Composits and Materials Mechanics

  1. 2014
  2. Published

    A Critical Review of Future Materials for Wind Turbine Blades. / Raghavalu Thirumalai, Durai Prabhakaran.

    In: International Journal of Materials Engineering Innovation, Vol. 5, No. 2, 2014, p. 81-99.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  3. Published

    Altered Biomechanics of a Perthes' Hip Investigated by Contact Modeling. / Salmingo, Remel A.; Skytte, T. L. ; Traberg, Marie Sand; Mikkelsen, Lars Pilgaard; Henneberg, Kaj-Åge; Wong, C.

    2014. Abstract from 7th World Congress of Biomechanics, Boston, MA, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  4. Published

    Analysis of glass fibre sizing. / Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl; Almdal, Kristoffer.

    Proceedings of the 28th International Conference on Surface Modification Technologies. 2014.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2014

  5. Published
  6. Published

    Atmospheric Pressure Plasma Processing for Polymer Adhesion: A Review. / Kusano, Yukihiro.

    In: Journal of Adhesion, Vol. 90, No. 9, 2014, p. 755-777.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  7. Published

    Chemorheological study of a polyfurfuryl alcohol resinsystem — Pre-gel curing stage. / Dominguez, J.C.; Madsen, Bo.

    In: Industrial Crops and Products, Vol. 52, 2014, p. 321– 328.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  8. Published

    Composite recycling: Characterizing end of life wind turbine blade material. / Beauson, Justine; Bech, Jakob Ilsted; Brøndsted, Povl.

    Proceedings of 19th International Conference on Composite Materials. 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  9. Published

    Consequence of reduced necrotic bone elastic modulus in a Perthes' hip. / Salmingo, Remel A.; Skytte, Tina Lercke; Mikkelsen, Lars Pilgaard; Henneberg, Kaj-Åge; Wong, Christian.

    2014. Abstract from Nordic Orthopaedic Federation Congress 2014, Helsinki, Finland.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2014

  10. Published

    Correction of Gauge Factor for Strain Gauges Used in Polymer Composite Testing. / Zike, Sanita; Mikkelsen, Lars Pilgaard.

    In: Experimental Mechanics, Vol. 54, No. 3, 2014, p. 393-403.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  11. Published

    Damage evolution under cyclic multiaxial stress state: A comparative analysis between glass/epoxy laminates and tubes. / Quaresimin, M.; Carraro, P.A.; Mikkelsen, Lars Pilgaard; Lucato, N.; Vivian, L.; Brøndsted, Povl; Sørensen, Bent F.; Varna, J.; Talreja, R.

    In: Composites Part B: Engineering, Vol. 61, 2014, p. 282–290.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  12. Published

    Design of a fibrous composite preform for wind turbine rotor blades. / Hansen, Jens Zangenberg; Brøndsted, Povl; Kofoed, M.

    In: Materials & Design, Vol. 56, 2014, p. 635-641.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  13. Published

    Dynamics, OH distributions and UV emission of a gliding arc at various flow-rates investigated by optical measurements. / Zhu, Jiajian; Sun, Zhiwei; Li, Zhongshan; Ehn, Andreas; Aldén, Marcus; Salewski, Mirko; Leipold, Frank; Kusano, Yukihiro.

    In: Journal of Physics D: Applied Physics, Vol. 47, No. 29, 2014, p. 295203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  14. E-pub ahead of print

    Effect of Processing Conditions on Fracture Resistance and Cohesive Laws of Binderfree All-Cellulose Composites. / Goutianos, Stergios; Arévalo, R.; Sørensen, Bent F.; Peijs, T.

    In: Applied Composite Materials, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  15. Published
  16. Accepted
  17. Published

    Estimation of axial stiffness of plant fibres from compaction of non-woven mats. / Gamstedt, E. K.; Bommier, E.; Madsen, Bo.

    In: Measurement Science and Technology, Vol. 25, No. 3, 035601, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  18. Accepted
  19. Published

    Fatigue damage propagation in unidirectional glass fibre reinforced composites made of a non-crimp fabric. / Hansen, Jens Zangenberg; Brøndsted, Povl; Gillespie Jr., John W.

    In: Journal of Composite Materials, Vol. 48, No. 22, 2014, p. 2711-2727.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  20. Published

    Fatigue of hybrid glass/carbon composites: 3D computational studies. / Dai, Gaoming; Mishnaevsky, Leon.

    In: Composites Science and Technology, Vol. 94, 2014, p. 71-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  21. Published

    Fatigue of multiscale composites with secondary nanoplatelet reinforcement: 3D computational analysis. / Dai, Gaoming; Mishnaevsky, Leon, Jr.

    In: Composites Science and Technology, Vol. 91, 2014, p. 71-81.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  22. Published

    Gradient ultrafine-grained titanium: Computational study of mechanical and damage behavior. / Liu, Hongsheng; Mishnaevsky, Leon.

    In: Acta Materialia, Vol. 71, 2014, p. 220-233.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  23. Published

    Hybrid and hierarchical nanoreinforced polymer composites: Computational modelling of structure–properties relationships. / Mishnaevsky, Leon; Dai, Gaoming.

    In: Composite Structures, Vol. 117, 2014, p. 156-168.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  24. Published

    Hybrid carbon/glass fiber composites: Micromechanical analysis of structure–damage resistance relationships. / Mishnaevsky, Leon; Dai, Gaoming.

    In: Computational Materials Science, Vol. 81, 2014, p. 630-640.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  25. Accepted

    Mechanical characterization and fractography studies of Glass/PA6 composites. / Raghavalu Thirumalai, Durai Prabhakaran; Pillai, Saju ; Charca, Samuel ; Ataollahi, Simin ; Knudsen, Hans ; Løgstrup Andersen, Tom; Bech, Jakob Ilsted; Thybo Thomsen, Ole ; Lilholt, Hans.

    In: Polymer Composites, 2014.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  26. Published

    Micro-macro understanding of fatigue of fibre composites. / Sørensen, Bent F.

    Department of Wind Energy Annual Report 2013. ed. / Berit C. Larsen; Jens Carsten Hansen; Tom Cronin. DTU Wind Energy, 2014. p. 17.

    Publication: CommunicationReport chapter – Annual report year: 2014

  27. Published
  28. Published

    Micro-Plasto-Hydrodynamic Lubrication a Fundamental Mechanism in Cold Rolling. / Laugier, Maxime; Boman, Romain; Legrand, Nicolas; Ponthot, Jean Philippe; Tornicelli, Maurice; Bech, Jakob Ilsted; Carretta, Yves.

    In: Advanced Materials Research, Vol. 966-967, 2014, p. 228-241.

    Publication: Research - peer-reviewConference article – Annual report year: 2014

  29. Published

    Mixed Mode cohesive law with interface dilatation. / Sørensen, Bent F.; Goutianos, Stergios.

    In: Mechanics of Materials, Vol. 70, 2014, p. 76-93.

    Publication: Research - peer-reviewJournal article – Annual report year: 2014

  30. Published

    Natural Composites: Cellulose Fibres and the related Performance of Composites. / Lilholt, Hans; Madsen, Bo.

    In: International Journal of Materials Engineering Innovation, Vol. 5, No. 2, 2014, p. 100-111.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  31. Published
  32. Published
  33. E-pub ahead of print
  34. Published

    Towards an industrial manufactured morphing trailing edge flap system for wind turbines. / Aagaard Madsen , Helge; Løgstrup Andersen, Tom; Bergami, Leonardo; Jørgensen, Johnny Egtved; Candela Garolera, Anna; Holbøll, Joachim; Schettler, T.; Michels, P.; Schoebel, M.; Heisterberg, M.; Christensen, M.B.

    Proceedings of EWEA 2014. European Wind Energy Association (EWEA), 2014.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2014

  35. Published

    Towards an Industrial Manufactured Morphing Trailing Edge Flap System for Wind Turbines. / Aagaard Madsen , Helge; Løgstrup Andersen, Tom; Bergami, Leonardo; Jørgensen, Johnny Egtved; Candela Garolera, Anna; Holbøll, Joachim; Schettler, T.; Michels, P.; Schoebel, M.; Heisterberg, M.; Christensen, M.B.

    2014. Poster session presented at European Wind Energy Conference & Exhibition 2014, Barcelona, Spain.

    Publication: Research - peer-reviewPoster – Annual report year: 2014

  36. 2013
  37. Published

    2D micromechanical analysis of SiC/Al metal matrix composites under tensile, shear and combined tensile/shear loads. / Qing, Hai.

    In: Materials & Design, Vol. 51, 2013, p. 438-447.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  38. Published

    3D in situ observations of glass fibre/matrix interfacial debonding. / Martyniuk, Karolina; Sørensen, Bent F.; Modregger, Peter; Lauridsen, Erik Mejdal.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 55, 2013, p. 63-73.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  39. Published
  40. Published
  41. Published

    Advances in wind turbine blade design and materials. / Brøndsted, Povl (Editor); Nijssen, Rogier (Editor).

    Woodhead Publishing, 2013. 484 p. (Woodhead Publishing Series in Energy; No. 47).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  42. Published

    A fractional derivative approach to full creep regions in salt rock. / Zhou, H. W.; Wang, C. P.; Mishnaevsky, Leon; Duan, Z. Q.; Ding, J. Y.

    In: Mechanics of Time Dependent Materials, Vol. 17, No. 3, 2013, p. 413-425.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  43. Published
  44. Published

    A new theoretical model of the quasistatic single-fiber pullout problem: Analysis of stress field. / Qing, Hai.

    In: Mechanics of Materials, Vol. 60, 2013, p. 66-79.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  45. Published

    Application for Wind Turbine Blades. / McGugan, Malcolm.

    New Trends in Structural Health Monitoring. ed. / Wieslaw Ostachowicz; Alfredo Güemes . Springer, 2013. p. 373-427 (International Centre for Mechanical Sciences. Courses and Lectures, Vol. 542).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  46. Published

    Biobased composites: materials, properties and potential applications as wind turbine blade materials. / Madsen, Bo; Brøndsted, Povl; Løgstrup Andersen, Tom.

    Advances in wind turbine blade design and materials. ed. / Povl Brøndsted; Rogier Nijssen. Woodhead Publishing, 2013. (Woodhead Publishing Series in Energy; No. 47).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  47. Published

    Bonding characteristics of glass seal/metallic interconnect for SOFC applications: Comparative study on chemical and mechanical properties of the interface. / Abdoli, Hamid ; Alizadeh, Parvin ; Boccaccini, Dino; Frandsen, Henrik Lund; Sørensen, Bent F.; Molin, Sebastian; Agersted, Karsten.

    2013. Poster session presented at 13th International Conference of the European Ceramic Society, Limoges, France.

    Publication: Research - peer-reviewPoster – Annual report year: 2013

  48. Published

    Bondlines – Online blade measurements (October 2012 and January 2013). / McGugan, Malcolm; Chiesura, Gabriele .

    DTU Wind Energy, 2013. 68 p. (DTU Wind Energy E; No. 0036(EN)).

    Publication: ResearchReport – Annual report year: 2013

  49. Published

    Compressive damage mechanism of GFRP composites under off-axis loading: Experimental and numerical investigations. / Zhou, H.W.; Li, H.Y.; Gui, L.L.; Dai, Gaoming; Peng, R.D.; Wang, H.W.; Mishnaevsky, Leon.

    In: Composites Part B: Engineering, Vol. 55, 2013, p. 119-127.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  50. Published

    Damage evolution in nanoclay-reinforced polymers: A three-dimensional computational study. / Dai, Gaoming; Mishnaevsky, Leon.

    In: Composites Science and Technology, Vol. 74, 2013, p. 67-77.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  51. Published

    DCB Test Sample Design for Micro-Mechanical Testing. / Zike, Sanita; Mikkelsen, Lars Pilgaard; Sørensen, Bent F.

    The 19th International Conference on Composite Materials. ICCM19 Secretariat, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  52. Published

    Design and manufacturing of a morphing flap for wind turbine blades. / Andersen, Peter Bjørn; Aagaard Madsen , Helge; Løgstrup Andersen, Tom; Schettler, Thomas.

    Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013). Politecnico di Torino, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  53. Published

    Determination of the gel point of a polyfurfuryl alcohol resin and characterization of its curing rheokinetics. / Dominguez, Juan Carlos; Madsen, Bo.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 209-216.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  54. Published
  55. Published

    Editorial: Selected Publications of the EU FP7 project VIRTUAL NANOTITANIUM. / Mishnaevsky, Leon; Levashov, Evgeny .

    In: Computational Materials Science, Vol. 76, 2013, p. 1-2.

    Publication: Research - peer-reviewEditorial – Annual report year: 2013

  56. Published

    Effect of consolidation pressure on volumetric composition and stiffness of unidirectional flax fibre composites. / Aslan, Mustafa ; Mehmood, S.; Madsen, Bo.

    In: Journal of Materials Science, Vol. 48, 2013, p. 3812–3824.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  57. E-pub ahead of print

    Effect of Polymer Form and its Consolidation on Mechanical Properties and Quality of Glass/PBT Composites. / Raghavalu Thirumalai, Durai Prabhakaran; Pillai, Saju ; Charca, Samuel ; Ataollahi, Simin ; Knudsen, Hans ; Løgstrup Andersen, Tom; Bech, Jakob Ilsted; Thybo Thomsen, Ole ; Lilholt, Hans.

    In: Applied Composite Materials, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  58. Published

    Effect of processing on fracture of binderfree all-cellulose composites. / Goutianos, Stergios; Arevalo, R.; Sørensen, Bent F.; Peijs, T.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 233-240.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  59. Published

    Experimental and numerical study of the micro-mechanical failure in composites. / Ashouri Vajari, Danial; Martyniuk, Karolina; Sørensen, Bent F.; Legarth, Brian Nyvang.

    Proceedings of the 19th International Conference on Composite Materials . Canadian Association for Composite Structures and Materials, 2013. p. 5853-5863.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  60. Published

    Experimental Assessments and Analysis of Steel Fibre/Polyester Composites - Interface and Compression Failures. / Raghavalu Thirumalai, Durai Prabhakaran; Lilholt, Hans; Mikkelsen, Lars Pilgaard; Sørensen, Bent F.

    Conference abstracts - International Conference on Future Technologies for Wind Energy. Wyoming, USA, 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  61. Published
  62. Published

    Fatigue as a design driver for composite wind turbine blades. / Nijssen, R.; Brøndsted, Povl.

    Advances in wind turbine blade design and materials. ed. / Povl Brøndsted; Rogier Nijssen. Woodhead Publishing, 2013. (Woodhead Publishing Series in Energy; No. 47).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  63. Published

    Fatigue R=0.1 E-series Reichhold. / Rasmussen, Steffen.

    DTU Wind Energy, 2013. (DTU Wind Energy I; No. 51).

    Publication: ResearchReport – Annual report year: 2013

  64. Published
  65. Published

    Implementing Advanced Materials Models in a Commercial Finite Element Code. / Mikkelsen, Lars Pilgaard (Invited author); Mishnaevsky, Leon (Invited author).

    2013. Abstract from NAFEMS NORDIC Seminar 2013, Lund, Sweden.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  66. Published

    Improved Compression Strength of Carbon/Glass/Epoxy Hybrid Composites. / Markussen, Christen Malte; Løgstrup Andersen, Tom; Madsen, Bo; Raghavalu Thirumalai, Durai Prabhakaran; Nielsen, Michael Wenani; Lilholt, Hans.

    Proceedings of the 19th International Conference on Composite Materials (ICCM). 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  67. Published
  68. Published

    Interface debond crack growth in tension–tension cyclic loading of single fiber polymer composites. / Pupurs, Andrejs ; Goutianos, Stergios; Brøndsted, Povl; Varna, Janis.

    In: Composites Part A: Applied Science and Manufacturing, Vol. 44, 2013, p. 86-94.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  69. E-pub ahead of print
  70. Published
  71. Published

    Mesh dependency of smeared-out non-linear composite finite element models of compressive failure mechanism in composite materials. / Mikkelsen, Lars Pilgaard.

    2013. Abstract from XII International Conference on Computational Plasticity. Fundamentals and Applications, Barcelona, Spain.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  72. Published

    Micromechanical modelling of wind turbine blade materials. / Mishnaevsky, Leon.

    Advances in wind turbine blade design and materials. ed. / Povl Brøndsted; Rogier Nijssen. Woodhead Publishing, 2013. (Woodhead Publishing Series in Energy; No. 47).

    Publication: Research - peer-reviewBook chapter – Annual report year: 2013

  73. E-pub ahead of print

    Microscale damage mechanisms and degradation of fiber-reinforced composites for wind energy applications: results of Danish–Chinese collaborative investigations. / Mishnaevsky, Leon; Zhou, H.W.; Yi, H.Y.; Peng, R.D.; Wang, H.W.; Dai, Gaoming; Gui, L.L.; Zhang, X.

    In: Journal of Composite Materials, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  74. Published

    Microstructure and Mechanical Properties of Aligned Natural Fibre Composites. / Rask, Morten; Lauridsen, Erik Mejdal (Supervisor); Sørensen, Bent F. (Main supervisor); Madsen, Bo (Supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 173 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  75. Published

    Monitoring debond crack propagation and pullouts for a composite interface – Pullout tests. / Raghavalu Thirumalai, Durai Prabhakaran; Sørensen, Bent F.; Lilholt, Hans; McGugan, Malcolm.

    Proceedings of 12th Deformation and Fracture of Composites (DFC-12) & 6th Structural Integrity and Multi-scale Modelling (SI-6). 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  76. Published

    Multivariate data-driven modelling and pattern recognition for damage detection and identification for acoustic emission and acousto-ultrasonics. / Torres-Arredondo, M.A.; Tibaduiza, D.-A.; McGugan, Malcolm; Toftegaard, Helmuth Langmaack; Borum, Kaj Kvisgaard; Mujica, L.E.; Rodellar, J.; Fritzen, C.-P.

    In: Smart Materials and Structures, Vol. 22, 105023, 2013.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  77. Published

    Optical diagnostics of a gliding arc. / Sun, Z.W.; Zhu, J.J.; Li, Z.S.; Aldén, M.; Leipold, Frank; Salewski, Mirko; Kusano, Yukihiro.

    In: Optics Express, Vol. 21, No. 5, 2013, p. 6028-6044.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  78. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos; Stolpe, Mathias.

    2013. Abstract from 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  79. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos (Author); Stolpe, Mathias (Author); Lund, Erik (Author); Sørensen, René (Author).

    2013. 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, United States, 19/05/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  80. Published

    Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization. / Marmaras, Konstantinos (Author); Stolpe, Mathias (Author); Lund, Erik (Author); Sørensen, René (Author).

    2013. DCAMM 14th internal Symposium, Nyborg, Denmark, 13/03/13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  81. Published

    Performance of Biodegradable Polymers used in Mechanically Loaded Implants. / Andersen, Lonnie Ulrich; Lauritzen, Jes Bruun (Supervisor); Brøndsted, Povl (Main supervisor).

    Kgs. Lyngby : Technical University of Denmark, 2013. 139 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  82. Published

    Polymer Nanocomposites for Wind Energy Applications: Perspectives and Computational Modeling. / Mishnaevsky, Leon; Zhou, H.W.; Peng, R.D.; Dai, Gaoming; Wang, H.W.

    In: Proceedings of the International Conference Nanomaterials : Applications and Properties, Vol. 2, No. 4, 2013, p. 04NEA07.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  83. Published
  84. Published
  85. Published

    Pretreatment of the macroalgae Chaetomorpha linum for the production of bioethanol - Comparison of five pretreatment technologies. / Schultz-Jensen, Nadja; Thygesen, Anders; Thomsen, Sune Tjalfe; Leipold, Frank; Roslander, Christian; Lilholt, Hans; Bjerre, Anne Belinda.

    In: Bioresource Technology, Vol. 140, 2013, p. 36-42.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  86. Published

    Process conditions and volumetric composition in composites. / Madsen, Bo (Invited author).

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 37-54.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  87. Published

    Processing of fibre composites – challenges for maximum materials performance. / Madsen, Bo (Editor); Lilholt, Hans (Editor); Kusano, Yukihiro; Fæster, Søren; Ralph, B.

    DTU Wind Energy, 2013. 410 p. (Risoe International Symposium on Materials Science. Proceedings; No. 34).

    Publication: Research - peer-reviewBook – Annual report year: 2013

  88. Published

    Quantitative analysis of length-diameter distribution and cross-sectional properties of fibers from three-dimensional tomographic images. / Miettinen, Arttu; Joffe, Roberts; Madsen, Bo; Nättinen, Kalle; Nättinen, Kalle.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 303-311.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  89. Published
  90. Published

    Secondary stress effects during load introduction into unidirectional composite test coupons. / Mikkelsen, Lars Pilgaard; Bech, Jakob Ilsted.

    6th International Conference on Composites Testing and Model Identification. ed. / O.T. Thomsen; Bent F. Sørensen; Christian Berggreen. 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  91. Published
  92. Published

    Stiffness of carbon fibre epoxy composite tube. / Mikkelsen, Lars Pilgaard.

    DTU Wind Energy, 2013. (DTU Wind Energy I; No. 160).

    Publication: ResearchReport – Annual report year: 2013

  93. Published

    Strain Gauge Application in Soft Material Testing. / Zike, Sanita; Mikkelsen, Lars Pilgaard.

    6th International Conference on Composites Testing and Model Identification. ed. / O.T. Thomsen; Bent F. Sørensen; Christian Berggreen. Aalborg University, 2013.

    Publication: Research - peer-reviewConference abstract in proceedings – Annual report year: 2013

  94. Published
  95. Published

    Tensile and compression properties of hybrid composites – A comparative study. / Raghavalu Thirumalai, Durai Prabhakaran; Løgstrup Andersen, Tom; Markussen, Christen Malte; Madsen, Bo; Lilholt, Hans.

    Proceedings of the 19th International Conference on Composite Materials (ICCM19). Canadian Association for Composite Structures and Materials, 2013. p. 1029-1035.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  96. Published

    Testing composites for wind turbine blades. / Mikkelsen, Lars Pilgaard.

    2013. Abstract from International Conference on Future Technologies for Wind Energy, Laramie, Wyoming, United States.

    Publication: Research - peer-reviewConference abstract for conference – Annual report year: 2013

  97. Published

    The effects of fibre architecture on fatigue life-time of composite materials. / Hansen, Jens Zangenberg; Brøndsted, Povl (Main supervisor); Østergaard, Rasmus.

    DTU Wind Energy, 2013. 188 p. (DTU Wind Energy PhD; No. 0018(EN)).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  98. Published

    Ultrasound enhanced 50 Hz plasma treatment of glass-fiber-reinforced polyester at atmospheric pressure. / Kusano, Yukihiro; Norrman, Kion; Singh, Shailendra Vikram; Leipold, Frank; Morgen, P.; Bardenshtein, A.; Krebs, N.

    In: Journal of Adhesion Science and Technology, Vol. 27, No. 7, 2013, p. 825–833.

    Publication: Research - peer-reviewJournal article – Annual report year: 2012

  99. Published

    Uncertainty modelling and code calibration for composite materials. / Toft, Henrik Stensgaard; Branner, Kim; Mishnaevsky, Leon, Jr; Sørensen, John Dalsgaard.

    In: Journal of Composite Materials, Vol. 47, No. 14, 2013, p. 1729-1747.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  100. Published

    Volumetric composition in composites and historical data. / Lilholt, Hans; Madsen, Bo.

    In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 279-294.

    Publication: Research - peer-reviewConference article – Annual report year: 2013

  101. Published

    Water-cooled non-thermal gliding arc for adhesion improvement of glass-fibre-reinforced polyester. / Kusano, Yukihiro; Sørensen, Bent F.; Løgstrup Andersen, Tom; Toftegaard, Helmuth Langmaack; Leipold, Frank; Salewski, Mirko; Sun, Zhiwei; Zhu, Jiajian; Li, Zhongshan; Alden, Marcus.

    In: Journal of Physics D: Applied Physics, Vol. 46, No. 13, 2013, p. 135203.

    Publication: Research - peer-reviewJournal article – Annual report year: 2013

  102. Published

    Wire tensile test kobber Poly-Tech. / Rasmussen, Steffen.

    DTU Wind Energy, 2013. (DTU Wind Energy I; No. 68).

    Publication: ResearchReport – Annual report year: 2013

Previous 1 2 Next
Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word