Composits and Materials Mechanics

1 - 63 out of 63Page size: 500
RSS feed of this list
Sort by: Publication year
  1. 2013
  2. Published

    2D micromechanical analysis of SiC/Al metal matrix composites under tensile, shear and combined tensile/shear loads. / Qing, Hai.

    In: Materials & Design, Vol. 51, 2013, p. 438-447.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  3. Published

    Adhesion improvement of glass-fibre-reinforced polyester composites by gliding arc discharge treatment. / Kusano, Yukihiro; Sørensen, Bent F.; Løgstrup Andersen, Tom; Leipold, Frank.

    In: Journal of Adhesion, Vol. 89, 2013, p. 433-459.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  4. Published

    A new theoretical model of the quasistatic single-fiber pullout problem: Analysis of stress field. / Qing, Hai.

    In: Mechanics of Materials, Vol. 60, 2013, p. 66-79.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  5. Published

    Application for Wind Turbine Blades. / McGugan, Malcolm.

    In: New Trends in Structural Health Monitoring. ed. / Wieslaw Ostachowicz; Alfredo Güemes . Springer, 2013. p. 373-427 (International Centre for Mechanical Sciences. Courses and Lectures, Vol. 542).

    Publication: Research - peer-review › Book chapter – Annual report year: 2013

  6. Accepted

    Are reactive thermoplastic polymers suitable for future wind turbine composite materials blades?. / Raghavalu Thirumalai, Durai Prabhakaran.

    In: Mechanics of Advanced Materials and Structures, 2013.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  7. Published

    Determination of the minimum size of a statistical representative volume element from a fibre-reinforced composite based on point pattern statistics. / Hansen, Jens Zangenberg; Brøndsted, Povl.

    In: Scripta Materialia, Vol. 68, 2013, p. 503-505.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  8. Published

    Influence of Temperature on Mechanical Properties of Jute/Biopolymer Composites. / Løvdal, Alexandra ; Laursen, Louise Løcke; Løgstrup Andersen, Tom; Madsen, Bo; Mikkelsen, Lars Pilgaard.

    In: Journal of Applied Polymer Science, Vol. 128, No. 3, 2013, p. 2038-2045.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  9. Published

    Interface debond crack growth in tension–tension cyclic loading of single fiber polymer composites. / Pupurs, Andrejs; Goutianos, Stergios; Brøndsted, Povl; Varna, Janis.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 44, 2013, p. 86-94.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  10. E-pub ahead of print

    Life cycle strain monitoring in glass fibre reinforced polymer laminates using embedded fibre Bragg grating sensors from manufacturing to failure. / Nielsen, Michael Wenani; Schmidt, Jacob Wittrup; Høgh, Jacob Herold; Waldbjørn, Jacob Paamand; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Markussen, Christen Malte.

    In: Journal of Composite Materials, 2013, p. 1-17.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  11. Published

    Martensitic transformations in nanostructured nitinol: Finite element modeling of grain size and distribution effects. / Liu, Hong-Sheng; Mishnaevsky, Leon.

    In: Computational Materials Science, Vol. 76, 2013, p. 27-36.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  12. Published

    Monitoring debond crack propagation and pullouts for a composite interface – Pullout tests. / Raghavalu Thirumalai, Durai Prabhakaran; Sørensen, Bent F.; Lilholt, Hans; McGugan, Malcolm.

    In: Proceedings of 12th Deformation and Fracture of Composites (DFC-12) & 6th Structural Integrity and Multi-scale Modelling (SI-6). 2013.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

  13. Published

    Optical diagnostics of a gliding arc. / Sun, Z.W.; Zhu, J.J.; Li, Z.S.; Aldén, M.; Leipold, Frank; Salewski, Mirko; Kusano, Yukihiro.

    In: Optics Express, Vol. 21, No. 5, 2013, p. 6028-6044.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  14. Published

    Pretreatment of the macroalgae Chaetomorpha linum for the production of bioethanol - Comparison of five pretreatment technologies. / Schultz-Jensen, Nadja; Thygesen, Anders; Thomsen, Sune Tjalfe; Leipold, Frank; Roslander, Christian; Lilholt, Hans; Bjerre, Anne Belinda.

    In: Bioresource Technology, Vol. 140, 2013, p. 36-42.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  15. Published

    Quantitative study on the statistical properties of fibre architecture of genuine and numerical composite microstructures. / Hansen, Jens Zangenberg; Brøndsted, Povl.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 47, 2013, p. 124-134.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  16. Published

    Secundary stress effects during load introduction into undirectional composite test coupons. / Mikkelsen, Lars Pilgaard; Bech, Jakob Ilsted.

    In: 6th International Conference on Composites Testing and Model Identification. ed. / O.T. Thomsen; Bent F. Sørensen; Christian Berggreen. 2013.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2013

  17. Published

    Surface modification of nanofibrillated cellulose films by atmospheric pressure dielectric barrier discharge. / Siró, Istvan; Kusano, Yukihiro; Norrman, Kion; Goutianos, Stergios; Plackett, David.

    In: Journal of Adhesion Science and Technology, Vol. 27, No. 3, 2013, p. 294-308.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  18. Submitted

    Tensile and compression properties of hybrid composites – A comparative study. / Raghavalu Thirumalai, Durai Prabhakaran; Løgstrup Andersen, Tom; Markussen, Christen Malte; Madsen, Bo; Lilholt, Hans.

    In: Proceedings of the 19th International Conference on Composite Materials (ICCM19). 2013.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

  19. Published

    Ultrasound enhanced 50 Hz plasma treatment of glass-fiber-reinforced polyester at atmospheric pressure. / Kusano, Yukihiro; Norrman, Kion; Singh, Shailendra Vikram; Leipold, Frank; Morgen, P.; Bardenshtein, A.; Krebs, N.

    In: Journal of Adhesion Science and Technology, Vol. 27, No. 7, 2013, p. 825–833.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  20. Published

    Uncertainty modelling and code calibration for composite materials. / Toft, Henrik Stensgaard; Branner, Kim; Mishnaevsky, Leon, Jr; Sørensen, John Dalsgaard.

    In: Journal of Composite Materials, Vol. 47, No. 14, 2013, p. 201729-1747.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  21. Published

    Water-cooled non-thermal gliding arc for adhesion improvement of glass-fibre-reinforced polyester. / Kusano, Yukihiro; Sørensen, Bent F.; Løgstrup Andersen, Tom; Toftegaard, Helmuth Langmaack; Leipold, Frank; Salewski, Mirko; Sun, Zhiwei; Zhu, Jiajian; Li, Zhongshan; Alden, Marcus.

    In: Journal of Physics D: Applied Physics, Vol. 46, No. 13, 2013, p. 135203.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  22. Published

    Wood versus plant fibers: Similarities and differences in composite applications. / Madsen, Bo; Gamstedt, E. Kristofer.

    In: Advances in Materials Science and Engineering, Vol. 2013, 2013, p. 564346.

    Publication: Research - peer-review › Journal article – Annual report year: 2013

  23. 2012
  24. Published

    A Pull-out Test for Determining Interface Properties Between Steel Fibre and Polyester: A Micromechanical Model and New Experimental Technique. / Raghavalu Thirumalai, Durai Prabhakaran; Løgstrup Andersen, Tom; Lilholt, Hans; Sørensen, Bent F.

    In: Proceedings of the International conference on Composite Interfaces. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  25. Published

    Attribute Based Selection of Thermoplastic Resin for Vacuum Infusion Process: A Decision Making Methodology. / Raghavalu Thirumalai, Durai Prabhakaran; Lystrup, Aage; Løgstrup Andersen, Tom.

    In: Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering. ed. / J. Paulo Davim. IGI global, 2012. p. 267-288.

    Publication: Research - peer-review › Book chapter – Annual report year: 2012

  26. Published

    Ballistic performance of micro- and nanostructured aluminium sheets. / Toftegaard, Helmuth Langmaack; Huang, Xiaoxu; Holm, J.; Hansen, Niels.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 33, 2012, p. 355-364.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  27. Published

    Challenges Testing Composite Materials for Wind Turbine Blades. / Brøndsted, Povl; Mikkelsen, Lars Pilgaard.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 33-34.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  28. Published

    Characterisation of Flax Fibres and Flax Fibre Composites. Being cellulose based sources of materials. / Aslan, Mustafa; Sørensen, Bent F. (Supervisor); Madsen, Bo (Supervisor).

    DTU Wind Energy, 2012. 168 p. (DTU Wind Energy E; No. 0005).

    Publication: Research › Ph.d. thesis – Annual report year: 2012

  29. Published

    Composite materials for wind energy applications: micromechanical modeling and future directions. / Mishnaevsky, Leon.

    In: Computational Mechanics, Vol. 50, No. 2, 2012, p. 195-207.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  30. Published

    Determination of the J integral for laminated double cantilever beam specimens: The curvature approach. / Rask, Morten; Sørensen, Bent F.

    In: Engineering Fracture Mechanics, Vol. 96, 2012, p. 37-48.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  31. Published

    Development of Trailing Edge Flap Technology at DTU Wind. / Aagaard Madsen , Helge (Invited author); Beller, Christina (Author); Løgstrup Andersen, Tom (Author).

    2012. Sandia National Laboratories 2012 Wind Turbine Blade Workshop, United States, 29-05-12.

    Publication: Research › Sound/Visual production (digital) – Annual report year: 2012

  32. Published

    European Wind Energy - Development Trends and Implications for Wind Turbine Blade Design and Materials Selection. / Sørensen, Bent F.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 4-5.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  33. Published

    Experimental Determination and Numerical Modelling of Process Induced Strains and Residual Stresses in Thick Glass/Epoxy Laminate. / Nielsen, Michael Wenani; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Branner, Kim; Nielsen, Per Hørlyk.

    In: ECCM15 - 15th European Conference On Composite Materials. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  34. Published

    Failure analysis of steel/polyester composites - compression properties. / Raghavalu Thirumalai, Durai Prabhakaran; Mikkelsen, Lars Pilgaard; Lilholt, Hans.

    In: Mechanics of Functional Materials and Structures. Proceedings of 3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012). Indian Institute of Technology , 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  35. Published

    Fatigue damage propagation in unidirectional glass fibre reinforced composites. / Hansen, Jens Zangenberg; Alzamora Guzman, Vladimir Joel; Østergaard, R.C.; Brøndsted, Povl.

    In: ECCM15 - 15th European Conference On Composite Materials. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

  36. Published

    Flexural Properties of Hybrid Natural Composite-Micromechanics and Experimental Assessment. / Raghavalu Thirumalai, Durai Prabhakaran; Madsen, Bo; Toftegaard, Helmuth Langmaack; Markussen, Christen Malte.

    In: Mechanics of Functional Materials and Structures. Proceedings of 3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2912). Indian Institute of Technology , 2012. p. 469-472.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  37. Published

    Future Materials for Wind Turbine Blades - A Critical Review. / Raghavalu Thirumalai, Durai Prabhakaran.

    In: Proceedings of the International Conference on Wind Energy: Materials, Engineering and Policies (WEMEP-2012). 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  38. Published

    Future Perspectives and Challenges of Thermoplastic Wind Blades. / Raghavalu Thirumalai, Durai Prabhakaran.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 7-8.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  39. Published

    Hemp yarn reinforced composites – III. Moisture content and dimensional changes. / Madsen, Bo; Hoffmeyer, Preben; Lilholt, Hans.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 43, No. 11, 2012, p. 2151-2160.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  40. Published

    Influence of ultrasonic irradiation on ozone generation in a dielectric barrier discharge. / Kusano, Yukihiro; Drews, J.; Leipold, Frank; Fateev, Alexander; Bardenshtein, A.; Krebs, N.

    In: Journal of Physics: Conference Series (Online), Vol. 406, No. 1, 2012, p. 012006.

    Publication: Research - peer-review › Conference article – Annual report year: 2012

  41. E-pub ahead of print

    In situ measurement using FBGs of process-induced strains during curing of thick glass/epoxy laminate plate : experimental results and numerical modelling. / Nielsen, Michael Wenani; Schmidt, Jacob Wittrup; Hattel, Jesper Henri; Løgstrup Andersen, Tom; Markussen, Christen Malte.

    In: Wind Energy, 2012.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  42. Published

    In situ observations of microscale damage evolution in unidirectional natural fibre composites. / Rask, Morten; Madsen, Bo; Sørensen, Bent F.; Fife, Julie L.; Martyniuk, Karolina; Lauridsen, Erik Mejdal.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 43, No. 10, 2012, p. 1639-1649.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  43. Published

    Manufacturing Techniques for Wind Turbine Blades - Present State of the Vacuum Infusion Process. / Markussen, Christen Malte.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 11-12.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  44. Published

    Material Selection and Design Aspects of Small Wind Turbine Blades. / Mikkelsen, Lars Pilgaard; Bottoli, F.; Pignatti, L.; Løgstrup Andersen, Tom; Madsen, Bo.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 15-16.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  45. Published

    Measuring the stress field around an evolving crack in tensile deformed Mg AZ31 using three-dimensional X-ray diffraction. / Oddershede, Jette; Camin, Bettina; Schmidt, Søren; Mikkelsen, Lars Pilgaard; Sørensen, Henning Osholm; Lienert, Ulrich; Poulsen, Henning Friis; Reimers, Walter.

    In: Acta Materialia, Vol. 60, 2012, p. 3570-3580.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  46. Published

    Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure. / Hänninen, Tuomas; Thygesen, Anders; Mehmood, Shahid; Madsen, Bo; Hughes, Mark.

    In: Industrial Crops and Products, Vol. 39, 2012, p. 7-11.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  47. Published

    Methodology for characterisation of glass fibre composite architecture. / Hansen, Jens Zangenberg; Larsen, J.B.; Østergaard, R.C.; Brøndsted, Povl.

    In: Plastics, Rubber & Composites, Vol. 41, No. 4/5, 2012, p. 187-193.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  48. Published

    Micromechanical analysis of nanocomposites using 3D voxel based material model. / Mishnaevsky, Leon.

    In: Composites Science and Technology, Vol. 72, No. 10, 2012, p. 1167-1177.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  49. Published

    Micromechanics of hierarchical materials : A brief overview. / Mishnaevsky, Leon, Jr.

    In: Reviews on Advanced Materials Science, Vol. 30, No. 1, 2012, p. 60-72.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  50. Published

    Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus. / Peng, R.D.; Zhou, H.W.; Wang, H.W.; Mishnaevsky, Leon, Jr.

    In: Computational Materials Science, Vol. 60, 2012, p. 19-31.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  51. Published

    Natural composites: Strength, packing ability and moisture sorption of cellulose fibres, and the related performance of composites. / Lilholt, Hans; Madsen, Bo.

    In: Proceedings of the International Conference on Wind Energy: Materials, Engineering and Policies (WEMEP-2012). 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  52. Published

    Path dependence of truss-like mixed mode cohesive laws. / Goutianos, Stergios; Sørensen, Bent F.

    In: Engineering Fracture Mechanics, Vol. 91, 2012, p. 117-132.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  53. Published

    Properties and performance of flax yarn/thermoplastic polyester composites. / Madsen, Bo; Mehmood, Shahid.

    In: Journal of Reinforced Plastics & Composites, Vol. 31, No. 24, 2012, p. 1746–1757.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  54. Published

    Strength and failure modes of ceramic multilayers. / Sørensen, Bent F.; Toftegaard, Helmuth Langmaack; Linderoth, Søren; Lundberg, Mats; Feih, Stefanie.

    In: European Ceramic Society. Journal, Vol. 32, No. 16, 2012, p. 4165-4176.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  55. Published

    Surface charging, discharging and chemical modification at a sliding contact. / Singh, Shailendra Vikram; Kusano, Yukihiro; Morgen, Per; Michelsen, Poul.

    In: Journal of Applied Physics, Vol. 111, No. 8, 2012, p. 083501.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  56. Published

    Test Methods for Assessing Bimaterial Interfaces in Wind Turbine Blades. / Sørensen, Bent F.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 35-36.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  57. Published

    The effect of O2 in a humid O2/N2/NOx gas mixture on NOx and N2O remediation by an atmospheric pressure dielectric barrier discharge. / Teodoru, Steluta; Kusano, Yukihiro; Bogaerts, Annemie.

    In: Plasma Processes and Polymers, Vol. 9, 2012, p. 652-689.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  58. Published

    The Influence of Steel Fiber Plasticity on Kink-Band Formation. / Mikkelsen, Lars Pilgaard; Raghavalu Thirumalai, Durai Prabhakaran.

    In: Proceedings of XXIII International Congress on Theoretical and Applied Mechanics. 2012.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  59. Published

    Ultrasound enhanced plasma surface modification at atmospheric pressure. / Kusano, Yukihiro; Singh, Shailendra Vikram; Norrman, Kion; Drews, Joanna Maria; Leipold, Frank; Rozlosnik, Noemi; Bardenshtein, A.; Krebs, N.

    In: Surface Engineering, Vol. 28, 2012, p. 453-457.

    Publication: Research - peer-review › Journal article – Annual report year: 2012

  60. Published

    Wind Turbines – An Enabling Application for Structural Health Monitoring?. / McGugan, Malcolm.

    In: Abstracts. Indo-Danish Workshop On Future Composites Technologies for Wind Turbine Blades. 2012. p. 45-46.

    Publication: Research - peer-review › Conference abstract in proceedings – Annual report year: 2012

  61. 2011
  62. Published

    50-Hz plasma treatment of glass fibre reinforced polyester at atmospheric pressure enhanced by ultrasonic irradiation. / Kusano, Yukihiro; Norrman, Kion; Singh, Shailendra Vikram; Leipold, Frank; Morgen, P.; Bardenshtein, A.; Krebs, N.

    In: Proceedings of the 30th International Conference on Phenomena in Ionized Gases. 2011. p. D13.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

  63. Published

    Adhesion improvement of glass fibre reinforced polyester composite by atmospheric pressure plasma treatment. / Kusano, Yukihiro; Løgstrup Andersen, Tom; Sørensen, Bent F.; Rozlosnik, Noemi; Mortensen, H.; Teodoru, Steluta; Kingshott, Peter; Leipold, Frank; Singh, Shailendra Vikram; Bilde-Sørensen, Jørgen; Brøndsted, Povl; Michelsen, Poul; Bindslev, Henrik; Bardenshtein, Alexander; Krebs, N.

    In: Fiber-reinforced composites. Nova Science Publishers, Incorporated, 2011.

    Publication: Research - peer-review › Book chapter – Annual report year: 2012

  64. Published

    Generation and Applications of Atmospheric Pressure Plasmas. / Kogoma, Masuhiro; Kusano, Masako; Kusano, Yukihiro.

    Nova Science Publishers, Incorporated, 2011. (Physics Research and Technology).

    Publication: Research - peer-review › Book – Annual report year: 2012

  65. Published

    Hip supporting device. / Brøndsted, Povl (Inventor); Kot, Katrine Kirkeskov (Inventor).

    IPC No.: A61F5/01. Nov 24, 2011.

    Publication: Research › Patent – Annual report year: 2011

  66. 2006
  67. Published

    Measuring Cohesive Laws for Interfaces in Sandwich Structures. / Lundsgaard-Larsen, Christian; Sørensen, Bent F.; Berggreen, Carl Christian; Østergaard, Rasmus Christian.

    In: Polymer Composite Materials for Wind Power Turbines. ed. / H. Lilholt; B. Madsen; T.L. Andersen; L.P. Mikkelsen; A. Thygesen. Roskilde, Denmark : Risø National Laboratory, 2006. p. 223-230.

    Publication: Research - peer-review › Article in proceedings – Annual report year: 2006

Anker Engelunds Vej 1Building 101A2800 Kgs. LyngbyTel +45 45 25 25 25VAT 30 06 09 46EAN