Aeroelastic Design

  1. Published

    1st DeepWind 5 MW Baseline design. / Schmidt Paulsen, Uwe; Vita, Luca; Aagaard Madsen , Helge; Hattel, Jesper Henri; Ritchie, Ewen; Leban, Krisztina M.; Berthelsen, Petter A.; Carstensen, Stefan.

    In: Energy Procedia, Vol. 24, 2012, p. 27-35.

    Publication: Research - peer-reviewConference article – Annual report year: 2012

  2. Published

    Adaptive Trailing Edge Flaps for Load Reduction. / Bergami, Leonardo.

    2011. Paper presented at 7th PhD Seminar on Wind Energy in Europe, Delft, Netherlands.

    Publication: ResearchPaper – Annual report year: 2012

  3. Published

    Aeroacoustic noise sources and their characterization. / Aagaard Madsen , Helge (Invited author); Fischer, Andreas (Invited author); Bertagnolio, Franck (Invited author); Bak, Christian (Invited author).

    2012. EWEA’s third technology workshop on Wind Turbine Noise: From Source to Receiver, Oxford, United Kingdom, 11-12-12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  4. Published

    A global Navier-Stokes rotor prediction model. / Hansen, Martin Otto Lavér; Sørensen, Jens Nørkær; Michelsen, Jess A.; Sørensen, Niels N.

    In: 35th Aerospace Sciences Meeting and Exhibition. Vol. AIAA-97-0970 Washington, DC : American Institute of Aeronautics and Astronautics, 1997.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 1997

  5. Published

    A Greedy Algorithm for a Special Class of Geometric Set Covering Problems. / Stolpe, Mathias; Bechmann, Andreas.

    DTU Wind Energy, 2012. 9 p. (DTU Wind Energy E; No. 0013(EN)).

    Publication: ResearchReport – Annual report year: 2012

  6. Published

    A Model Based Control methodology combining Blade Pitch and Adaptive Trailing Edge Flaps in a common framework. / Henriksen, Lars Christian (Author); Bergami, Leonardo (Author); Andersen, Peter Bjørn (Author).

    2013. EWEA 2013 - European Wind Energy Conference & Exhibition, Vienna, Austria, 04-02-13.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2013

  7. Published

    A Model Based Control methodology combining Blade Pitch and Adaptive Trailing Edge Flaps in a common framework. / Henriksen, Lars Christian; Bergami, Leonardo; Andersen, Peter Bjørn.

    In: Proceedings of EWEA 2013. EWEA - The European Wind Energy Association, 2013.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2013

  8. Published
  9. Published

    Analysis of 3D Stall Models for Wind Turbine Blades Using Data from the MEXICO Experiment. / Guntur, Srinivas; Bak, Christian; Sørensen, Niels N.

    In: Proceedings of the 13th International Conference on Wind Engineering. 2012.

    Publication: Research - peer-reviewArticle in proceedings – Annual report year: 2012

  10. Published

    Analysis of VAWT aerodynamics and design using the Actuator Cylinder flow model. / Aagaard Madsen , Helge (Author); Schmidt Paulsen, Uwe (Author); Vita, Luca (Author).

    2012. The science of Making Torque from Wind 2012, Oldenburg, Germany, 09-10-12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

Previous 1 2 3 4 5 6 7 8 ...14 Next