Composits and Materials Mechanics

  1. 2015
  2. Published
  3. Published

    Micromechanical modelling of nanocrystalline and ultrafine grained metals: A short overview. / Mishnaevsky, Leon; Levashov, Evgeny.

    In: Computational Materials Science, Vol. 96, 2015, p. 365-373.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  4. Published

    Nanostructured interfaces for enhancing mechanical properties of composites: Computational micromechanical studies. / Mishnaevsky, Leon.

    In: Composites Part B: Engineering, Vol. 68, 2015, p. 75-84.

    Publication: Research - peer-reviewJournal article – Annual report year: 2015

  5. 2014
  6. Published

    3D X-Ray Computed Tomography (XCT) of Fatigue Damage Evolution in UD Glass Fibre Composite. / Jespersen, Kristine Munk; Lowe, Tristan; Withers, Philip; Mikkelsen, Lars Pilgaard.

    2014. Poster session presented at DTU Energy Conversion 2nd International PhD Summer School, Hundested, Denmark.

    Publication: ResearchPoster – Annual report year: 2014

  7. Published

    A Critical Review of Future Materials for Wind Turbine Blades. / Raghavalu Thirumalai, Durai Prabhakaran.

    In: International Journal of Materials Engineering Innovation, Vol. 5, No. 2, 2014, p. 81-99.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  8. Published

    Altered Biomechanics of a Perthes' Hip Investigated by Contact Modeling. / Salmingo, Remel A.; Skytte, T. L. ; Traberg, Marie Sand; Mikkelsen, Lars Pilgaard; Henneberg, Kaj-Åge; Wong, C.

    2014. Abstract from 7th World Congress of Biomechanics, Boston, MA, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  9. Published

    Analysis of glass fibre sizing. / Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl; Almdal, Kristoffer.

    Proceedings of the 28th International Conference on Surface Modification Technologies. 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  10. Published
  11. Published

    Atmospheric Pressure Plasma Processing for Polymer Adhesion: A Review. / Kusano, Yukihiro.

    In: Journal of Adhesion, Vol. 90, No. 9, 2014, p. 755-777.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  12. Published

    Biaxial stretching of poly(L-lactide) tubes for improvement of mechanical properties. / Løvdal, Alexandra Liv Vest; Andreasen, Jens Wenzel; Mikkelsen, Lars Pilgaard; Agersted, Karsten; Almdal, Kristoffer.

    Book of abstracts: 26th European Conference on Biomaterials. 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  13. Published

    Chemorheological study of a polyfurfuryl alcohol resinsystem — Pre-gel curing stage. / Dominguez, J.C.; Madsen, Bo.

    In: Industrial Crops and Products, Vol. 52, 2014, p. 321– 328.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. Published

    Composite recycling: Characterizing end of life wind turbine blade material. / Beauson, Justine; Bech, Jakob Ilsted; Brøndsted, Povl.

    Proceedings of 19th International Conference on Composite Materials. 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  15. Published

    Consequence of reduced necrotic bone elastic modulus in a Perthes' hip. / Salmingo, Remel A.; Skytte, Tina Lercke; Mikkelsen, Lars Pilgaard; Henneberg, Kaj-Åge; Wong, Christian.

    2014. Abstract from Nordic Orthopaedic Federation Congress 2014, Helsinki, Finland.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  16. Published

    Correction of Gauge Factor for Strain Gauges Used in Polymer Composite Testing. / Zike, Sanita; Mikkelsen, Lars Pilgaard.

    In: Experimental Mechanics, Vol. 54, No. 3, 2014, p. 393-403.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  17. Published

    Damage evolution under cyclic multiaxial stress state: A comparative analysis between glass/epoxy laminates and tubes. / Quaresimin, M.; Carraro, P.A.; Mikkelsen, Lars Pilgaard; Lucato, N.; Vivian, L.; Brøndsted, Povl; Sørensen, Bent F.; Varna, J.; Talreja, R.

    In: Composites Part B: Engineering, Vol. 61, 2014, p. 282–290.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Published

    Damage tolerant design: failure and crack propagation in composites. / Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm.

    Proceedings of 10th EAWE PhD Seminar on Wind Energy in Europe. European Academy of Wind Energy, 2014. p. 1-5.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  19. Published

    Design of a fibrous composite preform for wind turbine rotor blades. / Hansen, Jens Zangenberg; Brøndsted, Povl; Kofoed, M.

    In: Materials & Design, Vol. 56, 2014, p. 635-641.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  20. Published

    DTU-ESA millimeter-wave validation standard antenna – requirements and design. / Pivnenko, Sergey; Kim, Oleksiy S.; Breinbjerg, Olav; Branner, Kim; Markussen, Christen Malte; Jørgensen , R.; Larsen, Niels Vesterdal; Paquay, M.

    Proceedings of the 36th Annual Symposium of the Antenna Measurement Techniques Association (AMTA) . IEEE, 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  21. Published

    Dynamics, OH distributions and UV emission of a gliding arc at various flow-rates investigated by optical measurements. / Zhu, Jiajian; Sun, Zhiwei; Li, Zhongshan; Ehn, Andreas; Aldén, Marcus; Salewski, Mirko; Leipold, Frank; Kusano, Yukihiro.

    In: Journal of Physics D: Applied Physics, Vol. 47, No. 29, 2014, p. 295203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published
  23. Published

    Effect of Polymer Form and its Consolidation on Mechanical Properties and Quality of Glass/PBT Composites. / Raghavalu Thirumalai, Durai Prabhakaran; Pillai, Saju ; Charca, Samuel ; Ataollahi, Simin ; Knudsen, Hans ; Løgstrup Andersen, Tom; Bech, Jakob Ilsted; Thybo Thomsen, Ole ; Lilholt, Hans.

    In: Applied Composite Materials, Vol. 21, 2014, p. 301–324.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  24. Published

    Effect of Processing Conditions on Fracture Resistance and Cohesive Laws of Binderfree All-Cellulose Composites. / Goutianos, Stergios; Arévalo, R.; Sørensen, Bent F.; Peijs, T.

    In: Applied Composite Materials, Vol. 21, No. 6, 2014, p. 805-825.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  25. Published
  26. Published
  27. Published

    Estimation of axial stiffness of plant fibres from compaction of non-woven mats. / Gamstedt, E. K.; Bommier, E.; Madsen, Bo.

    In: Measurement Science and Technology, Vol. 25, No. 3, 035601, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

Previous 1 2 3 4 5 6 7 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word