Composites and Materials Mechanics

  1. 2016
  2. Published

    Apparent interfacial shear strength of short-flax-fiber/starch acetate composites. / Andersons, J.; Modniks, J.; Joffe, R.; Madsen, Bo; Nättinen, K.

    In: International Journal of Adhesion and Adhesives, Vol. 64, 2016, p. 78-85.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  3. Published
  4. Published

    Fracture resistance enhancement of layered structures by multiple cracks. / Goutianos, Stergios; Sørensen, Bent F.

    In: Engineering Fracture Mechanics, Vol. 151, 2016, p. 92-108.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  5. Published

    Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. / Korkiakoski, Samuli; Brøndsted, Povl; Sarlin, Essi; Saarela, Olli.

    In: International Journal of Fatigue, Vol. 85, 2016, p. 114-129.

    Publication: Research - peer-reviewJournal article – Annual report year: 2016

  6. Published
  7. Published

    Matrices for natural fiber composites. / Dominguez, Juan Carlos; Oliet, Mercedes; Alonso, María Virginia; Madsen, Bo.

    Natural Fiber Composites. ed. / R.D.S.G. Campilho. C R C Press LLC, 2016. p. 93-126.

    Publication: Research - peer-reviewBook chapter – Annual report year: 2016

  8. Published
  9. 2015
  10. Published

    A morphing trailing edge flap system for wind turbine blades. / Aagaard Madsen , Helge; Barlas, Athanasios; Løgstrup Andersen, Tom.

    Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2015). ed. / A.L. Araújo; C.A. Mota Soares. IDMEC, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  11. Published

    Assessment Report on Innovative Rotor Blades (MAREWINT WP1,D1.3). / McGugan, Malcolm; Leble, Vladimir ; Pereira, Gilmar Ferreira.

    DTU Wind Energy, 2015. 42 p. (DTU Wind Energy E; No. 0096).

    Publication: Research - peer-reviewReport – Annual report year: 2015

  12. Published
  13. Published

    Carbon nanotube reinforced metal binder for diamond cutting tools. / Sidorenko, Daria; Mishnaevsky, Leon; Levashov, Evgeny; Loginov, Pavel; Petrzhik, Mikhail.

    In: Materials & Design, Vol. 83, 2015, p. 536-544.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  14. Published

    Characterization and biological depectinization of hemp fibers originating from different stem sections. / Liu, Ming; Fernando, Dinesh; Meyer, Anne S.; Madsen, Bo; Daniel, Geoffrey; Thygesen, Anders.

    In: Industrial Crops and Products, Vol. 76, 2015, p. 880-891.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  15. Published
  16. Published
  17. Published

    Crack Growth Monitoring by Embedded Optical Fibre Bragg Grating Sensors: Fibre Reinforced Plastic Crack Growing Detection. / Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm.

    Proceedings of OSENS 2015 - Special Session on Optical Sensors at Photooptics 2015. 2015. p. 133-139.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  18. Published

    Crack growth monitoring in composite materials using embedded optical Fiber Bragg Grating sensor. / Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm.

    Proceedings of the 5th International Conference on Smart Materials and Nanotechnology in Engineering (SMN) in conjunction with the International Conference on Smart Materials and Structures (Cansmart 2015). 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  19. Published
  20. Published

    Damage tolerant design and condition monitoring of composite material and bondlines in wind turbine blades: Failure and crack propagation. / Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm.

    Proceedings of EWEA Offshore 2015 Conference. European Wind Energy Association (EWEA), 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  21. Published

    Damage tolerant design and condition monitoring of composite material and bondlines in wind turbine blades: Failure and crack propagation. / Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm.

    2015. Poster session presented at EWEA Offshore 2015 Conference, Copenhagen, Denmark.

    Publication: ResearchPoster – Annual report year: 2015

  22. Published

    Delamination fractures in composite materials. / Sørensen, Bent F.

    Modelling Damage, Fatigue and Failure of Composite Materials. ed. / Ramesh Talreja; Janis Varna. Woodhead Publishing, 2015. p. 213-240 (Woodhead Publishing Series in Composites Science and Engineering).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2015

  23. Published
  24. Published

    Development of new biomass-based furan/glass composites manufactured by the double-vacuum-bag technique. / Dominguez, Juan Carlos; Madsen, Bo.

    In: Journal of Composite Materials, Vol. 49, No. 24, 2015, p. 2993-3003.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  25. Published

    Diamond and cBN hybrid and nanomodified cutting tools with enhanced performance: Development, testing and modelling. / Loginov, Pavel; Mishnaevsky, Leon; Levashov, Evgeny; Petrzhik, Mikhail.

    In: Materials & Design, Vol. 88, 2015, p. 310-319.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  26. Published

    Dictionary Based Segmentation in Volumes. / Emerson, Monica Jane; Jespersen, Kristine Munk; Jørgensen, Peter Stanley; Larsen, Rasmus; Dahl, Anders Bjorholm.

    Image Analysis: 19th Scandinavian Conference, SCIA 2015 Copenhagen, Denmark, June 15–17, 2015 Proceedings. Springer Science+Business Media B.V., 2015. p. 504-515 (Lecture Notes in Computer Science).

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  27. Published

    DTU-ESA millimeter-wave VAlidation STandard antenna (mm-VAST) - detailed design. / Kim, Oleksiy S.; Pivnenko, Sergey; Breinbjerg, Olav; Jørgensen, Rolf; Larsen, Niels Vesterdal; Branner, Kim; Berring, Peter; Markussen, Christen Malte; Paquay, Maurice.

    Proceedings of 9th European Conference on Antennas and Propagation . IEEE, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  28. Published

    DTU-ESA millimeter-wave validation standard antenna (mm-vast) – performance verification. / Pivnenko, Sergey; Kim, Oleksiy S.; Breinbjerg, Olav; Jørgensen, R.; Vesterdal, N.; Branner, Kim; Berring, Peter; Markussen, Christen Malte; Paquay, M.

    Proceedings of 36th ESA Antenna Workshop on Antennas and RF Systems for Space Science.. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  29. Published
  30. Published
  31. Published

    Effects of moisture on glass fiber-reinforced polymer composites. / Alzamora Guzman, Vladimir Joel; Brøndsted, Povl.

    In: Journal of Composite Materials, Vol. 49, No. 8, 2015, p. 911-920.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  32. Published

    Elastocaloric cooling device: Materials and modeling. / Tusek, Jaka; Engelbrecht, Kurt; Pryds, Nini; Mikkelsen, Lars Pilgaard.

    SMST 2015: The Model for Shape Memory Application, Proceedings of the Shape Memory and Superelastic Technologies Conference. ASM International, 2015. p. 145-146.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2015

  33. Published

    Elastocaloric effect of Ni-Ti wire for application in a cooling device. / Tusek, Jaka; Engelbrecht, Kurt; Mikkelsen, Lars Pilgaard; Pryds, Nini.

    In: Journal of Applied Physics, Vol. 117, No. 12, 124901, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  34. Published
  35. Published

    Fatigue behaviour of uni-directional flax fibre/epoxy composites. / Ueki, Yosuke ; Lilholt, Hans; Madsen, Bo.

    Proceedings of the 20th International Conference on Composite Materials. ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  36. Published

    Fatigue damage evolution in fibre composites for wind turbine blades. / Jespersen, Kristine Munk; Lowe, Tristan; Withers, Philip J.; Mikkelsen, Lars Pilgaard.

    2015. Poster session presented at Fracture Mechanics for Laminated Composite Structures, Aalborg, Denmark.

    Publication: Research - peer-reviewPoster – Annual report year: 2015

  37. Published

    Fatigue life in textile composites used for wind energy engineering. / Zangenberg, Jens ; Brøndsted, Povl.

    Fatigue of Textile Composites. ed. / V. Carvelli; S.V. Lomov. Woodhead Publishing, 2015. p. 403-440 (Woodhead Publishing Series in Composites Science and Engineering).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2015

  38. Published

    Finite Element Verification of Non-Homogeneous Strain and Stress Fields during Composite Material Testing. / Mikkelsen, Lars Pilgaard.

    2015 Simulia Community Conference Proceedings.. 2015. p. 509–519.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  39. Published
  40. Published

    From Measurements Errors to a New Strain Gauge Design. / Mikkelsen, Lars Pilgaard; Zike, Sanita; Salviato, Marco; Gili, Jacopo .

    Proceedings of 20th International Conference on Composite Materials. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  41. Published

    From measurements errors to a new strain gauge design for composite materials. / Mikkelsen, Lars Pilgaard; Salviato, Marco; Gili, Jacopo .

    Proceedings of the 20th International Conference on Composite Materials. ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  42. Published

    Generation of non-overlapping fiber architecture. / Chapelle, Lucie; Lévesque, M. ; Brøndsted, Povl; Foldschack, M. R. ; Kusano, Yukihiro.

    Proceedings of the 20th International Conference on Composite Materials. ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  43. Published

    Identification of true microstructure of composites based on various flax fibre assemblies by means of three-dimensional tomography. / Miettinen, Arttu; Joffe, Roberts; Pupure, Liva ; Madsen, Bo.

    Proceedings of the 20th International Conference on Composite Materials. ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  44. Published

    Impact of non-hookean behaviour on mechanical performance of hybrid composites. / Markussen, Christen Malte; Madsen, Bo; Lilholt, Hans; Løgstrup Andersen, Tom.

    Proceedings of the 20th International Conference on Composite Materials. ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  45. Published

    Low temperature annealing of cold-drawn pearlitic steel wire. / Zhang, Xiaodan; Bech, Jakob Ilsted; Hansen, Niels.

    In: I O P Conference Series: Materials Science and Engineering, Vol. 89, 012058, 2015.

    Publication: Research - peer-reviewConference article – Annual report year: 2015

  46. Published

    Measurements of 3D slip velocities and plasma column lengths of a gliding arc discharge. / Zhu, Jiajian; Gao, Jinlong ; Ehn, Andreas; Aldén, Marcus; Li, Zhongshan; Moseev, Dmitry; Kusano, Yukihiro; Salewski, Mirko; Alpers, Andreas; Gritzmann, Peter; Schwenk, Martin .

    In: Applied Physics Letters, Vol. 106, 044101, 2015.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  47. Published

    Mechanical Characterization and Fractography of Glass Fiber/Polyamide (PA6) Composites. / Raghavalu Thirumalai, Durai Prabhakaran; Pillai, Saju; Charca, Samuel; Oshkovr, Simin A. ; Knudsen, Hans; Løgstrup Andersen, Tom; Bech, Jakob Ilsted; Thybo Thomsen, Ole; Lilholt, Hans.

    In: Polymer Composites, Vol. 36, No. 5, 2015, p. 834–853.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  48. Published

    Micromechanical Investigation of Fatigue Damage in Uni-Directional Fibre Composites. / Jespersen, Kristine Munk; Zangenberg Hansen, Jens ; Mikkelsen, Lars Pilgaard.

    Proceedings of 6th International Conference on Fatigue of Composite. 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  49. Published

    Micromechanical modelling of nanocrystalline and ultrafine grained metals: A short overview. / Mishnaevsky, Leon; Levashov, Evgeny.

    In: Computational Materials Science, Vol. 96, 2015, p. 365-373.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  50. Published

    Micromechanical Time-Lapse X-ray CT Study of Fatigue Damage in Uni-Directional Fibre Composites. / Jespersen, Kristine Munk; Lowe, Tristan; Withers, Philip J.; Zangenberg Hansen, Jens ; Mikkelsen, Lars Pilgaard.

    Proceedings of the 20th International Conference on Composite Materials (ICCM20). ICCM20 Secretariat, 2015.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2015

  51. Published

    Micro-Scale Experiments and Models for Composite Materials with Materials Research. / Zike, Sanita; Mikkelsen, Lars Pilgaard (Supervisor); Sørensen, Bent F. (Supervisor); Tvergaard, Viggo (Supervisor).

    DTU Wind Energy, 2015. 152 p. (DTU Wind Energy PhD; No. 0050(EN)).

    Publication: ResearchPh.D. thesis – Annual report year: 2015

  52. Published

    Modelling Compression of Uni-Directional Composite Materials. / Mikkelsen, Lars Pilgaard; Koutsos, Spyridon T.

    Proceedings of NAFEMS Nordic Seminar: Simulating Composite Materials and Structures. NAFEMS, 2015.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2015

Previous 1 2 3 4 5 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word