. 53, 2014, p. 445-451.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. Published

    Band gap structure modification of amorphous anodic Al oxide film by Ti-alloying. / Canulescu, Stela; Rechendorff, K.; Borca, C. N.; Jones, N. C.; Bordo, Kirill; Schou, Jørgen; Nielsen, Lars Pleth; Hoffmann, S. V.; Ambat, Rajan.

    In: Applied Physics Letters, Vol. 104, No. 12, 121910, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  21. Published

    Bingham plastic fluid flow model in tape casting of ceramics using two doctor blades – analytical approach. / Jabbari, Masoud; Hattel, Jesper Henri.

    In: Materials Science and Technology, Vol. 30, No. 3, 2014, p. 283-288.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published

    Characterization of steam generated anti-corrosive oxide films on Aluminium alloys. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from 225th ECST Meeting, Orlando, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  23. Published

    Comparison of Neural Network Error Measures for Simulation of Slender Marine Structures. / Christiansen, Niels H.; Voie, Per Erlend Torbergsen; Winther, Ole; Høgsberg, Jan Becker.

    In: Journal of Applied Mathematics, Vol. 2014, 759834, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  24. Published

    Computational strain gradient crystal plasticity. / Niordson, Christian Frithiof; Kysar, Jeffrey W.

    In: Journal of the Mechanics and Physics of Solids, Vol. 62, 2014, p. 31-47.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  25. Published

    Conservative rigid body dynamics by convected base vectors with implicit constraints. / Krenk, Steen; Nielsen, Martin Bjerre.

    In: Computer Methods in Applied Mechanics and Engineering, Vol. 269, 2014, p. 437-453.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  26. Published

    Corrigendum to “Second-order theory for coupling 2D numerical and physical wave tanks-Derivation, evaluation and experimental validation” [Coast. Eng. 71 (2013) 37–51]. / Yang, Zhiwen; Liu, Shuxue; Bingham, Harry B.; Li, Jinxuan.

    In: Coastal Engineering, Vol. 85, 2014, p. 87-88.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  27. Published
  28. Published

    Cross-shore redistribution of nourished sand near a breaker bar. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen.

    In: Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 140, No. 2, 2014, p. 125-134.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  29. Published

    Damping of Wind Turbine Tower Vibrations by a stroke amplifying brace concept. / Brodersen, Mark Laier (Author); Høgsberg, Jan Becker (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2014

  30. Published

    DeepWind. From idea to 5 MW concept. / Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author).

    2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.

    Publication: Research - peer-reviewSound/Visual production (digital) – Annual report year: 2014

  31. Published

    Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms. / Pierobon, Leonardo; Haglind, Fredrik.

    In: Applied Energy, Vol. 118, 2014, p. 156–165.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  32. Published

    Design and optimization of mechanically down-doped terahertz fiber directional couplers. / Bao, Hualong; Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd; Bang, Ole.

    In: Optics Express, Vol. 22, No. 8, 2014, p. 9486-9497.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  33. Published

    Design methodology for flexible energy conversion systems accounting for dynamic performance. / Pierobon, Leonardo; Casati, Emiliano ; Casella, Francesco ; Haglind, Fredrik; Colonna, Piero .

    In: Energy, Vol. 68, 2014, p. 667-679.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  34. Published

    Design of manufacturable 3D extremal elastic microstructure. / Andreassen, Erik; Lazarov, Boyan Stefanov; Sigmund, Ole.

    In: Mechanics of Materials, Vol. 69, 2014, p. 1-10.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  35. Published

    Design of structurally colored surfaces based on scalar diffraction theory. / Johansen, Villads Egede; Andkjær, Jacob Anders; Sigmund, Ole.

    In: Optical Society of America. Journal B: Optical Physics, Vol. 31, No. 2, 2014, p. 207-217.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  36. Published

    Development of a numerical 2-dimensional beach evolution model. / Baykal, Cüneyt.

    In: Turkish Journal of Earth Sciences, Vol. 23, No. 2, 2014, p. 215-231.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  37. Published

    Direct observation of grain boundary migration during recrystallization within the bulk of a moderately deformed aluminium single crystal. / Van Boxel, Steven; Schmidt, Søren; Ludwig, Wolfgang; Zhang, Yubin; Juul Jensen, Dorte; Pantleon, Wolfgang.

    In: Materials Transactions, Vol. 55, No. 1, 2014, p. 128-136.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  38. Published

    Dynamic characteristics of polymer faced tilting pad journal bearings. / Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar; Glavatskih, Sergei.

    In: Tribology International, Vol. 74, 2014, p. 20-27.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  39. Published

    Effect of inclusion density on ductile fracture toughness and roughness. / Srivastava, Akhilesh Kumar; Ponson, L.; Osovski, S.; Bouchaud, E.; Tvergaard, Viggo; Needleman, A.

    In: Journal of the Mechanics and Physics of Solids, Vol. 63, 2014, p. 62-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  40. Published

    Elucidating of rotation speed in friction stir welding of pure copper: Thermal modeling. / Jabbari, Masoud.

    In: Computational Materials Science, Vol. 81, 2014, p. 296-302.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  41. Published

    Estimation of burst-mode LDA power spectra. / Velte, Clara Marika; George, William K.; Buchhave, Preben.

    In: Experiments in Fluids, Vol. 55, No. 3, 1674, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  42. Published
  43. Published
  44. E-pub ahead of print
  45. Published

    Explicit free‐floating beam element. / Nielsen, Martin Bjerre; Krenk, Steen.

    In: International Journal for Numerical Methods in Engineering, Vol. 98, No. 1, 2014, p. 59-78.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  46. Published
  47. Published

    Extended neural network-based scheme for real-time force tracking with magnetorheological dampers. / Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker.

    In: Structural Control and Health Monitoring, Vol. 21, No. 2, 2014, p. 225–247.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  48. Published

    Formation and development of a breaker bar under regular waves. Part 2: Sediment transport and morphology. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen.

    In: Coastal Engineering, Vol. 88, 2014, p. 55-68.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  49. Published

    How to determine composite material properties using numerical homogenization. / Andreassen, Erik; Andreasen, Casper Schousboe.

    In: Computational Materials Science, Vol. 83, 2014, p. 488-495.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  50. Published
  51. Published

    Influence of light sheet separation on SPIV measurement in a large field spanwise plane : Paper. / Foucaut, J M; Coudert, S; Braud, C; Velte, Clara Marika.

    In: Measurement Science and Technology, Vol. 25, No. 3, 035304, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  52. Published

    Interchain tube pressure effect in extensional flows of oligomer diluted nearly monodisperse polystyrene melts. / Rasmussen, Henrik K.; Huang, Qian.

    In: Rheologica Acta, Vol. 53, No. 3, 2014, p. 199-208.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  53. Published

    Interface diagram: Design tool for supporting the development of modularity in complex product systems. / Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf.

    In: Concurrent Engineering: Research and Applications, Vol. 22, No. 1, 2014, p. 62-76.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  54. Published
  55. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    2014. Poster session presented at 5th International Conference on Industrial Computed Tomography (iCT), Wels, Austria.

    Publication: ResearchPoster – Annual report year: 2014

  56. Published
  57. Published

    Investigation of ammonia/water hybrid absorption/compression heat pumps for heat supply temperatures above 100 °C. / Jensen, Jonas Kjær; Reinholdt, Lars; Markussen, Wiebke Brix; Elmegaard, Brian.

    2014. Paper presented at International Sorption Heat Pump Conference (ISHPC 2014), Washington, United States.

    Publication: Research - peer-reviewPaper – Annual report year: 2014

  58. Published
  59. Published
  60. Published

    Lift of a Rotating Circular Cylinder in Unsteady Flows. / Carstensen, Stefan; Mandviwalla, Xerxes ; Vita, Luca; Schmidt Paulsen, Uwe.

    In: Journal of Ocean and Wind Energy, Vol. 1, No. 1, 2014, p. 41-49.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  61. Published

    Measurement Uncertainty Evaluation in Dimensional X-ray Computed Tomography Using the Bootstrap Method. / Hiller, Jochen; Genta, Gianfranco ; Barbato, Giulio ; De Chiffre, Leonardo; Levi, Raffaello .

    In: International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 4, 2014, p. 617-622.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  62. E-pub ahead of print

    Memory resistive switching in CeO2-based film microstructures patterned by a focused ion beam. / Velichko, A.; Boriskov, P.; Grishin, A.; Khartsev, S.; Yar, Mazher Ahmed; Muhammed, M.

    In: Thin Solid Films, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  63. Published

    Moving least squares simulation of free surface flows. / Felter, C.L.; Walther, Jens Honore; Henriksen, Christian.

    In: Computers & Fluids, Vol. 91, 2014, p. 47-56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  64. Published

    Multiple regression models for the prediction of the maximum obtainable thermal efficiency of organic Rankine cycles. / Larsen, Ulrik; Pierobon, Leonardo; Wronski, Jorrit; Haglind, Fredrik.

    In: Energy, Vol. 65, No. 1, 2014, p. 503-510.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  65. Published

    Nanowires and nanotubes from π-conjugated organic materials fabricated by template wetting. / Bordo, Kirill; Schiek, Manuela; Rubahn, Horst-Günter.

    In: Applied Physics A, Vol. 114, No. 4, 2014, p. 1067-1074.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  66. Published
  67. Published

    Numerical Analysis of Scavenge Flow and convective heat transfer in Large Two-Stroke Marine Diesel Engines. / Sigurdsson, Eythor; Ingvorsen, Kristian Mark; Jensen, Michael Vincent; Mayer, S.; Matlok, S.; Walther, Jens Honore.

    In: Applied Energy, Vol. 123, 2014, p. 37-46.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  68. Published

    Numerical analysis of transport phenomena for designing of ejector in PEM forklift system. / Hosseinzadeh, Elham; Rokni, Masoud; Jabbari, Masoud; Mortensen, Henrik.

    In: International Journal of Hydrogen Energy, Vol. 39, No. 12, 2014, p. 6664-6674.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  69. Published

    Numerical and experimental investigation of bump foil mechanical behaviour. / Larsen, Jon Steffen; Cerda Varela, Alejandro Javier; Santos, Ilmar.

    In: Tribology International, Vol. 74, 2014, p. 46–56.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  70. Published

    Numerical simulation of cropping. / Tvergaard, Viggo; Hutchinson, John W.

    In: Journal of Applied Mechanics, Vol. 81, No. 7, 071002, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  71. Published

    On gear tooth stiffness evaluation. / Pedersen, Niels Leergaard; Jørgensen, Martin Felix.

    In: Computers & Structures, Vol. 135, 2014, p. 109-117.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  72. Published
  73. Published

    Optical role of randomness for structured surfaces. / Johansen, Villads Egede.

    In: Applied Optics, Vol. 53, No. 11, 2014, p. 2405-2415.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  74. Published

    Optimization of the overall energy consumption in cascade fueling stations for hydrogen vehicles. / Rothuizen, Erasmus Damgaard; Rokni, Masoud.

    In: International Journal of Hydrogen Energy, Vol. 39, No. 1, 2014, p. 582-592.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  75. Published

    Perceiving design as modelling: A cybernetic systems perspective. / Maier, Anja; Wynn, David C.; Howard, Thomas J.; Andreasen, Mogens Myrup.

    An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations. ed. / A. Chakrabarti; L.T.M. Blessing. Springer, 2014. p. 133-148.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2014

  76. Published

    Performance analysis of a Kalina cycle for a central receiver solar thermal power plant with direct steam generation. / Modi, Anish; Haglind, Fredrik.

    In: Applied Thermal Engineering, Vol. 65, No. 1-2, 2014, p. 201-208.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  77. E-pub ahead of print
  78. Published

    Potential for production of ‘mini-mussels’ in Great Belt (Denmark) evaluated on basis of actual and modeled growth of young mussels Mytilus edulis. / Riisgård, Hans Ulrik; Lundgreen, Kim; Larsen, Poul Scheel.

    In: Aquaculture International, 2014, p. 859-885.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  79. Published

    Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp. / Bell, Ian H.; Wronski, Jorrit; Quoilin, Sylvain; Lemort, Vincent.

    In: Industrial & Engineering Chemistry Research, Vol. 53, No. 6, 2014, p. 2498−2508.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  80. Published

    Self-organisation and motion in plants. / Lenau, Torben Anker (Invited author); Hesselberg, T. (Invited author).

    In: Proceedings of SPIE, the International Society for Optical Engineering, Vol. 9055, 90550F, 2014.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  81. Published

    Somatic growth of mussels Mytilus edulis in field studies compared to predictions using BEG, DEB, and SFG models. / Larsen, Poul Scheel; Filgueira, Ramón; Riisgård, Hans Ulrik.

    In: Journal of Sea Research, Vol. 88, 2014, p. 100-108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  82. Published

    Steam generated conversion coating on aluminium alloys. / Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan.

    2014. Abstract from AeroMat, Orlando, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  83. Published

    Strain Engineering of Kapitza Resistance in Few-Layer Graphene. / Chen, Jie; Walther, Jens Honore; Koumoutsakos, Petros.

    In: Nano Letters, Vol. 14, No. 2, 2014, p. 819–825.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  84. Published

    Stray capacitances in the watt balance operation: electrostatic forces : Paper. / Quagliotti, Danilo; Mana, G.

    In: Metrologia, Vol. 51, No. 2, 2014, p. S72-S79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  85. Published
  86. Published
  87. Published

    The 5 MW DeepWind floating offshore vertical wind turbine concept design - status and perspective. / Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Kragh, Knud Abildgaard; Nielsen, Per Hørlyk; Baran, Ismet; Ritchie, E.; Leban, K.M.; Svendsen, H.; Berthelsen, P.A.; Bussel, G.J.W.van ; Ferreira, C.S.; Chrysochoidis-Antsos, N.

    Proceedings - EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  88. Published

    The effect of dead time on randomly sampled power spectral estimates. / Buchhave, Preben; Velte, Clara Marika; George, William K.

    In: Experiments in Fluids, Vol. 55, No. 2, 1680, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  89. Published

    The missing link between the extensional dynamics of polymer melts and solutions. / Rasmussen, Henrik K.; Huang, Qian.

    In: Journal of Non-Newtonian Fluid Mechanics, Vol. 204, 2014, p. 1-6.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  90. Published

    Thermocline thermal storage systems for concentrated solar power plants: One-dimensional numerical model and comparative analysis. / Modi, Anish; Pérez-Segarra, Carlos David.

    In: Solar Energy, Vol. 100, 2014, p. 84-93.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  91. Published

    ThermoCycle: A Modelica library for the simulation of thermodynamic systems. / Quoilin, Sylvain; Desideri, Adriano; Wronski, Jorrit; Bell, Ian; Lemort, Vincent.

    Proceedings - 10th International Modelica Conference. Modelica Association, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  92. Published

    Thermodynamic analysis of an upstream petroleum plant operated on a mature fi eld. / Nguyen, Tuong-Van; Jacyno, Tomasz ; Breuhaus, Peter ; Voldsund, Mari ; Elmegaard, Brian.

    In: Energy, Vol. 68, 2014, p. 454-469.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  93. Published

    The start-up analysis of a PEM fuel cell system in vehicles. / Rabbani, Raja Abid; Rokni, Masoud; Hosseinzadeh, Elham; Mortensen, Henrik Hilleke.

    In: International Journal of Green Energy, Vol. 11, No. 1, 2014, p. 91-111.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  94. Published

    The Use of Modelling Methods for Product Configuration in Industrial Applications. / Hvam, Lars; Bonev, Martin; Haug, Anders ; Mortensen, Niels Henrik.

    Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014). ed. / T.D. Brunoe. Springer, 2014. p. 529-539 (Lecture Notes in Production Engineering).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  95. Published
  96. Published

    Topology optimization of fail-safe structures using a simplified local damage model. / Jansen, Miche; Lombaert, Geert; Schevenels, Mattias; Sigmund, Ole.

    In: Structural and Multidisciplinary Optimization, Vol. 49, No. 4, 2014, p. 657-666.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  97. Published
  98. Published

    Tuned mass absorber on a flexible structure. / Krenk, Steen; Høgsberg, Jan Becker.

    In: Journal of Sound and Vibration, Vol. 333, No. 6, 2014, p. 1577-1595.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  99. Published

    Visualizing Research Data Records for their Better Management. / Ball, Alexander; Darlington, Mansur; Howard, Thomas J.; McMahon, Chris; Culley, Steve.

    In: Journal of Digital Information, Vol. 13, No. 1, 2014, p. 83-93.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  100. Published

    Wind turbine condition monitoring based on SCADA data using normal behavior models : Part 2: Application examples. / Schlechtingen, Meik; Santos, Ilmar.

    In: Applied Soft Computing, Vol. 14, 2014, p. 447-460.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  101. 2013
  102. Published

    2nd Generation Alkaline Electrolysis : Final report. / Yde, Lars; Kjartansdóttir, Cecilia Kristin; Allebrod, Frank; Mogensen, Mogens Bjerg; Møller, Per; Hilbert, Lisbeth R.; Nielsen, Peter Tommy; Mathiesen, Troels; Jensen, Jørgen; Andersen, Lars; Dierking, Alexander.

    Århus University Business and Social Science – Centre for Energy Technologies, 2013. 72 p.

    Publication: ResearchReport – Annual report year: 2013

Previous 1 2 3 4 5 6 7 8 ...47 Next
Download list: To download, please limit the number of search results to 1,000 or less.