Composites Part A: Applied Science and Manufacturing
ISSNs: 1359-835X, 1359-835x
Pergamon Press, United Kingdom
BFI (2017): BFI-level 2, Scopus rating (2016): CiteScore 4.82 SJR 1.402 SNIP 2.053, ISI indexed (2013): ISI indexed yes, Web of Science (2017): Indexed Yes
Central database
Journal
- 2017
- Published
Individual fibre segmentation from 3D X-ray computed tomography for characterising the fibre orientation in unidirectional composite materials. / Emerson, Monica Jane; Jespersen, Kristine Munk; Dahl, Anders Bjorholm; Conradsen, Knut; Mikkelsen, Lars Pilgaard.
In: Composites Part A: Applied Science and Manufacturing, Vol. 97, 2017, p. 83–92.Publication: Research - peer-review › Journal article – Annual report year: 2017
- Published
Oxidation of lignin in hemp fibres by laccase: effects on mechanical properties of hemp fibres and unidirectional fibre/epoxy composites. / Liu, Ming; Baum, Andreas; Odermatt, Jürgen; Berger, Jens; Yu, Liyun; Zeuner, Birgitte; Thygesen, Anders; Holck, Jesper; Meyer, Anne S.
In: Composites Part A: Applied Science and Manufacturing, Vol. 95, 2017, p. 377–387.Publication: Research - peer-review › Journal article – Annual report year: 2017
- 2016
- Published
Controlled retting of hemp fibres: Effect of hydrothermal pre-treatmen tand enzymatic retting on the mechanical properties of unidirectiona lhemp/epoxy composites. / Liu, Ming; Silva, Diogo Alexandre Santos; Fernando, Dinesh; Meyer, Anne S.; Madsen, Bo; Daniel, Geoffrey; Thygesen, Anders.
In: Composites Part A: Applied Science and Manufacturing, Vol. 88, 2016, p. 253–262.Publication: Research - peer-review › Journal article – Annual report year: 2016
- Published
Effect of pectin and hemicellulose removal from hemp fibres on the mechanical properties of unidirectional hemp/epoxy composites. / Liu, Ming; Meyer, Anne S.; Fernando, Dinesh; Silva, Diogo Alexandre Santos; Daniel, Geoffrey; Thygesen, Anders.
In: Composites Part A: Applied Science and Manufacturing, Vol. 90, 2016, p. 724-735.Publication: Research - peer-review › Journal article – Annual report year: 2016
Excellent dielectric properties of PVDF-based composites filled with carbonized PAN/PEG copolymer fibers. / Guo, Qikai; Xue, Qingzhong ; Wu, Tiantian; Pan, Xinglong; Zhang, Jianqiang; Li, Xiaofang; Zhu, Lei .
In: Composites Part A: Applied Science and Manufacturing, Vol. 87, 2016, p. 46-53.Publication: Research - peer-review › Journal article – Annual report year: 2016
- Published
Recycling of shredded composites from wind turbine blades in new thermoset polymer composites. / Beauson, Justine; Madsen, Bo; Toncelli, Chiara; Brøndsted, Povl; Bech, Jakob Ilsted.
In: Composites Part A: Applied Science and Manufacturing, Vol. 90, 2016, p. 390-399.Publication: Research - peer-review › Journal article – Annual report year: 2016
- 2015
- Published
Non-destructive automatic determination of aspect ratio and cross-sectional properties of fibres. / Miettinen, Arttu; Ojala, Antti; Wikström, Lisa; Joffe, Roberts; Madsen, Bo; Nättinen, Kalle; Kataja, Markku .
In: Composites Part A: Applied Science and Manufacturing, Vol. 77, 2015, p. 188–194.Publication: Research - peer-review › Journal article – Annual report year: 2015
- 2013
- Published
3D in situ observations of glass fibre/matrix interfacial debonding. / Martyniuk, Karolina; Sørensen, Bent F.; Modregger, Peter; Lauridsen, Erik Mejdal.
In: Composites Part A: Applied Science and Manufacturing, Vol. 55, 2013, p. 63-73.Publication: Research - peer-review › Journal article – Annual report year: 2013
- Published
Interface debond crack growth in tension–tension cyclic loading of single fiber polymer composites. / Pupurs, Andrejs ; Goutianos, Stergios; Brøndsted, Povl; Varna, Janis.
In: Composites Part A: Applied Science and Manufacturing, Vol. 44, 2013, p. 86-94.Publication: Research - peer-review › Journal article – Annual report year: 2013
- Published
Quantitative study on the statistical properties of fibre architecture of genuine and numerical composite microstructures. / Hansen, Jens Zangenberg; Brøndsted, Povl.
In: Composites Part A: Applied Science and Manufacturing, Vol. 47, 2013, p. 124-134.Publication: Research - peer-review › Journal article – Annual report year: 2013